Advanced Bash−Scripting Guide An in−depth exploration of the art of shell scripting Mendel Cooper 2.6 15 March 2004 Revision History Revision 2.4 25 January 2004 'MUSKMELON' release: Bugfixes. Revision 2.5 15 February 2004 'STARFRUIT' release: Bugfixes and more material. Revision 2.6 15 March 2004 'SALAL' release: Minor update. Revised by: mc Revised by: mc Revised by: mc This tutorial assumes no previous knowledge of scripting or programming, but progresses rapidly toward an intermediate/advanced level of instruction . . . all the while sneaking in little snippets of Unix® wisdom and lore. It serves as a textbook, a manual for self−study, and a reference and source of knowledge on shell scripting techniques. The exercises and heavily−commented examples invite active reader participation, under the premise that the only way to really learn scripting is to write scripts. This book is suitable for classroom use as a general introduction to programming concepts. The latest update of this document, as an archived, bzip2−ed "tarball" including both the SGML source and rendered HTML, may be downloaded from the author's home site. See the change log for a revision history. Dedication For Anita, the source of all the magic Advanced Bash−Scripting Guide Table of Contents Chapter 1. Why Shell Programming?...............................................................................................................1 Chapter 2. Starting Off With a Sha−Bang.......................................................................................................3 2.1. Invoking the script............................................................................................................................5 2.2. Preliminary Exercises.......................................................................................................................5 Part 2. Basics.......................................................................................................................................................6 Chapter 3. Special Characters...........................................................................................................................7 Chapter 4. Introduction to Variables and Parameters ..................................................................................23 4.1. Variable Substitution......................................................................................................................23 4.2. Variable Assignment......................................................................................................................25 . 4.3. Bash Variables Are Untyped..........................................................................................................26 4.4. Special Variable Types...................................................................................................................28 Chapter 5. Quoting...........................................................................................................................................32 Chapter 6. Exit and Exit Status.......................................................................................................................38 Chapter 7. Tests................................................................................................................................................40 7.1. Test Constructs...............................................................................................................................40 7.2. File test operators............................................................................................................................46 7.3. Comparison operators (binary).......................................................................................................49 7.4. Nested if/then Condition Tests.......................................................................................................54 7.5. Testing Your Knowledge of Tests..................................................................................................54 Chapter 8. Operations and Related Topics....................................................................................................55 8.1. Operators.........................................................................................................................................55 8.2. Numerical Constants.......................................................................................................................61 Part 3. Beyond the Basics.................................................................................................................................63 Chapter 9. Variables Revisited........................................................................................................................64 9.1. Internal Variables............................................................................................................................64 9.2. Manipulating Strings .......................................................................................................................80 9.2.1. Manipulating strings using awk............................................................................................84 9.2.2. Further Discussion .................................................................................................................85 9.3. Parameter Substitution....................................................................................................................85 9.4. Typing variables: declare or typeset...............................................................................................93 9.5. Indirect References to Variables.....................................................................................................95 9.6. $RANDOM: generate random integer............................................................................................97 9.7. The Double Parentheses Construct...............................................................................................106 Chapter 10. Loops and Branches..................................................................................................................108 10.1. Loops..........................................................................................................................................108 10.2. Nested Loops..............................................................................................................................119 10.3. Loop Control...............................................................................................................................119 i Advanced Bash−Scripting Guide Table of Contents Chapter 10. Loops and Branches 10.4. Testing and Branching................................................................................................................123 Chapter 11. Internal Commands and Builtins.............................................................................................130 11.1. Job Control Commands..............................................................................................................151 Chapter 12. External Filters, Programs and Commands...........................................................................156 12.1. Basic Commands........................................................................................................................156 12.2. Complex Commands ...................................................................................................................160 12.3. Time / Date Commands..............................................................................................................169 12.4. Text Processing Commands ........................................................................................................172 12.5. File and Archiving Commands...................................................................................................188 12.6. Communications Commands......................................................................................................203 12.7. Terminal Control Commands.....................................................................................................207 12.8. Math Commands.........................................................................................................................208 12.9. Miscellaneous Commands..........................................................................................................217 Chapter 13. System and Administrative Commands..................................................................................228 Chapter 14. Command Substitution.............................................................................................................252 Chapter 15. Arithmetic Expansion................................................................................................................257 Chapter 16. I/O Redirection ...........................................................................................................................258 16.1. Using exec ...................................................................................................................................260 16.2. Redirecting Code Blocks............................................................................................................263 16.3. Applications................................................................................................................................267 Chapter 17. Here Documents.........................................................................................................................269 Chapter 18. Recess Time................................................................................................................................278 Part 4. Advanced Topics .................................................................................................................................279 Chapter 19. Regular Expressions..................................................................................................................280 19.1. A Brief Introduction to Regular Expressions ..............................................................................280 19.2. Globbing.....................................................................................................................................283 Chapter 20. Subshells.....................................................................................................................................285 Chapter 21. Restricted Shells.........................................................................................................................288 Chapter 22. Process Substitution ...................................................................................................................290 Chapter 23. Functions....................................................................................................................................292 23.1. Complex Functions and Function Complexities.........................................................................294 23.2. Local Variables...........................................................................................................................303 23.2.1. Local variables help make recursion possible...................................................................305 ii Advanced Bash−Scripting Guide Table of Contents Chapter 23. Functions 23.3. Recursion Without Local Variables............................................................................................306 Chapter 24. Aliases.........................................................................................................................................308 Chapter 25. List Constructs...........................................................................................................................311 Chapter 26. Arrays.........................................................................................................................................314 Chapter 27. Files.............................................................................................................................................340 Chapter 28. /dev and /proc.............................................................................................................................341 28.1. /dev ..............................................................................................................................................341 28.2. /proc............................................................................................................................................342 Chapter 29. Of Zeros and Nulls.....................................................................................................................347 Chapter 30. Debugging...................................................................................................................................350 Chapter 31. Options........................................................................................................................................358 Chapter 32. Gotchas.......................................................................................................................................360 Chapter 33. Scripting With Style..................................................................................................................367 33.1. Unofficial Shell Scripting Stylesheet..........................................................................................367 Chapter 34. Miscellany...................................................................................................................................370 34.1. Interactive and non−interactive shells and scripts......................................................................370 34.2. Shell Wrappers............................................................................................................................371 34.3. Tests and Comparisons: Alternatives ..........................................................................................374 34.4. Recursion....................................................................................................................................375 34.5. "Colorizing" Scripts....................................................................................................................377 34.6. Optimizations..............................................................................................................................381 34.7. Assorted Tips..............................................................................................................................382 34.8. Security Issues............................................................................................................................390 34.9. Portability Issues.........................................................................................................................391 34.10. Shell Scripting Under Windows...............................................................................................391 Chapter 35. Bash, version 2...........................................................................................................................392 Chapter 36. Endnotes.....................................................................................................................................397 36.1. Author's Note..............................................................................................................................397 36.2. About the Author........................................................................................................................397 36.3. Where to Go For Help .................................................................................................................397 36.4. Tools Used to Produce This Book..............................................................................................397 36.4.1. Hardware...........................................................................................................................397 36.4.2. Software and Printware.....................................................................................................398 36.5. Credits.........................................................................................................................................398 iii Advanced Bash−Scripting Guide Table of Contents Bibliography....................................................................................................................................................400 Appendix A. Contributed Scripts..................................................................................................................406 Appendix B. Reference Cards........................................................................................................................469 Appendix C. A Sed and Awk Micro−Primer ................................................................................................474 C.1. Sed................................................................................................................................................474 C.2. Awk..............................................................................................................................................477 Appendix D. Exit Codes With Special Meanings.........................................................................................480 Appendix E. A Detailed Introduction to I/O and I/O Redirection.............................................................481 Appendix F. Standard Command−Line Options.........................................................................................483 Appendix G. Important System Directories.................................................................................................485 Appendix H. Localization ...............................................................................................................................486 Appendix I. History Commands....................................................................................................................489 Appendix J. A Sample .bashrc File...............................................................................................................490 Appendix K. Converting DOS Batch Files to Shell Scripts........................................................................501 Appendix L. Exercises....................................................................................................................................505 L.1. Analyzing Scripts.........................................................................................................................505 L.2. Writing Scripts.............................................................................................................................506 Appendix M. Revision History .......................................................................................................................513 Appendix N. Copyright..................................................................................................................................514 iv Chapter 1. Why Shell Programming? A working knowledge of shell scripting is essential to anyone wishing to become reasonably proficient at system administration, even if they do not anticipate ever having to actually write a script. Consider that as a Linux machine boots up, it executes the shell scripts in /etc/rc.d to restore the system configuration and set up services. A detailed understanding of these startup scripts is important for analyzing the behavior of a system, and possibly modifying it. Writing shell scripts is not hard to learn, since the scripts can be built in bite−sized sections and there is only a fairly small set of shell−specific operators and options [1] to learn. The syntax is simple and straightforward, similar to that of invoking and chaining together utilities at the command line, and there are only a few "rules" to learn. Most short scripts work right the first time, and debugging even the longer ones is straightforward. A shell script is a "quick and dirty" method of prototyping a complex application. Getting even a limited subset of the functionality to work in a shell script, even if slowly, is often a useful first stage in project development. This way, the structure of the application can be tested and played with, and the major pitfalls found before proceeding to the final coding in C, C++, Java, or Perl. Shell scripting hearkens back to the classical Unix philosophy of breaking complex projects into simpler subtasks, of chaining together components and utilities. Many consider this a better, or at least more esthetically pleasing approach to problem solving than using one of the new generation of high powered all−in−one languages, such as Perl, which attempt to be all things to all people, but at the cost of forcing you to alter your thinking processes to fit the tool. When not to use shell scripts • resource−intensive tasks, especially where speed is a factor (sorting, hashing, etc.) • procedures involving heavy−duty math operations, especially floating point arithmetic, arbitrary precision calculations, or complex numbers (use C++ or FORTRAN instead) • cross−platform portability required (use C instead) • complex applications, where structured programming is a necessity (need type−checking of variables, function prototypes, etc.) • mission−critical applications upon which you are betting the ranch, or the future of the company • situations where security is important, where you need to guarantee the integrity of your system and protect against intrusion, cracking, and vandalism • project consists of subcomponents with interlocking dependencies • extensive file operations required (Bash is limited to serial file access, and that only in a particularly clumsy and inefficient line−by−line fashion) • need multi−dimensional arrays • need data structures, such as linked lists or trees • need to generate or manipulate graphics or GUIs • need direct access to system hardware • need port or socket I/O • need to use libraries or interface with legacy code • proprietary, closed−source applications (shell scripts put the source code right out in the open for all the world to see) If any of the above applies, consider a more powerful scripting language, perhaps Perl, Tcl, Python, Ruby, or possibly a high−level compiled language such as C, C++, or Java. Even then, prototyping the application as a shell script might still be a useful development step. Chapter 1. Why Shell Programming? 1 Advanced Bash−Scripting Guide We will be using Bash, an acronym for "Bourne−Again Shell" and a pun on Stephen Bourne's now classic Bourne Shell. Bash has become a de facto standard for shell scripting on all flavors of Unix. Most of the principles dealt with in this book apply equally well to scripting with other shells, such as the Korn Shell, from which Bash derives some of its features, [2] and the C Shell and its variants. (Note that C Shell programming is not recommended due to certain inherent problems, as pointed out in an October, 1993 Usenet post by Tom Christiansen.) What follows is a tutorial on shell scripting. It relies heavily on examples to illustrate various features of the shell. The example scripts work −− they've been tested −− and some of them are even useful in real life. The reader can play with the actual working code of the examples in the source archive (scriptname.sh), [3] give them execute permission (chmod u+rx scriptname), then run them to see what happens. Should the source archive not be available, then cut−and−paste from the HTML, pdf, or text rendered versions. Be aware that some of the scripts below introduce features before they are explained, and this may require the reader to temporarily skip ahead for enlightenment. Unless otherwise noted, the author of this book wrote the example scripts that follow. Chapter 1. Why Shell Programming? 2 Chapter 2. Starting Off With a Sha−Bang In the simplest case, a script is nothing more than a list of system commands stored in a file. At the very least, this saves the effort of retyping that particular sequence of commands each time it is invoked. Example 2−1. cleanup: A script to clean up the log files in /var/log # cleanup # Run as root, of course. cd /var/log cat /dev/null > messages cat /dev/null > wtmp echo "Logs cleaned up." There is nothing unusual here, just a set of commands that could just as easily be invoked one by one from the command line on the console or in an xterm. The advantages of placing the commands in a script go beyond not having to retype them time and again. The script can easily be modified, customized, or generalized for a particular application. Example 2−2. cleanup: An enhanced and generalized version of above script. #!/bin/bash # cleanup, version 2 # Run as root, of course. LOG_DIR=/var/log ROOT_UID=0 # LINES=50 # E_XCD=66 # E_NOTROOT=67 # Only users with $UID 0 have root privileges. Default number of lines saved. Can't change directory? Non−root exit error. if [ "$UID" −ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi if [ −n "$1" ] # Test if command line argument present (non−empty). then lines=$1 else lines=$LINES # Default, if not specified on command line. fi # Stephane Chazelas suggests the following, #+ as a better way of checking command line arguments, #+ but this is still a bit advanced for this stage of the tutorial. # # E_WRONGARGS=65 # Non−numerical argument (bad arg format) # # case "$1" in Chapter 2. Starting Off With a Sha−Bang 3 Advanced Bash−Scripting Guide # "" ) lines=50;; # *[!0−9]*) echo "Usage: `basename $0` file−to−cleanup"; exit $E_WRONGARGS;; # * ) lines=$1;; # esac # #* Skip ahead to "Loops" chapter to decipher all this. cd $LOG_DIR if [ `pwd` != "$LOG_DIR" ] # or if [ "$PWD" != "$LOG_DIR" ] # Not in /var/log? then echo "Can't change to $LOG_DIR." exit $E_XCD fi # Doublecheck if in right directory, before messing with log file. # far more efficient is: # # cd /var/log || { # echo "Cannot change to necessary directory." >&2 # exit $E_XCD; #} tail −$lines messages > mesg.temp # Saves last section of message log file. mv mesg.temp messages # Becomes new log directory. # cat /dev/null > messages #* No longer needed, as the above method is safer. cat /dev/null > wtmp # echo "Logs cleaned up." ': > wtmp' and '> wtmp' have the same effect. exit 0 # A zero return value from the script upon exit #+ indicates success to the shell. Since you may not wish to wipe out the entire system log, this variant of the first script keeps the last section of the message log intact. You will constantly discover ways of refining previously written scripts for increased effectiveness. The sha−bang ( #!) at the head of a script tells your system that this file is a set of commands to be fed to the command interpreter indicated. The #! is actually a two−byte [4] "magic number", a special marker that designates a file type, or in this case an executable shell script (see man magic for more details on this fascinating topic). Immediately following the sha−bang is a path name. This is the path to the program that interprets the commands in the script, whether it be a shell, a programming language, or a utility. This command interpreter then executes the commands in the script, starting at the top (line 1 of the script), ignoring comments. [5] #!/bin/sh #!/bin/bash #!/usr/bin/perl #!/usr/bin/tcl #!/bin/sed −f #!/usr/awk −f Chapter 2. Starting Off With a Sha−Bang 4 Advanced Bash−Scripting Guide Each of the above script header lines calls a different command interpreter, be it /bin/sh, the default shell (bash in a Linux system) or otherwise. [6] Using #!/bin/sh, the default Bourne Shell in most commercial variants of Unix, makes the script portable to non−Linux machines, though you may have to sacrifice a few Bash−specific features. The script will, however, conform to the POSIX [7] sh standard. Note that the path given at the "sha−bang" must be correct, otherwise an error message −− usually "Command not found" −− will be the only result of running the script. #! can be omitted if the script consists only of a set of generic system commands, using no internal shell directives. The second example, above, requires the initial #!, since the variable assignment line, lines=50, uses a shell−specific construct. Note again that #!/bin/sh invokes the default shell interpreter, which defaults to /bin/bash on a Linux machine. This tutorial encourages a modular approach to constructing a script. Make note of and collect "boilerplate" code snippets that might be useful in future scripts. Eventually you can build a quite extensive library of nifty routines. As an example, the following script prolog tests whether the script has been invoked with the correct number of parameters. if [ $# −ne Number_of_expected args ] then echo "Usage: `basename $0` whatever" exit $WRONG_ARGS fi 2.1. Invoking the script Having written the script, you can invoke it by sh scriptname, [8] or alternatively bash scriptname. (Not recommended is using sh redirection operator, truncates a file to zero length, without changing its permissions. If the file did not previously exist, creates it. : > data.xxx # File "data.xxx" now empty. # Same effect as cat /dev/null >data.xxx # However, this does not fork a new process, since ":" is a builtin. See also Example 12−14. In combination with the >> redirection operator, has no effect on a pre−existing target file (: >> target_file). If the file did not previously exist, creates it. This applies to regular files, not pipes, symlinks, and certain special files. May be used to begin a comment line, although this is not recommended. Using # for a comment turns off error checking for the remainder of that line, so almost anything may be appear in a comment. However, this is not the case with :. : This is a comment that generates an error, ( if [ $x −eq 3] ). The ":" also serves as a field separator, in /etc/passwd, and in the $PATH variable. bash$ echo $PATH /usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/usr/sbin:/usr/games ! reverse (or negate) the sense of a test or exit status. The ! operator inverts the exit status of the command to which it is applied (see Example 6−2). It also inverts the meaning of a test operator. This can, for example, change the sense of "equal" ( = ) to "not−equal" ( != ). The ! operator is a Bash keyword. In a different context, the ! also appears in indirect variable references. Chapter 3. Special Characters 10 Advanced Bash−Scripting Guide In yet another context, from the command line, the ! invokes the Bash history mechanism (see Appendix I). Note that within a script, the history mechanism is disabled. * wild card. [asterisk] The * character serves as a "wild card" for filename expansion in globbing. By itself, it matches every filename in a given directory. bash$ echo * abs−book.sgml add−drive.sh agram.sh alias.sh The * also represents any number (or zero) characters in a regular expression. * arithmetic operator. In the context of arithmetic operations, the * denotes multiplication. A double asterisk, **, is the exponentiation operator. ? test operator. Within certain expressions, the ? indicates a test for a condition. In a double parentheses construct, the ? serves as a C−style trinary operator. See Example 9−29. In a parameter substitution expression, the ? tests whether a variable has been set. ? wild card. The ? character serves as a single−character "wild card" for filename expansion in globbing, as well as representing one character in an extended regular expression. $ Variable substitution. var1=5 var2=23skidoo echo $var1 echo $var2 #5 # 23skidoo A $ prefixing a variable name indicates the value the variable holds. $ end−of−line. In a regular expression, a "$" addresses the end of a line of text. ${} Parameter substitution. $*, $@ positional parameters. $? exit status variable. The $? variable holds the exit status of a command, a function, or of the script itself. $$ process id variable. The $$ variable holds the process id of the script in which it appears. () command group. (a=hello; echo $a) A listing of commands within parentheses starts a subshell. Chapter 3. Special Characters 11 Advanced Bash−Scripting Guide Variables inside parentheses, within the subshell, are not visible to the rest of the script. The parent process, the script, cannot read variables created in the child process, the subshell. a=123 ( a=321; ) echo "a = $a" # a = 123 # "a" within parentheses acts like a local variable. array initialization. Array=(element1 element2 element3) {xxx,yyy,zzz,...} Brace expansion. grep Linux file*.{txt,htm*} # Finds all instances of the word "Linux" # in the files "fileA.txt", "file2.txt", "fileR.html", "file−87.htm", etc. A command may act upon a comma−separated list of file specs within braces. [11] Filename expansion (globbing) applies to the file specs between the braces. No spaces allowed within the braces unless the spaces are quoted or escaped. echo {file1,file2}\ :{\ A," B",' C'} file1 : A file1 : B file1 : C file2 : A file2 : B file2 : C {} Block of code. [curly brackets] Also referred to as an "inline group", this construct, in effect, creates an anonymous function. However, unlike a function, the variables in a code block remain visible to the remainder of the script. bash$ { local a; a=123; } bash: local: can only be used in a function a=123 { a=321; } echo "a = $a" # Thanks, S.C. # a = 321 (value inside code block) The code block enclosed in braces may have I/O redirected to and from it. Example 3−1. Code blocks and I/O redirection #!/bin/bash # Reading lines in /etc/fstab. Chapter 3. Special Characters 12 Advanced Bash−Scripting Guide File=/etc/fstab { read line1 read line2 } < $File echo echo echo echo echo "First line in $File is:" "$line1" "Second line in $File is:" "$line2" exit 0 Example 3−2. Saving the results of a code block to a file #!/bin/bash # rpm−check.sh # Queries an rpm file for description, listing, and whether it can be installed. # Saves output to a file. # # This script illustrates using a code block. SUCCESS=0 E_NOARGS=65 if [ −z "$1" ] then echo "Usage: `basename $0` rpm−file" exit $E_NOARGS fi { echo echo "Archive Description:" rpm −qpi $1 # Query description. echo echo "Archive Listing:" rpm −qpl $1 # Query listing. echo rpm −i −−test $1 # Query whether rpm file can be installed. if [ "$?" −eq $SUCCESS ] then echo "$1 can be installed." else echo "$1 cannot be installed." fi echo } > "$1.test" # Redirects output of everything in block to file. echo "Results of rpm test in file $1.test" # See rpm man page for explanation of options. exit 0 Chapter 3. Special Characters 13 Advanced Bash−Scripting Guide Unlike a command group within (parentheses), as above, a code block enclosed by {braces} will not normally launch a subshell. [12] {} \; pathname. Mostly used in find constructs. This is not a shell builtin. The ";" ends the −exec option of a find command sequence. It needs to be escaped to protect it from interpretation by the shell. [] test. Test expression between [ ]. Note that [ is part of the shell builtin test (and a synonym for it), not a link to the external command /usr/bin/test. [[ ]] test. Test expression between [[ ]] (shell keyword). See the discussion on the [[ ... ]] construct. [] array element. In the context of an array, brackets set off the numbering of each element of that array. Array[1]=slot_1 echo ${Array[1]} [] range of characters. As part of a regular expression, brackets delineate a range of characters to match. (( )) integer expansion. Expand and evaluate integer expression between (( )). See the discussion on the (( ... )) construct. > &> >& >> < redirection. scriptname >filename redirects the output of scriptname to file filename. Overwrite filename if it already exists. command &>filename redirects both the stdout and the stderr of command to filename. command >&2 redirects stdout of command to stderr. scriptname >>filename appends the output of scriptname to file filename. If filename does not already exist, it will be created. process substitution. Chapter 3. Special Characters 14 Advanced Bash−Scripting Guide (command)> <(command) In a different context, the "<" and ">" characters act as string comparison operators. In yet another context, the "<" and ">" characters act as integer comparison operators. See also Example 12−9. << redirection used in a here document. <, > ASCII comparison. veg1=carrots veg2=tomatoes if [[ "$veg1" < "$veg2" ]] then echo "Although $veg1 precede $veg2 in the dictionary," echo "this implies nothing about my culinary preferences." else echo "What kind of dictionary are you using, anyhow?" fi \<, \> word boundary in a regular expression. bash$ grep '\' textfile | pipe. Passes the output of previous command to the input of the next one, or to the shell. This is a method of chaining commands together. echo ls −l | sh # Passes the output of "echo ls −l" to the shell, #+ with the same result as a simple "ls −l". cat *.lst | sort | uniq # Merges and sorts all ".lst" files, then deletes duplicate lines. A pipe, as a classic method of interprocess communication, sends the stdout of one process to the stdin of another. In a typical case, a command, such as cat or echo, pipes a stream of data to a "filter" (a command that transforms its input) for processing. cat $filename | grep $search_word The output of a command or commands may be piped to a script. #!/bin/bash # uppercase.sh : Changes input to uppercase. tr 'a−z' 'A−Z' # Letter ranges must be quoted Chapter 3. Special Characters 15 Advanced Bash−Scripting Guide #+ to prevent filename generation from single−letter filenames. exit 0 Now, let us pipe the output of ls −l to this script. bash$ ls −l | ./uppercase.sh −RW−RW−R−− 1 BOZO BOZO −RW−RW−R−− 1 BOZO BOZO −RW−R−−R−− 1 BOZO BOZO 109 APR 7 19:49 1.TXT 109 APR 14 16:48 2.TXT 725 APR 20 20:56 DATA−FILE The stdout of each process in a pipe must be read as the stdin of the next. If this is not the case, the data stream will block, and the pipe will not behave as expected. cat file1 file2 | ls −l | sort # The output from "cat file1 file2" disappears. A pipe runs as a child process, and therefore cannot alter script variables. variable="initial_value" echo "new_value" | read variable echo "variable = $variable" # variable = initial_value If one of the commands in the pipe aborts, this prematurely terminates execution of the pipe. Called a broken pipe, this condition sends a SIGPIPE signal. >| force redirection (even if the noclobber option is set). This will forcibly overwrite an existing file. || OR logical operator. In a test construct, the || operator causes a return of 0 (success) if either of the linked test conditions is true. & Run job in background. A command followed by an & will run in the background. bash$ sleep 10 & [1] 850 [1]+ Done sleep 10 Within a script, commands and even loops may run in the background. Example 3−3. Running a loop in the background #!/bin/bash # background−loop.sh for i in 1 2 3 4 5 6 7 8 9 10 # First loop. do echo −n "$i " done & # Run this loop in background. # Will sometimes execute after second loop. echo # This 'echo' sometimes will not display. Chapter 3. Special Characters 16 Advanced Bash−Scripting Guide for i in 11 12 13 14 15 16 17 18 19 20 do echo −n "$i " done echo # Second loop. # This 'echo' sometimes will not display. # ====================================================== # The expected output from the script: # 1 2 3 4 5 6 7 8 9 10 # 11 12 13 14 15 16 17 18 19 20 # # # # Sometimes, though, you get: 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 bozo $ (The second 'echo' doesn't execute. Why?) # Occasionally also: # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 # (The first 'echo' doesn't execute. Why?) # Very rarely something like: # 11 12 13 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 # The foreground loop preempts the background one. exit 0 A command run in the background within a script may cause the script to hang, waiting for a keystroke. Fortunately, there is a remedy for this. && AND logical operator. In a test construct, the && operator causes a return of 0 (success) only if both the linked test conditions are true. − option, prefix. Option flag for a command or filter. Prefix for an operator. COMMAND −[Option1][Option2][...] ls −al sort −dfu $filename set −− $variable if [ $file1 −ot $file2 ] then echo "File $file1 is older than $file2." fi if [ "$a" −eq "$b" ] then echo "$a is equal to $b." fi if [ "$c" −eq 24 −a "$d" −eq 47 ] then echo "$c equals 24 and $d equals 47." Chapter 3. Special Characters 17 Advanced Bash−Scripting Guide fi − redirection from/to stdin or stdout. [dash] (cd /source/directory && tar cf − . ) | (cd /dest/directory && tar xpvf −) # Move entire file tree from one directory to another # [courtesy Alan Cox , with a minor change] # # # # # # # # # # # # # # # 1) cd /source/directory 2) && 3) tar cf − . 4) 5) 6) 7) 8) | ( ... ) cd /dest/directory && tar xpvf − Source directory, where the files to be moved are. "And−list": if the 'cd' operation successful, then execute the The 'c' option 'tar' archiving command creates a new archive, the 'f' (file) option, followed by '−' designates the target and do it in current directory tree ('.'). Piped to... a subshell Change to the destination directory. "And−list", as above Unarchive ('x'), preserve ownership and file permissions ('p' and send verbose messages to stdout ('v'), reading data from stdin ('f' followed by '−'). Note that 'x' is a command, and 'p', 'v', 'f' are options. Whew! # More elegant than, but equivalent to: # cd source−directory # tar cf − . | (cd ../target−directory; tar xzf −) # # cp −a /source/directory /dest also has same effect. bunzip2 linux−2.4.3.tar.bz2 | tar xvf − # −−uncompress tar file−− | −−then pass it to "tar"−− # If "tar" has not been patched to handle "bunzip2", # this needs to be done in two discrete steps, using a pipe. # The purpose of the exercise is to unarchive "bzipped" kernel source. Note that in this context the "−" is not itself a Bash operator, but rather an option recognized by certain Unix utilities that write to stdout, such as tar, cat, etc. bash$ echo "whatever" | cat − whatever Where a filename is expected, − redirects output to stdout (sometimes seen with tar cf), or accepts input from stdin, rather than from a file. This is a method of using a file−oriented utility as a filter in a pipe. bash$ file Usage: file [−bciknvzL] [−f namefile] [−m magicfiles] file... By itself on the command line, file fails with an error message. Add a "−" for a more useful result. This causes the shell to await user input. Chapter 3. Special Characters 18 Advanced Bash−Scripting Guide bash$ file − abc standard input: ASCII text bash$ file − #!/bin/bash standard input: Bourne−Again shell script text executable Now the command accepts input from stdin and analyzes it. The "−" can be used to pipe stdout to other commands. This permits such stunts as prepending lines to a file. Using diff to compare a file with a section of another: grep Linux file1 | diff file2 − Finally, a real−world example using − with tar. Example 3−4. Backup of all files changed in last day #!/bin/bash # Backs up all files in current directory modified within last 24 hours #+ in a "tarball" (tarred and gzipped file). BACKUPFILE=backup−$(date +%m−%d−%Y) # Embeds date in backup filename. # Thanks, Joshua Tschida, for the idea. archive=${1:−$BACKUPFILE} # If no backup−archive filename specified on command line, #+ it will default to "backup−MM−DD−YYYY.tar.gz." tar cvf − `find . −mtime −1 −type f −print` > $archive.tar gzip $archive.tar echo "Directory $PWD backed up in archive file \"$archive.tar.gz\"." # Stephane Chazelas points out that the above code will fail #+ if there are too many files found #+ or if any filenames contain blank characters. # He suggests the following alternatives: # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # find . −mtime −1 −type f −print0 | xargs −0 tar rvf "$archive.tar" # using the GNU version of "find". # find . −mtime −1 −type f −exec tar rvf "$archive.tar" '{}' \; # portable to other UNIX flavors, but much slower. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− exit 0 Chapter 3. Special Characters 19 Advanced Bash−Scripting Guide Filenames beginning with "−" may cause problems when coupled with the "−" redirection operator. A script should check for this and add an appropriate prefix to such filenames, for example ./−FILENAME, $PWD/−FILENAME, or $PATHNAME/−FILENAME. If the value of a variable begins with a −, this may likewise create problems. var="−n" echo $var # Has the effect of "echo −n", and outputs nothing. − previous working directory. [dash] cd − changes to the previous working directory. This uses the $OLDPWD environmental variable. Do not confuse the "−" used in this sense with the "−" redirection operator just discussed. The interpretation of the "−" depends on the context in which it appears. − Minus. Minus sign in an arithmetic operation. = Equals. Assignment operator a=28 echo $a # 28 In a different context, the "=" is a string comparison operator. + Plus. Addition arithmetic operator. In a different context, the + is a Regular Expression operator. + Option. Option flag for a command or filter. Certain commands and builtins use the + to enable certain options and the − to disable them. % modulo. Modulo (remainder of a division) arithmetic operation. In a different context, the % is a pattern matching operator. ~ home directory. [tilde] This corresponds to the $HOME internal variable. ~bozo is bozo's home directory, and ls ~bozo lists the contents of it. ~/ is the current user's home directory, and ls ~/ lists the contents of it. bash$ echo ~bozo /home/bozo bash$ echo ~ /home/bozo bash$ echo ~/ /home/bozo/ bash$ echo ~: /home/bozo: Chapter 3. Special Characters 20 Advanced Bash−Scripting Guide bash$ echo ~nonexistent−user ~nonexistent−user ~+ current working directory. This corresponds to the $PWD internal variable. ~− previous working directory. This corresponds to the $OLDPWD internal variable. ^ beginning−of−line. In a regular expression, a "^" addresses the beginning of a line of text. Control Characters change the behavior of the terminal or text display. A control character is a CONTROL + key combination. ◊ Ctl−B Backspace (nondestructive). ◊ Ctl−C ◊ Break. Terminate a foreground job. Ctl−D Log out from a shell (similar to exit). "EOF" (end of file). This also terminates input from stdin. ◊ Ctl−G "BEL" (beep). ◊ Ctl−H "Rubout" (destructive backspace). #!/bin/bash # Embedding Ctl−H in a string. a="^H^H" echo "abcdef" echo −n "abcdef$a " # Space at end ^ echo −n "abcdef$a" # No space at end echo; echo # Two Ctl−H's (backspaces). # abcdef # abcd f ^ Backspaces twice. # abcdef Doesn't backspace (why?). # Results may not be quite as expected. ◊ Ctl−I Horizontal tab. ◊ Ctl−J Newline (line feed). ◊ Ctl−K Chapter 3. Special Characters 21 Advanced Bash−Scripting Guide Vertical tab. ◊ Ctl−L Formfeed (clear the terminal screen). This has the same effect as the clear command. ◊ Ctl−M Carriage return. #!/bin/bash # Thank you, Lee Maschmeyer, for this example. read −n 1 −s −p $'Control−M leaves cursor at beginning of this line. Press Enter. \x # Of course, '0d' is the hex equivalent of Control echo >&2 # The '−s' makes anything typed silent, #+ so it is necessary to go to new line explicitly. read −n 1 −s −p $'Control−J leaves cursor on next line. \x0a' echo >&2 # Control−J is linefeed. read −n 1 −s −p $'And Control−K\x0bgoes straight down.' echo >&2 # Control−K is vertical tab. exit 0 ◊ Ctl−Q Resume (XON). This resumes stdin in a terminal. ◊ Ctl−S Suspend (XOFF). This freezes stdin in a terminal. (Use Ctl−Q to restore input.) ◊ Ctl−U Erase a line of input. ◊ Ctl−Z Pause a foreground job. Whitespace functions as a separator, separating commands or variables. Whitespace consists of either spaces, tabs, blank lines, or any combination thereof. In some contexts, such as variable assignment, whitespace is not permitted, and results in a syntax error. Blank lines have no effect on the action of a script, and are therefore useful for visually separating functional sections. $IFS, the special variable separating fields of input to certain commands, defaults to whitespace. Chapter 3. Special Characters 22 Chapter 4. Introduction to Variables and Parameters Variables are at the heart of every programming and scripting language. They appear in arithmetic operations and manipulation of quantities, string parsing, and are indispensable for working in the abstract with symbols − tokens that represent something else. A variable is nothing more than a location or set of locations in computer memory holding an item of data. 4.1. Variable Substitution The name of a variable is a placeholder for its value, the data it holds. Referencing its value is called variable substitution. $ Let us carefully distinguish between the name of a variable and its value. If variable1 is the name of a variable, then $variable1 is a reference to its value, the data item it contains. The only time a variable appears "naked", without the $ prefix, is when declared or assigned, when unset, when exported, or in the special case of a variable representing a signal (see Example 30−5). Assignment may be with an = (as in var1=27), in a read statement, and at the head of a loop (for var2 in 1 2 3). Enclosing a referenced value in double quotes (" ") does not interfere with variable substitution. This is called partial quoting, sometimes referred to as "weak quoting". Using single quotes (' ') causes the variable name to be used literally, and no substitution will take place. This is full quoting, sometimes referred to as "strong quoting". See Chapter 5 for a detailed discussion. Note that $variable is actually a simplified alternate form of ${variable}. In contexts where the $variable syntax causes an error, the longer form may work (see Section 9.3, below). Example 4−1. Variable assignment and substitution #!/bin/bash # Variables: assignment and substitution a=375 hello=$a #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # No space permitted on either side of = sign when initializing variables. # If "VARIABLE =value", #+ script tries to run "VARIABLE" command with one argument, "=value". # If "VARIABLE= value", #+ script tries to run "value" command with #+ the environmental variable "VARIABLE" set to "". #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− echo hello # Not a variable reference, just the string "hello". Chapter 4. Introduction to Variables and Parameters 23 Advanced Bash−Scripting Guide echo $hello echo ${hello} # Identical to above. echo "$hello" echo "${hello}" echo hello="A B C D" echo $hello #ABCD echo "$hello" # A B C D # As you see, echo $hello and echo "$hello" # Quoting a variable preserves whitespace. echo echo '$hello' # $hello # Variable referencing disabled by single quotes, #+ which causes the "$" to be interpreted literally. # Notice the effect of different types of quoting. give different results. hello= # Setting it to a null value. echo "\$hello (null value) = $hello" # Note that setting a variable to a null value is not the same as #+ unsetting it, although the end result is the same (see below). # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # It is permissible to set multiple variables on the same line, #+ if separated by white space. # Caution, this may reduce legibility, and may not be portable. var1=variable1 var2=variable2 var3=variable3 echo echo "var1=$var1 var2=$var2 var3=$var3" # May cause problems with older versions of "sh". # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− echo; echo numbers="one two three" other_numbers="1 2 3" # If whitespace within a variable, then quotes necessary. echo "numbers = $numbers" echo "other_numbers = $other_numbers" # other_numbers = 1 2 3 echo echo "uninitialized_variable = $uninitialized_variable" # Uninitialized variable has null value (no value at all). uninitialized_variable= # Declaring, but not initializing it #+ (same as setting it to a null value, as above). echo "uninitialized_variable = $uninitialized_variable" # It still has a null value. uninitialized_variable=23 # Set it. unset uninitialized_variable # Unset it. echo "uninitialized_variable = $uninitialized_variable" # It still has a null value. Chapter 4. Introduction to Variables and Parameters 24 Advanced Bash−Scripting Guide echo exit 0 An uninitialized variable has a "null" value − no assigned value at all (not zero!). Using a variable before assigning a value to it will usually cause problems. It is nevertheless possible to perform arithmetic operations on an uninitialized variable. echo "$uninitialized" let "uninitialized += 5" echo "$uninitialized" # # #+ # # (blank line) # Add 5 to it. #5 Conclusion: An uninitialized variable has no value, however it acts as if it were 0 in an arithmetic operation. This is undocumented (and probably non−portable) behavior. See also Example 11−20. 4.2. Variable Assignment = the assignment operator (no space before & after) Do not confuse this with = and −eq, which test, rather than assign! Note that = can be either an assignment or a test operator, depending on context. Example 4−2. Plain Variable Assignment #!/bin/bash # Naked variables echo # When is a variable "naked", i.e., lacking the '$' in front? # When it is being assigned, rather than referenced. # Assignment a=879 echo "The value of \"a\" is $a." # Assignment using 'let' let a=16+5 echo "The value of \"a\" is now $a." echo # In a 'for' loop (really, a type of disguised assignment) echo −n "Values of \"a\" in the loop are: " for a in 7 8 9 11 Chapter 4. Introduction to Variables and Parameters 25 Advanced Bash−Scripting Guide do echo −n "$a " done echo echo # In echo read echo echo exit 0 a 'read' statement (also a type of assignment) −n "Enter \"a\" " a "The value of \"a\" is now $a." Example 4−3. Variable Assignment, plain and fancy #!/bin/bash a=23 echo $a b=$a echo $b # Simple case # Now, getting a little bit fancier (command substitution). a=`echo Hello!` # Assigns result of 'echo' command to 'a' echo $a # Note that using an exclamation mark (!) in command substitution #+ will not work from the command line, #+ since this triggers the Bash "history mechanism." # Within a script, however, the history functions are disabled. a=`ls −l` echo $a echo echo "$a" # Assigns result of 'ls −l' command to 'a' # Unquoted, however, removes tabs and newlines. # The quoted variable preserves whitespace. # (See the chapter on "Quoting.") exit 0 Variable assignment using the $(...) mechanism (a newer method than backquotes) # From /etc/rc.d/rc.local R=$(cat /etc/redhat−release) arch=$(uname −m) 4.3. Bash Variables Are Untyped Unlike many other programming languages, Bash does not segregate its variables by "type". Essentially, Bash variables are character strings, but, depending on context, Bash permits integer operations and comparisons on variables. The determining factor is whether the value of a variable contains only digits. Chapter 4. Introduction to Variables and Parameters 26 Advanced Bash−Scripting Guide Example 4−4. Integer or string? #!/bin/bash # int−or−string.sh: Integer or string? a=2334 let "a += 1" echo "a = $a " echo # Integer. # a = 2335 # Integer, still. b=${a/23/BB} echo "b = $b" declare −i b echo "b = $b" let "b += 1" echo "b = $b" echo c=BB34 echo "c = $c" d=${c/BB/23} echo "d = $d" let "d += 1" echo "d = $d" echo # # # # # Substitute "BB" for "23". This transforms $b into a string. b = BB35 Declaring it an integer doesn't help. b = BB35 # BB35 + 1 = #b=1 # # # # # # c = BB34 Substitute "23" for "BB". This makes $d an integer. d = 2334 2334 + 1 = d = 2335 # What about null variables? e="" echo "e = $e" #e= let "e += 1" # Arithmetic operations allowed on a null variable? echo "e = $e" #e=1 echo # Null variable transformed into an integer. # What about undeclared variables? echo "f = $f" #f= let "f += 1" # Arithmetic operations allowed? echo "f = $f" #f=1 echo # Undeclared variable transformed into an integer. # Variables in Bash are essentially untyped. exit 0 Untyped variables are both a blessing and a curse. They permit more flexibility in scripting (enough rope to hang yourself!) and make it easier to grind out lines of code. However, they permit errors to creep in and encourage sloppy programming habits. The burden is on the programmer to keep track of what type the script variables are. Bash will not do it for you. Chapter 4. Introduction to Variables and Parameters 27 Advanced Bash−Scripting Guide 4.4. Special Variable Types local variables variables visible only within a code block or function (see also local variables in functions) environmental variables variables that affect the behavior of the shell and user interface In a more general context, each process has an "environment", that is, a group of variables that hold information that the process may reference. In this sense, the shell behaves like any other process. Every time a shell starts, it creates shell variables that correspond to its own environmental variables. Updating or adding new environmental variables causes the shell to update its environment, and all the shell's child processes (the commands it executes) inherit this environment. The space allotted to the environment is limited. Creating too many environmental variables or ones that use up excessive space may cause problems. bash$ eval "`seq 10000 | sed −e 's/.*/export var&=ZZZZZZZZZZZZZZ/'`" bash$ du bash: /usr/bin/du: Argument list too long (Thank you, S. C. for the clarification, and for providing the above example.) If a script sets environmental variables, they need to be "exported", that is, reported to the environment local to the script. This is the function of the export command. A script can export variables only to child processes, that is, only to commands or processes which that particular script initiates. A script invoked from the command line cannot export variables back to the command line environment. Child processes cannot export variables back to the parent processes that spawned them. −−− positional parameters arguments passed to the script from the command line − $0, $1, $2, $3... $0 is the name of the script itself, $1 is the first argument, $2 the second, $3 the third, and so forth. [13] After $9, the arguments must be enclosed in brackets, for example, ${10}, ${11}, ${12}. The special variables $* and $@ denote all the positional parameters. Example 4−5. Positional Parameters #!/bin/bash # Call this script with at least 10 parameters, for example # ./scriptname 1 2 3 4 5 6 7 8 9 10 Chapter 4. Introduction to Variables and Parameters 28 Advanced Bash−Scripting Guide MINPARAMS=10 echo echo "The name of this script is \"$0\"." # Adds ./ for current directory echo "The name of this script is \"`basename $0`\"." # Strips out path name info (see 'basename') echo if [ −n "$1" ] then echo "Parameter #1 is $1" fi if [ −n "$2" ] then echo "Parameter #2 is $2" fi if [ −n "$3" ] then echo "Parameter #3 is $3" fi # ... # Tested variable is quoted. # Need quotes to escape # if [ −n "${10}" ] # Parameters > $9 must be enclosed in {brackets}. then echo "Parameter #10 is ${10}" fi echo "−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−" echo "All the command−line parameters are: "$*"" if [ $# −lt "$MINPARAMS" ] then echo echo "Give me at least $MINPARAMS command−line arguments!" fi echo exit 0 The bracket notation for positional parameters leads to a fairly simple way of referencing the last argument passed to a script on the command line. This also requires indirect referencing. args=$# lastarg=${!args} # Number of args passed. # Note that lastarg=${!$#} doesn't work. Some scripts can perform different operations, depending on which name they are invoked with. For this to work, the script needs to check $0, the name it was invoked by. There must also exist symbolic links to all the alternate names of the script. See Example 12−2. If a script expects a command line parameter but is invoked without one, this may cause a null variable assignment, generally an undesirable result. One way to prevent Chapter 4. Introduction to Variables and Parameters 29 Advanced Bash−Scripting Guide this is to append an extra character to both sides of the assignment statement using the expected positional parameter. variable1_=$1_ # This will prevent an error, even if positional parameter is absent. critical_argument01=$variable1_ # The extra character can be stripped off later, if desired, like so. variable1=${variable1_/_/} # Side effects only if $variable1_ begins with "_". # This uses one of the parameter substitution templates discussed in Chapter 9. # Leaving out the replacement pattern results in a deletion. # A more straightforward way of dealing with this is #+ to simply test whether expected positional parameters have been passed. if [ −z $1 ] then exit $POS_PARAMS_MISSING fi −−− Example 4−6. wh, whois domain name lookup #!/bin/bash # Does a 'whois domain−name' lookup on any of 3 alternate servers: # ripe.net, cw.net, radb.net # Place this script, named 'wh' in /usr/local/bin # # # # Requires symbolic links: ln −s /usr/local/bin/wh /usr/local/bin/wh−ripe ln −s /usr/local/bin/wh /usr/local/bin/wh−cw ln −s /usr/local/bin/wh /usr/local/bin/wh−radb if [ −z "$1" ] then echo "Usage: `basename $0` [domain−name]" exit 65 fi case `basename $0` in # Checks script name and calls proper server "wh" ) whois $1@whois.ripe.net;; "wh−ripe") whois $1@whois.ripe.net;; "wh−radb") whois $1@whois.radb.net;; "wh−cw" ) whois $1@whois.cw.net;; * ) echo "Usage: `basename $0` [domain−name]";; esac exit 0 −−− Chapter 4. Introduction to Variables and Parameters 30 Advanced Bash−Scripting Guide The shift command reassigns the positional parameters, in effect shifting them to the left one notch. $1 <−−− $2, $2 <−−− $3, $3 <−−− $4, etc. The old $1 disappears, but $0 (the script name) does not change. If you use a large number of positional parameters to a script, shift lets you access those past 10, although {bracket} notation also permits this. Example 4−7. Using shift #!/bin/bash # Using 'shift' to step through all the positional parameters. # Name this script something like shft, #+ and invoke it with some parameters, for example # ./shft a b c def 23 skidoo until [ −z "$1" ] do echo −n "$1 " shift done echo exit 0 # Until all parameters used up... # Extra line feed. The shift command also works on parameters passed to a function. See Example 34−11. Chapter 4. Introduction to Variables and Parameters 31 Chapter 5. Quoting Quoting means just that, bracketing a string in quotes. This has the effect of protecting special characters in the string from reinterpretation or expansion by the shell or shell script. (A character is "special" if it has an interpretation other than its literal meaning, such as the wild card character, *.) bash$ ls −l [Vv]* −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo 324 Apr 2 15:05 VIEWDATA.BAT 507 May 4 14:25 vartrace.sh 539 Apr 14 17:11 viewdata.sh bash$ ls −l '[Vv]*' ls: [Vv]*: No such file or directory Certain programs and utilities can still reinterpret or expand special characters in a quoted string. This is an important use of quoting, protecting a command−line parameter from the shell, but still letting the calling program expand it. bash$ grep '[Ff]irst' *.txt file1.txt:This is the first line of file1.txt. file2.txt:This is the First line of file2.txt. Note that the unquoted grep [Ff]irst *.txt works under the Bash shell, but not under tcsh. When referencing a variable, it is generally advisable to enclose it in double quotes (" "). This preserves all special characters within the variable name, except $, ` (backquote), and \ (escape). [14] Keeping $ as a special character within double quotes permits referencing a quoted variable ("$variable"), that is, replacing the variable with its value (see Example 4−1, above). Use double quotes to prevent word splitting. [15] An argument enclosed in double quotes presents itself as a single word, even if it contains whitespace separators. variable1="a variable containing five words" COMMAND This is $variable1 # Executes COMMAND with 7 arguments: # "This" "is" "a" "variable" "containing" "five" "words" COMMAND "This is $variable1" # Executes COMMAND with 1 argument: # "This is a variable containing five words" variable2="" # Empty. # Executes COMMAND with no arguments. # Executes COMMAND with 3 empty arguments. # Executes COMMAND with 1 argument (2 spaces). COMMAND $variable2 $variable2 $variable2 COMMAND "$variable2" "$variable2" "$variable2" COMMAND "$variable2 $variable2 $variable2" # Thanks, S.C. Enclosing the arguments to an echo statement in double quotes is necessary only when word splitting is an issue. Chapter 5. Quoting 32 Advanced Bash−Scripting Guide Example 5−1. Echoing Weird Variables #!/bin/bash # weirdvars.sh: Echoing weird variables. var="'(]\\{}\$\"" echo $var # '(]\{}$" echo "$var" # '(]\{}$" echo IFS='\' echo $var echo "$var" Doesn't make a difference. # '(] {}$" # '(]\{}$" \ converted to space. # Examples above supplied by S.C. exit 0 Single quotes (' ') operate similarly to double quotes, but do not permit referencing variables, since the special meaning of $ is turned off. Within single quotes, every special character except ' gets interpreted literally. Consider single quotes ("full quoting") to be a stricter method of quoting than double quotes ("partial quoting"). Since even the escape character (\) gets a literal interpretation within single quotes, trying to enclose a single quote within single quotes will not yield the expected result. echo "Why can't I write 's between single quotes" echo # The roundabout method. echo 'Why can'\''t I write '"'"'s between single quotes' # |−−−−−−−| |−−−−−−−−−−| |−−−−−−−−−−−−−−−−−−−−−−−| # Three single−quoted strings, with escaped and quoted single quotes between. # This example courtesy of Stephane Chazelas. Escaping is a method of quoting single characters. The escape (\) preceding a character tells the shell to interpret that character literally. With certain commands and utilities, such as echo and sed, escaping a character may have the opposite effect − it can toggle on a special meaning for that character. Special meanings of certain escaped characters used with echo and sed \n means newline \r means return \t means tab \v means vertical tab Chapter 5. Quoting 33 Advanced Bash−Scripting Guide \b means backspace \a means "alert" (beep or flash) \0xx translates to the octal ASCII equivalent of 0xx Example 5−2. Escaped Characters #!/bin/bash # escaped.sh: escaped characters echo; echo echo "\v\v\v\v" # Prints \v\v\v\v literally. # Use the −e option with 'echo' to print escaped characters. echo "=============" echo "VERTICAL TABS" echo −e "\v\v\v\v" # Prints 4 vertical tabs. echo "==============" echo "QUOTATION MARK" echo −e "\042" # Prints " (quote, octal ASCII character 42). echo "==============" # The $'\X' construct makes the −e option unnecessary. echo; echo "NEWLINE AND BEEP" echo $'\n' # Newline. echo $'\a' # Alert (beep). echo "===============" echo "QUOTATION MARKS" # Version 2 and later of Bash permits using the $'\nnn' construct. # Note that in this case, '\nnn' is an octal value. echo $'\t \042 \t' # Quote (") framed by tabs. # It also works with hexadecimal values, in an $'\xhhh' construct. echo $'\t \x22 \t' # Quote (") framed by tabs. # Thank you, Greg Keraunen, for pointing this out. # Earlier Bash versions allowed '\x022'. echo "===============" echo # Assigning ASCII characters to a variable. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− quote=$'\042' # " assigned to a variable. echo "$quote This is a quoted string, $quote and this lies outside the quotes." echo # Concatenating ASCII chars in a variable. triple_underline=$'\137\137\137' # 137 is octal ASCII code for '_'. echo "$triple_underline UNDERLINE $triple_underline" echo ABC=$'\101\102\103\010' echo $ABC # 101, 102, 103 are octal A, B, C. Chapter 5. Quoting 34 Advanced Bash−Scripting Guide echo; echo escape=$'\033' # 033 is octal for escape. echo "\"escape\" echoes as $escape" # no visible output. echo; echo exit 0 See Example 35−1 for another example of the $' ' string expansion construct. \" gives the quote its literal meaning echo "Hello" echo "\"Hello\", he said." # Hello # "Hello", he said. \$ gives the dollar sign its literal meaning (variable name following \$ will not be referenced) echo "\$variable01" # results in $variable01 \\ gives the backslash its literal meaning echo "\\" # Results in \ # Whereas . . . echo "\" # Invokes secondary prompt from the command line. # In a script, gives an error message. The behavior of \ depends on whether it is itself escaped, quoted, or appearing within command substitution or a here document. # # # # # # # # # # # # # # # # Simple escaping and quoting z \z \z \\z \z \z Command substitution z z \z \z \z \\z \z \z echo echo echo echo echo echo \z \\z '\z' '\\z' "\z" "\\z" echo echo echo echo echo echo echo echo `echo `echo `echo `echo `echo `echo `echo `echo \z` \\z` \\\z` \\\\z` \\\\\\z` \\\\\\\z` "\z"` "\\z"` # Here document cat < /dev/null # Suppress output. then echo "Files a and b are identical." else echo "Files a and b differ." fi if grep −q Bash file then echo "File contains at least one occurrence of Bash." fi word=Linux letter_sequence=inu if echo "$word" | grep −q "$letter_sequence" # The "−q" option to grep suppresses output. then echo "$letter_sequence found in $word" else echo "$letter_sequence not found in $word" fi if COMMAND_WHOSE_EXIT_STATUS_IS_0_UNLESS_ERROR_OCCURRED then echo "Command succeeded." else echo "Command failed." fi • An if/then construct can contain nested comparisons and tests. Chapter 7. Tests 40 Advanced Bash−Scripting Guide if echo "Next *if* is part of the comparison for the first *if*." if [[ $comparison = "integer" ]] then (( a < b )) else [[ $a < $b ]] fi then echo '$a is less than $b' fi This detailed "if−test" explanation courtesy of Stephane Chazelas. Example 7−1. What is truth? #!/bin/bash echo echo "Testing \"0\"" if [ 0 ] # zero then echo "0 is true." else echo "0 is false." fi # 0 is true. echo echo "Testing \"1\"" if [ 1 ] # one then echo "1 is true." else echo "1 is false." fi # 1 is true. echo echo "Testing if [ −1 ] then echo "−1 is else echo "−1 is fi echo echo "Testing \"NULL\"" if [ ] # NULL (empty condition) then echo "NULL is true." else echo "NULL is false." fi # NULL is false. echo echo "Testing \"xyz\"" \"−1\"" # minus one true." false." # −1 is true. Chapter 7. Tests 41 Advanced Bash−Scripting Guide if [ xyz ] # string then echo "Random string is true." else echo "Random string is false." fi # Random string is true. echo echo "Testing \"\$xyz\"" if [ $xyz ] # Tests if $xyz is null, but... # it's only an uninitialized variable. then echo "Uninitialized variable is true." else echo "Uninitialized variable is false." fi # Uninitialized variable is false. echo echo "Testing \"−n \$xyz\"" if [ −n "$xyz" ] # More pedantically correct. then echo "Uninitialized variable is true." else echo "Uninitialized variable is false." fi # Uninitialized variable is false. echo xyz= # Initialized, but set to null value. echo "Testing \"−n \$xyz\"" if [ −n "$xyz" ] then echo "Null variable is true." else echo "Null variable is false." fi # Null variable is false. echo # When is "false" true? echo "Testing \"false\"" if [ "false" ] # It seems that "false" is just a string. then echo "\"false\" is true." #+ and it tests true. else echo "\"false\" is false." fi # "false" is true. echo echo "Testing \"\$false\"" # Again, uninitialized variable. if [ "$false" ] then echo "\"\$false\" is true." else Chapter 7. Tests 42 Advanced Bash−Scripting Guide fi echo "\"\$false\" is false." # "$false" is false. # Now, we get the expected result. echo exit 0 Exercise. Explain the behavior of Example 7−1, above. if [ condition−true ] then command 1 command 2 ... else # Optional (may be left out if not needed). # Adds default code block executing if original condition tests false. command 3 command 4 ... fi When if and then are on same line in a condition test, a semicolon must terminate the if statement. Both if and then are keywords. Keywords (or commands) begin statements, and before a new statement on the same line begins, the old one must terminate. if [ −x "$filename" ]; then Else if and elif elif elif is a contraction for else if. The effect is to nest an inner if/then construct within an outer one. if [ condition1 ] then command1 command2 command3 elif [ condition2 ] # Same as else if then command4 command5 else default−command fi The if test condition−true construct is the exact equivalent of if [ condition−true ]. As it happens, the left bracket, [ , is a token which invokes the test command. The closing right bracket, ] , in an if/test should not therefore be strictly necessary, however newer versions of Bash require it. The test command is a Bash builtin which tests file types and compares strings. Therefore, in a Bash script, test does not call the external /usr/bin/test binary, which is part of the sh−utils package. Likewise, [ does not call /usr/bin/[, which is linked to /usr/bin/test. Chapter 7. Tests 43 Advanced Bash−Scripting Guide bash$ type test test is a shell builtin bash$ type '[' [ is a shell builtin bash$ type '[[' [[ is a shell keyword bash$ type ']]' ]] is a shell keyword bash$ type ']' bash: type: ]: not found Example 7−2. Equivalence of test, /usr/bin/test, [ ], and /usr/bin/[ #!/bin/bash echo if test −z "$1" then echo "No command−line arguments." else echo "First command−line argument is $1." fi echo if /usr/bin/test −z "$1" # Same result as "test" builtin". then echo "No command−line arguments." else echo "First command−line argument is $1." fi echo if [ −z "$1" ] # Functionally identical to above code blocks. # if [ −z "$1" should work, but... #+ Bash responds to a missing close−bracket with an error message. then echo "No command−line arguments." else echo "First command−line argument is $1." fi echo if /usr/bin/[ −z "$1" # Again, functionally identical to above. # if /usr/bin/[ −z "$1" ] # Works, but gives an error message. then echo "No command−line arguments." else echo "First command−line argument is $1." fi echo exit 0 Chapter 7. Tests 44 Advanced Bash−Scripting Guide The [[ ]] construct is the more versatile Bash version of [ ]. This is the extended test command, adopted from ksh88. No filename expansion or word splitting takes place between [[ and ]], but there is parameter expansion and command substitution. file=/etc/passwd if [[ −e $file ]] then echo "Password file exists." fi Using the [[ ... ]] test construct, rather than [ ... ] can prevent many logic errors in scripts. For example, the &&, ||, <, and > operators work within a [[ ]] test, despite giving an error within a [ ] construct. Following an if, neither the test command nor the test brackets ( [ ] or [[ ]] ) are strictly necessary. dir=/home/bozo if cd "$dir" 2>/dev/null; then echo "Now in $dir." else echo "Can't change to $dir." fi # "2>/dev/null" hides error message. The "if COMMAND" construct returns the exit status of COMMAND. Similarly, a condition within test brackets may stand alone without an if, when used in combination with a list construct. var1=20 var2=22 [ "$var1" −ne "$var2" ] && echo "$var1 is not equal to $var2" home=/home/bozo [ −d "$home" ] || echo "$home directory does not exist." The (( )) construct expands and evaluates an arithmetic expression. If the expression evaluates as zero, it returns an exit status of 1, or "false". A non−zero expression returns an exit status of 0, or "true". This is in marked contrast to using the test and [ ] constructs previously discussed. Example 7−3. Arithmetic Tests using (( )) #!/bin/bash # Arithmetic tests. # The (( ... )) construct evaluates and tests numerical expressions. # Exit status opposite from [ ... ] construct! (( 0 )) echo "Exit status of \"(( 0 ))\" is $?." #1 Chapter 7. Tests 45 Advanced Bash−Scripting Guide (( 1 )) echo "Exit status of \"(( 1 ))\" is $?." (( 5 > 4 )) echo "Exit status of \"(( 5 > 4 ))\" is $?." (( 5 > 9 )) echo "Exit status of \"(( 5 > 9 ))\" is $?." (( 5 − 5 )) echo "Exit status of \"(( 5 − 5 ))\" is $?." (( 5 / 4 )) echo "Exit status of \"(( 5 / 4 ))\" is $?." (( 1 / 2 )) echo "Exit status of \"(( 1 / 2 ))\" is $?." #0 # true #0 # false #1 #0 #1 # Division o.k. #0 # Division result < 1. # Rounded off to 0. #1 # Illegal division by 0. #1 (( 1 / 0 )) 2>/dev/null echo "Exit status of \"(( 1 / 0 ))\" is $?." # What effect does the "2>/dev/null" have? # What would happen if it were removed? # Try removing it, then rerunning the script. exit 0 7.2. File test operators Returns true if... −e file exists −f file is a regular file (not a directory or device file) −s file is not zero size −d file is a directory −b file is a block device (floppy, cdrom, etc.) −c file is a character device (keyboard, modem, sound card, etc.) −p file is a pipe −h file is a symbolic link −L file is a symbolic link −S file is a socket −t file (descriptor) is associated with a terminal device Chapter 7. Tests 46 Advanced Bash−Scripting Guide This test option may be used to check whether the stdin ([ −t 0 ]) or stdout ([ −t 1 ]) in a given script is a terminal. −r file has read permission (for the user running the test) −w file has write permission (for the user running the test) −x file has execute permission (for the user running the test) −g set−group−id (sgid) flag set on file or directory If a directory has the sgid flag set, then a file created within that directory belongs to the group that owns the directory, not necessarily to the group of the user who created the file. This may be useful for a directory shared by a workgroup. −u set−user−id (suid) flag set on file A binary owned by root with set−user−id flag set runs with root privileges, even when an ordinary user invokes it. [16] This is useful for executables (such as pppd and cdrecord) that need to access system hardware. Lacking the suid flag, these binaries could not be invoked by a non−root user. −rwsr−xr−t 1 root 178236 Oct 2 2000 /usr/sbin/pppd A file with the suid flag set shows an s in its permissions. −k sticky bit set Commonly known as the "sticky bit", the save−text−mode flag is a special type of file permission. If a file has this flag set, that file will be kept in cache memory, for quicker access. [17] If set on a directory, it restricts write permission. Setting the sticky bit adds a t to the permissions on the file or directory listing. drwxrwxrwt 7 root 1024 May 19 21:26 tmp/ If a user does not own a directory that has the sticky bit set, but has write permission in that directory, he can only delete files in it that he owns. This keeps users from inadvertently overwriting or deleting each other's files in a publicly accessible directory, such as /tmp. −O you are owner of file −G group−id of file same as yours −N file modified since it was last read f1 −nt f2 file f1 is newer than f2 f1 −ot f2 file f1 is older than f2 f1 −ef f2 Chapter 7. Tests 47 Advanced Bash−Scripting Guide files f1 and f2 are hard links to the same file ! "not" −− reverses the sense of the tests above (returns true if condition absent). Example 7−4. Testing for broken links #!/bin/bash # broken−link.sh # Written by Lee bigelow # Used with permission. #A pure shell script to find dead symlinks and output them quoted #so they can be fed to xargs and dealt with :) #eg. broken−link.sh /somedir /someotherdir|xargs rm # #This, however, is a better method: # #find "somedir" −type l −print0|\ #xargs −r0 file|\ #grep "broken symbolic"| #sed −e 's/^\|: *broken symbolic.*$/"/g' # #but that wouldn't be pure bash, now would it. #Caution: beware the /proc file system and any circular links! ############################################################## #If no args are passed to the script set directorys to search #to current directory. Otherwise set the directorys to search #to the agrs passed. #################### [ $# −eq 0 ] && directorys=`pwd` || directorys=$@ #Setup the function linkchk to check the directory it is passed #for files that are links and don't exist, then print them quoted. #If one of the elements in the directory is a subdirectory then #send that send that subdirectory to the linkcheck function. ########## linkchk () { for element in $1/*; do [ −h "$element" −a ! −e "$element" ] && echo \"$element\" [ −d "$element" ] && linkchk $element # Of course, '−h' tests for symbolic link, '−d' for directory. done } #Send each arg that was passed to the script to the linkchk function #if it is a valid directoy. If not, then print the error message #and usage info. ################ for directory in $directorys; do if [ −d $directory ] then linkchk $directory else echo "$directory is not a directory" echo "Usage: $0 dir1 dir2 ..." fi done Chapter 7. Tests 48 Advanced Bash−Scripting Guide exit 0 Example 29−1, Example 10−7, Example 10−3, Example 29−3, and Example A−2 also illustrate uses of the file test operators. 7.3. Comparison operators (binary) integer comparison −eq is equal to if [ "$a" −eq "$b" ] −ne is not equal to if [ "$a" −ne "$b" ] −gt is greater than if [ "$a" −gt "$b" ] −ge is greater than or equal to if [ "$a" −ge "$b" ] −lt is less than if [ "$a" −lt "$b" ] −le is less than or equal to if [ "$a" −le "$b" ] < is less than (within double parentheses) (("$a" < "$b")) <= is less than or equal to (within double parentheses) (("$a" <= "$b")) > is greater than (within double parentheses) (("$a" > "$b")) >= is greater than or equal to (within double parentheses) (("$a" >= "$b")) Chapter 7. Tests 49 Advanced Bash−Scripting Guide string comparison = is equal to if [ "$a" = "$b" ] == is equal to if [ "$a" == "$b" ] This is a synonym for =. [[ $a == z* ]] [[ $a == "z*" ]] [ $a == z* ] [ "$a" == "z*" ] # Thanks, S.C. # true if $a starts with an "z" (pattern matching) # true if $a is equal to z* # file globbing and word splitting take place # true if $a is equal to z* != is not equal to if [ "$a" != "$b" ] This operator uses pattern matching within a [[ ... ]] construct. < is less than, in ASCII alphabetical order if [[ "$a" < "$b" ]] if [ "$a" \< "$b" ] Note that the "<" needs to be escaped within a [ ] construct. > is greater than, in ASCII alphabetical order if [[ "$a" > "$b" ]] if [ "$a" \> "$b" ] Note that the ">" needs to be escaped within a [ ] construct. See Example 26−11 for an application of this comparison operator. −z string is "null", that is, has zero length −n string is not "null". The −n test absolutely requires that the string be quoted within the test brackets. Using an unquoted string with ! −z, or even just the unquoted string alone within Chapter 7. Tests 50 Advanced Bash−Scripting Guide test brackets (see Example 7−6) normally works, however, this is an unsafe practice. Always quote a tested string. [18] Example 7−5. Arithmetic and string comparisons #!/bin/bash a=4 b=5 # Here "a" and "b" can be treated either as integers or strings. # There is some blurring between the arithmetic and string comparisons, #+ since Bash variables are not strongly typed. # Bash permits integer operations and comparisons on variables #+ whose value consists of all−integer characters. # Caution advised. echo if [ "$a" −ne "$b" ] then echo "$a is not equal to $b" echo "(arithmetic comparison)" fi echo if [ "$a" != "$b" ] then echo "$a is not equal to $b." echo "(string comparison)" # "4" != "5" # ASCII 52 != ASCII 53 fi # In this particular instance, both "−ne" and "!=" work. echo exit 0 Example 7−6. Testing whether a string is null #!/bin/bash # str−test.sh: Testing null strings and unquoted strings, #+ but not strings and sealing wax, not to mention cabbages and kings . . . # Using if [ ... ] # If a string has not been initialized, it has no defined value. # This state is called "null" (not the same as zero). if [ −n $string1 ] # $string1 has not been declared or initialized. then echo "String \"string1\" is not null." Chapter 7. Tests 51 Advanced Bash−Scripting Guide else echo "String \"string1\" is null." fi # Wrong result. # Shows $string1 as not null, although it was not initialized. echo # Lets try it again. if [ −n "$string1" ] # This time, $string1 is quoted. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." fi # Quote strings within test brackets! echo if [ $string1 ] # This time, $string1 stands naked. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." fi # This works fine. # The [ ] test operator alone detects whether the string is null. # However it is good practice to quote it ("$string1"). # # As Stephane Chazelas points out, # if [ $string1 ] has one argument, "]" # if [ "$string1" ] has two arguments, the empty "$string1" and "]" echo string1=initialized if [ $string1 ] # Again, $string1 stands naked. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." fi # Again, gives correct result. # Still, it is better to quote it ("$string1"), because . . . string1="a = b" if [ $string1 ] # Again, $string1 stands naked. then echo "String \"string1\" is not null." else echo "String \"string1\" is null." Chapter 7. Tests 52 Advanced Bash−Scripting Guide fi # Not quoting "$string1" now gives wrong result! exit 0 # Thank you, also, Florian Wisser, for the "heads−up". Example 7−7. zmost #!/bin/bash #View gzipped files with 'most' NOARGS=65 NOTFOUND=66 NOTGZIP=67 if [ $# −eq 0 ] # same effect as: if [ −z "$1" ] # $1 can exist, but be empty: zmost "" arg2 arg3 then echo "Usage: `basename $0` filename" >&2 # Error message to stderr. exit $NOARGS # Returns 65 as exit status of script (error code). fi filename=$1 if [ ! −f "$filename" ] # Quoting $filename allows for possible spaces. then echo "File $filename not found!" >&2 # Error message to stderr. exit $NOTFOUND fi if [ ${filename##*.} != "gz" ] # Using bracket in variable substitution. then echo "File $1 is not a gzipped file!" exit $NOTGZIP fi zcat $1 | most # Uses the file viewer 'most' (similar to 'less'). # Later versions of 'most' have file decompression capabilities. # May substitute 'more' or 'less', if desired. exit $? # Script returns exit status of pipe. # Actually "exit $?" unnecessary, as the script will, in any case, # return the exit status of the last command executed. compound comparison −a logical and exp1 −a exp2 returns true if both exp1 and exp2 are true. Chapter 7. Tests 53 Advanced Bash−Scripting Guide −o logical or exp1 −o exp2 returns true if either exp1 or exp2 are true. These are similar to the Bash comparison operators && and ||, used within double brackets. [[ condition1 && condition2 ]] The −o and −a operators work with the test command or occur within single test brackets. if [ "$exp1" −a "$exp2" ] Refer to Example 8−3 and Example 26−16 to see compound comparison operators in action. 7.4. Nested if/then Condition Tests Condition tests using the if/then construct may be nested. The net result is identical to using the && compound comparison operator above. if [ condition1 ] then if [ condition2 ] then do−something # But only if both "condition1" and "condition2" valid. fi fi See Example 35−4 for an example of nested if/then condition tests. 7.5. Testing Your Knowledge of Tests The systemwide xinitrc file can be used to launch the X server. This file contains quite a number of if/then tests, as the following excerpt shows. if [ −f $HOME/.Xclients ]; then exec $HOME/.Xclients elif [ −f /etc/X11/xinit/Xclients ]; then exec /etc/X11/xinit/Xclients else # failsafe settings. Although we should never get here # (we provide fallbacks in Xclients as well) it can't hurt. xclock −geometry 100x100−5+5 & xterm −geometry 80x50−50+150 & if [ −f /usr/bin/netscape −a −f /usr/share/doc/HTML/index.html ]; then netscape /usr/share/doc/HTML/index.html & fi fi Explain the "test" constructs in the above excerpt, then examine the entire file, /etc/X11/xinit/xinitrc, and analyze the if/then test constructs there. You may need to refer ahead to the discussions of grep, sed, and regular expressions. Chapter 7. Tests 54 Chapter 8. Operations and Related Topics 8.1. Operators assignment variable assignment Initializing or changing the value of a variable = All−purpose assignment operator, which works for both arithmetic and string assignments. var=27 category=minerals # No spaces allowed after the "=". Do not confuse the "=" assignment operator with the = test operator. # = as a test operator if [ "$string1" = "$string2" ] # if [ "X$string1" = "X$string2" ] is safer, # to prevent an error message should one of the variables be empty. # (The prepended "X" characters cancel out.) then command fi arithmetic operators + plus − minus * multiplication / division ** exponentiation # Bash, version 2.02, introduced the "**" exponentiation operator. let "z=5**3" echo "z = $z" # z = 125 % modulo, or mod (returns the remainder of an integer division operation) bash$ echo `expr 5 % 3` 2 This operator finds use in, among other things, generating numbers within a specific range (see Example 9−23 and Example 9−26) and formatting program output (see Example 26−15 and Example Chapter 8. Operations and Related Topics 55 Advanced Bash−Scripting Guide A−7). It can even be used to generate prime numbers, (see Example A−17). Modulo turns up surprisingly often in various numerical recipes. Example 8−1. Greatest common divisor #!/bin/bash # gcd.sh: greatest common divisor # Uses Euclid's algorithm # The "greatest common divisor" (gcd) of two integers #+ is the largest integer that will divide both, leaving no remainder. # # #+ #+ #+ #+ # # # Euclid's algorithm uses successive division. In each pass, dividend <−−− divisor divisor <−−− remainder until remainder = 0. The gcd = dividend, on the final pass. For an excellent discussion of Euclid's algorithm, see Jim Loy's site, http://www.jimloy.com/number/euclids.htm. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Argument check ARGS=2 E_BADARGS=65 if [ $# −ne "$ARGS" ] then echo "Usage: `basename $0` first−number second−number" exit $E_BADARGS fi # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− gcd () { # # #+ # Arbitrary assignment. It does not matter which of the two is larger. Why? dividend=$1 divisor=$2 remainder=1 # If uninitialized variable used in loop, #+ it results in an error message #+ on first pass through loop. until [ "$remainder" −eq 0 ] do let "remainder = $dividend % $divisor" dividend=$divisor # Now repeat with 2 smallest numbers. divisor=$remainder done # Euclid's algorithm } # Last $dividend is the gcd. gcd $1 $2 Chapter 8. Operations and Related Topics 56 Advanced Bash−Scripting Guide echo; echo "GCD of $1 and $2 = $dividend"; echo # Exercise : # −−−−−−−− # Check command−line arguments to make sure they are integers, #+ and exit the script with an appropriate error message if not. exit 0 += "plus−equal" (increment variable by a constant) let "var += 5" results in var being incremented by 5. −= "minus−equal" (decrement variable by a constant) *= "times−equal" (multiply variable by a constant) let "var *= 4" results in var being multiplied by 4. /= "slash−equal" (divide variable by a constant) %= "mod−equal" (remainder of dividing variable by a constant) Arithmetic operators often occur in an expr or let expression. Example 8−2. Using Arithmetic Operations #!/bin/bash # Counting to 7 in 6 different ways. n=1; echo −n "$n " let "n = $n + 1" echo −n "$n " # let "n = n + 1" also works. : $((n = $n + 1)) # ":" necessary because otherwise Bash attempts #+ to interpret "$((n = $n + 1))" as a command. echo −n "$n " (( n = n + 1 )) # A simpler alternative to the method above. # Thanks, David Lombard, for pointing this out. echo −n "$n " n=$(($n + 1)) echo −n "$n " : $[ n = $n + 1 ] # ":" necessary because otherwise Bash attempts #+ to interpret "$[ n = $n + 1 ]" as a command. # Works even if "n" was initialized as a string. echo −n "$n " Chapter 8. Operations and Related Topics 57 Advanced Bash−Scripting Guide n=$[ $n + 1 ] # Works even if "n" was initialized as a string. #* Avoid this type of construct, since it is obsolete and nonportable. # Thanks, Stephane Chazelas. echo −n "$n "; echo exit 0 Integer variables in Bash are actually signed long (32−bit) integers, in the range of −2147483648 to 2147483647. An operation that takes a variable outside these limits will give an erroneous result. a=2147483646 echo "a = $a" let "a+=1" echo "a = $a" let "a+=1" echo "a = $a" # # # # # # a = 2147483646 Increment "a". a = 2147483647 increment "a" again, past the limit. a = −2147483648 ERROR (out of range) As of version 2.05b, Bash supports 64−bit integers. Bash does not understand floating point arithmetic. It treats numbers containing a decimal point as strings. a=1.5 let "b = $a + 1.3" # Error. # t2.sh: let: b = 1.5 + 1.3: syntax error in expression (error token is ".5 + 1.3") echo "b = $b" # b=1 Use bc in scripts that that need floating point calculations or math library functions. bitwise operators. The bitwise operators seldom make an appearance in shell scripts. Their chief use seems to be manipulating and testing values read from ports or sockets. "Bit flipping" is more relevant to compiled languages, such as C and C++, which run fast enough to permit its use on the fly. bitwise operators << bitwise left shift (multiplies by 2 for each shift position) <<= "left−shift−equal" let "var <<= 2" results in var left−shifted 2 bits (multiplied by 4) >> bitwise right shift (divides by 2 for each shift position) >>= "right−shift−equal" (inverse of <<=) & bitwise and &= Chapter 8. Operations and Related Topics 58 Advanced Bash−Scripting Guide "bitwise and−equal" | bitwise OR |= "bitwise OR−equal" ~ bitwise negate ! bitwise NOT ^ bitwise XOR ^= "bitwise XOR−equal" logical operators && and (logical) if [ $condition1 ] && [ $condition2 ] # Same as: if [ $condition1 −a $condition2 ] # Returns true if both condition1 and condition2 hold true... if [[ $condition1 && $condition2 ]] # Also works. # Note that && operator not permitted within [ ... ] construct. && may also, depending on context, be used in an and list to concatenate commands. || or (logical) if [ $condition1 ] || [ $condition2 ] # Same as: if [ $condition1 −o $condition2 ] # Returns true if either condition1 or condition2 holds true... if [[ $condition1 || $condition2 ]] # Also works. # Note that || operator not permitted within [ ... ] construct. Bash tests the exit status of each statement linked with a logical operator. Example 8−3. Compound Condition Tests Using && and || #!/bin/bash a=24 b=47 if [ "$a" −eq 24 ] && [ "$b" −eq 47 ] then echo "Test #1 succeeds." else echo "Test #1 fails." fi Chapter 8. Operations and Related Topics 59 Advanced Bash−Scripting Guide # ERROR: if [ "$a" −eq 24 && "$b" −eq 47 ] #+ attempts to execute ' [ "$a" −eq 24 ' #+ and fails to finding matching ']'. # # Note: if [[ $a −eq 24 && $b −eq 24 ]] works. # The double−bracket if−test is more flexible #+ than the single−bracket version. # (The "&&" has a different meaning in line 17 than in line 6.) # Thanks, Stephane Chazelas, for pointing this out. if [ "$a" −eq 98 ] || [ "$b" −eq 47 ] then echo "Test #2 succeeds." else echo "Test #2 fails." fi # The −a and −o options provide #+ an alternative compound condition test. # Thanks to Patrick Callahan for pointing this out. if [ "$a" −eq 24 −a "$b" −eq 47 ] then echo "Test #3 succeeds." else echo "Test #3 fails." fi if [ "$a" −eq 98 −o "$b" −eq 47 ] then echo "Test #4 succeeds." else echo "Test #4 fails." fi a=rhino b=crocodile if [ "$a" = rhino ] && [ "$b" = crocodile ] then echo "Test #5 succeeds." else echo "Test #5 fails." fi exit 0 The && and || operators also find use in an arithmetic context. bash$ echo $(( 1 && 2 )) $((3 && 0)) $((4 || 0)) $((0 || 0)) 1010 miscellaneous operators , Chapter 8. Operations and Related Topics 60 Advanced Bash−Scripting Guide comma operator The comma operator chains together two or more arithmetic operations. All the operations are evaluated (with possible side effects), but only the last operation is returned. let "t1 = ((5 + 3, 7 − 1, 15 − 4))" echo "t1 = $t1" # t1 = 11 let "t2 = ((a = 9, 15 / 3))" echo "t2 = $t2 a = $a" # Set "a" and calculate "t2". # t2 = 5 a=9 The comma operator finds use mainly in for loops. See Example 10−12. 8.2. Numerical Constants A shell script interprets a number as decimal (base 10), unless that number has a special prefix or notation. A number preceded by a 0 is octal (base 8). A number preceded by 0x is hexadecimal (base 16). A number with an embedded # evaluates as BASE#NUMBER (with range and notational restrictions). Example 8−4. Representation of numerical constants #!/bin/bash # numbers.sh: Representation of numbers in different bases. # Decimal: the default let "dec = 32" echo "decimal number = $dec" # Nothing out of the ordinary here. # 32 # Octal: numbers preceded by '0' (zero) let "oct = 032" echo "octal number = $oct" # Expresses result in decimal. # −−−−−−−−− −−−−−− −− −−−−−−− # 26 # Hexadecimal: numbers preceded by '0x' or '0X' let "hex = 0x32" echo "hexadecimal number = $hex" # 50 # Expresses result in decimal. # Other bases: BASE#NUMBER # BASE between 2 and 64. # NUMBER must use symbols within the BASE range, see below. let "bin = 2#111100111001101" echo "binary number = $bin" let "b32 = 32#77" echo "base−32 number = $b32" # 31181 # 231 let "b64 = 64#@_" echo "base−64 number = $b64" # 4094 # # This notation only works for a limited range (2 − 64) # 10 digits + 26 lowercase characters + 26 uppercase characters + @ + _ Chapter 8. Operations and Related Topics 61 Advanced Bash−Scripting Guide echo echo $((36#zz)) $((2#10101010)) $((16#AF16)) $((53#1aA)) # 1295 170 44822 3375 # # # #+ Important note: −−−−−−−−−−−−−− Using a digit out of range of the specified base notation will give an error message. let "bad_oct = 081" # numbers.sh: let: oct = 081: value too great for base (error token is "081") # Octal numbers use only digits in the range 0 − 7. exit 0 # Thanks, Rich Bartell and Stephane Chazelas, for clarification. Chapter 8. Operations and Related Topics 62 Part 3. Beyond the Basics Table of Contents 9. Variables Revisited 9.1. Internal Variables 9.2. Manipulating Strings 9.3. Parameter Substitution 9.4. Typing variables: declare or typeset 9.5. Indirect References to Variables 9.6. $RANDOM: generate random integer 9.7. The Double Parentheses Construct 10. Loops and Branches 10.1. Loops 10.2. Nested Loops 10.3. Loop Control 10.4. Testing and Branching 11. Internal Commands and Builtins 11.1. Job Control Commands 12. External Filters, Programs and Commands 12.1. Basic Commands 12.2. Complex Commands 12.3. Time / Date Commands 12.4. Text Processing Commands 12.5. File and Archiving Commands 12.6. Communications Commands 12.7. Terminal Control Commands 12.8. Math Commands 12.9. Miscellaneous Commands 13. System and Administrative Commands 14. Command Substitution 15. Arithmetic Expansion 16. I/O Redirection 16.1. Using exec 16.2. Redirecting Code Blocks 16.3. Applications 17. Here Documents 18. Recess Time Part 3. Beyond the Basics 63 Chapter 9. Variables Revisited Used properly, variables can add power and flexibility to scripts. This requires learning their subtleties and nuances. 9.1. Internal Variables Builtin variables variables affecting bash script behavior $BASH the path to the Bash binary itself bash$ echo $BASH /bin/bash $BASH_ENV an environmental variable pointing to a Bash startup file to be read when a script is invoked $BASH_VERSINFO[n] a 6−element array containing version information about the installed release of Bash. This is similar to $BASH_VERSION, below, but a bit more detailed. # Bash version info: for n in 0 1 2 3 4 5 do echo "BASH_VERSINFO[$n] = ${BASH_VERSINFO[$n]}" done # # # # # # BASH_VERSINFO[0] BASH_VERSINFO[1] BASH_VERSINFO[2] BASH_VERSINFO[3] BASH_VERSINFO[4] BASH_VERSINFO[5] = = = = = = 2 05 8 1 release i386−redhat−linux−gnu # # # # # # # Major version no. Minor version no. Patch level. Build version. Release status. Architecture (same as $MACHTYPE). $BASH_VERSION the version of Bash installed on the system bash$ echo $BASH_VERSION 2.04.12(1)−release tcsh% echo $BASH_VERSION BASH_VERSION: Undefined variable. Checking $BASH_VERSION is a good method of determining which shell is running. $SHELL does not necessarily give the correct answer. $DIRSTACK the top value in the directory stack (affected by pushd and popd) This builtin variable corresponds to the dirs command, however dirs shows the entire contents of the directory stack. Chapter 9. Variables Revisited 64 Advanced Bash−Scripting Guide $EDITOR the default editor invoked by a script, usually vi or emacs. $EUID "effective" user ID number Identification number of whatever identity the current user has assumed, perhaps by means of su. The $EUID is not necessarily the same as the $UID. $FUNCNAME name of the current function xyz23 () { echo "$FUNCNAME now executing." } xyz23 echo "FUNCNAME = $FUNCNAME" # FUNCNAME = # Null value outside a function. # xyz23 now executing. $GLOBIGNORE A list of filename patterns to be excluded from matching in globbing. $GROUPS groups current user belongs to This is a listing (array) of the group id numbers for current user, as recorded in /etc/passwd. root# echo $GROUPS 0 root# echo ${GROUPS[1]} 1 root# echo ${GROUPS[5]} 6 $HOME home directory of the user, usually /home/username (see Example 9−13) $HOSTNAME The hostname command assigns the system name at bootup in an init script. However, the gethostname() function sets the Bash internal variable $HOSTNAME. See also Example 9−13. $HOSTTYPE host type Like $MACHTYPE, identifies the system hardware. bash$ echo $HOSTTYPE i686 $IFS internal field separator Chapter 9. Variables Revisited 65 Advanced Bash−Scripting Guide This variable determines how Bash recognizes fields, or word boundaries when it interprets character strings. $IFS defaults to whitespace (space, tab, and newline), but may be changed, for example, to parse a comma−separated data file. Note that $* uses the first character held in $IFS. See Example 5−1. bash$ echo $IFS | cat −vte $ bash$ bash −c 'set w x y z; IFS=":−;"; echo "$*"' w:x:y:z $IFS does not handle whitespace the same as it does other characters. Example 9−1. $IFS and whitespace #!/bin/bash # $IFS treats whitespace differently than other characters. output_args_one_per_line() { for arg do echo "[$arg]" done } echo; echo "IFS=\" \"" echo "−−−−−−−" IFS=" " var=" a b c " output_args_one_per_line $var # # [a] # [b] # [c] # output_args_one_per_line `echo " a bc "` echo; echo "IFS=:" echo "−−−−−" IFS=: var=":a::b:c:::" output_args_one_per_line $var # # [] # [a] # [] # [b] # [c] # [] # [] # [] # Same as above, but substitute ":" for " ". # The same thing happens with the "FS" field separator in awk. # Thank you, Stephane Chazelas. Chapter 9. Variables Revisited 66 Advanced Bash−Scripting Guide echo exit 0 (Thanks, S. C., for clarification and examples.) $IGNOREEOF ignore EOF: how many end−of−files (control−D) the shell will ignore before logging out. $LC_COLLATE Often set in the .bashrc or /etc/profile files, this variable controls collation order in filename expansion and pattern matching. If mishandled, LC_COLLATE can cause unexpected results in filename globbing. As of version 2.05 of Bash, filename globbing no longer distinguishes between lowercase and uppercase letters in a character range between brackets. For example, ls [A−M]* would match both File1.txt and file1.txt. To revert to the customary behavior of bracket matching, set LC_COLLATE to C by an export LC_COLLATE=C in /etc/profile and/or ~/.bashrc. $LC_CTYPE This internal variable controls character interpretation in globbing and pattern matching. $LINENO This variable is the line number of the shell script in which this variable appears. It has significance only within the script in which it appears, and is chiefly useful for debugging purposes. # *** BEGIN DEBUG BLOCK *** last_cmd_arg=$_ # Save it. echo "At line number $LINENO, variable \"v1\" = $v1" echo "Last command argument processed = $last_cmd_arg" # *** END DEBUG BLOCK *** $MACHTYPE machine type Identifies the system hardware. bash$ echo $MACHTYPE i686 $OLDPWD old working directory ("OLD−print−working−directory", previous directory you were in) $OSTYPE operating system type bash$ echo $OSTYPE linux $PATH path to binaries, usually /usr/bin/, /usr/X11R6/bin/, /usr/local/bin, etc. When given a command, the shell automatically does a hash table search on the directories listed in the path for the executable. The path is stored in the environmental variable, $PATH, a list of directories, separated by colons. Normally, the system stores the $PATH definition in /etc/profile and/or ~/.bashrc (see Chapter 27). Chapter 9. Variables Revisited 67 Advanced Bash−Scripting Guide bash$ echo $PATH /bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/sbin:/usr/sbin PATH=${PATH}:/opt/bin appends the /opt/bin directory to the current path. In a script, it may be expedient to temporarily add a directory to the path in this way. When the script exits, this restores the original $PATH (a child process, such as a script, may not change the environment of the parent process, the shell). The current "working directory", ./, is usually omitted from the $PATH as a security measure. $PIPESTATUS Array variable holding exit status(es) of last executed foreground pipe. Interestingly enough, this does not necessarily give the same result as the exit status of the last executed command. bash$ echo $PIPESTATUS 0 bash$ ls −al | bogus_command bash: bogus_command: command not found bash$ echo $PIPESTATUS 141 bash$ ls −al | bogus_command bash: bogus_command: command not found bash$ echo $? 127 The members of the $PIPESTATUS array hold the exit status of each respective command executed in a pipe. $PIPESTATUS[0] holds the exit status of the first command in the pipe, $PIPESTATUS[1] the exit status of the second command, and so on. The $PIPESTATUS variable may contain an erroneous 0 value in a login shell. tcsh% bash bash$ who | grep nobody | sort bash$ echo ${PIPESTATUS[*]} 0 The above lines contained in a script would produce the expected 0 1 0 output. Thank you, Wayne Pollock for pointing this out and supplying the above example. In the version 2.05b.0(1)−release of Bash, and possibly other versions as well, the $PIPESTATUS variable appears to be broken. This is a bug that will likely be fixed in a later release. $PPID The $PPID of a process is the process ID (pid) of its parent process. [19] Compare this with the pidof command. Chapter 9. Variables Revisited 68 Advanced Bash−Scripting Guide $PROMPT_COMMAND A variable holding a command to be executed just before the primary prompt, $PS1 is to be displayed. $PS1 This is the main prompt, seen at the command line. $PS2 The secondary prompt, seen when additional input is expected. It displays as ">". $PS3 The tertiary prompt, displayed in a select loop (see Example 10−29). $PS4 The quartenary prompt, shown at the beginning of each line of output when invoking a script with the −x option. It displays as "+". $PWD working directory (directory you are in at the time) This is the analog to the pwd builtin command. #!/bin/bash E_WRONG_DIRECTORY=73 clear # Clear screen. TargetDirectory=/home/bozo/projects/GreatAmericanNovel cd $TargetDirectory echo "Deleting stale files in $TargetDirectory." if [ "$PWD" != "$TargetDirectory" ] then # Keep from wiping out wrong directory by accident. echo "Wrong directory!" echo "In $PWD, rather than $TargetDirectory!" echo "Bailing out!" exit $E_WRONG_DIRECTORY fi rm −rf * rm .[A−Za−z0−9]* # Delete dotfiles. # rm −f .[^.]* ..?* to remove filenames beginning with multiple dots. # (shopt −s dotglob; rm −f *) will also work. # Thanks, S.C. for pointing this out. # Filenames may contain all characters in the 0 − 255 range, except "/". # Deleting files beginning with weird characters is left as an exercise. # Various other operations here, as necessary. echo echo "Done." echo "Old files deleted in $TargetDirectory." echo exit 0 $REPLY The default value when a variable is not supplied to read. Also applicable to select menus, but only Chapter 9. Variables Revisited 69 Advanced Bash−Scripting Guide supplies the item number of the variable chosen, not the value of the variable itself. #!/bin/bash # reply.sh # REPLY is the default value for a 'read' command. echo echo −n "What is your favorite vegetable? " read echo "Your favorite vegetable is $REPLY." # REPLY holds the value of last "read" if and only if #+ no variable supplied. echo echo −n "What is your favorite fruit? " read fruit echo "Your favorite fruit is $fruit." echo "but..." echo "Value of \$REPLY is still $REPLY." # $REPLY is still set to its previous value because #+ the variable $fruit absorbed the new "read" value. echo exit 0 $SECONDS The number of seconds the script has been running. #!/bin/bash TIME_LIMIT=10 INTERVAL=1 echo echo "Hit Control−C to exit before $TIME_LIMIT seconds." echo while [ "$SECONDS" −le "$TIME_LIMIT" ] do if [ "$SECONDS" −eq 1 ] then units=second else units=seconds fi echo "This script has been running $SECONDS $units." # On a slow or overburdened machine, the script may skip a count #+ every once in a while. sleep $INTERVAL done echo −e "\a" exit 0 # Beep! $SHELLOPTS the list of enabled shell options, a readonly variable Chapter 9. Variables Revisited 70 Advanced Bash−Scripting Guide bash$ echo $SHELLOPTS braceexpand:hashall:histexpand:monitor:history:interactive−comments:emacs $SHLVL Shell level, how deeply Bash is nested. If, at the command line, $SHLVL is 1, then in a script it will increment to 2. $TMOUT If the $TMOUT environmental variable is set to a non−zero value time, then the shell prompt will time out after time seconds. This will cause a logout. As of version 2.05b of Bash, it is now possible to use $TMOUT in a script in combination with read. # Works in scripts for Bash, versions 2.05b and later. TMOUT=3 # Prompt times out at three seconds. echo "What is your favorite song?" echo "Quickly now, you only have $TMOUT seconds to answer!" read song if [ −z "$song" ] then song="(no answer)" # Default response. fi echo "Your favorite song is $song." There are other, more complex, ways of implementing timed input in a script. One alternative is to set up a timing loop to signal the script when it times out. This also requires a signal handling routine to trap (see Example 30−5) the interrupt generated by the timing loop (whew!). Example 9−2. Timed Input #!/bin/bash # timed−input.sh # TMOUT=3 TIMELIMIT=3 useless in a script # Three seconds in this instance, may be set to different value. PrintAnswer() { if [ "$answer" = TIMEOUT ] then echo $answer else # Don't want to mix up the two instances. echo "Your favorite veggie is $answer" kill $! # Kills no longer needed TimerOn function running in background. # $! is PID of last job running in background. fi } TimerOn() Chapter 9. Variables Revisited 71 Advanced Bash−Scripting Guide { sleep $TIMELIMIT && kill −s 14 $$ & # Waits 3 seconds, then sends sigalarm to script. } Int14Vector() { answer="TIMEOUT" PrintAnswer exit 14 } trap Int14Vector 14 # Timer interrupt (14) subverted for our purposes. echo "What is your favorite vegetable " TimerOn read answer PrintAnswer # Admittedly, this is a kludgy implementation of timed input, #+ however the "−t" option to "read" simplifies this task. # See "t−out.sh", below. # If you need something really elegant... #+ consider writing the application in C or C++, #+ using appropriate library functions, such as 'alarm' and 'setitimer'. exit 0 An alternative is using stty. Example 9−3. Once more, timed input #!/bin/bash # timeout.sh # Written by Stephane Chazelas, # and modified by the document author. INTERVAL=5 # timeout interval timedout_read() { timeout=$1 varname=$2 old_tty_settings=`stty −g` stty −icanon min 0 time ${timeout}0 eval read $varname # or just stty "$old_tty_settings" # See man page for "stty". } read $varname echo; echo −n "What's your name? Quick! " timedout_read $INTERVAL your_name # This may not work on every terminal type. # The maximum timeout depends on the terminal. # (it is often 25.5 seconds). Chapter 9. Variables Revisited 72 Advanced Bash−Scripting Guide echo if [ ! −z "$your_name" ] # If name input before timeout... then echo "Your name is $your_name." else echo "Timed out." fi echo # The behavior of this script differs somewhat from "timed−input.sh". # At each keystroke, the counter resets. exit 0 Perhaps the simplest method is using the −t option to read. Example 9−4. Timed read #!/bin/bash # t−out.sh # Inspired by a suggestion from "syngin seven" (thanks). TIMELIMIT=4 # 4 seconds read −t $TIMELIMIT variable <&1 echo if [ −z "$variable" ] then echo "Timed out, variable still unset." else echo "variable = $variable" fi exit 0 # # # # Exercise for the reader: −−−−−−−−−−−−−−−−−−−−−−− Why is the redirection (<&1) necessary in line 8? What happens if it is omitted? $UID user ID number current user's user identification number, as recorded in /etc/passwd This is the current user's real id, even if she has temporarily assumed another identity through su. $UID is a readonly variable, not subject to change from the command line or within a script, and is the counterpart to the id builtin. Example 9−5. Am I root? Chapter 9. Variables Revisited 73 Advanced Bash−Scripting Guide #!/bin/bash # am−i−root.sh: ROOT_UID=0 Am I root or not? # Root has $UID 0. if [ "$UID" −eq "$ROOT_UID" ] # Will the real "root" please stand up? then echo "You are root." else echo "You are just an ordinary user (but mom loves you just the same)." fi exit 0 # ============================================================= # # Code below will not execute, because the script already exited. # An alternate method of getting to the root of matters: ROOTUSER_NAME=root username=`id −nu` # Or... username=`whoami` if [ "$username" = "$ROOTUSER_NAME" ] then echo "Rooty, toot, toot. You are root." else echo "You are just a regular fella." fi See also Example 2−2. The variables $ENV, $LOGNAME, $MAIL, $TERM, $USER, and $USERNAME are not Bash builtins. These are, however, often set as environmental variables in one of the Bash startup files. $SHELL, the name of the user's login shell, may be set from /etc/passwd or in an "init" script, and it is likewise not a Bash builtin. tcsh% echo $LOGNAME bozo tcsh% echo $SHELL /bin/tcsh tcsh% echo $TERM rxvt bash$ echo $LOGNAME bozo bash$ echo $SHELL /bin/tcsh bash$ echo $TERM rxvt Positional Parameters $0, $1, $2, etc. positional parameters, passed from command line to script, passed to a function, or set to a variable (see Example 4−5 and Example 11−14) $# Chapter 9. Variables Revisited 74 Advanced Bash−Scripting Guide number of command line arguments [20] or positional parameters (see Example 34−2) $* All of the positional parameters, seen as a single word "$*" must be quoted. $@ Same as $*, but each parameter is a quoted string, that is, the parameters are passed on intact, without interpretation or expansion. This means, among other things, that each parameter in the argument list is seen as a separate word. Of course, "$@" should be quoted. Example 9−6. arglist: Listing arguments with $* and $@ #!/bin/bash # arglist.sh # Invoke this script with several arguments, such as "one two three". E_BADARGS=65 if [ ! −n "$1" ] then echo "Usage: `basename $0` argument1 argument2 etc." exit $E_BADARGS fi echo index=1 # Initialize count. echo "Listing args with \"\$*\":" for arg in "$*" # Doesn't work properly if "$*" isn't quoted. do echo "Arg #$index = $arg" let "index+=1" done # $* sees all arguments as single word. echo "Entire arg list seen as single word." echo index=1 # Reset count. # What happens if you forget to do this? echo "Listing args with \"\$@\":" for arg in "$@" do echo "Arg #$index = $arg" let "index+=1" done # $@ sees arguments as separate words. echo "Arg list seen as separate words." echo index=1 # Reset count. echo "Listing args with \$* (unquoted):" Chapter 9. Variables Revisited 75 Advanced Bash−Scripting Guide for arg in $* do echo "Arg #$index = $arg" let "index+=1" done # Unquoted $* sees arguments as separate words. echo "Arg list seen as separate words." exit 0 Following a shift, the $@ holds the remaining command−line parameters, lacking the previous $1, which was lost. #!/bin/bash # Invoke with ./scriptname 1 2 3 4 5 echo "$@" shift echo "$@" shift echo "$@" #12345 #2345 #345 # Each "shift" loses parameter $1. # "$@" then contains the remaining parameters. The $@ special parameter finds use as a tool for filtering input into shell scripts. The cat "$@" construction accepts input to a script either from stdin or from files given as parameters to the script. See Example 12−20 and Example 12−21. The $* and $@ parameters sometimes display inconsistent and puzzling behavior, depending on the setting of $IFS. Example 9−7. Inconsistent $* and $@ behavior #!/bin/bash # Erratic behavior of the "$*" and "$@" internal Bash variables, #+ depending on whether they are quoted or not. # Inconsistent handling of word splitting and linefeeds. set −− "First one" "second" "third:one" "" "Fifth: :one" # Setting the script arguments, $1, $2, etc. echo echo 'IFS unchanged, using "$*"' c=0 for i in "$*" # quoted do echo "$((c+=1)): [$i]" # This line remains the same in every instance. # Echo args. done echo −−− echo 'IFS unchanged, using $*' c=0 for i in $* # unquoted do echo "$((c+=1)): [$i]" Chapter 9. Variables Revisited 76 Advanced Bash−Scripting Guide done echo −−− echo 'IFS unchanged, using "$@"' c=0 for i in "$@" do echo "$((c+=1)): [$i]" done echo −−− echo 'IFS unchanged, using $@' c=0 for i in $@ do echo "$((c+=1)): [$i]" done echo −−− IFS=: echo 'IFS=":", using "$*"' c=0 for i in "$*" do echo "$((c+=1)): [$i]" done echo −−− echo 'IFS=":", using $*' c=0 for i in $* do echo "$((c+=1)): [$i]" done echo −−− var=$* echo 'IFS=":", using "$var" (var=$*)' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo −−− echo 'IFS=":", using $var (var=$*)' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo −−− var="$*" echo 'IFS=":", using $var (var="$*")' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo −−− echo 'IFS=":", using "$var" (var="$*")' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo −−− Chapter 9. Variables Revisited 77 Advanced Bash−Scripting Guide echo 'IFS=":", using "$@"' c=0 for i in "$@" do echo "$((c+=1)): [$i]" done echo −−− echo 'IFS=":", using $@' c=0 for i in $@ do echo "$((c+=1)): [$i]" done echo −−− var=$@ echo 'IFS=":", using $var (var=$@)' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo −−− echo 'IFS=":", using "$var" (var=$@)' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo −−− var="$@" echo 'IFS=":", using "$var" (var="$@")' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo −−− echo 'IFS=":", using $var (var="$@")' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo # Try this script with ksh or zsh −y. exit 0 # This example script by Stephane Chazelas, # and slightly modified by the document author. The $@ and $* parameters differ only when between double quotes. Example 9−8. $* and $@ when $IFS is empty #!/bin/bash # If $IFS set, but empty, Chapter 9. Variables Revisited 78 Advanced Bash−Scripting Guide # then "$*" and "$@" do not echo positional params as expected. mecho () # Echo positional parameters. { echo "$1,$2,$3"; } IFS="" set a b c mecho "$*" mecho $* mecho $@ mecho "$@" # Set, but empty. # Positional parameters. # abc,, # a,b,c # a,b,c # a,b,c # The behavior of $* and $@ when $IFS is empty depends # on whatever Bash or sh version being run. # It is therefore inadvisable to depend on this "feature" in a script. # Thanks, S.C. exit 0 Other Special Parameters $− Flags passed to script (using set). See Example 11−14. This was originally a ksh construct adopted into Bash, and unfortunately it does not seem to work reliably in Bash scripts. One possible use for it is to have a script self−test whether it is interactive. $! PID (process ID) of last job run in background LOG=$0.log COMMAND1="sleep 100" echo "Logging PIDs background commands for script: $0" >> "$LOG" # So they can be monitored, and killed as necessary. echo >> "$LOG" # Logging commands. echo −n "PID of \"$COMMAND1\": ${COMMAND1} & echo $! >> "$LOG" # PID of "sleep 100": 1506 " >> "$LOG" # Thank you, Jacques Lederer, for suggesting this. $_ Special variable set to last argument of previous command executed. Example 9−9. Underscore variable Chapter 9. Variables Revisited 79 Advanced Bash−Scripting Guide #!/bin/bash echo $_ # /bin/bash # Just called /bin/bash to run the script. # So no output from command. # du # So no output from command. # −al (last argument) du >/dev/null echo $_ ls −al >/dev/null echo $_ : echo $_ #: $? Exit status of a command, function, or the script itself (see Example 23−6) $$ Process ID of the script itself. The $$ variable often finds use in scripts to construct "unique" temp file names (see Example A−14, Example 30−6, Example 12−26, and Example 11−24). This is usually simpler than invoking mktemp. 9.2. Manipulating Strings Bash supports a surprising number of string manipulation operations. Unfortunately, these tools lack a unified focus. Some are a subset of parameter substitution, and others fall under the functionality of the Unix expr command. This results in inconsistent command syntax and overlap of functionality, not to mention confusion. String Length ${#string} expr length $string expr "$string" : '.*' stringZ=abcABC123ABCabc echo ${#stringZ} echo `expr length $stringZ` echo `expr "$stringZ" : '.*'` # 15 # 15 # 15 Example 9−10. Inserting a blank line between paragraphs in a text file #!/bin/bash # paragraph−space.sh # Inserts a blank line between paragraphs of a single−spaced text file. # Usage: $0 "$filename.$SUFFIX" # Redirect conversion to new filename. rm −f $file # Delete original files after converting. echo "$filename.$SUFFIX" # Log what is happening to stdout. done exit 0 # Exercise: # −−−−−−−− # As it stands, this script converts *all* the files in the current #+ working directory. # Modify it to work *only* on files with a ".mac" suffix. Substring Replacement ${string/substring/replacement} Replace first match of $substring with $replacement. ${string//substring/replacement} Replace all matches of $substring with $replacement. stringZ=abcABC123ABCabc echo ${stringZ/abc/xyz} # xyzABC123ABCabc # Replaces first match of 'abc' with 'xyz'. # xyzABC123ABCxyz # Replaces all matches of 'abc' with # 'xyz'. echo ${stringZ//abc/xyz} ${string/#substring/replacement} If $substring matches front end of $string, substitute $replacement for $substring. ${string/%substring/replacement} If $substring matches back end of $string, substitute $replacement for $substring. stringZ=abcABC123ABCabc echo ${stringZ/#abc/XYZ} # XYZABC123ABCabc # Replaces front−end match of 'abc' with 'XYZ'. # abcABC123ABCXYZ # Replaces back−end match of 'abc' with 'XYZ'. echo ${stringZ/%abc/XYZ} 9.2.1. Manipulating strings using awk A Bash script may invoke the string manipulation facilities of awk as an alternative to using its built−in operations. Example 9−12. Alternate ways of extracting substrings #!/bin/bash # substring−extraction.sh String=23skidoo1 # 012345678 Bash Chapter 9. Variables Revisited 84 Advanced Bash−Scripting Guide # 123456789 awk # Note different string indexing system: # Bash numbers first character of string as '0'. # Awk numbers first character of string as '1'. echo ${String:2:4} # position 3 (0−1−2), 4 characters long # skid # The awk equivalent of ${string:pos:length} is substr(string,pos,length). echo | awk ' { print substr("'"${String}"'",3,4) # skid } ' # Piping an empty "echo" to awk gives it dummy input, #+ and thus makes it unnecessary to supply a filename. exit 0 9.2.2. Further Discussion For more on string manipulation in scripts, refer to Section 9.3 and the relevant section of the expr command listing. For script examples, see: 1. Example 12−9 2. Example 9−15 3. Example 9−16 4. Example 9−17 5. Example 9−19 9.3. Parameter Substitution Manipulating and/or expanding variables ${parameter} Same as $parameter, i.e., value of the variable parameter. In certain contexts, only the less ambiguous ${parameter} form works. May be used for concatenating variables with strings. your_id=${USER}−on−${HOSTNAME} echo "$your_id" # echo "Old \$PATH = $PATH" PATH=${PATH}:/opt/bin #Add /opt/bin to $PATH for duration of script. echo "New \$PATH = $PATH" ${parameter−default}, ${parameter:−default} If parameter not set, use default. echo ${username−`whoami`} # Echoes the result of `whoami`, if variable $username is still unset. ${parameter−default} and ${parameter:−default} are almost Chapter 9. Variables Revisited 85 Advanced Bash−Scripting Guide equivalent. The extra : makes a difference only when parameter has been declared, but is null. #!/bin/bash username0= # username0 has been declared, but is set to null. echo "username0 = ${username0−`whoami`}" # Will not echo. echo "username1 = ${username1−`whoami`}" # username1 has not been declared. # Will echo. username2= # username2 has been declared, but is set to null. echo "username2 = ${username2:−`whoami`}" # Will echo because of :− rather than just − in condition test. exit 0 The default parameter construct finds use in providing "missing" command−line arguments in scripts. DEFAULT_FILENAME=generic.data filename=${1:−$DEFAULT_FILENAME} # If not otherwise specified, the following command block operates #+ on the file "generic.data". # # Commands follow. See also Example 3−4, Example 29−2, and Example A−7. Compare this method with using an and list to supply a default command−line argument. ${parameter=default}, ${parameter:=default} If parameter not set, set it to default. Both forms nearly equivalent. The : makes a difference only when $parameter has been declared and is null, [22] as above. echo ${username=`whoami`} # Variable "username" is now set to `whoami`. ${parameter+alt_value}, ${parameter:+alt_value} If parameter set, use alt_value, else use null string. Both forms nearly equivalent. The : makes a difference only when parameter has been declared and is null, see below. echo "###### \${parameter+alt_value} ########" echo a=${param1+xyz} echo "a = $a" param2= a=${param2+xyz} #a= Chapter 9. Variables Revisited 86 Advanced Bash−Scripting Guide echo "a = $a" param3=123 a=${param3+xyz} echo "a = $a" # a = xyz # a = xyz echo echo "###### \${parameter:+alt_value} ########" echo a=${param4:+xyz} echo "a = $a" #a= param5= a=${param5:+xyz} echo "a = $a" #a= # Different result from param6=123 a=${param6+xyz} echo "a = $a" a=${param5+xyz} # a = xyz ${parameter?err_msg}, ${parameter:?err_msg} If parameter set, use it, else print err_msg. Both forms nearly equivalent. The : makes a difference only when parameter has been declared and is null, as above. Example 9−13. Using parameter substitution and error messages #!/bin/bash # Check some of the system's environmental variables. # If, for example, $USER, the name of the person at the console, is not set, #+ the machine will not recognize you. : ${HOSTNAME?} ${USER?} ${HOME?} ${MAIL?} echo echo "Name of the machine is $HOSTNAME." echo "You are $USER." echo "Your home directory is $HOME." echo "Your mail INBOX is located in $MAIL." echo echo "If you are reading this message," echo "critical environmental variables have been set." echo echo # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # The ${variablename?} construction can also check #+ for variables set within the script. ThisVariable=Value−of−ThisVariable # Note, by the way, that string variables may be set #+ to characters disallowed in their names. : ${ThisVariable?} echo "Value of ThisVariable is $ThisVariable". echo echo Chapter 9. Variables Revisited 87 Advanced Bash−Scripting Guide : ${ZZXy23AB?"ZZXy23AB has not been set."} # If ZZXy23AB has not been set, #+ then the script terminates with an error message. # You can specify the error message. # : ${ZZXy23AB?"ZZXy23AB has not been set."} # Same result with: # # # dummy_variable=${ZZXy23AB?} dummy_variable=${ZZXy23AB?"ZXy23AB has not been set."} echo ${ZZXy23AB?} >/dev/null echo "You will not see this message, because script terminated above." HERE=0 exit $HERE # Will *not* exit here. Example 9−14. Parameter substitution and "usage" messages #!/bin/bash # usage−message.sh : ${1?"Usage: $0 ARGUMENT"} # Script exits here if command−line parameter absent, #+ with following error message. # usage−message.sh: 1: Usage: usage−message.sh ARGUMENT echo "These two lines echo only if command−line parameter given." echo "command line parameter = \"$1\"" exit 0 # Will exit here only if command−line parameter present. # Check the exit status, both with and without command−line parameter. # If command−line parameter present, then "$?" is 0. # If not, then "$?" is 1. Parameter substitution and/or expansion. The following expressions are the complement to the match in expr string operations (see Example 12−9). These particular ones are used mostly in parsing file path names. Variable length / Substring removal ${#var} String length (number of characters in $var). For an array, ${#array} is the length of the first element in the array. Exceptions: ◊ ${#*} and ${#@} give the number of positional parameters. ◊ For an array, ${#array[*]} and ${#array[@]} give the number of elements in the array. Chapter 9. Variables Revisited 88 Advanced Bash−Scripting Guide Example 9−15. Length of a variable #!/bin/bash # length.sh E_NO_ARGS=65 if [ $# −eq 0 ] # Must have command−line args to demo script. then echo "Invoke this script with one or more command−line arguments." exit $E_NO_ARGS fi var01=abcdEFGH28ij echo "var01 = ${var01}" echo "Length of var01 = ${#var01}" echo "Number of command−line arguments passed to script = ${#@}" echo "Number of command−line arguments passed to script = ${#*}" exit 0 ${var#Pattern}, ${var##Pattern} Remove from $var the shortest/longest part of $Pattern that matches the front end of $var. A usage illustration from Example A−8: # Function from "days−between.sh" example. # Strips leading zero(s) from argument passed. strip_leading_zero () # Strip possible leading zero(s) { #+ from argument passed. return=${1#0} # The "1" refers to "$1" −− passed arg. } # The "0" is what to remove from "$1" −− strips zeros. Manfred Schwarb's more elaborate variation of the above: strip_leading_zero2 () # Strip possible leading zero(s), since otherwise { # Bash will interpret such numbers as octal values. shopt −s extglob # Turn on extended globbing. local val=${1##+(0)} # Use local variable, longest matching series of 0's. shopt −u extglob # Turn off extended globbing. _strip_leading_zero2=${val:−0} # If input was 0, return 0 instead of "". } Another usage illustration: echo `basename $PWD` echo "${PWD##*/}" echo echo `basename $0` echo $0 echo "${0##*/}" echo filename=test.data echo "${filename##*.}" # Basename of current working directory. # Basename of current working directory. # Name of script. # Name of script. # Name of script. # data # Extension of filename. Chapter 9. Variables Revisited 89 Advanced Bash−Scripting Guide ${var%Pattern}, ${var%%Pattern} Remove from $var the shortest/longest part of $Pattern that matches the back end of $var. Version 2 of Bash adds additional options. Example 9−16. Pattern matching in parameter substitution #!/bin/bash # patt−matching.sh # Pattern matching using the # ## % %% parameter substitution operators. var1=abcd12345abc6789 pattern1=a*c # * (wild card) matches everything between a − c. echo echo "var1 = $var1" echo "var1 = ${var1}" # abcd12345abc6789 # abcd12345abc6789 # (alternate form) echo "Number of characters in ${var1} = ${#var1}" echo echo "pattern1 = $pattern1" # a*c (everything between 'a' and 'c') echo "−−−−−−−−−−−−−−" echo '${var1#$pattern1} =' "${var1#$pattern1}" # d12345abc6789 # Shortest possible match, strips out first 3 characters abcd12345abc6789 # ^^^^^ |−| echo '${var1##$pattern1} =' "${var1##$pattern1}" # 6789 # Longest possible match, strips out first 12 characters abcd12345abc6789 # ^^^^^ |−−−−−−−−−−| echo; echo; echo pattern2=b*9 # everything between 'b' and '9' echo "var1 = $var1" # Still abcd12345abc6789 echo echo "pattern2 = $pattern2" echo "−−−−−−−−−−−−−−" echo '${var1%pattern2} =' "${var1%$pattern2}" # # Shortest possible match, strips out last 6 characters # ^^^^ echo '${var1%%pattern2} =' "${var1%%$pattern2}" # # Longest possible match, strips out last 12 characters # ^^^^ abcd12345a abcd12345abc6789 |−−−−| a abcd12345abc6789 |−−−−−−−−−−−−−| # Remember, # and ## work from the left end (beginning) of string, # % and %% work from the right end. echo exit 0 Example 9−17. Renaming file extensions: #!/bin/bash # rfe Chapter 9. Variables Revisited 90 Advanced Bash−Scripting Guide # −−− # Renaming file extensions. # # rfe old_extension new_extension # # Example: # To rename all *.gif files in working directory to *.jpg, # rfe gif jpg ARGS=2 E_BADARGS=65 if [ $# −ne "$ARGS" ] then echo "Usage: `basename $0` old_file_suffix new_file_suffix" exit $E_BADARGS fi for filename in *.$1 # Traverse list of files ending with 1st argument. do mv $filename ${filename%$1}$2 # Strip off part of filename matching 1st argument, #+ then append 2nd argument. done exit 0 Variable expansion / Substring replacement These constructs have been adopted from ksh. ${var:pos} Variable var expanded, starting from offset pos. ${var:pos:len} Expansion to a max of len characters of variable var, from offset pos. See Example A−15 for an example of the creative use of this operator. ${var/Pattern/Replacement} First match of Pattern, within var replaced with Replacement. If Replacement is omitted, then the first match of Pattern is replaced by nothing, that is, deleted. ${var//Pattern/Replacement} Global replacement. All matches of Pattern, within var replaced with Replacement. As above, if Replacement is omitted, then all occurrences of Pattern are replaced by nothing, that is, deleted. Example 9−18. Using pattern matching to parse arbitrary strings #!/bin/bash var1=abcd−1234−defg echo "var1 = $var1" t=${var1#*−*} echo "var1 (with everything, up to and including first − stripped out) = $t" Chapter 9. Variables Revisited 91 Advanced Bash−Scripting Guide # t=${var1#*−} works just the same, #+ since # matches the shortest string, #+ and * matches everything preceding, including an empty string. # (Thanks, S. C. for pointing this out.) t=${var1##*−*} echo "If var1 contains a \"−\", returns empty string... var1 = $t" t=${var1%*−*} echo "var1 (with everything from the last − on stripped out) = $t" echo # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− path_name=/home/bozo/ideas/thoughts.for.today # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− echo "path_name = $path_name" t=${path_name##/*/} echo "path_name, stripped of prefixes = $t" # Same effect as t=`basename $path_name` in this particular case. # t=${path_name%/}; t=${t##*/} is a more general solution, #+ but still fails sometimes. # If $path_name ends with a newline, then `basename $path_name` will not work, #+ but the above expression will. # (Thanks, S.C.) t=${path_name%/*.*} # Same effect as t=`dirname $path_name` echo "path_name, stripped of suffixes = $t" # These will fail in some cases, such as "../", "/foo////", # "foo/", "/". # Removing suffixes, especially when the basename has no suffix, #+ but the dirname does, also complicates matters. # (Thanks, S.C.) echo t=${path_name:11} echo "$path_name, with first 11 chars stripped off = $t" t=${path_name:11:5} echo "$path_name, with first 11 chars stripped off, length 5 = $t" echo t=${path_name/bozo/clown} echo "$path_name with \"bozo\" replaced by \"clown\" = $t" t=${path_name/today/} echo "$path_name with \"today\" deleted = $t" t=${path_name//o/O} echo "$path_name with all o's capitalized = $t" t=${path_name//o/} echo "$path_name with all o's deleted = $t" exit 0 ${var/#Pattern/Replacement} If prefix of var matches Pattern, then substitute Replacement for Pattern. ${var/%Pattern/Replacement} If suffix of var matches Pattern, then substitute Replacement for Pattern. Chapter 9. Variables Revisited 92 Advanced Bash−Scripting Guide Example 9−19. Matching patterns at prefix or suffix of string #!/bin/bash # Pattern replacement at prefix / suffix of string. v0=abc1234zip1234abc echo "v0 = $v0" echo # Original variable. # abc1234zip1234abc # Match at prefix (beginning) of string. v1=${v0/#abc/ABCDEF} # abc1234zip1234abc # |−| echo "v1 = $v1" # ABCDE1234zip1234abc # |−−−| # Match at suffix (end) of string. v2=${v0/%abc/ABCDEF} # abc1234zip123abc # |−| echo "v2 = $v2" # abc1234zip1234ABCDEF # |−−−−| echo # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Must match at beginning / end of string, #+ otherwise no replacement results. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− v3=${v0/#123/000} # Matches, but not at beginning. echo "v3 = $v3" # abc1234zip1234abc # NO REPLACEMENT. v4=${v0/%123/000} # Matches, but not at end. echo "v4 = $v4" # abc1234zip1234abc # NO REPLACEMENT. exit 0 ${!varprefix*}, ${!varprefix@} Matches all previously declared variables beginning with varprefix. xyz23=whatever xyz24= a=${!xyz*} echo "a = $a" a=${!xyz@} echo "a = $a" # # # # Expands to names of declared variables beginning with "xyz". a = xyz23 xyz24 Same as above. a = xyz23 xyz24 # Bash, version 2.04, adds this feature. 9.4. Typing variables: declare or typeset The declare or typeset builtins (they are exact synonyms) permit restricting the properties of variables. This is a very weak form of the typing available in certain programming languages. The declare command is specific to version 2 or later of Bash. The typeset command also works in ksh scripts. declare/typeset options −r readonly Chapter 9. Variables Revisited 93 Advanced Bash−Scripting Guide declare −r var1 (declare −r var1 works the same as readonly var1) This is the rough equivalent of the C const type qualifier. An attempt to change the value of a readonly variable fails with an error message. −i integer declare −i number # The script will treat subsequent occurrences of "number" as an integer. number=3 echo "Number = $number" # Number = 3 number=three echo "Number = $number" # Number = 0 # Tries to evaluate the string "three" as an integer. Certain arithmetic operations are permitted for declared integer variables without the need for expr or let. n=6/3 echo "n = $n" declare −i n n=6/3 echo "n = $n" # n = 6/3 #n=2 −a array declare −a indices The variable indices will be treated as an array. −f functions declare −f A declare −f line with no arguments in a script causes a listing of all the functions previously defined in that script. declare −f function_name A declare −f function_name in a script lists just the function named. −x export declare −x var3 This declares a variable as available for exporting outside the environment of the script itself. −x var=$value declare −x var3=373 The declare command permits assigning a value to a variable in the same statement as setting its properties. Chapter 9. Variables Revisited 94 Advanced Bash−Scripting Guide Example 9−20. Using declare to type variables #!/bin/bash func1 () { echo This is a function. } declare −f echo declare −i var1 # var1 is an integer. var1=2367 echo "var1 declared as $var1" var1=var1+1 # Integer declaration eliminates the need for 'let'. echo "var1 incremented by 1 is $var1." # Attempt to change variable declared as integer echo "Attempting to change var1 to floating point value, 2367.1." var1=2367.1 # Results in error message, with no change to variable. echo "var1 is still $var1" echo declare −r var2=13.36 # 'declare' permits setting a variable property #+ and simultaneously assigning it a value. echo "var2 declared as $var2" # Attempt to change readonly variable. var2=13.37 # Generates error message, and exit from script. echo "var2 is still $var2" exit 0 # This line will not execute. # Script will not exit here. # Lists the function above. 9.5. Indirect References to Variables Assume that the value of a variable is the name of a second variable. Is it somehow possible to retrieve the value of this second variable from the first one? For example, if a=letter_of_alphabet and letter_of_alphabet=z, can a reference to a return z? This can indeed be done, and it is called an indirect reference. It uses the unusual eval var1=\$$var2 notation. Example 9−21. Indirect References #!/bin/bash # Indirect variable referencing. a=letter_of_alphabet letter_of_alphabet=z echo # Direct reference. echo "a = $a" # Indirect reference. eval a=\$$a Chapter 9. Variables Revisited 95 Advanced Bash−Scripting Guide echo "Now a = $a" echo # Now, let's try changing the second order reference. t=table_cell_3 table_cell_3=24 echo "\"table_cell_3\" = $table_cell_3" echo −n "dereferenced \"t\" = "; eval echo \$$t # In this simple case, # eval t=\$$t; echo "\"t\" = $t" # also works (why?). echo t=table_cell_3 NEW_VAL=387 table_cell_3=$NEW_VAL echo "Changing value of \"table_cell_3\" to $NEW_VAL." echo "\"table_cell_3\" now $table_cell_3" echo −n "dereferenced \"t\" now "; eval echo \$$t # "eval" takes the two arguments "echo" and "\$$t" (set equal to $table_cell_3) echo # (Thanks, S.C., for clearing up the above behavior.) # Another method is the ${!t} notation, discussed in "Bash, version 2" section. # See also example "ex78.sh". exit 0 Example 9−22. Passing an indirect reference to awk #!/bin/bash # Another version of the "column totaler" script #+ that adds up a specified column (of numbers) in the target file. # This uses indirect references. ARGS=2 E_WRONGARGS=65 if [ $# −ne "$ARGS" ] # Check for proper no. of command line args. then echo "Usage: `basename $0` filename column−number" exit $E_WRONGARGS fi filename=$1 column_number=$2 #===== Same as original script, up to this point =====# # A multi−line awk script is invoked by awk ' ..... ' Chapter 9. Variables Revisited 96 Advanced Bash−Scripting Guide # Begin awk script. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− awk " { total += \$${column_number} # indirect reference } END { print total } " "$filename" # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # End awk script. # Indirect variable reference avoids the hassles #+ of referencing a shell variable within the embedded awk script. # Thanks, Stephane Chazelas. exit 0 This method of indirect referencing is a bit tricky. If the second order variable changes its value, then the first order variable must be properly dereferenced (as in the above example). Fortunately, the ${!variable} notation introduced with version 2 of Bash (see Example 35−2) makes indirect referencing more intuitive. 9.6. $RANDOM: generate random integer $RANDOM is an internal Bash function (not a constant) that returns a pseudorandom integer in the range 0 − 32767. $RANDOM should not be used to generate an encryption key. Example 9−23. Generating random numbers #!/bin/bash # $RANDOM returns a different random integer at each invocation. # Nominal range: 0 − 32767 (signed 16−bit integer). MAXCOUNT=10 count=1 echo echo "$MAXCOUNT random numbers:" echo "−−−−−−−−−−−−−−−−−" while [ "$count" −le $MAXCOUNT ] # Generate 10 ($MAXCOUNT) random integers. do number=$RANDOM echo $number let "count += 1" # Increment count. done echo "−−−−−−−−−−−−−−−−−" # If you need a random int within a certain range, use the 'modulo' operator. # This returns the remainder of a division operation. RANGE=500 Chapter 9. Variables Revisited 97 Advanced Bash−Scripting Guide echo number=$RANDOM let "number %= $RANGE" echo "Random number less than $RANGE echo # If you need a random int greater than a lower bound, # then set up a test to discard all numbers below that. FLOOR=200 number=0 #initialize while [ "$number" −le $FLOOR ] do number=$RANDOM done echo "Random number greater than $FLOOR −−− echo −−− $number" $number" # May combine above two techniques to retrieve random number between two limits. number=0 #initialize while [ "$number" −le $FLOOR ] do number=$RANDOM let "number %= $RANGE" # Scales $number down within $RANGE. done echo "Random number between $FLOOR and $RANGE −−− $number" echo # Generate binary choice, that is, "true" or "false" value. BINARY=2 number=$RANDOM T=1 let "number %= $BINARY" # Note that let "number >>= 14" gives a better random distribution #+ (right shifts out everything except last binary digit). if [ "$number" −eq $T ] then echo "TRUE" else echo "FALSE" fi echo # Generate toss of the dice. SPOTS=6 # Modulo 6 gives range 0 − 5. # Incrementing by 1 gives desired range of 1 − 6. # Thanks, Paulo Marcel Coelho Aragao, for the simplification. ZERO=0 die1=0 die2=0 # Tosses each die separately, and so gives correct odds. let "die1 = $RANDOM % $SPOTS +1" # Roll first one. Chapter 9. Variables Revisited 98 Advanced Bash−Scripting Guide let "die2 = $RANDOM % $SPOTS +1" # Roll second one. let "throw = $die1 + $die2" echo "Throw of the dice = $throw" echo exit 0 Example 9−24. Picking a random card from a deck #!/bin/bash # pick−card.sh # This is an example of choosing a random element of an array. # Pick a card, any card. Suites="Clubs Diamonds Hearts Spades" Denominations="2 3 4 5 6 7 8 9 10 Jack Queen King Ace" suite=($Suites) denomination=($Denominations) # Read into array variable. num_suites=${#suite[*]} # Count how many elements. num_denominations=${#denomination[*]} echo −n "${denomination[$((RANDOM%num_denominations))]} of " echo ${suite[$((RANDOM%num_suites))]} # $bozo sh pick−cards.sh # Jack of Clubs # Thank you, "jipe," for pointing out this use of $RANDOM. exit 0 Jipe points out a set of techniques for generating random numbers within a range. # Generate random number between 6 and 30. rnumber=$((RANDOM%25+6)) Chapter 9. Variables Revisited 99 Advanced Bash−Scripting Guide # Generate random number in the same 6 − 30 range, #+ but the number must be evenly divisible by 3. rnumber=$(((RANDOM%30/3+1)*3)) # Note that this will not work all the time. # It fails if $RANDOM returns 0. # Exercise: Try to figure out the pattern here. Bill Gradwohl came up with an improved formula that works for positive numbers. rnumber=$(((RANDOM%(max−min+divisibleBy))/divisibleBy*divisibleBy+min)) Here Bill presents a versatile function that returns a random number between two specified values. Example 9−25. Random between values #!/bin/bash # random−between.sh # Random number between two specified values. # Script by Bill Gradwohl, with minor modifications by the document author. # Used with permission. randomBetween() { # Generates a positive or negative random number #+ between $min and $max #+ and divisible by $divisibleBy. # Gives a "reasonably random" distribution of return values. # # Bill Gradwohl − Oct 1, 2003 syntax() { # Function echo echo echo echo echo echo echo echo echo echo echo echo echo echo } embedded within function. "Syntax: randomBetween [min] [max] [multiple]" "Expects up to 3 passed parameters, but all are completely optional." "min is the minimum value" "max is the maximum value" "multiple specifies that the answer must be a multiple of this value." " i.e. answer must be evenly divisible by this number." "If any value is missing, defaults area supplied as: 0 32767 1" "Successful completion returns 0, unsuccessful completion returns" "function syntax and 1." "The answer is returned in the global variable randomBetweenAnswer" "Negative values for any passed parameter are handled correctly." local min=${1:−0} local max=${2:−32767} local divisibleBy=${3:−1} # Default values assigned, in case parameters not passed to function. local x local spread Chapter 9. Variables Revisited 100 Advanced Bash−Scripting Guide # Let's make sure the divisibleBy value is positive. [ ${divisibleBy} −lt 0 ] && divisibleBy=$((0−divisibleBy)) # Sanity check. if [ $# −gt 3 −o ${divisibleBy} −eq 0 −o syntax return 1 fi # See if the min and max are reversed. if [ ${min} −gt ${max} ]; then # Swap them. x=${min} min=${max} max=${x} fi # If min is itself not evenly divisible by $divisibleBy, #+ then fix the min to be within range. if [ $((min/divisibleBy*divisibleBy)) −ne ${min} ]; then if [ ${min} −lt 0 ]; then min=$((min/divisibleBy*divisibleBy)) else min=$((((min/divisibleBy)+1)*divisibleBy)) fi fi # If max is itself not evenly divisible by $divisibleBy, #+ then fix the max to be within range. if [ $((max/divisibleBy*divisibleBy)) −ne ${max} ]; then if [ ${max} −lt 0 ]; then max=$((((max/divisibleBy)−1)*divisibleBy)) else max=$((max/divisibleBy*divisibleBy)) fi fi # # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Now do the real work. ${min} −eq ${max} ]; then # Note that to get a proper distribution for the end points, the #+ range of random values has to be allowed to go between 0 and #+ abs(max−min)+divisibleBy, not just abs(max−min)+1. # The slight increase will produce the proper distribution for the #+ end points. # #+ #+ #+ # Changing the formula to use abs(max−min)+1 will still produce correct answers, but the randomness of those answers is faulty in that the number of times the end points ($min and $max) are returned is considerably lower than when the correct formula is used. −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− spread=$((max−min)) [ ${spread} −lt 0 ] && spread=$((0−spread)) let spread+=divisibleBy randomBetweenAnswer=$(((RANDOM%spread)/divisibleBy*divisibleBy+min)) return 0 # However, Paulo Marcel Coelho Aragao points out that Chapter 9. Variables Revisited 101 Advanced Bash−Scripting Guide #+ when $max and $min are not divisible by $divisibleBy, #+ the formula fails. # # He suggests instead the following formula: # rnumber = $(((RANDOM%(max−min+1)+min)/divisibleBy*divisibleBy)) } # Let's test the function. min=−14 max=20 divisibleBy=3 # Generate an array of expected answers and check to make sure we get #+ at least one of each answer if we loop long enough. declare −a answer minimum=${min} maximum=${max} if [ $((minimum/divisibleBy*divisibleBy)) −ne ${minimum} ]; then if [ ${minimum} −lt 0 ]; then minimum=$((minimum/divisibleBy*divisibleBy)) else minimum=$((((minimum/divisibleBy)+1)*divisibleBy)) fi fi # If max is itself not evenly divisible by $divisibleBy, #+ then fix the max to be within range. if [ $((maximum/divisibleBy*divisibleBy)) −ne ${maximum} ]; then if [ ${maximum} −lt 0 ]; then maximum=$((((maximum/divisibleBy)−1)*divisibleBy)) else maximum=$((maximum/divisibleBy*divisibleBy)) fi fi # We need to generate only positive array subscripts, #+ so we need a displacement that that will guarantee #+ positive results. displacement=$((0−minimum)) for ((i=${minimum}; i<=${maximum}; i+=divisibleBy)); do answer[i+displacement]=0 done # Now loop a large number of times to see what we get. loopIt=1000 # The script author suggests 100000, #+ but that takes a good long while. for ((i=0; i<${loopIt}; ++i)); do # Note that we are specifying min and max in reversed order here to #+ make the function correct for this case. randomBetween ${max} ${min} ${divisibleBy} Chapter 9. Variables Revisited 102 Advanced Bash−Scripting Guide # Report an error if an answer is unexpected. [ ${randomBetweenAnswer} −lt ${min} −o ${randomBetweenAnswer} −gt ${max} ] && echo MIN or MAX [ $((randomBetweenAnswer%${divisibleBy})) −ne 0 ] && echo DIVISIBLE BY error − ${randomBetween # Store the answer away statistically. answer[randomBetweenAnswer+displacement]=$((answer[randomBetweenAnswer+displacement]+1)) done # Let's check the results for ((i=${minimum}; i<=${maximum}; i+=divisibleBy)); do [ ${answer[i+displacement]} −eq 0 ] && echo "We never got an answer of $i." || echo "${i} occu done exit 0 Just how random is $RANDOM? The best way to test this is to write a script that tracks the distribution of "random" numbers generated by $RANDOM. Let's roll a $RANDOM die a few times... Example 9−26. Rolling a single die with RANDOM #!/bin/bash # How random is RANDOM? RANDOM=$$ PIPS=6 MAXTHROWS=600 throw=0 ones=0 twos=0 threes=0 fours=0 fives=0 sixes=0 # Reseed the random number generator using script process ID. # A die has 6 pips. # Increase this, if you have nothing better to do with your time. # Throw count. # Must initialize counts to zero, #+ since an uninitialized variable is null, not zero. print_result () { echo echo "ones = $ones" echo "twos = $twos" echo "threes = $threes" echo "fours = $fours" echo "fives = $fives" echo "sixes = $sixes" echo } update_count() { case "$1" in 0) let "ones += 1";; # Since die has no "zero", this corresponds to 1. 1) let "twos += 1";; # And this to 2, etc. 2) let "threes += 1";; 3) let "fours += 1";; Chapter 9. Variables Revisited 103 Advanced Bash−Scripting Guide 4) let "fives += 1";; 5) let "sixes += 1";; esac } echo while [ "$throw" −lt "$MAXTHROWS" ] do let "die1 = RANDOM % $PIPS" update_count $die1 let "throw += 1" done print_result # # # # #+ # # # # The scores should distribute fairly evenly, assuming RANDOM is fairly random. With $MAXTHROWS at 600, all should cluster around 100, plus−or−minus 20 or so. Keep in mind that RANDOM is a pseudorandom generator, and not a spectacularly good one at that. Exercise (easy): −−−−−−−−−−−−−−− Rewrite this script to flip a coin 1000 times. Choices are "HEADS" or "TAILS". exit 0 As we have seen in the last example, it is best to "reseed" the RANDOM generator each time it is invoked. Using the same seed for RANDOM repeats the same series of numbers. (This mirrors the behavior of the random() function in C.) Example 9−27. Reseeding RANDOM #!/bin/bash # seeding−random.sh: Seeding the RANDOM variable. MAXCOUNT=25 # How many numbers to generate. random_numbers () { count=0 while [ "$count" −lt "$MAXCOUNT" ] do number=$RANDOM echo −n "$number " let "count += 1" done } echo; echo RANDOM=1 random_numbers echo; echo # Setting RANDOM seeds the random number generator. Chapter 9. Variables Revisited 104 Advanced Bash−Scripting Guide RANDOM=1 random_numbers # Same seed for RANDOM... # ...reproduces the exact same number series. # # When is it useful to duplicate a "random" number series? echo; echo RANDOM=2 random_numbers echo; echo # RANDOM=$$ seeds RANDOM from process id of script. # It is also possible to seed RANDOM from 'time' or 'date' commands. # Getting fancy... SEED=$(head −1 /dev/urandom | od −N 1 | awk '{ print $2 }') # Pseudo−random output fetched #+ from /dev/urandom (system pseudo−random device−file), #+ then converted to line of printable (octal) numbers by "od", #+ finally "awk" retrieves just one number for SEED. RANDOM=$SEED random_numbers echo; echo exit 0 # Trying again, but with a different seed... # gives a different number series. The /dev/urandom device−file provides a means of generating much more "random" pseudorandom numbers than the $RANDOM variable. dd if=/dev/urandom of=targetfile bs=1 count=XX creates a file of well−scattered pseudorandom numbers. However, assigning these numbers to a variable in a script requires a workaround, such as filtering through od (as in above example) or using dd (see Example 12−48). There are also other means of generating pseudorandom numbers in a script. Awk provides a convenient means of doing this. Example 9−28. Pseudorandom numbers, using awk #!/bin/bash # random2.sh: Returns a pseudorandom number in the range 0 − 1. # Uses the awk rand() function. AWKSCRIPT=' { srand(); print rand() } ' # Command(s) / parameters passed to awk # Note that srand() reseeds awk's random number generator. echo −n "Random number between 0 and 1 = " echo | awk "$AWKSCRIPT" # What happens if you leave out the 'echo'? exit 0 Chapter 9. Variables Revisited 105 Advanced Bash−Scripting Guide # Exercises: # −−−−−−−−− # 1) Using a loop construct, print out 10 different random numbers. # (Hint: you must reseed the "srand()" function with a different seed #+ in each pass through the loop. What happens if you fail to do this?) # 2) Using an integer multiplier as a scaling factor, generate random numbers #+ in the range between 10 and 100. # 3) Same as exercise #2, above, but generate random integers this time. The date command also lends itself to generating pseudorandom integer sequences. 9.7. The Double Parentheses Construct Similar to the let command, the ((...)) construct permits arithmetic expansion and evaluation. In its simplest form, a=$(( 5 + 3 )) would set "a" to "5 + 3", or 8. However, this double parentheses construct is also a mechanism for allowing C−type manipulation of variables in Bash. Example 9−29. C−type manipulation of variables #!/bin/bash # Manipulating a variable, C−style, using the ((...)) construct. echo (( a = 23 )) # Setting a value, C−style, with spaces on both sides of the "=". echo "a (initial value) = $a" (( a++ )) # Post−increment 'a', C−style. echo "a (after a++) = $a" (( a−− )) # Post−decrement 'a', C−style. echo "a (after a−−) = $a" (( ++a )) # Pre−increment 'a', C−style. echo "a (after ++a) = $a" (( −−a )) # Pre−decrement 'a', C−style. echo "a (after −−a) = $a" echo (( t = a<45?7:11 )) # C−style trinary operator. echo "If a < 45, then t = 7, else t = 11." echo "t = $t " # Yes! echo # −−−−−−−−−−−−−−−−− # Easter Egg alert! # −−−−−−−−−−−−−−−−− Chapter 9. Variables Revisited 106 Advanced Bash−Scripting Guide # #+ # #+ # Chet Ramey apparently snuck a bunch of undocumented C−style constructs into Bash (actually adapted from ksh, pretty much). In the Bash docs, Ramey calls ((...)) shell arithmetic, but it goes far beyond that. Sorry, Chet, the secret is now out. # See also "for" and "while" loops using the ((...)) construct. # These work only with Bash, version 2.04 or later. exit 0 See also Example 10−12. Chapter 9. Variables Revisited 107 Chapter 10. Loops and Branches Operations on code blocks are the key to structured, organized shell scripts. Looping and branching constructs provide the tools for accomplishing this. 10.1. Loops A loop is a block of code that iterates (repeats) a list of commands as long as the loop control condition is true. for loops for (in) This is the basic looping construct. It differs significantly from its C counterpart. for arg in [list] do command(s)... done During each pass through the loop, arg takes on the value of each successive variable in the list. for arg in "$var1" # In pass 1 of the # In pass 2 of the # In pass 3 of the # ... # In pass N of the "$var2" "$var3" ... "$varN" loop, $arg = $var1 loop, $arg = $var2 loop, $arg = $var3 loop, $arg = $varN # Arguments in [list] quoted to prevent possible word splitting. The argument list may contain wild cards. If do is on same line as for, there needs to be a semicolon after list. for arg in [list] ; do Example 10−1. Simple for loops #!/bin/bash # List the planets. for planet in Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto do echo $planet done echo for planet in "Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto" Chapter 10. Loops and Branches 108 Advanced Bash−Scripting Guide # Entire 'list' enclosed in quotes creates a single variable. do echo $planet done exit 0 Each [list] element may contain multiple parameters. This is useful when processing parameters in groups. In such cases, use the set command (see Example 11−14) to force parsing of each [list] element and assignment of each component to the positional parameters. Example 10−2. for loop with two parameters in each [list] element #!/bin/bash # Planets revisited. # Associate the name of each planet with its distance from the sun. for planet in "Mercury 36" "Venus 67" "Earth 93" "Mars 142" "Jupiter 483" do set −− $planet # Parses variable "planet" and sets positional parameters. # the "−−" prevents nasty surprises if $planet is null or begins with a dash. # May need to save original positional parameters, since they get overwritten. # One way of doing this is to use an array, # original_params=("$@") echo "$1 #−−−−−−−two done $2,000,000 miles from the sun" tabs−−−concatenate zeroes onto parameter $2 # (Thanks, S.C., for additional clarification.) exit 0 A variable may supply the [list] in a for loop. Example 10−3. Fileinfo: operating on a file list contained in a variable #!/bin/bash # fileinfo.sh FILES="/usr/sbin/privatepw /usr/sbin/pwck /usr/sbin/go500gw /usr/bin/fakefile /sbin/mkreiserfs /sbin/ypbind" # List of files you are curious about. # Threw in a dummy file, /usr/bin/fakefile. echo for file in $FILES do Chapter 10. Loops and Branches 109 Advanced Bash−Scripting Guide if [ ! −e "$file" ] # Check if file exists. then echo "$file does not exist."; echo continue # On to next. fi ls −l $file | awk '{ print $9 " whatis `basename $file` # File info. echo done exit 0 file size: " $5 }' # Print 2 fields. The [list] in a for loop may contain filename globbing, that is, using wildcards for filename expansion. Example 10−4. Operating on files with a for loop #!/bin/bash # list−glob.sh: Generating [list] in a for−loop using "globbing". echo for file in * do ls −l "$file" # Lists all files in $PWD (current directory). # Recall that the wild card character "*" matches every filename, # however, in "globbing", it doesn't match dot−files. # If the pattern matches no file, it is expanded to itself. # To prevent this, set the nullglob option # (shopt −s nullglob). # Thanks, S.C. done echo; echo for file in [jx]* do rm −f $file # Removes only files beginning with "j" or "x" in $PWD. echo "Removed file \"$file\"". done echo exit 0 Omitting the in [list] part of a for loop causes the loop to operate on $@, the list of arguments given on the command line to the script. A particularly clever illustration of this is Example A−17. Example 10−5. Missing in [list] in a for loop #!/bin/bash # Invoke this script both with and without arguments, #+ and see what happens. Chapter 10. Loops and Branches 110 Advanced Bash−Scripting Guide for a do echo −n "$a " done # The 'in list' missing, therefore the loop operates on '$@' #+ (command−line argument list, including whitespace). echo exit 0 It is possible to use command substitution to generate the [list] in a for loop. See also Example 12−43, Example 10−10 and Example 12−37. Example 10−6. Generating the [list] in a for loop with command substitution #!/bin/bash # for−loopcmd.sh: for−loop with [list] #+ generated by command substitution. NUMBERS="9 7 3 8 37.53" for number in `echo $NUMBERS` do echo −n "$number " done echo exit 0 # for number in 9 7 3 8 37.53 This is a somewhat more complex example of using command substitution to create the [list]. Example 10−7. A grep replacement for binary files #!/bin/bash # bin−grep.sh: Locates matching strings in a binary file. # A "grep" replacement for binary files. # Similar effect to "grep −a" E_BADARGS=65 E_NOFILE=66 if [ $# −ne 2 ] then echo "Usage: `basename $0` search_string filename" exit $E_BADARGS fi if [ ! −f "$2" ] then echo "File \"$2\" does not exist." exit $E_NOFILE fi Chapter 10. Loops and Branches 111 Advanced Bash−Scripting Guide IFS="\n" # Per suggestion of Paulo Marcel Coelho Aragao. for word in $( strings "$2" | grep "$1" ) # The "strings" command lists strings in binary files. # Output then piped to "grep", which tests for desired string. do echo $word done # As S.C. points out, lines 23 − 29 could be replaced with the simpler # strings "$2" | grep "$1" | tr −s "$IFS" '[\n*]' # Try something like exit 0 "./bin−grep.sh mem /bin/ls" to exercise this script. More of the same. Example 10−8. Listing all users on the system #!/bin/bash # userlist.sh PASSWORD_FILE=/etc/passwd n=1 # User number for name in $(awk 'BEGIN{FS=":"}{print $1}' < "$PASSWORD_FILE" ) # Field separator = : ^^^^^^ # Print first field ^^^^^^^^ # Get input from password file ^^^^^^^^^^^^^^^^^ do echo "USER #$n = $name" let "n += 1" done # # # # # USER USER USER ... USER #1 = root #2 = bin #3 = daemon #30 = bozo exit 0 A final example of the [list] resulting from command substitution. Example 10−9. Checking all the binaries in a directory for authorship #!/bin/bash # findstring.sh: # Find a particular string in binaries in a specified directory. directory=/usr/bin/ fstring="Free Software Foundation" # See which files come from the FSF. for file in $( find $directory −type f −name '*' | sort ) Chapter 10. Loops and Branches 112 Advanced Bash−Scripting Guide do strings −f $file | grep "$fstring" | sed −e "s%$directory%%" # In the "sed" expression, #+ it is necessary to substitute for the normal "/" delimiter #+ because "/" happens to be one of the characters filtered out. # Failure to do so gives an error message (try it). done exit 0 # # # #+ Exercise (easy): −−−−−−−−−−−−−−− Convert this script to taking command−line parameters for $directory and $fstring. The output of a for loop may be piped to a command or commands. Example 10−10. Listing the symbolic links in a directory #!/bin/bash # symlinks.sh: Lists symbolic links in a directory. directory=${1−`pwd`} # Defaults to current working directory, #+ if not otherwise specified. # Equivalent to code block below. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # ARGS=1 # Expect one command−line argument. # # if [ $# −ne "$ARGS" ] # If not 1 arg... # then # directory=`pwd` # current working directory # else # directory=$1 # fi # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− echo "symbolic links in directory \"$directory\"" for file in "$( find $directory −type l )" # −type l = symbolic links do echo "$file" done | sort # Otherwise file list is unsorted. # Strictly speaking, a loop isn't really necessary here, #+ since the output of the "find" command is expanded into a single word. # However, it's easy to understand and illustrative this way. # #+ #+ # As Dominik 'Aeneas' Schnitzer points out, failing to quote $( find $directory −type l ) will choke on filenames with embedded whitespace. Even this will only pick up the first field of each argument. exit 0 # Jean Helou proposes the following alternative: echo "symbolic links in directory \"$directory\"" Chapter 10. Loops and Branches 113 Advanced Bash−Scripting Guide # Backup of the current IFS. One can never be too cautious. OLDIFS=$IFS IFS=: for file in $(find $directory −type l −printf "%p$IFS") do # ^^^^^^^^^^^^^^^^ echo "$file" done|sort The stdout of a loop may be redirected to a file, as this slight modification to the previous example shows. Example 10−11. Symbolic links in a directory, saved to a file #!/bin/bash # symlinks.sh: Lists symbolic links in a directory. OUTFILE=symlinks.list directory=${1−`pwd`} # Defaults to current working directory, #+ if not otherwise specified. # save file echo "symbolic links in directory \"$directory\"" > "$OUTFILE" echo "−−−−−−−−−−−−−−−−−−−−−−−−−−−" >> "$OUTFILE" for file in "$( find $directory −type l )" do echo "$file" done | sort >> "$OUTFILE" # ^^^^^^^^^^^^^ exit 0 # −type l = symbolic links # stdout of loop redirected to save file. There is an alternative syntax to a for loop that will look very familiar to C programmers. This requires double parentheses. Example 10−12. A C−like for loop #!/bin/bash # Two ways to count up to 10. echo # Standard syntax. for a in 1 2 3 4 5 6 7 8 9 10 do echo −n "$a " done echo; echo # +==========================================+ # Now, let's do the same, using C−like syntax. Chapter 10. Loops and Branches 114 Advanced Bash−Scripting Guide LIMIT=10 for ((a=1; a <= LIMIT ; a++)) do echo −n "$a " done echo; echo # +=========================================================================+ # Let's use the C "comma operator" to increment two variables simultaneously. for ((a=1, b=1; a <= LIMIT ; a++, b++)) do echo −n "$a−$b " done echo; echo exit 0 # The comma chains together operations. # Double parentheses, and "LIMIT" with no "$". # A construct borrowed from 'ksh93'. See also Example 26−15, Example 26−16, and Example A−7. −−− Now, a for−loop used in a "real−life" context. Example 10−13. Using efax in batch mode #!/bin/bash EXPECTED_ARGS=2 E_BADARGS=65 if [ $# # Check then echo exit fi −ne $EXPECTED_ARGS ] for proper no. of command line args. "Usage: `basename $0` phone# text−file" $E_BADARGS if [ ! −f "$2" ] then echo "File $2 is not a text file" exit $E_BADARGS fi fax make $2 for file in $(ls $2.0*) do fil="$fil $file" done # Create fax formatted files from text files. # Concatenate the converted files. # Uses wild card in variable list. Chapter 10. Loops and Branches 115 Advanced Bash−Scripting Guide efax −d /dev/ttyS3 −o1 −t "T$1" $fil # Do the work. # As S.C. points out, the for−loop can be eliminated with # efax −d /dev/ttyS3 −o1 −t "T$1" $2.0* # but it's not quite as instructive [grin]. exit 0 while This construct tests for a condition at the top of a loop, and keeps looping as long as that condition is true (returns a 0 exit status). In contrast to a for loop, a while loop finds use in situations where the number of loop repetitions is not known beforehand. while [condition] do command... done As is the case with for/in loops, placing the do on the same line as the condition test requires a semicolon. while [condition] ; do Note that certain specialized while loops, as, for example, a getopts construct, deviate somewhat from the standard template given here. Example 10−14. Simple while loop #!/bin/bash var0=0 LIMIT=10 while [ "$var0" −lt "$LIMIT" ] do echo −n "$var0 " # −n suppresses newline. # ^ Space, to separate printed out numbers. var0=`expr $var0 + 1` # # # # var0=$(($var0+1)) also works. var0=$((var0 + 1)) also works. let "var0 += 1" also works. Various other methods also work. done echo exit 0 Example 10−15. Another while loop #!/bin/bash echo while [ "$var1" != "end" ] # while test "$var1" != "end" Chapter 10. Loops and Branches 116 Advanced Bash−Scripting Guide do # also works. echo "Input variable #1 (end to exit) " read var1 # Not 'read $var1' (why?). echo "variable #1 = $var1" # Need quotes because of "#". # If input is 'end', echoes it here. # Does not test for termination condition until top of loop. echo done exit 0 A while loop may have multiple conditions. Only the final condition determines when the loop terminates. This necessitates a slightly different loop syntax, however. Example 10−16. while loop with multiple conditions #!/bin/bash var1=unset previous=$var1 while echo "previous−variable = $previous" echo previous=$var1 [ "$var1" != end ] # Keeps track of what $var1 was previously. # Four conditions on "while", but only last one controls loop. # The *last* exit status is the one that counts. do echo "Input variable #1 (end to exit) " read var1 echo "variable #1 = $var1" done # Try to figure out how this all works. # It's a wee bit tricky. exit 0 As with a for loop, a while loop may employ C−like syntax by using the double parentheses construct (see also Example 9−29). Example 10−17. C−like syntax in a while loop #!/bin/bash # wh−loopc.sh: Count to 10 in a "while" loop. LIMIT=10 a=1 while [ "$a" −le $LIMIT ] do echo −n "$a " let "a+=1" done # No surprises, so far. echo; echo Chapter 10. Loops and Branches 117 Advanced Bash−Scripting Guide # +=================================================================+ # Now, repeat with C−like syntax. ((a = 1)) # a=1 # Double parentheses permit space when setting a variable, as in C. while (( a <= LIMIT )) # Double parentheses, and no "$" preceding variables. do echo −n "$a " ((a += 1)) # let "a+=1" # Yes, indeed. # Double parentheses permit incrementing a variable with C−like syntax. done echo # Now, C programmers can feel right at home in Bash. exit 0 A while loop may have its stdin redirected to a file by a < at its end. A while loop may have its stdin supplied by a pipe. until This construct tests for a condition at the top of a loop, and keeps looping as long as that condition is false (opposite of while loop). until [condition−is−true] do command... done Note that an until loop tests for the terminating condition at the top of the loop, differing from a similar construct in some programming languages. As is the case with for/in loops, placing the do on the same line as the condition test requires a semicolon. until [condition−is−true] ; do Example 10−18. until loop #!/bin/bash until [ "$var1" = end ] # Tests condition here, at top of loop. do echo "Input variable #1 " echo "(end to exit)" read var1 echo "variable #1 = $var1" done exit 0 Chapter 10. Loops and Branches 118 Advanced Bash−Scripting Guide 10.2. Nested Loops A nested loop is a loop within a loop, an inner loop within the body of an outer one. What happens is that the first pass of the outer loop triggers the inner loop, which executes to completion. Then the second pass of the outer loop triggers the inner loop again. This repeats until the outer loop finishes. Of course, a break within either the inner or outer loop may interrupt this process. Example 10−19. Nested Loop #!/bin/bash # Nested "for" loops. outer=1 # Set outer loop counter. # Beginning of outer loop. for a in 1 2 3 4 5 do echo "Pass $outer in outer loop." echo "−−−−−−−−−−−−−−−−−−−−−" inner=1 # Reset inner loop counter. # Beginning of inner loop. for b in 1 2 3 4 5 do echo "Pass $inner in inner loop." let "inner+=1" # Increment inner loop counter. done # End of inner loop. let "outer+=1" # Increment outer loop counter. echo # Space between output in pass of outer loop. done # End of outer loop. exit 0 See Example 26−11 for an illustration of nested "while" loops, and Example 26−13 to see a "while" loop nested inside an "until" loop. 10.3. Loop Control Commands Affecting Loop Behavior break, continue The break and continue loop control commands [23] correspond exactly to their counterparts in other programming languages. The break command terminates the loop (breaks out of it), while continue causes a jump to the next iteration of the loop, skipping all the remaining commands in that particular loop cycle. Example 10−20. Effects of break and continue in a loop Chapter 10. Loops and Branches 119 Advanced Bash−Scripting Guide #!/bin/bash LIMIT=19 # Upper limit echo echo "Printing Numbers 1 through 20 (but not 3 and 11)." a=0 while [ $a −le "$LIMIT" ] do a=$(($a+1)) if [ "$a" −eq 3 ] || [ "$a" −eq 11 ] # Excludes 3 and 11 then continue # Skip rest of this particular loop iteration. fi echo −n "$a " done # Exercise: # Why does loop print up to 20? echo; echo echo Printing Numbers 1 through 20, but something happens after 2. ################################################################## # Same loop, but substituting 'break' for 'continue'. a=0 while [ "$a" −le "$LIMIT" ] do a=$(($a+1)) if [ "$a" −gt 2 ] then break # Skip entire rest of loop. fi echo −n "$a " done echo; echo; echo exit 0 The break command may optionally take a parameter. A plain break terminates only the innermost loop in which it is embedded, but a break N breaks out of N levels of loop. Example 10−21. Breaking out of multiple loop levels #!/bin/bash # break−levels.sh: Breaking out of loops. # "break N" breaks out of N level loops. Chapter 10. Loops and Branches 120 Advanced Bash−Scripting Guide for outerloop in 1 2 3 4 5 do echo −n "Group $outerloop: for innerloop in 1 2 3 4 5 do echo −n "$innerloop " if [ "$innerloop" −eq 3 ] then break # Try break 2 to see what happens. # ("Breaks" out of both inner and outer loops.) fi done echo done echo exit 0 " The continue command, similar to break, optionally takes a parameter. A plain continue cuts short the current iteration within its loop and begins the next. A continue N terminates all remaining iterations at its loop level and continues with the next iteration at the loop N levels above. Example 10−22. Continuing at a higher loop level #!/bin/bash # The "continue N" command, continuing at the Nth level loop. for outer in I II III IV V do echo; echo −n "Group $outer: " for inner in 1 2 3 4 5 6 7 8 9 10 do # outer loop # inner loop if [ "$inner" −eq 7 ] then continue 2 # Continue at loop on 2nd level, that is "outer loop". # Replace above line with a simple "continue" # to see normal loop behavior. fi echo −n "$inner " done done echo; echo # Exercise: # Come up with a meaningful use for "continue N" in a script. exit 0 # 7 8 9 10 will never echo. Chapter 10. Loops and Branches 121 Advanced Bash−Scripting Guide Example 10−23. Using "continue N" in an actual task # Albert Reiner gives an example of how to use "continue N": # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # #+ #+ #+ #+ Suppose I have a large number of jobs that need to be run, with any data that is to be treated in files of a given name pattern in a directory. There are several machines that access this directory, and I want to distribute the work over these different boxen. Then I usually nohup something like the following on every box: while true do for n in .iso.* do [ "$n" = ".iso.opts" ] && continue beta=${n#.iso.} [ −r .Iso.$beta ] && continue [ −r .lock.$beta ] && sleep 10 && continue lockfile −r0 .lock.$beta || continue echo −n "$beta: " `date` run−isotherm $beta date ls −alF .Iso.$beta [ −r .Iso.$beta ] && rm −f .lock.$beta continue 2 done break done # The details, in particular the sleep N, are particular to my #+ application, but the general pattern is: while true do for job in {pattern} do {job already done or running} && continue {mark job as running, do job, mark job as done} continue 2 done break # Or something like `sleep 600' to avoid termination. done # #+ #+ #+ #+ #+ #+ #+ #+ #+ #+ This way the script will stop only when there are no more jobs to do (including jobs that were added during runtime). Through the use of appropriate lockfiles it can be run on several machines concurrently without duplication of calculations [which run a couple of hours in my case, so I really want to avoid this]. Also, as search always starts again from the beginning, one can encode priorities in the file names. Of course, one could also do this without `continue 2', but then one would have to actually check whether or not some job was done (so that we should immediately look for the next job) or not (in which case we terminate or sleep for a long time before checking for a new job). The continue N construct is difficult to understand and tricky to use in any meaningful context. It is probably best avoided. Chapter 10. Loops and Branches 122 Advanced Bash−Scripting Guide 10.4. Testing and Branching The case and select constructs are technically not loops, since they do not iterate the execution of a code block. Like loops, however, they direct program flow according to conditions at the top or bottom of the block. Controlling program flow in a code block case (in) / esac The case construct is the shell equivalent of switch in C/C++. It permits branching to one of a number of code blocks, depending on condition tests. It serves as a kind of shorthand for multiple if/then/else statements and is an appropriate tool for creating menus. case "$variable" in "$condition1" ) command... ;; "$condition2" ) command... ;; esac ◊ Quoting the variables is not mandatory, since word splitting does not take place. ◊ Each test line ends with a right paren ). ◊ Each condition block ends with a double semicolon ;;. ◊ The entire case block terminates with an esac (case spelled backwards). Example 10−24. Using case #!/bin/bash echo; echo "Hit a key, then hit return." read Keypress case "$Keypress" in [a−z] ) echo "Lowercase letter";; [A−Z] ) echo "Uppercase letter";; [0−9] ) echo "Digit";; * ) echo "Punctuation, whitespace, or other";; esac # Allows ranges of characters in [square brackets]. # # # # # # Exercise: −−−−−−−− As the script stands, # it accepts a single keystroke, then terminates. Change the script so it accepts continuous input, reports on each keystroke, and terminates only when "X" is hit. Hint: enclose everything in a "while" loop. Chapter 10. Loops and Branches 123 Advanced Bash−Scripting Guide exit 0 Example 10−25. Creating menus using case #!/bin/bash # Crude address database clear # Clear the screen. echo echo echo echo echo echo echo echo echo " Contact List" " −−−−−−− −−−−" "Choose one of the following persons:" "[E]vans, Roland" "[J]ones, Mildred" "[S]mith, Julie" "[Z]ane, Morris" read person case "$person" in # Note variable is quoted. "E" | "e" ) # Accept upper or lowercase input. echo echo "Roland Evans" echo "4321 Floppy Dr." echo "Hardscrabble, CO 80753" echo "(303) 734−9874" echo "(303) 734−9892 fax" echo "revans@zzy.net" echo "Business partner & old friend" ;; # Note double semicolon to terminate each option. "J" | "j" ) echo echo "Mildred Jones" echo "249 E. 7th St., Apt. 19" echo "New York, NY 10009" echo "(212) 533−2814" echo "(212) 533−9972 fax" echo "milliej@loisaida.com" echo "Girlfriend" echo "Birthday: Feb. 11" ;; # Add info for Smith & Zane later. *) # Default option. # Empty input (hitting RETURN) fits here, too. echo echo "Not yet in database." ;; Chapter 10. Loops and Branches 124 Advanced Bash−Scripting Guide esac echo # # # #+ Exercise: −−−−−−−− Change the script so it accepts continuous input, instead of terminating after displaying just one address. exit 0 An exceptionally clever use of case involves testing for command−line parameters. #! /bin/bash case "$1" in "") echo "Usage: ${0##*/} "; exit 65;; # No command−line parameters, # or first parameter empty. # Note that ${0##*/} is ${var##pattern} param substitution. Net result is $0. −*) FILENAME=./$1;; # If filename passed as argument ($1) starts with a dash, # replace it with ./$1 # so further commands don't interpret it as an option. # Otherwise, $1. * ) FILENAME=$1;; esac Example 10−26. Using command substitution to generate the case variable #!/bin/bash # Using command substitution to generate a "case" variable. case i386 i486 i586 i686 * esac $( arch ) in # "arch" returns machine architecture. ) echo "80386−based machine";; ) echo "80486−based machine";; ) echo "Pentium−based machine";; ) echo "Pentium2+−based machine";; ) echo "Other type of machine";; exit 0 A case construct can filter strings for globbing patterns. Example 10−27. Simple string matching #!/bin/bash # match−string.sh: simple string matching match_string () { MATCH=0 NOMATCH=90 PARAMS=2 # Function requires 2 arguments. BAD_PARAMS=91 Chapter 10. Loops and Branches 125 Advanced Bash−Scripting Guide [ $# −eq $PARAMS ] || return $BAD_PARAMS case "$1" in "$2") return $MATCH;; * ) return $NOMATCH;; esac } a=one b=two c=three d=two match_string $a echo $? match_string $a $b echo $? match_string $b $d echo $? # wrong number of parameters # 91 # no match # 90 # match #0 exit 0 Example 10−28. Checking for alphabetic input #!/bin/bash # isalpha.sh: Using a "case" structure to filter a string. SUCCESS=0 FAILURE=−1 isalpha () # Tests whether *first character* of input string is alphabetic. { if [ −z "$1" ] # No argument passed? then return $FAILURE fi case "$1" in [a−zA−Z]*) return $SUCCESS;; # Begins with a letter? * ) return $FAILURE;; esac } # Compare this with "isalpha ()" function in C. isalpha2 () # Tests whether *entire string* is alphabetic. { [ $# −eq 1 ] || return $FAILURE case $1 in *[!a−zA−Z]*|"") return $FAILURE;; *) return $SUCCESS;; esac } Chapter 10. Loops and Branches 126 Advanced Bash−Scripting Guide isdigit () # Tests whether *entire string* is numerical. { # In other words, tests for integer variable. [ $# −eq 1 ] || return $FAILURE case $1 in *[!0−9]*|"") return $FAILURE;; *) return $SUCCESS;; esac } check_var () # Front−end to isalpha (). { if isalpha "$@" then echo "\"$*\" begins with an alpha character." if isalpha2 "$@" then # No point in testing if first char is non−alpha. echo "\"$*\" contains only alpha characters." else echo "\"$*\" contains at least one non−alpha character." fi else echo "\"$*\" begins with a non−alpha character." # Also "non−alpha" if no argument passed. fi echo } digit_check () # Front−end to isdigit (). { if isdigit "$@" then echo "\"$*\" contains only digits [0 − 9]." else echo "\"$*\" has at least one non−digit character." fi echo } a=23skidoo b=H3llo c=−What? d=What? e=`echo $b` f=AbcDef g=27234 h=27a34 i=27.34 check_var check_var check_var check_var check_var check_var check_var $a $b $c $d $e $f # No argument passed, so what happens? # Command substitution. Chapter 10. Loops and Branches 127 Advanced Bash−Scripting Guide # digit_check $g digit_check $h digit_check $i exit 0 # Script improved by S.C. # Exercise: # −−−−−−−− # Write an 'isfloat ()' function that tests for floating point numbers. # Hint: The function duplicates 'isdigit ()', #+ but adds a test for a mandatory decimal point. select The select construct, adopted from the Korn Shell, is yet another tool for building menus. select variable [in list] do command... break done This prompts the user to enter one of the choices presented in the variable list. Note that select uses the PS3 prompt (#? ) by default, but that this may be changed. Example 10−29. Creating menus using select #!/bin/bash PS3='Choose your favorite vegetable: ' # Sets the prompt string. echo select vegetable in "beans" "carrots" "potatoes" "onions" "rutabagas" do echo echo "Your favorite veggie is $vegetable." echo "Yuck!" echo break # What happens if there is no 'break' here? done exit 0 If in list is omitted, then select uses the list of command line arguments ($@) passed to the script or to the function in which the select construct is embedded. Compare this to the behavior of a for variable [in list] construct with the in list omitted. Example 10−30. Creating menus using select in a function Chapter 10. Loops and Branches 128 Advanced Bash−Scripting Guide #!/bin/bash PS3='Choose your favorite vegetable: ' echo choice_of() { select vegetable # [in list] omitted, so 'select' uses arguments passed to function. do echo echo "Your favorite veggie is $vegetable." echo "Yuck!" echo break done } choice_of beans rice carrots radishes tomatoes spinach # $1 $2 $3 $4 $5 $6 # passed to choice_of() function exit 0 See also Example 35−3. Chapter 10. Loops and Branches 129 Chapter 11. Internal Commands and Builtins A builtin is a command contained within the Bash tool set, literally built in. This is either for performance reasons −− builtins execute faster than external commands, which usually require forking off a separate process −− or because a particular builtin needs direct access to the shell internals. When a command or the shell itself initiates (or spawns) a new subprocess to carry out a task, this is called forking. This new process is the "child", and the process that forked it off is the "parent". While the child process is doing its work, the parent process is still executing. Generally, a Bash builtin does not fork a subprocess when it executes within a script. An external system command or filter in a script usually will fork a subprocess. A builtin may be a synonym to a system command of the same name, but Bash reimplements it internally. For example, the Bash echo command is not the same as /bin/echo, although their behavior is almost identical. #!/bin/bash echo "This line uses the \"echo\" builtin." /bin/echo "This line uses the /bin/echo system command." A keyword is a reserved word, token or operator. Keywords have a special meaning to the shell, and indeed are the building blocks of the shell's syntax. As examples, "for", "while", "do", and "!" are keywords. Similar to a builtin, a keyword is hard−coded into Bash, but unlike a builtin, a keyword is not by itself a command, but part of a larger command structure. [24] I/O echo prints (to stdout) an expression or variable (see Example 4−1). echo Hello echo $a An echo requires the −e option to print escaped characters. See Example 5−2. Normally, each echo command prints a terminal newline, but the −n option suppresses this. An echo can be used to feed a sequence of commands down a pipe. if echo "$VAR" | grep −q txt # if [[ $VAR = *txt* ]] then echo "$VAR contains the substring sequence \"txt\"" fi An echo, in combination with command substitution can set a variable. Chapter 11. Internal Commands and Builtins 130 Advanced Bash−Scripting Guide a=`echo "HELLO" | tr A−Z a−z` See also Example 12−18, Example 12−3, Example 12−36, and Example 12−37. Be aware that echo `command` deletes any linefeeds that the output of command generates. The $IFS (internal field separator) variable normally contains \n (linefeed) as one of its set of whitespace characters. Bash therefore splits the output of command at linefeeds into arguments to echo. Then echo outputs these arguments, separated by spaces. bash$ ls −l /usr/share/apps/kjezz/sounds −rw−r−−r−− 1 root root 1407 Nov 7 2000 reflect.au −rw−r−−r−− 1 root root 362 Nov 7 2000 seconds.au bash$ echo `ls −l /usr/share/apps/kjezz/sounds` total 40 −rw−r−−r−− 1 root root 716 Nov 7 2000 reflect.au −rw−r−−r−− 1 root root 362 Nov 7 This command is a shell builtin, and not the same as /bin/echo, although its behavior is similar. bash$ type −a echo echo is a shell builtin echo is /bin/echo printf The printf, formatted print, command is an enhanced echo. It is a limited variant of the C language printf() library function, and its syntax is somewhat different. printf format−string... parameter... This is the Bash builtin version of the /bin/printf or /usr/bin/printf command. See the printf manpage (of the system command) for in−depth coverage. Older versions of Bash may not support printf. Example 11−1. printf in action #!/bin/bash # printf demo PI=3.14159265358979 DecimalConstant=31373 Message1="Greetings," Message2="Earthling." echo printf "Pi to 2 decimal places = %1.2f" $PI echo Chapter 11. Internal Commands and Builtins 131 Advanced Bash−Scripting Guide printf "Pi to 9 decimal places = %1.9f" $PI printf "\n" # It even rounds off correctly. # Prints a line feed, # equivalent to 'echo'. # Inserts tab (\t) printf "Constant = \t%d\n" $DecimalConstant printf "%s %s \n" $Message1 $Message2 echo # ==========================================# # Simulation of C function, 'sprintf'. # Loading a variable with a formatted string. echo Pi12=$(printf "%1.12f" $PI) echo "Pi to 12 decimal places = $Pi12" Msg=`printf "%s %s \n" $Message1 $Message2` echo $Msg; echo $Msg # As it happens, the 'sprintf' function can now be accessed # as a loadable module to Bash, but this is not portable. exit 0 Formatting error messages is a useful application of printf E_BADDIR=65 var=nonexistent_directory error() { printf "$@" >&2 # Formats positional params passed, and sents them to stderr. echo exit $E_BADDIR } cd $var || error $"Can't cd to %s." "$var" # Thanks, S.C. read "Reads" the value of a variable from stdin, that is, interactively fetches input from the keyboard. The −a option lets read get array variables (see Example 26−6). Example 11−2. Variable assignment, using read #!/bin/bash echo −n "Enter the value of variable 'var1': " # The −n option to echo suppresses newline. read var1 # Note no '$' in front of var1, since it is being set. Chapter 11. Internal Commands and Builtins 132 Advanced Bash−Scripting Guide echo "var1 = $var1" echo # A single 'read' statement can set multiple variables. echo −n "Enter the values of variables 'var2' and 'var3' (separated by a space or tab): " read var2 var3 echo "var2 = $var2 var3 = $var3" # If you input only one value, the other variable(s) will remain unset (null). exit 0 A read without an associated variable assigns its input to the dedicated variable $REPLY. Example 11−3. What happens when read has no variable #!/bin/bash echo # −−−−−−−−−−−−−−−−−−−−−−−−−− # echo −n "Enter a value: " read var echo "\"var\" = "$var"" # Everything as expected here. # −−−−−−−−−−−−−−−−−−−−−−−−−− # echo # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # echo −n "Enter another value: " read # No variable supplied for 'read', therefore... #+ Input to 'read' assigned to default variable, $REPLY. var="$REPLY" echo "\"var\" = "$var"" # This is equivalent to the first code block. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # echo exit 0 Normally, inputting a \ suppresses a newline during input to a read. The −r option causes an inputted \ to be interpreted literally. Example 11−4. Multi−line input to read #!/bin/bash echo echo "Enter a string terminated by a \\, then press ." echo "Then, enter a second string, and again press ." read var1 # The "\" suppresses the newline, when reading "var1". # first line \ Chapter 11. Internal Commands and Builtins 133 Advanced Bash−Scripting Guide # second line echo "var1 = $var1" # var1 = first line second line # For each line terminated by a "\", # you get a prompt on the next line to continue feeding characters into var1. echo; echo echo "Enter another string terminated by a \\ , then press ." read −r var2 # The −r option causes the "\" to be read literally. # first line \ echo "var2 = $var2" # var2 = first line \ # Data entry terminates with the first . echo exit 0 The read command has some interesting options that permit echoing a prompt and even reading keystrokes without hitting ENTER. # Read a keypress without hitting ENTER. read −s −n1 −p "Hit a key " keypress echo; echo "Keypress was "\"$keypress\""." # −s option means do not echo input. # −n N option means accept only N characters of input. # −p option means echo the following prompt before reading input. # Using these options is tricky, since they need to be in the correct order. The −n option to read also allows detection of the arrow keys and certain of the other unusual keys. Example 11−5. Detecting the arrow keys #!/bin/bash # arrow−detect.sh: Detects the arrow keys, and a few more. # Thank you, Sandro Magi, for showing me how. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Character codes generated by the keypresses. arrowup='\[A' arrowdown='\[B' arrowrt='\[C' arrowleft='\[D' insert='\[2' delete='\[3' # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− SUCCESS=0 OTHER=65 Chapter 11. Internal Commands and Builtins 134 Advanced Bash−Scripting Guide echo −n "Press a key... " # May need to also press ENTER if a key not listed above pressed. read −n3 key # Read 3 characters. echo −n "$key" | grep "$arrowup" if [ "$?" −eq $SUCCESS ] then echo "Up−arrow key pressed." exit $SUCCESS fi echo −n "$key" | grep "$arrowdown" if [ "$?" −eq $SUCCESS ] then echo "Down−arrow key pressed." exit $SUCCESS fi echo −n "$key" | grep "$arrowrt" if [ "$?" −eq $SUCCESS ] then echo "Right−arrow key pressed." exit $SUCCESS fi echo −n "$key" | grep "$arrowleft" if [ "$?" −eq $SUCCESS ] then echo "Left−arrow key pressed." exit $SUCCESS fi echo −n "$key" | grep "$insert" if [ "$?" −eq $SUCCESS ] then echo "\"Insert\" key pressed." exit $SUCCESS fi echo −n "$key" | grep "$delete" if [ "$?" −eq $SUCCESS ] then echo "\"Delete\" key pressed." exit $SUCCESS fi #Check if character code detected. echo " Some other key pressed." exit $OTHER # # # #+ # Exercises: −−−−−−−−− 1) Simplify this script by rewriting the multiple "if" tests as a 'case' construct. 2) Add detection of the "Home," "End," "PgUp," and "PgDn" keys. The −t option to read permits timed input (see Example 9−4). The read command may also "read" its variable value from a file redirected to stdin. If the file contains more than one line, only the first line is assigned to the variable. If read has more than one Chapter 11. Internal Commands and Builtins 135 Advanced Bash−Scripting Guide parameter, then each of these variables gets assigned a successive whitespace−delineated string. Caution! Example 11−6. Using read with file redirection #!/bin/bash read var1 ; ... To force variable substitution try: $export WEBROOT_PATH=/usr/local/webroot $sed 's//$WEBROOT_PATH/' < test.pl > out But this just gives: my $WEBROOT = $WEBROOT_PATH; However: $export WEBROOT_PATH=/usr/local/webroot $eval sed 's%\%$WEBROOT_PATH%' < test.pl > out # ==== Chapter 11. Internal Commands and Builtins 141 Advanced Bash−Scripting Guide That works fine, and gives the expected substitution: my $WEBROOT = /usr/local/webroot; ### Correction applied to original example by Paulo Marcel Coelho Aragao. The eval command can be risky, and normally should be avoided when there exists a reasonable alternative. An eval $COMMANDS executes the contents of COMMANDS, which may contain such unpleasant surprises as rm −rf *. Running an eval on unfamiliar code written by persons unknown is living dangerously. set The set command changes the value of internal script variables. One use for this is to toggle option flags which help determine the behavior of the script. Another application for it is to reset the positional parameters that a script sees as the result of a command (set `command`). The script can then parse the fields of the command output. Example 11−14. Using set with positional parameters #!/bin/bash # script "set−test" # Invoke this script with three command line parameters, # for example, "./set−test one two three". echo echo echo echo echo "Positional parameters "Command−line argument "Command−line argument "Command−line argument before set \`uname −a\` :" #1 = $1" #2 = $2" #3 = $3" set `uname −a` # Sets the positional parameters to the output # of the command `uname −a` echo $_ # unknown # Flags set in script. echo "Positional parameters after set \`uname −a\` :" # $1, $2, $3, etc. reinitialized to result of `uname −a` echo "Field #1 of 'uname −a' = $1" echo "Field #2 of 'uname −a' = $2" echo "Field #3 of 'uname −a' = $3" echo −−− echo $_ # −−− echo exit 0 Invoking set without any options or arguments simply lists all the environmental and other variables that have been initialized. bash$ set AUTHORCOPY=/home/bozo/posts BASH=/bin/bash Chapter 11. Internal Commands and Builtins 142 Advanced Bash−Scripting Guide BASH_VERSION=$'2.05.8(1)−release' ... XAUTHORITY=/home/bozo/.Xauthority _=/etc/bashrc variable22=abc variable23=xzy Using set with the −− option explicitly assigns the contents of a variable to the positional parameters. When no variable follows the −−, it unsets the positional parameters. Example 11−15. Reassigning the positional parameters #!/bin/bash variable="one two three four five" set −− $variable # Sets positional parameters to the contents of "$variable". first_param=$1 second_param=$2 shift; shift # Shift past first two positional params. remaining_params="$*" echo echo "first parameter = $first_param" echo "second parameter = $second_param" echo "remaining parameters = $remaining_params" echo; echo # Again. set −− $variable first_param=$1 second_param=$2 echo "first parameter = $first_param" echo "second parameter = $second_param" # one # two # three four five # one # two # ====================================================== set −− # Unsets positional parameters if no variable specified. first_param=$1 second_param=$2 echo "first parameter = $first_param" echo "second parameter = $second_param" exit 0 # (null value) # (null value) See also Example 10−2 and Example 12−44. unset The unset command deletes a shell variable, effectively setting it to null. Note that this command does not affect positional parameters. bash$ unset PATH Chapter 11. Internal Commands and Builtins 143 Advanced Bash−Scripting Guide bash$ echo $PATH bash$ Example 11−16. "Unsetting" a variable #!/bin/bash # unset.sh: Unsetting a variable. variable=hello echo "variable = $variable" unset variable echo "(unset) variable = $variable" exit 0 # Initialized. # Unset. # Same effect as variable= # $variable is null. export The export command makes available variables to all child processes of the running script or shell. Unfortunately, there is no way to export variables back to the parent process, to the process that called or invoked the script or shell. One important use of export command is in startup files, to initialize and make accessible environmental variables to subsequent user processes. Example 11−17. Using export to pass a variable to an embedded awk script #!/bin/bash # Yet another version of the "column totaler" script (col−totaler.sh) #+ that adds up a specified column (of numbers) in the target file. # This uses the environment to pass a script variable to 'awk'. ARGS=2 E_WRONGARGS=65 if [ $# −ne "$ARGS" ] # Check for proper no. of command line args. then echo "Usage: `basename $0` filename column−number" exit $E_WRONGARGS fi filename=$1 column_number=$2 #===== Same as original script, up to this point =====# export column_number # Export column number to environment, so it's available for retrieval. # Begin awk script. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− awk '{ total += $ENVIRON["column_number"] } END { print total }' $filename # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # End awk script. Chapter 11. Internal Commands and Builtins 144 Advanced Bash−Scripting Guide # Thanks, Stephane Chazelas. exit 0 It is possible to initialize and export variables in the same operation, as in export var1=xxx. However, as Greg Keraunen points out, in certain situations this may have a different effect than setting a variable, then exporting it. bash$ export var=(a b); echo ${var[0]} (a b) bash$ var=(a b); export var; echo ${var[0]} a declare, typeset The declare and typeset commands specify and/or restrict properties of variables. readonly Same as declare −r, sets a variable as read−only, or, in effect, as a constant. Attempts to change the variable fail with an error message. This is the shell analog of the C language const type qualifier. getopts This powerful tool parses command−line arguments passed to the script. This is the Bash analog of the getopt external command and the getopt library function familiar to C programmers. It permits passing and concatenating multiple options [25] and associated arguments to a script (for example scriptname −abc −e /usr/local). The getopts construct uses two implicit variables. $OPTIND is the argument pointer (OPTion INDex) and $OPTARG (OPTion ARGument) the (optional) argument attached to an option. A colon following the option name in the declaration tags that option as having an associated argument. A getopts construct usually comes packaged in a while loop, which processes the options and arguments one at a time, then decrements the implicit $OPTIND variable to step to the next. 1. The arguments passed from the command line to the script must be preceded by a minus (−) or a plus (+). It is the prefixed − or + that lets getopts recognize command−line arguments as options. In fact, getopts will not process arguments without the prefixed − or +, and will terminate option processing at the first argument encountered lacking them. 2. The getopts template differs slightly from the standard while loop, in that it lacks condition brackets. 3. The getopts construct replaces the deprecated getopt external command. while getopts ":abcde:fg" Option # Initial declaration. # a, b, c, d, e, f, and g are the options (flags) expected. # The : after option 'e' shows it will have an argument passed with it. do case $Option in Chapter 11. Internal Commands and Builtins 145 Advanced Bash−Scripting Guide a ) # Do something with variable 'a'. b ) # Do something with variable 'b'. ... e) # Do something with 'e', and also with $OPTARG, # which is the associated argument passed with option 'e'. ... g ) # Do something with variable 'g'. esac done shift $(($OPTIND − 1)) # Move argument pointer to next. # All this is not nearly as complicated as it looks . Example 11−18. Using getopts to read the options/arguments passed to a script #!/bin/bash # Exercising getopts and OPTIND # Script modified 10/09/03 at the suggestion of Bill Gradwohl. # Here we observe how 'getopts' processes command line arguments to script. # The arguments are parsed as "options" (flags) and associated arguments. # Try invoking this script with # 'scriptname −mn' # 'scriptname −oq qOption' (qOption can be some arbitrary string.) # 'scriptname −qXXX −r' # # 'scriptname −qr' − Unexpected result, takes "r" as the argument to option "q" # 'scriptname −q −r' − Unexpected result, same as above # 'scriptname −mnop −mnop' − Unexpected result # (OPTIND is unreliable at stating where an option came from). # # If an option expects an argument ("flag:"), then it will grab #+ whatever is next on the command line. NO_ARGS=0 E_OPTERROR=65 if [ $# −eq "$NO_ARGS" ] # Script invoked with no command−line args? then echo "Usage: `basename $0` options (−mnopqrs)" exit $E_OPTERROR # Exit and explain usage, if no argument(s) given. fi # Usage: scriptname −options # Note: dash (−) necessary while getopts ":mnopq:rs" Option do case $Option in m ) echo "Scenario #1: option −m− [OPTIND=${OPTIND}]";; n | o ) echo "Scenario #2: option −$Option− [OPTIND=${OPTIND}]";; p ) echo "Scenario #3: option −p− [OPTIND=${OPTIND}]";; q ) echo "Scenario #4: option −q−\ with argument \"$OPTARG\" [OPTIND=${OPTIND}]";; # Note that option 'q' must have an associated argument, #+ otherwise it falls through to the default. Chapter 11. Internal Commands and Builtins 146 Advanced Bash−Scripting Guide r | s ) echo "Scenario #5: option −$Option−";; * ) echo "Unimplemented option chosen.";; esac done # DEFAULT shift $(($OPTIND − 1)) # Decrements the argument pointer so it points to next argument. # $1 now references the first non option item supplied on the command line #+ if one exists. exit 0 # As Bill Gradwohl states, # "The getopts mechanism allows one to specify: scriptname −mnop −mnop #+ but there is no reliable way to differentiate what came from where #+ by using OPTIND." Script Behavior source, . (dot command) This command, when invoked from the command line, executes a script. Within a script, a source file−name loads the file file−name. This is the shell scripting equivalent of a C/C++ #include directive. It is useful in situations when multiple scripts use a common data file or function library. Example 11−19. "Including" a data file #!/bin/bash . data−file # Load a data file. # Same effect as "source data−file", but more portable. # The file "data−file" must be present in current working directory, #+ since it is referred to by its 'basename'. # Now, reference some data from that file. echo "variable1 (from data−file) = $variable1" echo "variable3 (from data−file) = $variable3" let "sum = $variable2 + $variable4" echo "Sum of variable2 + variable4 (from data−file) = $sum" echo "message1 (from data−file) is \"$message1\"" # Note: escaped quotes print_message This is the message−print function in the data−file. exit 0 File data−file for Example 11−19, above. Must be present in same directory. # This is a data file loaded by a script. # Files of this type may contain variables, functions, etc. # It may be loaded with a 'source' or '.' command by a shell script. # Let's initialize some variables. Chapter 11. Internal Commands and Builtins 147 Advanced Bash−Scripting Guide variable1=22 variable2=474 variable3=5 variable4=97 message1="Hello, how are you?" message2="Enough for now. Goodbye." print_message () { # Echoes any message passed to it. if [ −z "$1" ] then return 1 # Error, if argument missing. fi echo until [ −z "$1" ] do # Step through arguments passed to function. echo −n "$1" # Echo args one at a time, suppressing line feeds. echo −n " " # Insert spaces between words. shift # Next one. done echo return 0 } It is even possible for a script to source itself, though this does not seem to have any practical applications. Example 11−20. A (useless) script that sources itself #!/bin/bash # self−source.sh: a script sourcing itself "recursively." # From "Stupid Script Tricks," Volume II. MAXPASSCNT=100 # Maximum number of execution passes. echo −n "$pass_count " # At first execution pass, this just echoes two blank spaces, #+ since $pass_count still uninitialized. let "pass_count += 1" # Assumes the uninitialized variable $pass_count #+ can be incremented the first time around. # This works with Bash and pdksh, but #+ it relies on non−portable (and possibly dangerous) behavior. # Better would be to set $pass_count to 0 if non−initialized. Chapter 11. Internal Commands and Builtins 148 Advanced Bash−Scripting Guide while [ "$pass_count" −le $MAXPASSCNT ] do . $0 # Script "sources" itself, rather than calling itself. # ./$0 (which would be true recursion) doesn't work here. done # #+ #+ #+ # # # #+ What occurs here is not actually recursion, since the script effectively "expands" itself (generates a new section of code) with each pass throught the 'while' loop', with each 'source' in line 20. Of course, the script interprets each newly 'sourced' "#!" line as a comment, and not as the start of a new script. echo exit 0 # The net effect is counting from 1 to 100. # Very impressive. # Exercise: # −−−−−−−− # Write a script that uses this trick to do something useful. exit Unconditionally terminates a script. The exit command may optionally take an integer argument, which is returned to the shell as the exit status of the script. It is good practice to end all but the simplest scripts with an exit 0, indicating a successful run. If a script terminates with an exit lacking an argument, the exit status of the script is the exit status of the last command executed in the script, not counting the exit. exec This shell builtin replaces the current process with a specified command. Normally, when the shell encounters a command, it forks off a child process to actually execute the command. Using the exec builtin, the shell does not fork, and the command exec'ed replaces the shell. When used in a script, therefore, it forces an exit from the script when the exec'ed command terminates. For this reason, if an exec appears in a script, it would probably be the final command. Example 11−21. Effects of exec #!/bin/bash exec echo "Exiting \"$0\"." # Exit from script here. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # The following lines never execute. echo "This echo will never echo." exit 99 # # #+ # This script will not exit here. Check exit value after script terminates with an 'echo $?'. It will *not* be 99. Example 11−22. A script that exec's itself Chapter 11. Internal Commands and Builtins 149 Advanced Bash−Scripting Guide #!/bin/bash # self−exec.sh echo echo "This line appears ONCE in the script, yet it keeps echoing." echo "The PID of this instance of the script is still $$." # Demonstrates that a subshell is not forked off. echo "==================== Hit Ctl−C to exit ====================" sleep 1 exec $0 # Spawns another instance of this same script #+ that replaces the previous one. # Why not? echo "This line will never echo!" exit 0 An exec also serves to reassign file descriptors. exec $IMAGE_DIRECTORY/$CONTENTSFILE # The "l" option gives a "long" file listing. # The "R" option makes the listing recursive. # The "F" option marks the file types (directories get a trailing /). echo "Creating table of contents." # Create an image file preparatory to burning it onto the CDR. Chapter 12. External Filters, Programs and Commands 156 Advanced Bash−Scripting Guide mkisofs −r −o $IMAGEFILE $IMAGE_DIRECTORY echo "Creating ISO9660 file system image ($IMAGEFILE)." # Burn the CDR. cdrecord −v −isosize speed=$SPEED dev=0,0 $IMAGEFILE echo "Burning the disk." echo "Please be patient, this will take a while." exit 0 cat, tac cat, an acronym for concatenate, lists a file to stdout. When combined with redirection (> or >>), it is commonly used to concatenate files. # Uses of 'cat' cat filename cat file.1 file.2 file.3 > file.123 # Lists the file. # Combines three files into one. The −n option to cat inserts consecutive numbers before all lines of the target file(s). The −b option numbers only the non−blank lines. The −v option echoes nonprintable characters, using ^ notation. The −s option squeezes multiple consecutive blank lines into a single blank line. See also Example 12−24 and Example 12−20. In a pipe, it may be more efficient to redirect the stdin to a file, rather than to cat the file. cat filename | tr a−z A−Z tr a−z A−Z < filename # Same effect, but starts one less process, #+ and also dispenses with the pipe. tac, is the inverse of cat, listing a file backwards from its end. rev reverses each line of a file, and outputs to stdout. This is not the same effect as tac, as it preserves the order of the lines, but flips each one around. bash$ cat file1.txt This is line 1. This is line 2. bash$ tac file1.txt This is line 2. This is line 1. bash$ rev file1.txt .1 enil si sihT .2 enil si sihT cp This is the file copy command. cp file1 file2 copies file1 to file2, overwriting file2 if it already exists (see Example 12−6). Chapter 12. External Filters, Programs and Commands 157 Advanced Bash−Scripting Guide Particularly useful are the −a archive flag (for copying an entire directory tree) and the −r and −R recursive flags. mv This is the file move command. It is equivalent to a combination of cp and rm. It may be used to move multiple files to a directory, or even to rename a directory. For some examples of using mv in a script, see Example 9−17 and Example A−3. When used in a non−interactive script, mv takes the −f (force) option to bypass user input. When a directory is moved to a preexisting directory, it becomes a subdirectory of the destination directory. bash$ mv source_directory target_directory bash$ ls −lF target_directory total 1 drwxrwxr−x 2 bozo bozo 1024 May 28 19:20 source_directory/ rm Delete (remove) a file or files. The −f option forces removal of even readonly files, and is useful for bypassing user input in a script. The rm command will, by itself, fail to remove filenames beginning with a dash. bash$ rm −badname rm: invalid option −− b Try `rm −−help' for more information. The way to accomplish this is to preface the filename to be removed with a dot−slash . bash$ rm ./−badname When used with the recursive flag −r, this command removes files all the way down the directory tree from the current directory. rmdir Remove directory. The directory must be empty of all files, including invisible "dotfiles", [28] for this command to succeed. mkdir Make directory, creates a new directory. For example, mkdir −p project/programs/December creates the named directory. The −p option automatically creates any necessary parent directories. chmod Changes the attributes of an existing file (see Example 11−11). chmod +x filename # Makes "filename" executable for all users. chmod u+s filename # Sets "suid" bit on "filename" permissions. # An ordinary user may execute "filename" with same privileges as the file's owner. Chapter 12. External Filters, Programs and Commands 158 Advanced Bash−Scripting Guide # (This does not apply to shell scripts.) chmod 644 filename # Makes "filename" readable/writable to owner, readable to # others # (octal mode). chmod 1777 directory−name # Gives everyone read, write, and execute permission in directory, # however also sets the "sticky bit". # This means that only the owner of the directory, # owner of the file, and, of course, root # can delete any particular file in that directory. chattr Change file attributes. This has the same effect as chmod above, but with a different invocation syntax, and it works only on an ext2 filesystem. ln Creates links to pre−existings files. A "link" is a reference to a file, an alternate name for it. The ln command permits referencing the linked file by more than one name and is a superior alternative to aliasing (see Example 4−6). The ln creates only a reference, a pointer to the file only a few bytes in size. The ln command is most often used with the −s, symbolic or "soft" link flag. An advantage of using the −s flag is that it permits linking across file systems. The syntax of the command is a bit tricky. For example: ln −s oldfile newfile links the previously existing oldfile to the newly created link, newfile. If a file named newfile has previously existed, it will be deleted when the filename newfile is preempted as the name for a link. Which type of link to use? As John Macdonald explains it: Both of these provide a certain measure of dual reference −− if you edit the contents of the file using any name, your changes will affect both the original name and either a hard or soft new name. The differences between them occurs when you work at a higher level. The advantage of a hard link is that the new name is totally independent of the old name −− if you remove or rename the old name, that does not affect the hard link, which continues to point to the data while it would leave a soft link hanging pointing to the old name which is no longer there. The advantage of a soft link is that it can refer to a different file system (since it is just a reference to a file name, not to actual data). Links give the ability to invoke a script (or any other type of executable) with multiple names, and having that script behave according to how it was invoked. Example 12−2. Hello or Good−bye Chapter 12. External Filters, Programs and Commands 159 Advanced Bash−Scripting Guide #!/bin/bash # hello.sh: Saying "hello" or "goodbye" #+ depending on how script is invoked. # # # # # Make a link in current working directory ($PWD) to this script: ln −s hello.sh goodbye Now, try invoking this script both ways: ./hello.sh ./goodbye HELLO_CALL=65 GOODBYE_CALL=66 if [ $0 = "./goodbye" ] then echo "Good−bye!" # Some other goodbye−type commands, as appropriate. exit $GOODBYE_CALL fi echo "Hello!" # Some other hello−type commands, as appropriate. exit $HELLO_CALL man, info These commands access the manual and information pages on system commands and installed utilities. When available, the info pages usually contain a more detailed description than do the man pages. 12.2. Complex Commands Commands for more advanced users find −exec COMMAND \; Carries out COMMAND on each file that find matches. The command sequence terminates with \; (the ";" is escaped to make certain the shell passes it to find literally). bash$ find ~/ −name '*.txt' /home/bozo/.kde/share/apps/karm/karmdata.txt /home/bozo/misc/irmeyc.txt /home/bozo/test−scripts/1.txt If COMMAND contains {}, then find substitutes the full path name of the selected file for "{}". find ~/ −name 'core*' −exec rm {} \; # Removes all core dump files from user's home directory. find /home/bozo/projects −mtime 1 # Lists all files in /home/bozo/projects directory tree #+ that were modified within the last day. # # mtime = last modification time of the target file Chapter 12. External Filters, Programs and Commands 160 Advanced Bash−Scripting Guide # # ctime = last status change time (via 'chmod' or otherwise) atime = last access time DIR=/home/bozo/junk_files find "$DIR" −type f −atime +5 −exec rm {} \; # ^^ # Curly brackets are placeholder for the pathname output by "find." # # Deletes all files in "/home/bozo/junk_files" #+ that have not been accessed in at least 5 days. # # "−type filetype", where # f = regular file # d = directory, etc. # (The 'find' manpage has a complete listing.) find /etc −exec grep '[0−9][0−9]*[.][0−9][0−9]*[.][0−9][0−9]*[.][0−9][0−9]*' {} \; # Finds all IP addresses (xxx.xxx.xxx.xxx) in /etc directory files. # There a few extraneous hits − how can they be filtered out? # Perhaps by: find /etc −type f −exec cat '{}' \; | tr −c '.[:digit:]' '\n' \ | grep '^[^.][^.]*\.[^.][^.]*\.[^.][^.]*\.[^.][^.]*$' # [:digit:] is one of the character classes # introduced with the POSIX 1003.2 standard. # Thanks, S.C. The −exec option to find should not be confused with the exec shell builtin. Example 12−3. Badname, eliminate file names in current directory containing bad characters and whitespace. #!/bin/bash # badname.sh # Delete filenames in current directory containing bad characters. for filename in * do badname=`echo "$filename" | sed −n /[\+\{\;\"\\\=\?~\(\)\<\>\&\*\|\$]/p` # badname=`echo "$filename" | sed −n '/[+{;"\=?~()<>&*|$]/p'` also works. # Deletes files containing these nasties: +{;"\=?~()<>&*|$ # rm $badname 2>/dev/null # ^^^^^^^^^^^ Error messages deep−sixed. done # Now, take care of files containing all manner of whitespace. find . −name "* *" −exec rm −f {} \; # The path name of the file that "find" finds replaces the "{}". # The '\' ensures that the ';' is interpreted literally, as end of command. exit 0 #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Chapter 12. External Filters, Programs and Commands 161 Advanced Bash−Scripting Guide # Commands below this line will not execute because of "exit" command. # An alternative to the above script: find . −name '*[+{;"\\=?~()<>&*|$ ]*' −exec rm −f '{}' \; # (Thanks, S.C.) Example 12−4. Deleting a file by its inode number #!/bin/bash # idelete.sh: Deleting a file by its inode number. # This is useful when a filename starts with an illegal character, #+ such as ? or −. ARGCOUNT=1 E_WRONGARGS=70 E_FILE_NOT_EXIST=71 E_CHANGED_MIND=72 # Filename arg must be passed to script. if [ $# −ne "$ARGCOUNT" ] then echo "Usage: `basename $0` filename" exit $E_WRONGARGS fi if [ ! −e "$1" ] then echo "File \""$1"\" does not exist." exit $E_FILE_NOT_EXIST fi inum=`ls −i | grep "$1" | awk '{print $1}'` # inum = inode (index node) number of file # Every file has an inode, a record that hold its physical address info. echo; echo −n "Are you absolutely sure you want to delete \"$1\" (y/n)? " # The '−v' option to 'rm' also asks this. read answer case "$answer" in [nN]) echo "Changed your mind, huh?" exit $E_CHANGED_MIND ;; *) echo "Deleting file \"$1\".";; esac find . −inum $inum −exec rm {} \; # ^^ # Curly brackets are placeholder #+ for text output by "find." echo "File "\"$1"\" deleted!" exit 0 See Example 12−25, Example 3−4, and Example 10−9 for scripts using find. Its manpage provides more detail on this complex and powerful command. xargs A filter for feeding arguments to a command, and also a tool for assembling the commands themselves. It breaks a data stream into small enough chunks for filters and commands to process. Chapter 12. External Filters, Programs and Commands 162 Advanced Bash−Scripting Guide Consider it as a powerful replacement for backquotes. In situations where backquotes fail with a too many arguments error, substituting xargs often works. Normally, xargs reads from stdin or from a pipe, but it can also be given the output of a file. The default command for xargs is echo. This means that input piped to xargs may have linefeeds and other whitespace characters stripped out. bash$ ls −l total 0 −rw−rw−r−− −rw−rw−r−− 1 bozo 1 bozo bozo bozo 0 Jan 29 23:58 file1 0 Jan 29 23:58 file2 bash$ ls −l | xargs total 0 −rw−rw−r−− 1 bozo bozo 0 Jan 29 23:58 file1 −rw−rw−r−− 1 bozo bozo 0 Jan 29 23:58 ls | xargs −p −l gzip gzips every file in current directory, one at a time, prompting before each operation. An interesting xargs option is −n NN, which limits to NN the number of arguments passed. ls | xargs −n 8 echo lists the files in the current directory in 8 columns. Another useful option is −0, in combination with find −print0 or grep −lZ. This allows handling arguments containing whitespace or quotes. find / −type f −print0 | xargs −0 grep −liwZ GUI | xargs −0 rm −f grep −rliwZ GUI / | xargs −0 rm −f Either of the above will remove any file containing "GUI". (Thanks, S.C.) Example 12−5. Logfile: Using xargs to monitor system log #!/bin/bash # Generates a log file in current directory # from the tail end of /var/log/messages. # Note: /var/log/messages must be world readable # if this script invoked by an ordinary user. # #root chmod 644 /var/log/messages LINES=5 ( date; uname −a ) >>logfile # Time and machine name echo −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− >>logfile tail −$LINES /var/log/messages | xargs | fmt −s >>logfile echo >>logfile echo >>logfile Chapter 12. External Filters, Programs and Commands 163 Advanced Bash−Scripting Guide exit 0 # Exercise: # −−−−−−−− # Modify this script to track changes in /var/log/messages at intervals #+ of 20 minutes. # Hint: Use the "watch" command. As in find, a curly bracket pair serves as a placeholder for replacement text. Example 12−6. Copying files in current directory to another #!/bin/bash # copydir.sh # Copy (verbose) all files in current directory ($PWD) #+ to directory specified on command line. E_NOARGS=65 if [ −z "$1" ] # Exit if no argument given. then echo "Usage: `basename $0` directory−to−copy−to" exit $E_NOARGS fi ls # # # # # # # #+ #+ # # #+ #+ . | xargs −i −t cp ./{} $1 ^^ ^^ ^^ −t is "verbose" (output command line to stderr) option. −i is "replace strings" option. {} is a placeholder for output text. This is similar to the use of a curly bracket pair in "find." List the files (ls), pass the output of "ls" as arguments to "xargs" (−i −t options), then copy (cp) these arguments ({}) to new directory ($1). The net result is the exact equivalent of cp * $1 unless any of the filenames has "whitespace" characters. exit 0 Example 12−7. Killing processes by name #!/bin/bash # kill−byname.sh: Killing processes by name. # Compare this script with kill−process.sh. # For instance, #+ try "./kill−byname.sh xterm" −− #+ and watch all the xterms on your desktop disappear. # # # Warning: −−−−−−− This is a fairly dangerous script. Chapter 12. External Filters, Programs and Commands 164 Advanced Bash−Scripting Guide # Running it carelessly (especially as root) #+ can cause data loss and other undesirable effects. E_BADARGS=66 if test −z "$1" # No command line arg supplied? then echo "Usage: `basename $0` Process(es)_to_kill" exit $E_BADARGS fi PROCESS_NAME="$1" ps ax | grep "$PROCESS_NAME" | awk '{print $1}' | xargs −i kill {} 2&>/dev/null # ^^ ^^ # # # # # # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Notes: −i is the "replace strings" option to xargs. The curly brackets are the placeholder for the replacement. 2&>/dev/null suppresses unwanted error messages. −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− exit $? Example 12−8. Word frequency analysis using xargs #!/bin/bash # wf2.sh: Crude word frequency analysis on a text file. # Uses 'xargs' to decompose lines of text into single words. # Compare this example to the "wf.sh" script later on. # Check for input file on command line. ARGS=1 E_BADARGS=65 E_NOFILE=66 if [ $# −ne "$ARGS" ] # Correct number of arguments passed to script? then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ ! −f "$1" ] # Check if file exists. then echo "File \"$1\" does not exist." exit $E_NOFILE fi ######################################################## cat "$1" | xargs −n1 | \ # List the file, one word per line. tr A−Z a−z | \ # Shift characters to lowercase. sed −e 's/\.//g' −e 's/\,//g' −e 's/ /\ Chapter 12. External Filters, Programs and Commands 165 Advanced Bash−Scripting Guide /g' | \ # Filter out periods and commas, and #+ change space between words to linefeed, sort | uniq −c | sort −nr # Finally prefix occurrence count and sort numerically. ######################################################## # This does the same job as the "wf.sh" example, #+ but a bit more ponderously, and it runs more slowly. exit 0 expr All−purpose expression evaluator: Concatenates and evaluates the arguments according to the operation given (arguments must be separated by spaces). Operations may be arithmetic, comparison, string, or logical. expr 3 + 5 returns 8 expr 5 % 3 returns 2 expr 5 \* 3 returns 15 The multiplication operator must be escaped when used in an arithmetic expression with expr. y=`expr $y + 1` Increment a variable, with the same effect as let y=y+1 and y=$(($y+1)). This is an example of arithmetic expansion. z=`expr substr $string $position $length` Extract substring of $length characters, starting at $position. Example 12−9. Using expr #!/bin/bash # Demonstrating some of the uses of 'expr' # ======================================= echo # Arithmetic Operators # −−−−−−−−−− −−−−−−−−− echo "Arithmetic Operators" echo a=`expr 5 + 3` echo "5 + 3 = $a" a=`expr $a + 1` echo echo "a + 1 = $a" echo "(incrementing a variable)" a=`expr 5 % 3` # modulo echo echo "5 mod 3 = $a" Chapter 12. External Filters, Programs and Commands 166 Advanced Bash−Scripting Guide echo echo # Logical Operators # −−−−−−− −−−−−−−−− # Returns 1 if true, 0 if false, #+ opposite of normal Bash convention. echo "Logical Operators" echo x=24 y=25 b=`expr $x = $y` echo "b = $b" echo # Test equality. # 0 ( $x −ne $y ) a=3 b=`expr $a \> 10` echo 'b=`expr $a \> 10`, therefore...' echo "If a > 10, b = 0 (false)" echo "b = $b" # 0 ( 3 ! −gt 10 ) echo b=`expr $a \< 10` echo "If a < 10, b = 1 (true)" echo "b = $b" # 1 ( 3 −lt 10 ) echo # Note escaping of operators. b=`expr $a \<= 3` echo "If a <= 3, b = 1 (true)" echo "b = $b" # 1 ( 3 −le 3 ) # There is also a "\>=" operator (greater than or equal to). echo echo # Comparison Operators # −−−−−−−−−− −−−−−−−−− echo "Comparison Operators" echo a=zipper echo "a is $a" if [ `expr $a = snap` ] # Force re−evaluation of variable 'a' then echo "a is not zipper" fi echo echo # String Operators # −−−−−− −−−−−−−−− Chapter 12. External Filters, Programs and Commands 167 Advanced Bash−Scripting Guide echo "String Operators" echo a=1234zipper43231 echo "The string being operated upon is \"$a\"." # length: length of string b=`expr length $a` echo "Length of \"$a\" is $b." # index: position of first character in substring # that matches a character in string b=`expr index $a 23` echo "Numerical position of first \"2\" in \"$a\" is \"$b\"." # substr: extract substring, starting position & length specified b=`expr substr $a 2 6` echo "Substring of \"$a\", starting at position 2,\ and 6 chars long is \"$b\"." # The default behavior of the 'match' operations is to #+ search for the specified match at the ***beginning*** of the string. # # uses Regular Expressions b=`expr match "$a" '[0−9]*'` # Numerical count. echo Number of digits at the beginning of \"$a\" is $b. b=`expr match "$a" '\([0−9]*\)'` # Note that escaped parentheses # == == + trigger substring match. echo "The digits at the beginning of \"$a\" are \"$b\"." echo exit 0 The : operator can substitute for match. For example, b=`expr $a : [0−9]*` is the exact equivalent of b=`expr match $a [0−9]*` in the above listing. #!/bin/bash echo echo "String operations using \"expr \$string : \" construct" echo "===================================================" echo a=1234zipper5FLIPPER43231 echo "The string being operated upon is \"`expr "$a" : '\(.*\)'`\"." # Escaped parentheses grouping operator. == == # #+ #+ # *************************** Escaped parentheses match a substring *************************** # If no escaped parentheses... #+ then 'expr' converts the string operand to an integer. echo "Length of \"$a\" is `expr "$a" : '.*'`." # Length of string Chapter 12. External Filters, Programs and Commands 168 Advanced Bash−Scripting Guide echo "Number of digits at the beginning of \"$a\" is `expr "$a" : '[0−9]*'`." # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # echo echo "The digits at the beginning of \"$a\" are `expr "$a" : '\([0−9]*\)'`." # == == echo "The first 7 characters of \"$a\" are `expr "$a" : '\(.......\)'`." # ===== == == # Again, escaped parentheses force a substring match. # echo "The last 7 characters of \"$a\" are `expr "$a" : '.*\(.......\)'`." # ==== end of string operator ^^ # (actually means skip over one or more of any characters until specified #+ substring) echo exit 0 This example illustrates how expr uses the escaped parentheses −− \( ... \) −− grouping operator in tandem with regular expression parsing to match a substring. Perl, sed, and awk have far superior string parsing facilities. A short sed or awk "subroutine" within a script (see Section 34.2) is an attractive alternative to using expr. See Section 9.2 for more on string operations. 12.3. Time / Date Commands Time/date and timing date Simply invoked, date prints the date and time to stdout. Where this command gets interesting is in its formatting and parsing options. Example 12−10. Using date #!/bin/bash # Exercising the 'date' command echo "The number of days since the year's beginning is `date +%j`." # Needs a leading '+' to invoke formatting. # %j gives day of year. echo "The number of seconds elapsed since 01/01/1970 is `date +%s`." # %s yields number of seconds since "UNIX epoch" began, #+ but how is this useful? prefix=temp suffix=$(date +%s) # The "+%s" option to 'date' is GNU−specific. filename=$prefix.$suffix echo $filename # It's great for creating "unique" temp filenames, Chapter 12. External Filters, Programs and Commands 169 Advanced Bash−Scripting Guide #+ even better than using $$. # Read the 'date' man page for more formatting options. exit 0 The −u option gives the UTC (Universal Coordinated Time). bash$ date Fri Mar 29 21:07:39 MST 2002 bash$ date −u Sat Mar 30 04:07:42 UTC 2002 The date command has quite a number of output options. For example %N gives the nanosecond portion of the current time. One interesting use for this is to generate six−digit random integers. date +%N | sed −e 's/000$//' −e 's/^0//' ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # Strip off leading and trailing zeroes, if present. See also Example 3−4. zdump Time zone dump: echoes the time in a specified time zone. bash$ zdump EST EST Tue Sep 18 22:09:22 2001 EST time Outputs very verbose timing statistics for executing a command. time ls −l / gives something like this: 0.00user 0.01system 0:00.05elapsed 16%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (149major+27minor)pagefaults 0swaps See also the very similar times command in the previous section. As of version 2.0 of Bash, time became a shell reserved word, with slightly altered behavior in a pipeline. touch Utility for updating access/modification times of a file to current system time or other specified time, but also useful for creating a new file. The command touch zzz will create a new file of zero length, named zzz, assuming that zzz did not previously exist. Time−stamping empty files in this way is useful for storing date information, for example in keeping track of modification times on a project. The touch command is equivalent to : >> newfile or >> newfile (for ordinary files). Chapter 12. External Filters, Programs and Commands 170 Advanced Bash−Scripting Guide at The at job control command executes a given set of commands at a specified time. Superficially, it resembles cron, however, at is chiefly useful for one−time execution of a command set. at 2pm January 15 prompts for a set of commands to execute at that time. These commands should be shell−script compatible, since, for all practical purposes, the user is typing in an executable shell script a line at a time. Input terminates with a Ctl−D. Using either the −f option or input redirection (<), at reads a command list from a file. This file is an executable shell script, though it should, of course, be noninteractive. Particularly clever is including the run−parts command in the file to execute a different set of scripts. bash$ at 2:30 am Friday < at−jobs.list job 2 at 2000−10−27 02:30 batch The batch job control command is similar to at, but it runs a command list when the system load drops below .8. Like at, it can read commands from a file with the −f option. cal Prints a neatly formatted monthly calendar to stdout. Will do current year or a large range of past and future years. sleep This is the shell equivalent of a wait loop. It pauses for a specified number of seconds, doing nothing. It can be useful for timing or in processes running in the background, checking for a specific event every so often (polling), as in Example 30−6. sleep 3 # Pauses 3 seconds. The sleep command defaults to seconds, but minute, hours, or days may also be specified. sleep 3 h # Pauses 3 hours! The watch command may be a better choice than sleep for running commands at timed intervals. usleep Microsleep (the "u" may be read as the Greek "mu", or micro− prefix). This is the same as sleep, above, but "sleeps" in microsecond intervals. It can be used for fine−grain timing, or for polling an ongoing process at very frequent intervals. usleep 30 # Pauses 30 microseconds. This command is part of the Red Hat initscripts / rc−scripts package. The usleep command does not provide particularly accurate timing, and is therefore unsuitable for critical timing loops. hwclock, clock The hwclock command accesses or adjusts the machine's hardware clock. Some options require root privileges. The /etc/rc.d/rc.sysinit startup file uses hwclock to set the system time from the hardware clock at bootup. Chapter 12. External Filters, Programs and Commands 171 Advanced Bash−Scripting Guide The clock command is a synonym for hwclock. 12.4. Text Processing Commands Commands affecting text and text files sort File sorter, often used as a filter in a pipe. This command sorts a text stream or file forwards or backwards, or according to various keys or character positions. Using the −m option, it merges presorted input files. The info page lists its many capabilities and options. See Example 10−9, Example 10−10, and Example A−9. tsort Topological sort, reading in pairs of whitespace−separated strings and sorting according to input patterns. uniq This filter removes duplicate lines from a sorted file. It is often seen in a pipe coupled with sort. cat list−1 list−2 list−3 | sort | uniq > final.list # Concatenates the list files, # sorts them, # removes duplicate lines, # and finally writes the result to an output file. The useful −c option prefixes each line of the input file with its number of occurrences. bash$ cat testfile This line occurs only once. This line occurs twice. This line occurs twice. This line occurs three times. This line occurs three times. This line occurs three times. bash$ uniq −c testfile 1 This line occurs only once. 2 This line occurs twice. 3 This line occurs three times. bash$ sort testfile | uniq −c | sort −nr 3 This line occurs three times. 2 This line occurs twice. 1 This line occurs only once. The sort INPUTFILE | uniq −c | sort −nr command string produces a frequency of occurrence listing on the INPUTFILE file (the −nr options to sort cause a reverse numerical sort). This template finds use in analysis of log files and dictionary lists, and wherever the lexical structure of a document needs to be examined. Example 12−11. Word Frequency Analysis Chapter 12. External Filters, Programs and Commands 172 Advanced Bash−Scripting Guide #!/bin/bash # wf.sh: Crude word frequency analysis on a text file. # This is a more efficient version of the "wf2.sh" script. # Check for input file on command line. ARGS=1 E_BADARGS=65 E_NOFILE=66 if [ $# −ne "$ARGS" ] # Correct number of arguments passed to script? then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ ! −f "$1" ] # Check if file exists. then echo "File \"$1\" does not exist." exit $E_NOFILE fi ######################################################## # main () sed −e 's/\.//g' −e 's/\,//g' −e 's/ /\ /g' "$1" | tr 'A−Z' 'a−z' | sort | uniq −c | sort −nr # ========================= # Frequency of occurrence # Filter out periods and commas, and #+ change space between words to linefeed, #+ then shift characters to lowercase, and #+ finally prefix occurrence count and sort numerically. ######################################################## # Exercises: # −−−−−−−−− # 1) Add 'sed' commands to filter out other punctuation, #+ such as semicolons. # 2) Modify to also filter out multiple spaces and other whitespace. # 3) Add a secondary sort key, so that instances of equal occurrence #+ are sorted alphabetically. exit 0 bash$ cat testfile This line occurs only once. This line occurs twice. This line occurs twice. This line occurs three times. This line occurs three times. This line occurs three times. bash$ ./wf.sh testfile 6 this 6 occurs 6 line 3 times 3 three Chapter 12. External Filters, Programs and Commands 173 Advanced Bash−Scripting Guide 2 twice 1 only 1 once expand, unexpand The expand filter converts tabs to spaces. It is often used in a pipe. The unexpand filter converts spaces to tabs. This reverses the effect of expand. cut A tool for extracting fields from files. It is similar to the print $N command set in awk, but more limited. It may be simpler to use cut in a script than awk. Particularly important are the −d (delimiter) and −f (field specifier) options. Using cut to obtain a listing of the mounted filesystems: cat /etc/mtab | cut −d ' ' −f1,2 Using cut to list the OS and kernel version: uname −a | cut −d" " −f1,3,11,12 Using cut to extract message headers from an e−mail folder: bash$ grep '^Subject:' read−messages | cut −c10−80 Re: Linux suitable for mission−critical apps? MAKE MILLIONS WORKING AT HOME!!! Spam complaint Re: Spam complaint Using cut to parse a file: # List all the users in /etc/passwd. FILENAME=/etc/passwd for user in $(cut −d: −f1 $FILENAME) do echo $user done # Thanks, Oleg Philon for suggesting this. cut −d ' ' −f2,3 filename is equivalent to awk −F'[ ]' '{ print $2, $3 }' filename See also Example 12−37. paste Tool for merging together different files into a single, multi−column file. In combination with cut, useful for creating system log files. join Consider this a special−purpose cousin of paste. This powerful utility allows merging two files in a meaningful fashion, which essentially creates a simple version of a relational database. Chapter 12. External Filters, Programs and Commands 174 Advanced Bash−Scripting Guide The join command operates on exactly two files, but pastes together only those lines with a common tagged field (usually a numerical label), and writes the result to stdout. The files to be joined should be sorted according to the tagged field for the matchups to work properly. File: 1.data 100 Shoes 200 Laces 300 Socks File: 2.data 100 $40.00 200 $1.00 300 $2.00 bash$ join 1.data 2.data File: 1.data 2.data 100 Shoes $40.00 200 Laces $1.00 300 Socks $2.00 The tagged field appears only once in the output. head lists the beginning of a file to stdout (the default is 10 lines, but this can be changed). It has a number of interesting options. Example 12−12. Which files are scripts? #!/bin/bash # script−detector.sh: Detects scripts within a directory. TESTCHARS=2 SHABANG='#!' # Test first 2 characters. # Scripts begin with a "sha−bang." for file in * # Traverse all the files in current directory. do if [[ `head −c$TESTCHARS "$file"` = "$SHABANG" ]] # head −c2 #! # The '−c' option to "head" outputs a specified #+ number of characters, rather than lines (the default). then echo "File \"$file\" is a script." else echo "File \"$file\" is *not* a script." fi done exit 0 Example 12−13. Generating 10−digit random numbers #!/bin/bash Chapter 12. External Filters, Programs and Commands 175 Advanced Bash−Scripting Guide # rnd.sh: Outputs a 10−digit random number # Script by Stephane Chazelas. head −c4 /dev/urandom | od −N4 −tu4 | sed −ne '1s/.* //p' # =================================================================== # # Analysis # −−−−−−−− # head: # −c4 option takes first 4 bytes. # od: # −N4 option limits output to 4 bytes. # −tu4 option selects unsigned decimal format for output. # sed: # −n option, in combination with "p" flag to the "s" command, # outputs only matched lines. # The author of this script explains the action of 'sed', as follows. # head −c4 /dev/urandom | od −N4 −tu4 | sed −ne '1s/.* //p' # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−> | # Assume output up to "sed" −−−−−−−−> | # is 0000000 1198195154\n # # # # # # # # # # sed begins reading characters: 0000000 1198195154\n. Here it finds a newline character, so it is ready to process the first line (0000000 1198195154). It looks at its s. The first and only one is range 1 action s/.* //p The line number is in the range, so it executes the action: tries to substitute the longest string ending with a space in the line ("0000000 ") with nothing (//), and if it succeeds, prints the result ("p" is a flag to the "s" command here, this is different from the "p" command). # sed is now ready to continue reading its input. (Note that before # continuing, if −n option had not been passed, sed would have printed # the line once again). # # # # Now, sed reads the remainder of the characters, and finds the end of the file. It is now ready to process its 2nd line (which is also numbered '$' as it's the last one). It sees it is not matched by any , so its job is done. # In few word this sed commmand means: # "On the first line only, remove any character up to the right−most space, # then print it." # A better way to do this would have been: # sed −e 's/.* //;q' Chapter 12. External Filters, Programs and Commands 176 Advanced Bash−Scripting Guide # Here, two s (could have been written # sed −e 's/.* //' −e q): # # # range nothing (matches line) nothing (matches line) action s/.* // q (quit) # Here, sed only reads its first line of input. # It performs both actions, and prints the line (substituted) before quitting # (because of the "q" action) since the "−n" option is not passed. # =================================================================== # # A simpler altenative to the above 1−line script would be: # head −c4 /dev/urandom| od −An −tu4 exit 0 See also Example 12−33. tail lists the end of a file to stdout (the default is 10 lines). Commonly used to keep track of changes to a system logfile, using the −f option, which outputs lines appended to the file. Example 12−14. Using tail to monitor the system log #!/bin/bash filename=sys.log cat /dev/null > $filename; echo "Creating / cleaning out file." # Creates file if it does not already exist, #+ and truncates it to zero length if it does. # : > filename and > filename also work. tail /var/log/messages > $filename # /var/log/messages must have world read permission for this to work. echo "$filename contains tail end of system log." exit 0 See also Example 12−5, Example 12−33 and Example 30−6. grep A multi−purpose file search tool that uses Regular Expressions. It was originally a command/filter in the venerable ed line editor: g/re/p −− global − regular expression − print. grep pattern [file...] Search the target file(s) for occurrences of pattern, where pattern may be literal text or a Regular Expression. bash$ grep '[rst]ystem.$' osinfo.txt The GPL governs the distribution of the Linux operating system. Chapter 12. External Filters, Programs and Commands 177 Advanced Bash−Scripting Guide If no target file(s) specified, grep works as a filter on stdout, as in a pipe. bash$ ps ax | grep clock 765 tty1 S 0:00 xclock 901 pts/1 S 0:00 grep clock The −i option causes a case−insensitive search. The −w option matches only whole words. The −l option lists only the files in which matches were found, but not the matching lines. The −r (recursive) option searches files in the current working directory and all subdirectories below it. The −n option lists the matching lines, together with line numbers. bash$ grep −n Linux osinfo.txt 2:This is a file containing information about Linux. 6:The GPL governs the distribution of the Linux operating system. The −v (or −−invert−match) option filters out matches. grep pattern1 *.txt | grep −v pattern2 # Matches all lines in "*.txt" files containing "pattern1", # but ***not*** "pattern2". The −c (−−count) option gives a numerical count of matches, rather than actually listing the matches. grep −c txt *.sgml # (number of occurrences of "txt" in "*.sgml" files) # grep −cz . # ^ dot # means count (−c) zero−separated (−z) items matching "." # that is, non−empty ones (containing at least 1 character). # printf 'a b\nc d\n\n\n\n\n\000\n\000e\000\000\nf' | grep −cz . printf 'a b\nc d\n\n\n\n\n\000\n\000e\000\000\nf' | grep −cz '$' printf 'a b\nc d\n\n\n\n\n\000\n\000e\000\000\nf' | grep −cz '^' # printf 'a b\nc d\n\n\n\n\n\000\n\000e\000\000\nf' | grep −c '$' # By default, newline chars (\n) separate items to match. # Note that the −z option is GNU "grep" specific. #4 #5 #5 #9 # Thanks, S.C. When invoked with more than one target file given, grep specifies which file contains matches. Chapter 12. External Filters, Programs and Commands 178 Advanced Bash−Scripting Guide bash$ grep Linux osinfo.txt misc.txt osinfo.txt:This is a file containing information about Linux. osinfo.txt:The GPL governs the distribution of the Linux operating system. misc.txt:The Linux operating system is steadily gaining in popularity. To force grep to show the filename when searching only one target file, simply give /dev/null as the second file. bash$ grep Linux osinfo.txt /dev/null osinfo.txt:This is a file containing information about Linux. osinfo.txt:The GPL governs the distribution of the Linux operating system. If there is a successful match, grep returns an exit status of 0, which makes it useful in a condition test in a script, especially in combination with the −q option to suppress output. SUCCESS=0 word=Linux filename=data.file grep −q "$word" "$filename" # if grep lookup succeeds # The "−q" option causes nothing to echo to stdout. if [ $? −eq $SUCCESS ] # if grep −q "$word" "$filename" can replace lines 5 − 7. then echo "$word found in $filename" else echo "$word not found in $filename" fi Example 30−6 demonstrates how to use grep to search for a word pattern in a system logfile. Example 12−15. Emulating "grep" in a script #!/bin/bash # grp.sh: Very crude reimplementation of 'grep'. E_BADARGS=65 if [ −z "$1" ] # Check for argument to script. then echo "Usage: `basename $0` pattern" exit $E_BADARGS fi echo for file in * # Traverse all files in $PWD. do output=$(sed −n /"$1"/p $file) # Command substitution. if [ ! −z "$output" ] # What happens if "$output" is not quoted? then echo −n "$file: " echo $output fi # sed −ne "/$1/s|^|${file}: |p" is equivalent to above. Chapter 12. External Filters, Programs and Commands 179 Advanced Bash−Scripting Guide echo done echo exit 0 # # # # Exercises: −−−−−−−−− 1) Add newlines to output, if more than one match in any given file. 2) Add features. egrep (extended grep) is the same as grep −E. This uses a somewhat different, extended set of Regular Expressions, which can make the search a bit more flexible. fgrep (fast grep) is the same as grep −F. It does a literal string search (no regular expressions), which allegedly speeds things up a bit. agrep (approximate grep) extends the capabilities of grep to approximate matching. The search string may differ by a specified number of characters from the resulting matches. This utility is not part of the core Linux distribution. To search compressed files, use zgrep, zegrep, or zfgrep. These also work on non−compressed files, though slower than plain grep, egrep, fgrep. They are handy for searching through a mixed set of files, some compressed, some not. To search bzipped files, use bzgrep. look The command look works like grep, but does a lookup on a "dictionary", a sorted word list. By default, look searches for a match in /usr/dict/words, but a different dictionary file may be specified. Example 12−16. Checking words in a list for validity #!/bin/bash # lookup: Does a dictionary lookup on each word in a data file. file=words.data echo while [ "$word" != end ] # Last word in data file. do read word # From data file, because of redirection at end of loop. look $word > /dev/null # Don't want to display lines in dictionary file. lookup=$? # Exit status of 'look' command. if [ "$lookup" −eq 0 ] then echo "\"$word\" is valid." else echo "\"$word\" is invalid." fi # Data file from which to read words to test. Chapter 12. External Filters, Programs and Commands 180 Advanced Bash−Scripting Guide done <"$file" echo exit 0 # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Code below line will not execute because of "exit" command above. # Redirects stdin to $file, so "reads" come from there. # Stephane Chazelas proposes the following, more concise alternative: while read word && [[ $word != end ]] do if look "$word" > /dev/null then echo "\"$word\" is valid." else echo "\"$word\" is invalid." fi done <"$file" exit 0 sed, awk Scripting languages especially suited for parsing text files and command output. May be embedded singly or in combination in pipes and shell scripts. sed Non−interactive "stream editor", permits using many ex commands in batch mode. It finds many uses in shell scripts. awk Programmable file extractor and formatter, good for manipulating and/or extracting fields (columns) in structured text files. Its syntax is similar to C. wc wc gives a "word count" on a file or I/O stream: bash $ wc /usr/doc/sed−3.02/README 20 127 838 /usr/doc/sed−3.02/README [20 lines 127 words 838 characters] wc −w gives only the word count. wc −l gives only the line count. wc −c gives only the character count. wc −L gives only the length of the longest line. Using wc to count how many .txt files are in current working directory: $ ls *.txt | wc −l # Will work as long as none of the "*.txt" files have a linefeed in their name. # Alternative ways of doing this are: # find . −maxdepth 1 −name \*.txt −print0 | grep −cz . # (shopt −s nullglob; set −− *.txt; echo $#) # Thanks, S.C. Using wc to total up the size of all the files whose names begin with letters in the range d − h Chapter 12. External Filters, Programs and Commands 181 Advanced Bash−Scripting Guide bash$ wc [d−h]* | grep total | awk '{print $3}' 71832 Using wc to count the instances of the word "Linux" in the main source file for this book. bash$ grep Linux abs−book.sgml | wc −l 50 See also Example 12−33 and Example 16−7. Certain commands include some of the functionality of wc as options. ... | grep foo | wc −l # This frequently used construct can be more concisely rendered. ... | grep −c foo # Just use the "−c" (or "−−count") option of grep. # Thanks, S.C. tr character translation filter. Must use quoting and/or brackets, as appropriate. Quotes prevent the shell from reinterpreting the special characters in tr command sequences. Brackets should be quoted to prevent expansion by the shell. Either tr "A−Z" "*" $NEWFILENAME # Delete CR's and write to new file. echo "Original DOS text file is \"$1\"." echo "Converted UNIX text file is \"$NEWFILENAME\"." exit 0 # Exercise: # −−−−−−−− # Change the above script to convert from UNIX to DOS. Example 12−20. rot13: rot13, ultra−weak encryption. #!/bin/bash # rot13.sh: Classic rot13 algorithm, # encryption that might fool a 3−year old. # Usage: ./rot13.sh filename # or ./rot13.sh $TEMPFILE cpio −−make−directories −F $TEMPFILE −i rm −f $TEMPFILE exit 0 # Exercise: # Add check for whether 1) "target−file" exists and #+ 2) it is really an rpm archive. # Hint: parse output of 'file' command. Compression gzip The standard GNU/Unix compression utility, replacing the inferior and proprietary compress. The corresponding decompression command is gunzip, which is the equivalent of gzip −d. The zcat filter decompresses a gzipped file to stdout, as possible input to a pipe or redirection. This is, in effect, a cat command that works on compressed files (including files processed with the older compress utility). The zcat command is equivalent to gzip −dc. Chapter 12. External Filters, Programs and Commands 190 Advanced Bash−Scripting Guide On some commercial Unix systems, zcat is a synonym for uncompress −c, and will not work on gzipped files. See also Example 7−7. bzip2 An alternate compression utility, usually more efficient (but slower) than gzip, especially on large files. The corresponding decompression command is bunzip2. Newer versions of tar have been patched with bzip2 support. compress, uncompress This is an older, proprietary compression utility found in commercial Unix distributions. The more efficient gzip has largely replaced it. Linux distributions generally include a compress workalike for compatibility, although gunzip can unarchive files treated with compress. The znew command transforms compressed files into gzipped ones. sq Yet another compression utility, a filter that works only on sorted ASCII word lists. It uses the standard invocation syntax for a filter, sq < input−file > output−file. Fast, but not nearly as efficient as gzip. The corresponding uncompression filter is unsq, invoked like sq. The output of sq may be piped to gzip for further compression. zip, unzip Cross−platform file archiving and compression utility compatible with DOS pkzip.exe. "Zipped" archives seem to be a more acceptable medium of exchange on the Internet than "tarballs". unarc, unarj, unrar These Linux utilities permit unpacking archives compressed with the DOS arc.exe, arj.exe, and rar.exe programs. File Information file A utility for identifying file types. The command file file−name will return a file specification for file−name, such as ascii text or data. It references the magic numbers found in /usr/share/magic, /etc/magic, or /usr/lib/magic, depending on the Linux/Unix distribution. The −f option causes file to run in batch mode, to read from a designated file a list of filenames to analyze. The −z option, when used on a compressed target file, forces an attempt to analyze the uncompressed file type. bash$ file test.tar.gz test.tar.gz: gzip compressed data, deflated, last modified: Sun Sep 16 13:34:51 2001, os: bash file −z test.tar.gz test.tar.gz: GNU tar archive (gzip compressed data, deflated, last modified: Sun Sep 16 13 Example 12−27. Stripping comments from C program files Chapter 12. External Filters, Programs and Commands 191 Advanced Bash−Scripting Guide #!/bin/bash # strip−comment.sh: Strips out the comments (/* COMMENT */) in a C program. E_NOARGS=0 E_ARGERROR=66 E_WRONG_FILE_TYPE=67 if [ $# −eq "$E_NOARGS" ] then echo "Usage: `basename $0` C−program−file" >&2 # Error message to stderr. exit $E_ARGERROR fi # Test for correct file type. type=`file $1 | awk '{ print $2, $3, $4, $5 }'` # "file $1" echoes file type . . . # Then awk removes the first field of this, the filename . . . # Then the result is fed into the variable "type". correct_type="ASCII C program text" if [ "$type" != "$correct_type" ] then echo echo "This script works on C program files only." echo exit $E_WRONG_FILE_TYPE fi # Rather cryptic sed script: #−−−−−−−− sed ' /^\/\*/d /.*\/\*/d ' $1 #−−−−−−−− # Easy to understand if you take several hours to learn sed fundamentals. # Need to add one more line to the sed script to deal with #+ case where line of code has a comment following it on same line. # This is left as a non−trivial exercise. # Also, the above code deletes lines with a "*/" or "/*", #+ not a desirable result. exit 0 # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Code below this line will not execute because of 'exit 0' above. # Stephane Chazelas suggests the following alternative: usage() { echo "Usage: `basename $0` C−program−file" >&2 exit 1 } WEIRD=`echo −n −e '\377'` [[ $# −eq 1 ]] || usage case `file "$1"` in # or WEIRD=$'\377' Chapter 12. External Filters, Programs and Commands 192 Advanced Bash−Scripting Guide *"C program text"*) sed −e "s%/\*%${WEIRD}%g;s%\*/%${WEIRD}%g" "$1" \ | tr '\377\n' '\n\377' \ | sed −ne 'p;n' \ | tr −d '\n' | tr '\377' '\n';; *) usage;; esac # # # # # # #+ #+ This is still fooled by things like: printf("/*"); or /* /* buggy embedded comment */ To handle all special cases (comments in strings, comments in string where there is a \", \\" ...) the only way is to write a C parser (using lex or yacc perhaps?). exit 0 which which command−xxx gives the full path to "command−xxx". This is useful for finding out whether a particular command or utility is installed on the system. $bash which rm /usr/bin/rm whereis Similar to which, above, whereis command−xxx gives the full path to "command−xxx", but also to its manpage. $bash whereis rm rm: /bin/rm /usr/share/man/man1/rm.1.bz2 whatis whatis filexxx looks up "filexxx" in the whatis database. This is useful for identifying system commands and important configuration files. Consider it a simplified man command. $bash whatis whatis whatis (1) − search the whatis database for complete words Example 12−28. Exploring /usr/X11R6/bin #!/bin/bash # What are all those mysterious binaries in /usr/X11R6/bin? DIRECTORY="/usr/X11R6/bin" # Try also "/bin", "/usr/bin", "/usr/local/bin", etc. for file in $DIRECTORY/* do whatis `basename $file` done # Echoes info about the binary. exit 0 # You may wish to redirect output of this script, like so: Chapter 12. External Filters, Programs and Commands 193 Advanced Bash−Scripting Guide # ./what.sh >>whatis.db # or view it a page at a time on stdout, # ./what.sh | less See also Example 10−3. vdir Show a detailed directory listing. The effect is similar to ls −l. This is one of the GNU fileutils. bash$ vdir total 10 −rw−r−−r−− −rw−r−−r−− −rw−r−−r−− bash ls −l total 10 −rw−r−−r−− −rw−r−−r−− −rw−r−−r−− 1 bozo 1 bozo 1 bozo bozo bozo bozo 4034 Jul 18 22:04 data1.xrolo 4602 May 25 13:58 data1.xrolo.bak 877 Dec 17 2000 employment.xrolo 1 bozo 1 bozo 1 bozo bozo bozo bozo 4034 Jul 18 22:04 data1.xrolo 4602 May 25 13:58 data1.xrolo.bak 877 Dec 17 2000 employment.xrolo locate, slocate The locate command searches for files using a database stored for just that purpose. The slocate command is the secure version of locate (which may be aliased to slocate). $bash locate hickson /usr/lib/xephem/catalogs/hickson.edb readlink Disclose the file that a symbolic link points to. bash$ readlink /usr/bin/awk ../../bin/gawk strings Use the strings command to find printable strings in a binary or data file. It will list sequences of printable characters found in the target file. This might be handy for a quick 'n dirty examination of a core dump or for looking at an unknown graphic image file (strings image−file | more might show something like JFIF, which would identify the file as a jpeg graphic). In a script, you would probably parse the output of strings with grep or sed. See Example 10−7 and Example 10−9. Example 12−29. An "improved" strings command #!/bin/bash # wstrings.sh: "word−strings" (enhanced "strings" command) # # This script filters the output of "strings" by checking it #+ against a standard word list file. # This effectively eliminates gibberish and noise, #+ and outputs only recognized words. # ================================================================= # Standard Check for Script Argument(s) Chapter 12. External Filters, Programs and Commands 194 Advanced Bash−Scripting Guide ARGS=1 E_BADARGS=65 E_NOFILE=66 if [ $# −ne $ARGS ] then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ ! −f "$1" ] # Check if file exists. then echo "File \"$1\" does not exist." exit $E_NOFILE fi # ================================================================= MINSTRLEN=3 WORDFILE=/usr/share/dict/linux.words # # # #+ #+ Minimum string length. Dictionary file. May specify a different word list file of one−word−per−line format. wlist=`strings "$1" | tr A−Z a−z | tr '[:space:]' Z | \ tr −cs '[:alpha:]' Z | tr −s '\173−\377' Z | tr Z ' '` # Translate output of 'strings' command with multiple passes of 'tr'. # "tr A−Z a−z" converts to lowercase. # "tr '[:space:]'" converts whitespace characters to Z's. # "tr −cs '[:alpha:]' Z" converts non−alphabetic characters to Z's, #+ and squeezes multiple consecutive Z's. # "tr −s '\173−\377' Z" converts all characters past 'z' to Z's #+ and squeezes multiple consecutive Z's, #+ which gets rid of all the weird characters that the previous #+ translation failed to deal with. # Finally, "tr Z ' '" converts all those Z's to whitespace, #+ which will be seen as word separators in the loop below. # Note the technique of feeding the output of 'tr' back to itself, #+ but with different arguments and/or options on each pass. for word in $wlist # # # # Important: $wlist must not be quoted here. "$wlist" does not work. Why? do strlen=${#word} if [ "$strlen" −lt "$MINSTRLEN" ] then continue fi grep −Fw $word "$WORDFILE" ^^^ # String length. # Skip over short strings. # # Match whole words only. # "Fixed strings" and #+ "whole words" options. done Chapter 12. External Filters, Programs and Commands 195 Advanced Bash−Scripting Guide exit 0 Comparison diff, patch diff: flexible file comparison utility. It compares the target files line−by−line sequentially. In some applications, such as comparing word dictionaries, it may be helpful to filter the files through sort and uniq before piping them to diff. diff file−1 file−2 outputs the lines in the files that differ, with carets showing which file each particular line belongs to. The −−side−by−side option to diff outputs each compared file, line by line, in separate columns, with non−matching lines marked. The −c and −u options likewise make the output of the command easier to interpret. There are available various fancy frontends for diff, such as spiff, wdiff, xdiff, and mgdiff. The diff command returns an exit status of 0 if the compared files are identical, and 1 if they differ. This permits use of diff in a test construct within a shell script (see below). A common use for diff is generating difference files to be used with patch The −e option outputs files suitable for ed or ex scripts. patch: flexible versioning utility. Given a difference file generated by diff, patch can upgrade a previous version of a package to a newer version. It is much more convenient to distribute a relatively small "diff" file than the entire body of a newly revised package. Kernel "patches" have become the preferred method of distributing the frequent releases of the Linux kernel. patch −p1 /dev/null # /dev/null buries the output of the "cmp" command. # cmp −s $1 $2 has same result ("−s" silent flag to "cmp") # Thank you Anders Gustavsson for pointing this out. # # Also works with 'diff', i.e., diff $1 $2 &> /dev/null if [ $? −eq 0 ] # Test exit status of "cmp" command. then echo "File \"$1\" is identical to file \"$2\"." else echo "File \"$1\" differs from file \"$2\"." fi Chapter 12. External Filters, Programs and Commands 197 Advanced Bash−Scripting Guide exit 0 Use zcmp on gzipped files. comm Versatile file comparison utility. The files must be sorted for this to be useful. comm −options first−file second−file comm file−1 file−2 outputs three columns: ◊ column 1 = lines unique to file−1 ◊ column 2 = lines unique to file−2 ◊ column 3 = lines common to both. The options allow suppressing output of one or more columns. ◊ −1 suppresses column 1 ◊ −2 suppresses column 2 ◊ −3 suppresses column 3 ◊ −12 suppresses both columns 1 and 2, etc. Utilities basename Strips the path information from a file name, printing only the file name. The construction basename $0 lets the script know its name, that is, the name it was invoked by. This can be used for "usage" messages if, for example a script is called with missing arguments: echo "Usage: `basename $0` arg1 arg2 ... argn" dirname Strips the basename from a filename, printing only the path information. basename and dirname can operate on any arbitrary string. The argument does not need to refer to an existing file, or even be a filename for that matter (see Example A−8). Example 12−31. basename and dirname #!/bin/bash a=/home/bozo/daily−journal.txt echo echo echo echo echo "Basename of /home/bozo/daily−journal.txt = `basename $a`" "Dirname of /home/bozo/daily−journal.txt = `dirname $a`" "My own home is `basename ~/`." "The home of my home is `dirname ~/`." # Also works with just ~. # Also works with just ~. exit 0 split Chapter 12. External Filters, Programs and Commands 198 Advanced Bash−Scripting Guide Utility for splitting a file into smaller chunks. Usually used for splitting up large files in order to back them up on floppies or preparatory to e−mailing or uploading them. sum, cksum, md5sum These are utilities for generating checksums. A checksum is a number mathematically calculated from the contents of a file, for the purpose of checking its integrity. A script might refer to a list of checksums for security purposes, such as ensuring that the contents of key system files have not been altered or corrupted. For security applications, use the 128−bit md5sum (message digest checksum) command. bash$ cksum /boot/vmlinuz 1670054224 804083 /boot/vmlinuz bash$ md5sum /boot/vmlinuz 0f43eccea8f09e0a0b2b5cf1dcf333ba /boot/vmlinuz Note that cksum also shows the size, in bytes, of the target file. Example 12−32. Checking file integrity #!/bin/bash # file−integrity.sh: Checking whether files in a given directory # have been tampered with. E_DIR_NOMATCH=70 E_BAD_DBFILE=71 dbfile=File_record.md5 # Filename for storing records (database file). set_up_database () { echo ""$directory"" > "$dbfile" # Write directory name to first line of file. md5sum "$directory"/* >> "$dbfile" # Append md5 checksums and filenames. } check_database () { local n=0 local filename local checksum # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # # This file check should be unnecessary, #+ but better safe than sorry. if [ ! −r "$dbfile" ] then echo "Unable to read checksum database file!" exit $E_BAD_DBFILE fi # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Chapter 12. External Filters, Programs and Commands 199 Advanced Bash−Scripting Guide while read record[n] do directory_checked="${record[0]}" if [ "$directory_checked" != "$directory" ] then echo "Directories do not match up!" # Tried to use file for a different directory. exit $E_DIR_NOMATCH fi if [ "$n" −gt 0 ] # Not directory name. then filename[n]=$( echo ${record[$n]} | awk '{ print $2 }' ) # md5sum writes records backwards, #+ checksum first, then filename. checksum[n]=$( md5sum "${filename[n]}" ) if [ "${record[n]}" = "${checksum[n]}" ] then echo "${filename[n]} unchanged." elif [ "`basename ${filename[n]}`" != "$dbfile" ] # Skip over checksum database file, #+ as it will change with each invocation of script. # −−− # This unfortunately means that when running #+ this script on $PWD, tampering with the #+ checksum database file will not be detected. # Exercise: Fix this. then echo "${filename[n]} : CHECKSUM ERROR!" # File has been changed since last checked. fi fi let "n+=1" done <"$dbfile" } # Read from checksum database file. # =================================================== # # main () if [ −z "$1" ] then directory="$PWD" else directory="$1" fi # If not specified, #+ use current working directory. clear # Clear screen. echo " Running file integrity check on $directory" echo # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # if [ ! −r "$dbfile" ] # Need to create database file? then Chapter 12. External Filters, Programs and Commands 200 Advanced Bash−Scripting Guide echo "Setting up database file, \""$directory"/"$dbfile"\"."; echo set_up_database fi # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # check_database echo # You may wish to redirect the stdout of this script to a file, #+ especially if the directory checked has many files in it. exit 0 # For a much more thorough file integrity check, #+ consider the "Tripwire" package, #+ http://sourceforge.net/projects/tripwire/. # Do the actual work. See also Example A−20 for a creative use of the md5sum command. shred Securely erase a file by overwriting it multiple times with random bit patterns before deleting it. This command has the same effect as Example 12−48, but does it in a more thorough and elegant manner. This is one of the GNU fileutils. Advanced forensic technology may still be able to recover the contents of a file, even after application of shred. Encoding and Encryption uuencode This utility encodes binary files into ASCII characters, making them suitable for transmission in the body of an e−mail message or in a newsgroup posting. uudecode This reverses the encoding, decoding uuencoded files back into the original binaries. Example 12−33. Uudecoding encoded files #!/bin/bash lines=35 # Allow 35 lines for the header (very generous). for File in * # Test all the files in the current working directory... do search1=`head −$lines $File | grep begin | wc −w` search2=`tail −$lines $File | grep end | wc −w` # Uuencoded files have a "begin" near the beginning, #+ and an "end" near the end. if [ "$search1" −gt 0 ] then if [ "$search2" −gt 0 ] then echo "uudecoding − $File −" uudecode $File fi fi Chapter 12. External Filters, Programs and Commands 201 Advanced Bash−Scripting Guide done # Note that running this script upon itself fools it #+ into thinking it is a uuencoded file, #+ because it contains both "begin" and "end". # Exercise: # Modify this script to check for a newsgroup header. exit 0 The fold −s command may be useful (possibly in a pipe) to process long uudecoded text messages downloaded from Usenet newsgroups. mimencode, mmencode The mimencode and mmencode commands process multimedia−encoded e−mail attachments. Although mail user agents (such as pine or kmail) normally handle this automatically, these particular utilities permit manipulating such attachments manually from the command line or in a batch by means of a shell script. crypt At one time, this was the standard Unix file encryption utility. [31] Politically motivated government regulations prohibiting the export of encryption software resulted in the disappearance of crypt from much of the Unix world, and it is still missing from most Linux distributions. Fortunately, programmers have come up with a number of decent alternatives to it, among them the author's very own cruft (see Example A−5). Miscellaneous mktemp Create a temporary file with a "unique" filename. PREFIX=filename tempfile=`mktemp $PREFIX.XXXXXX` # ^^^^^^ Need at least 6 placeholders #+ in the filename template. echo "tempfile name = $tempfile" # tempfile name = filename.QA2ZpY # or something similar... make Utility for building and compiling binary packages. This can also be used for any set of operations that is triggered by incremental changes in source files. The make command checks a Makefile, a list of file dependencies and operations to be carried out. install Special purpose file copying command, similar to cp, but capable of setting permissions and attributes of the copied files. This command seems tailormade for installing software packages, and as such it shows up frequently in Makefiles (in the make install : section). It could likewise find use in installation scripts. dos2unix This utility, written by Benjamin Lin and collaborators, converts DOS−formatted text files (lines terminated by CR−LF) to Unix format (lines terminated by LF only), and vice−versa. ptx Chapter 12. External Filters, Programs and Commands 202 Advanced Bash−Scripting Guide The ptx [targetfile] command outputs a permuted index (cross−reference list) of the targetfile. This may be further filtered and formatted in a pipe, if necessary. more, less Pagers that display a text file or stream to stdout, one screenful at a time. These may be used to filter the output of a script. 12.6. Communications Commands Certain of the following commands find use in chasing spammers, as well as in network data transfer and analysis. Information and Statistics host Searches for information about an Internet host by name or IP address, using DNS. bash$ host surfacemail.com surfacemail.com. has address 202.92.42.236 ipcalc Displays IP information for a host. With the −h option, ipcalc does a reverse DNS lookup, finding the name of the host (server) from the IP address. bash$ ipcalc −h 202.92.42.236 HOSTNAME=surfacemail.com nslookup Do an Internet "name server lookup" on a host by IP address. This is essentially equivalent to ipcalc −h or dig −x . The command may be run either interactively or noninteractively, i.e., from within a script. The nslookup command has allegedly been "deprecated," but it still has its uses. bash$ nslookup −sil 66.97.104.180 nslookup kuhleersparnis.ch Server: 135.116.137.2 Address: 135.116.137.2#53 Non−authoritative answer: Name: kuhleersparnis.ch dig Similar to nslookup, do an Internet "name server lookup" on a host. May be run either interactively or noninteractively, i.e., from within a script. Compare the output of dig −x with ipcalc −h and nslookup. bash$ dig −x 81.9.6.2 ;; Got answer: ;; −>>HEADER<<− opcode: QUERY, status: NXDOMAIN, id: 11649 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: Chapter 12. External Filters, Programs and Commands 203 Advanced Bash−Scripting Guide ;2.6.9.81.in−addr.arpa. ;; AUTHORITY SECTION: 6.9.81.in−addr.arpa. 3600 2002031705 900 600 86400 3600 ;; ;; ;; ;; IN PTR IN SOA ns.eltel.net. noc.eltel.net. Query time: 537 msec SERVER: 135.116.137.2#53(135.116.137.2) WHEN: Wed Jun 26 08:35:24 2002 MSG SIZE rcvd: 91 traceroute Trace the route taken by packets sent to a remote host. This command works within a LAN, WAN, or over the Internet. The remote host may be specified by an IP address. The output of this command may be filtered by grep or sed in a pipe. bash$ traceroute 81.9.6.2 traceroute to 81.9.6.2 (81.9.6.2), 30 hops max, 38 byte packets 1 tc43.xjbnnbrb.com (136.30.178.8) 191.303 ms 179.400 ms 179.767 ms 2 or0.xjbnnbrb.com (136.30.178.1) 179.536 ms 179.534 ms 169.685 ms 3 192.168.11.101 (192.168.11.101) 189.471 ms 189.556 ms * ... ping Broadcast an "ICMP ECHO_REQUEST" packet to another machine, either on a local or remote network. This is a diagnostic tool for testing network connections, and it should be used with caution. A successful ping returns an exit status of 0. This can be tested for in a script. bash$ ping localhost PING localhost.localdomain (127.0.0.1) from 127.0.0.1 : 56(84) bytes of data. Warning: time of day goes back, taking countermeasures. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=0 ttl=255 time=709 usec 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=255 time=286 usec −−− localhost.localdomain ping statistics −−− 2 packets transmitted, 2 packets received, 0% packet loss round−trip min/avg/max/mdev = 0.286/0.497/0.709/0.212 ms whois Perform a DNS (Domain Name System) lookup. The −h option permits specifying which particular whois server to query. See Example 4−6. finger Retrieve information about users on a network. Optionally, this command can display a user's ~/.plan, ~/.project, and ~/.forward files, if present. bash$ finger Login Name bozo Bozo Bozeman bozo Bozo Bozeman bozo Bozo Bozeman Tty tty1 ttyp0 ttyp1 Idle 8 Login Time Office Jun 25 16:59 Jun 25 16:59 Jun 25 17:07 Office Phone bash$ finger bozo Login: bozo Directory: /home/bozo Name: Bozo Bozeman Shell: /bin/bash Chapter 12. External Filters, Programs and Commands 204 Advanced Bash−Scripting Guide Office: 2355 On since Fri On since Fri On since Fri On since Fri No mail. No Plan. Clown St., 543−1234 Aug 31 20:13 (MST) on Aug 31 20:13 (MST) on Aug 31 20:13 (MST) on Aug 31 20:31 (MST) on tty1 pts/0 pts/1 pts/2 1 hour 38 minutes idle 12 seconds idle 1 hour 16 minutes idle Out of security considerations, many networks disable finger and its associated daemon. [32] chfn Change information disclosed by the finger command. vrfy Verify an Internet e−mail address. Remote Host Access sx, rx The sx and rx command set serves to transfer files to and from a remote host using the xmodem protocol. These are generally part of a communications package, such as minicom. sz, rz The sz and rz command set serves to transfer files to and from a remote host using the zmodem protocol. Zmodem has certain advantages over xmodem, such as faster transmission rate and resumption of interrupted file transfers. Like sx and rx, these are generally part of a communications package. ftp Utility and protocol for uploading / downloading files to or from a remote host. An ftp session can be automated in a script (see Example 17−6, Example A−5, and Example A−14). uucp Unix to Unix copy. This is a communications package for transferring files between Unix servers. A shell script is an effective way to handle a uucp command sequence. Since the advent of the Internet and e−mail, uucp seems to have faded into obscurity, but it still exists and remains perfectly workable in situations where an Internet connection is not available or appropriate. cu Call Up a remote system and connect as a simple terminal. This command is part of the uucp package. It is a sort of dumbed−down version of telnet. telnet Utility and protocol for connecting to a remote host. The telnet protocol contains security holes and should therefore probably be avoided. wget The wget utility non−interactively retrieves or downloads files from a Web or ftp site. It works well in a script. wget −p http://www.xyz23.com/file01.html wget −r ftp://ftp.xyz24.net/~bozo/project_files/ −O $SAVEFILE Example 12−34. Getting a stock quote Chapter 12. External Filters, Programs and Commands 205 Advanced Bash−Scripting Guide #!/bin/bash # quote−fetch.sh: Download a stock quote. E_NOPARAMS=66 if [ −z "$1" ] # Must specify a stock (symbol) to fetch. then echo "Usage: `basename $0` stock−symbol" exit $E_NOPARAMS fi stock_symbol=$1 file_suffix=.html # Fetches an HTML file, so name it appropriately. URL='http://finance.yahoo.com/q?s=' # Yahoo finance board, with stock query suffix. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− wget −O ${stock_symbol}${file_suffix} "${URL}${stock_symbol}" # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− exit $? # Exercises: # −−−−−−−−− # # 1) Add a test to ensure the user running the script is on−line. # (Hint: parse the output of 'ps −ax' for "ppp" or "connect." # # 2) Modify this script to fetch the local weather report, #+ taking the user's zip code as an argument. lynx The lynx Web and file browser can be used inside a script (with the −dump option) to retrieve a file from a Web or ftp site non−interactively. lynx −dump http://www.xyz23.com/file01.html >$SAVEFILE rlogin Remote login, initates a session on a remote host. This command has security issues, so use ssh instead. rsh Remote shell, executes command(s) on a remote host. This has security issues, so use ssh instead. rcp Remote copy, copies files between two different networked machines. Using rcp and similar utilities with security implications in a shell script may not be advisable. Consider, instead, using ssh or an expect script. ssh Secure shell, logs onto a remote host and executes commands there. This secure replacement for telnet, rlogin, rcp, and rsh uses identity authentication and encryption. See its manpage for details. Local Network write This is a utility for terminal−to−terminal communication. It allows sending lines from your terminal (console or xterm) to that of another user. The mesg command may, of course, be used to disable Chapter 12. External Filters, Programs and Commands 206 Advanced Bash−Scripting Guide write access to a terminal Since write is interactive, it would not normally find use in a script. Mail mail Send or read e−mail messages. This stripped−down command−line mail client works fine as a command embedded in a script. Example 12−35. A script that mails itself #!/bin/sh # self−mailer.sh: Self−mailing script adr=${1:−`whoami`} # Default to current user, if not specified. # Typing 'self−mailer.sh wiseguy@superdupergenius.com' #+ sends this script to that addressee. # Just 'self−mailer.sh' (no argument) sends the script #+ to the person invoking it, for example, bozo@localhost.localdomain. # # For more on the ${parameter:−default} construct, #+ see the "Parameter Substitution" section #+ of the "Variables Revisited" chapter. # ============================================================================ cat $0 | mail −s "Script \"`basename $0`\" has mailed itself to you." "$adr" # ============================================================================ # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Greetings from the self−mailing script. # A mischievous person has run this script, #+ which has caused it to mail itself to you. # Apparently, some people have nothing better #+ to do with their time. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− echo "At `date`, script \"`basename $0`\" mailed to "$adr"." exit 0 mailto Similar to the mail command, mailto sends e−mail messages from the command line or in a script. However, mailto also permits sending MIME (multimedia) messages. vacation This utility automatically replies to e−mails that the intended recipient is on vacation and temporarily unavailable. This runs on a network, in conjunction with sendmail, and is not applicable to a dial−up POPmail account. 12.7. Terminal Control Commands Command affecting the console or terminal tput Chapter 12. External Filters, Programs and Commands 207 Advanced Bash−Scripting Guide Initialize terminal and/or fetch information about it from terminfo data. Various options permit certain terminal operations. tput clear is the equivalent of clear, below. tput reset is the equivalent of reset, below. tput sgr0 also resets the terminal, but without clearing the screen. bash$ tput longname xterm terminal emulator (XFree86 4.0 Window System) Issuing a tput cup X Y moves the cursor to the (X,Y) coordinates in the current terminal. A clear to erase the terminal screen would normally precede this. Note that stty offers a more powerful command set for controlling a terminal. infocmp This command prints out extensive information about the current terminal. It references the terminfo database. bash$ infocmp # Reconstructed via infocmp from file: /usr/share/terminfo/r/rxvt rxvt|rxvt terminal emulator (X Window System), am, bce, eo, km, mir, msgr, xenl, xon, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, ... reset Reset terminal parameters and clear text screen. As with clear, the cursor and prompt reappear in the upper lefthand corner of the terminal. clear The clear command simply clears the text screen at the console or in an xterm. The prompt and cursor reappear at the upper lefthand corner of the screen or xterm window. This command may be used either at the command line or in a script. See Example 10−25. script This utility records (saves to a file) all the user keystrokes at the command line in a console or an xterm window. This, in effect, creates a record of a session. 12.8. Math Commands "Doing the numbers" factor Decompose an integer into prime factors. bash$ factor 27417 27417: 3 13 19 37 bc Bash can't handle floating point calculations, and it lacks operators for certain important mathematical functions. Fortunately, bc comes to the rescue. Chapter 12. External Filters, Programs and Commands 208 Advanced Bash−Scripting Guide Not just a versatile, arbitrary precision calculation utility, bc offers many of the facilities of a programming language. bc has a syntax vaguely resembling C. Since it is a fairly well−behaved Unix utility, and may therefore be used in a pipe, bc comes in handy in scripts. Here is a simple template for using bc to calculate a script variable. This uses command substitution. variable=$(echo "OPTIONS; OPERATIONS" | bc) Example 12−36. Monthly Payment on a Mortgage #!/bin/bash # monthlypmt.sh: Calculates monthly payment on a mortgage. # This is a modification of code in the "mcalc" (mortgage calculator) package, #+ by Jeff Schmidt and Mendel Cooper (yours truly, the author of this document). # http://www.ibiblio.org/pub/Linux/apps/financial/mcalc−1.6.tar.gz [15k] echo echo "Given the principal, interest rate, and term of a mortgage," echo "calculate the monthly payment." bottom=1.0 echo echo read echo read echo read −n "Enter principal (no commas) " principal −n "Enter interest rate (percent) " interest_r −n "Enter term (months) " term # If 12%, enter "12", not ".12". interest_r=$(echo "scale=9; $interest_r/100.0" | bc) # Convert to decimal. # "scale" determines how many decimal places. interest_rate=$(echo "scale=9; $interest_r/12 + 1.0" | bc) top=$(echo "scale=9; $principal*$interest_rate^$term" | bc) echo; echo "Please be patient. This may take a while." let "months = $term − 1" # ==================================================================== for ((x=$months; x > 0; x−−)) do bot=$(echo "scale=9; $interest_rate^$x" | bc) bottom=$(echo "scale=9; $bottom+$bot" | bc) # bottom = $(($bottom + $bot")) done # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Chapter 12. External Filters, Programs and Commands 209 Advanced Bash−Scripting Guide # Rick Boivie pointed out a more efficient implementation #+ of the above loop, which decreases computation time by 2/3. # for ((x=1; x <= $months; x++)) # do # bottom=$(echo "scale=9; $bottom * $interest_rate + 1" | bc) # done # And then he came up with an even more efficient alternative, #+ one that cuts down the run time by about 95%! # bottom=`{ # echo "scale=9; bottom=$bottom; interest_rate=$interest_rate" # for ((x=1; x <= $months; x++)) # do # echo 'bottom = bottom * interest_rate + 1' # done # echo 'bottom' # } | bc` # Embeds a 'for loop' within command substitution. # ==================================================================== # let "payment = $top/$bottom" payment=$(echo "scale=2; $top/$bottom" | bc) # Use two decimal places for dollars and cents. echo echo "monthly payment = \$$payment" echo # Echo a dollar sign in front of amount. exit 0 # Exercises: # 1) Filter # 2) Filter # 3) If you # expand input to permit commas in principal amount. input to permit interest to be entered as percent or decimal. are really ambitious, this script to print complete amortization tables. Example 12−37. Base Conversion : ########################################################################## # Shellscript: base.sh − print number to different bases (Bourne Shell) # Author : Heiner Steven (heiner.steven@odn.de) # Date : 07−03−95 # Category : Desktop # $Id: base.sh,v 1.2 2000/02/06 19:55:35 heiner Exp $ ########################################################################## # Description # # Changes # 21−03−95 stv fixed error occuring with 0xb as input (0.2) ########################################################################## # ==> Used in this document with the script author's permission. # ==> Comments added by document author. NOARGS=65 Chapter 12. External Filters, Programs and Commands 210 Advanced Bash−Scripting Guide PN=`basename "$0"` VER=`echo '$Revision: 1.2 $' | cut −d' ' −f2` # Program name # ==> VER=1.2 Usage () { echo "$PN − print number to different bases, $VER (stv '95) usage: $PN [number ...] If no number is given, the numbers are read from standard input. A number may be binary (base 2) starting with 0b (i.e. 0b1100) octal (base 8) starting with 0 (i.e. 014) hexadecimal (base 16) starting with 0x (i.e. 0xc) decimal otherwise (i.e. 12)" >&2 exit $NOARGS } # ==> Function to print usage message. Msg () { for i # ==> in [list] missing. do echo "$PN: $i" >&2 done } Fatal () { Msg "$@"; exit 66; } PrintBases () { # Determine base of the number for i # ==> in [list] missing... do # ==> so operates on command line arg(s). case "$i" in 0b*) ibase=2;; # binary 0x*|[a−f]*|[A−F]*) ibase=16;; # hexadecimal 0*) ibase=8;; # octal [1−9]*) ibase=10;; # decimal *) Msg "illegal number $i − ignored" continue;; esac # Remove prefix, convert hex digits to uppercase (bc needs this) number=`echo "$i" | sed −e 's:^0[bBxX]::' | tr '[a−f]' '[A−F]'` # ==> Uses ":" as sed separator, rather than "/". # Convert number to decimal dec=`echo "ibase=$ibase; $number" | bc` case "$dec" in [0−9]*) ;; *) continue;; esac # ==> 'bc' is calculator utility. # number ok # error: ignore # Print all conversions in one line. # ==> 'here document' feeds command list to 'bc'. echo `bc < Is a "while loop" really necessary here, # ==>+ since all the cases either break out of the loop # ==>+ or terminate the script. # ==> (Thanks, Paulo Marcel Coelho Aragao.) do case "$1" in −−) shift; break;; −h) Usage;; # ==> Help message. −*) Usage;; *) break;; # first number esac # ==> More error checking for illegal input might be useful. shift done if [ $# −gt 0 ] then PrintBases "$@" else while read line do PrintBases $line done fi # read from stdin exit 0 An alternate method of invoking bc involves using a here document embedded within a command substitution block. This is especially appropriate when a script needs to pass a list of options and commands to bc. variable=`bc << LIMIT_STRING options statements operations LIMIT_STRING ` ...or... variable=$(bc << LIMIT_STRING options statements operations LIMIT_STRING ) Example 12−38. Invoking bc using a "here document" #!/bin/bash # Invoking 'bc' using command substitution # in combination with a 'here document'. var1=`bc << EOF 18.33 * 19.78 Chapter 12. External Filters, Programs and Commands 212 Advanced Bash−Scripting Guide EOF ` echo $var1 # 362.56 # $( ... ) notation also works. v1=23.53 v2=17.881 v3=83.501 v4=171.63 var2=$(bc << EOF scale = 4 a = ( $v1 + $v2 ) b = ( $v3 * $v4 ) a * b + 15.35 EOF ) echo $var2 # 593487.8452 var3=$(bc −l << EOF scale = 9 s ( 1.7 ) EOF ) # Returns the sine of 1.7 radians. # The "−l" option calls the 'bc' math library. echo $var3 # .991664810 # Now, try it in a function... hyp= # Declare global variable. hypotenuse () # Calculate hypotenuse of a right triangle. { hyp=$(bc −l << EOF scale = 9 sqrt ( $1 * $1 + $2 * $2 ) EOF ) # Unfortunately, can't return floating point values from a Bash function. } hypotenuse 3.68 7.31 echo "hypotenuse = $hyp" # 8.184039344 exit 0 Example 12−39. Calculating PI #!/bin/bash # cannon.sh: Approximating PI by firing cannonballs. # This is a very simple instance of a "Monte Carlo" simulation, #+ a mathematical model of a real−life event, #+ using pseudorandom numbers to emulate random chance. # # Consider a perfectly square plot of land, 10000 units on a side. This land has a perfectly circular lake in its center, Chapter 12. External Filters, Programs and Commands 213 Advanced Bash−Scripting Guide #+ # # # # #+ # #+ # #+ # #+ # # #+ #+ # # #+ #+ # # # # #+ # with a diameter of 10000 units. The plot is actually all water, except for the four corners. (Think of it as a square with an inscribed circle.) Let us fire iron cannonballs from an old−style cannon at the square of land. All the shots impact somewhere on the plot of land, either in the lake or on the dry corners. Since the lake takes up most of the land area, most of the shots will SPLASH! into the water. Just a few shots will THUD! into solid ground in the four corners of the land. If we take enough random, unaimed shots at the plot of land, Then the ratio of SPLASHES to total shots will approximate the value of PI/4. The reason for this is that the cannon is actually shooting only at the upper right−hand quadrant of the square, i.e., Quadrant I of the Cartesian coordinate plane. (The previous explanation was a simplification.) Theoretically, the more shots taken, the better the fit. However, a shell script, as opposed to a compiled language with floating−point math built in, requires a few compromises. This tends to lower the accuracy of the simulation, unfortunately. DIMENSION=10000 # Length of each side of the plot of land. # Also sets ceiling for random integers generated. # Fire this many shots. # 10000 or more would be better, but would take too long. # Scaling factor to approximate PI. MAXSHOTS=1000 PMULTIPLIER=4.0 get_random () { SEED=$(head −1 /dev/urandom | od −N 1 | awk '{ print $2 }') RANDOM=$SEED # From "seeding−random.sh" #+ example script. let "rnum = $RANDOM % $DIMENSION" # Range less than 10000. echo $rnum } distance= # Declare global variable. hypotenuse () # Calculate hypotenuse of a right triangle. { # From "alt−bc.sh" example. distance=$(bc −l << EOF scale = 0 sqrt ( $1 * $1 + $2 * $2 ) EOF ) # Setting "scale" to zero rounds down result to integer value, #+ a necessary compromise in this script. # This diminshes the accuracy of the simulation, unfortunately. } # main() { # Initialize variables. shots=0 Chapter 12. External Filters, Programs and Commands 214 Advanced Bash−Scripting Guide splashes=0 thuds=0 Pi=0 while [ "$shots" −lt do "$MAXSHOTS" ] # Main loop. xCoord=$(get_random) yCoord=$(get_random) hypotenuse $xCoord $yCoord ((shots++)) printf printf printf printf "#%4d " $shots "Xc = %4d " $xCoord "Yc = %4d " $yCoord "Distance = %5d " $distance # Get random X and Y coords. # Hypotenuse of right−triangle = #+ distance. # #+ # #+ Distance from center of lake, the "origin," coordinate (0,0). if [ "$distance" −le "$DIMENSION" ] then echo −n "SPLASH! " ((splashes++)) else echo −n "THUD! " ((thuds++)) fi Pi=$(echo "scale=9; $PMULTIPLIER*$splashes/$shots" | bc) # Multiply ratio by 4.0. echo −n "PI ~ $Pi" echo done echo echo "After $shots shots, PI looks like approximately $Pi." # Tends to run a bit high . . . # Probably due to round−off error and imperfect randomness of $RANDOM. echo #} exit 0 # #+ # # # # #+ One might well wonder whether a shell script is appropriate for an application as complex and computation−intensive as a simulation. There 1) As 2) To it are at least two justifications. a proof of concept: to show it can be done. prototype and test the algorithms before rewriting in a compiled high−level language. dc The dc (desk calculator) utility is stack−oriented and uses RPN ("Reverse Polish Notation"). Like bc, it has much of the power of a programming language. Most persons avoid dc, since it requires non−intuitive RPN input. Yet it has its uses. Chapter 12. External Filters, Programs and Commands 215 Advanced Bash−Scripting Guide Example 12−40. Converting a decimal number to hexadecimal #!/bin/bash # hexconvert.sh: Convert a decimal number to hexadecimal. BASE=16 # Hexadecimal. if [ −z "$1" ] then echo "Usage: $0 number" exit $E_NOARGS # Need a command line argument. fi # Exercise: add argument validity checking. hexcvt () { if [ −z "$1" ] then echo 0 return # "Return" 0 if no arg passed to function. fi echo ""$1" "$BASE" o p" | dc # "o" sets radix (numerical base) of output. # "p" prints the top of stack. # See 'man dc' for other options. return } hexcvt "$1" exit 0 Studying the info page for dc gives some insight into its intricacies. However, there seems to be a small, select group of dc wizards who delight in showing off their mastery of this powerful, but arcane utility. Example 12−41. Factoring #!/bin/bash # factr.sh: Factor a number MIN=2 # Will not work for number smaller than this. E_NOARGS=65 E_TOOSMALL=66 if [ −z $1 ] then echo "Usage: $0 number" exit $E_NOARGS fi if [ "$1" −lt "$MIN" ] then echo "Number to factor must be $MIN or greater." exit $E_TOOSMALL fi Chapter 12. External Filters, Programs and Commands 216 Advanced Bash−Scripting Guide # Exercise: Add type checking (to reject non−integer arg). echo "Factors of $1:" # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− echo "$1[p]s2[lip/dli%0=1dvsr]s12sid2%0=13sidvsr[dli%0=1lrli2+dsi!>.]ds.xd1<2" | dc # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Above line of code written by Michel Charpentier . # Used with permission (thanks). exit 0 awk Yet another way of doing floating point math in a script is using awk's built−in math functions in a shell wrapper. Example 12−42. Calculating the hypotenuse of a triangle #!/bin/bash # hypotenuse.sh: Returns the "hypotenuse" of a right triangle. # ( square root of sum of squares of the "legs") ARGS=2 E_BADARGS=65 # Script needs sides of triangle passed. # Wrong number of arguments. if [ $# −ne "$ARGS" ] # Test number of arguments to script. then echo "Usage: `basename $0` side_1 side_2" exit $E_BADARGS fi AWKSCRIPT=' { printf( "%3.7f\n", sqrt($1*$1 + $2*$2) ) } ' # command(s) / parameters passed to awk echo −n "Hypotenuse of $1 and $2 = " echo $1 $2 | awk "$AWKSCRIPT" exit 0 12.9. Miscellaneous Commands Command that fit in no special category jot, seq These utilities emit a sequence of integers, with a user−selected increment. The normal separator character between each integer is a newline, but this can be changed with the −s option. bash$ seq 5 1 2 3 4 5 Chapter 12. External Filters, Programs and Commands 217 Advanced Bash−Scripting Guide bash$ seq −s : 5 1:2:3:4:5 Both jot and seq come in handy in a for loop. Example 12−43. Using seq to generate loop arguments #!/bin/bash # Using "seq" echo for a in `seq 80` # or for a in $( seq 80 ) # Same as for a in 1 2 3 4 5 ... 80 (saves much typing!). # May also use 'jot' (if present on system). do echo −n "$a " done # 1 2 3 4 5 ... 80 # Example of using the output of a command to generate # the [list] in a "for" loop. echo; echo COUNT=80 # Yes, 'seq' may also take a replaceable parameter. for a in $( seq $COUNT ) for a in `seq $COUNT` # or do echo −n "$a " done # 1 2 3 4 5 ... 80 echo; echo BEGIN=75 END=80 for a in `seq $BEGIN $END` # Giving "seq" two arguments starts the count at the first one, #+ and continues until it reaches the second. do echo −n "$a " done # 75 76 77 78 79 80 echo; echo BEGIN=45 INTERVAL=5 END=80 for a in `seq $BEGIN $INTERVAL $END` # Giving "seq" three arguments starts the count at the first one, #+ uses the second for a step interval, #+ and continues until it reaches the third. do echo −n "$a " Chapter 12. External Filters, Programs and Commands 218 Advanced Bash−Scripting Guide done # 45 50 55 60 65 70 75 80 echo; echo exit 0 getopt The getopt command parses command−line options preceded by a dash. This external command corresponds to the getopts Bash builtin. The getopt permits handling long options by use of the −l flag, and it also allows parameter reshuffling. Example 12−44. Using getopt to parse command−line options #!/bin/bash # Using getopt. # Try the following when invoking this script: # sh ex33a.sh −a # sh ex33a.sh −abc # sh ex33a.sh −a −b −c # sh ex33a.sh −d # sh ex33a.sh −dXYZ # sh ex33a.sh −d XYZ # sh ex33a.sh −abcd # sh ex33a.sh −abcdZ # sh ex33a.sh −z # sh ex33a.sh a # Explain the results of each of the above. E_OPTERR=65 if [ "$#" −eq 0 ] then # Script needs at least one command−line argument. echo "Usage $0 −[options a,b,c]" exit $E_OPTERR fi set −− `getopt "abcd:" "$@"` # Sets positional parameters to command−line arguments. # What happens if you use "$*" instead of "$@"? while [ ! −z "$1" ] do case "$1" in −a) echo "Option −b) echo "Option −c) echo "Option −d) echo "Option *) break;; esac shift done # It is usually better to use the 'getopts' builtin in a script, #+ rather than 'getopt'. # See "ex33.sh". exit 0 \"a\"";; \"b\"";; \"c\"";; \"d\" $2";; run−parts Chapter 12. External Filters, Programs and Commands 219 Advanced Bash−Scripting Guide The run−parts command [33] executes all the scripts in a target directory, sequentially in ASCII−sorted filename order. Of course, the scripts need to have execute permission. The cron daemon invokes run−parts to run the scripts in the /etc/cron.* directories. yes In its default behavior the yes command feeds a continuous string of the character y followed by a line feed to stdout. A control−c terminates the run. A different output string may be specified, as in yes different string, which would continually output different string to stdout. One might well ask the purpose of this. From the command line or in a script, the output of yes can be redirected or piped into a program expecting user input. In effect, this becomes a sort of poor man's version of expect. yes | fsck /dev/hda1 runs fsck non−interactively (careful!). yes | rm −r dirname has same effect as rm −rf dirname (careful!). Caution advised when piping yes to a potentially dangerous system command, such as fsck or fdisk. It may have unintended side−effects. banner Prints arguments as a large vertical banner to stdout, using an ASCII character (default '#'). This may be redirected to a printer for hardcopy. printenv Show all the environmental variables set for a particular user. bash$ printenv | grep HOME HOME=/home/bozo lp The lp and lpr commands send file(s) to the print queue, to be printed as hard copy. [34] These commands trace the origin of their names to the line printers of another era. bash$ lp file1.txt or bash lp to file | ===============|=============== command−−−>−−−−|−operator−−>−−−> result of command(s) =============================== cat listfile* | sort | tee check.file | uniq > result.file (The file check.file contains the concatenated sorted "listfiles", before the duplicate lines are removed by uniq.) mkfifo This obscure command creates a named pipe, a temporary first−in−first−out buffer for transferring data between processes. [35] Typically, one process writes to the FIFO, and the other reads from it. See Example A−16. pathchk This command checks the validity of a filename. If the filename exceeds the maximum allowable length (255 characters) or one or more of the directories in its path is not searchable, then an error message results. Unfortunately, pathchk does not return a recognizable error code, and it is therefore pretty much useless in a script. Consider instead the file test operators. dd This is the somewhat obscure and much feared "data duplicator" command. Originally a utility for exchanging data on magnetic tapes between Unix minicomputers and IBM mainframes, this command still has its uses. The dd command simply copies a file (or stdin/stdout), but with conversions. Possible conversions are ASCII/EBCDIC, [36] upper/lower case, swapping of byte pairs between input and output, and skipping and/or truncating the head or tail of the input file. A dd −−help lists the conversion and other options that this powerful utility takes. Example 12−45. A script that copies itself #!/bin/bash # self−copy.sh # This script copies itself. file_subscript=copy dd if=$0 of=$0.$file_subscript 2>/dev/null # Suppress messages from dd: ^^^^^^^^^^^ exit $? Example 12−46. Exercising dd #!/bin/bash # exercising−dd.sh Chapter 12. External Filters, Programs and Commands 221 Advanced Bash−Scripting Guide # Script by Stephane Chazelas. # Somewhat modified by document author. input_file=$0 # This script. output_file=log.txt n=3 p=5 dd if=$input_file of=$output_file bs=1 skip=$((n−1)) count=$((p−n+1)) 2> /dev/null # Extracts characters n to p from this script. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− echo −n "hello world" | dd cbs=1 conv=unblock 2> /dev/null # Echoes "hello world" vertically. exit 0 To demonstrate just how versatile dd is, let's use it to capture keystrokes. Example 12−47. Capturing Keystrokes #!/bin/bash # Capture keystrokes without needing to press ENTER. keypresses=4 # Number of keypresses to capture. old_tty_setting=$(stty −g) echo "Press $keypresses keys." stty −icanon −echo # Save old terminal settings. # Disable canonical mode. # Disable local echo. keys=$(dd bs=1 count=$keypresses 2> /dev/null) # 'dd' uses stdin, if "if" not specified. stty "$old_tty_setting" # Restore old terminal settings. echo "You pressed the \"$keys\" keys." # Thanks, S.C. for showing the way. exit 0 The dd command can do random access on a data stream. echo −n . | dd bs=1 seek=4 of=file conv=notrunc # The "conv=notrunc" option means that the output file will not be truncated. # Thanks, S.C. The dd command can copy raw data and disk images to and from devices, such as floppies and tape drives (Example A−6). A common use is creating boot floppies. dd if=kernel−image of=/dev/fd0H1440 Chapter 12. External Filters, Programs and Commands 222 Advanced Bash−Scripting Guide Similarly, dd can copy the entire contents of a floppy, even one formatted with a "foreign" OS, to the hard drive as an image file. dd if=/dev/fd0 of=/home/bozo/projects/floppy.img Other applications of dd include initializing temporary swap files (Example 29−2) and ramdisks (Example 29−3). It can even do a low−level copy of an entire hard drive partition, although this is not necessarily recommended. People (with presumably nothing better to do with their time) are constantly thinking of interesting applications of dd. Example 12−48. Securely deleting a file #!/bin/bash # blot−out.sh: Erase all traces of a file. # #+ # #+ This script overwrites a target file alternately with random bytes, then zeros before finally deleting it. After that, even examining the raw disk sectors will not reveal the original file data. # # #+ # #+ # Number of file−shredding passes. Increasing this slows script execution, especially on large target files. I/O with /dev/urandom requires unit block size, otherwise you get weird results. Various error exit codes. PASSES=7 BLOCKSIZE=1 E_BADARGS=70 E_NOT_FOUND=71 E_CHANGED_MIND=72 if [ −z "$1" ] # No filename specified. then echo "Usage: `basename $0` filename" exit $E_BADARGS fi file=$1 if [ ! −e "$file" ] then echo "File \"$file\" not found." exit $E_NOT_FOUND fi echo; echo −n "Are you absolutely sure you want to blot out \"$file\" (y/n)? " read answer case "$answer" in [nN]) echo "Changed your mind, huh?" exit $E_CHANGED_MIND ;; *) echo "Blotting out file \"$file\".";; esac flength=$(ls −l "$file" | awk '{print $5}') pass_count=1 # Field 5 is file length. Chapter 12. External Filters, Programs and Commands 223 Advanced Bash−Scripting Guide chmod u+w "$file" echo while [ "$pass_count" −le "$PASSES" ] do echo "Pass #$pass_count" sync # Flush buffers. dd if=/dev/urandom of=$file bs=$BLOCKSIZE count=$flength # Fill with random bytes. sync # Flush buffers again. dd if=/dev/zero of=$file bs=$BLOCKSIZE count=$flength # Fill with zeros. sync # Flush buffers yet again. let "pass_count += 1" echo done # Allow overwriting/deleting the file. rm −f $file sync # Finally, delete scrambled and shredded file. # Flush buffers a final time. echo "File \"$file\" blotted out and deleted."; echo exit 0 # #+ # #+ This is a fairly secure, if inefficient and slow method of thoroughly "shredding" a file. The "shred" command, part of the GNU "fileutils" package, does the same thing, although more efficiently. # The file cannot not be "undeleted" or retrieved by normal methods. # However . . . #+ this simple method would *not* likely withstand forensic analysis. # Tom Vier's "wipe" file−deletion package does a much more thorough job #+ of file shredding than this simple script. # http://www.ibiblio.org/pub/Linux/utils/file/wipe−2.0.0.tar.bz2 # For an in−depth analysis on the topic of file deletion and security, #+ see Peter Gutmann's paper, #+ "Secure Deletion of Data From Magnetic and Solid−State Memory". # http://www.cs.auckland.ac.nz/~pgut001/pubs/secure_del.html od The od, or octal dump filter converts input (or files) to octal (base−8) or other bases. This is useful for viewing or processing binary data files or otherwise unreadable system device files, such as /dev/urandom, and as a filter for binary data. See Example 9−27 and Example 12−13. hexdump Performs a hexadecimal, octal, decimal, or ASCII dump of a binary file. This command is the rough equivalent of od, above, but not nearly as useful. objdump Displays information about an object file or binary executable in either hexadecimal form or as a disassembled listing (with the −d option). bash$ objdump −d /bin/ls /bin/ls: file format elf32−i386 Chapter 12. External Filters, Programs and Commands 224 Advanced Bash−Scripting Guide Disassembly of section .init: 080490bc <.init>: 80490bc: 55 80490bd: 89 e5 ... push mov %ebp %esp,%ebp mcookie This command generates a "magic cookie", a 128−bit (32−character) pseudorandom hexadecimal number, normally used as an authorization "signature" by the X server. This also available for use in a script as a "quick 'n dirty" random number. random000=$(mcookie) Of course, a script could use md5 for the same purpose. # Generate md5 checksum on the script itself. random001=`md5sum $0 | awk '{print $1}'` # Uses 'awk' to strip off the filename. The mcookie command gives yet another way to generate a "unique" filename. Example 12−49. Filename generator #!/bin/bash # tempfile−name.sh: BASE_STR=`mcookie` POS=11 LEN=5 prefix=temp temp filename generator # 32−character magic cookie. # Arbitrary position in magic cookie string. # Get $LEN consecutive characters. # This is, after all, a "temp" file. # For more "uniqueness," generate the filename prefix #+ using the same method as the suffix, below. suffix=${BASE_STR:POS:LEN} # Extract a 5−character string, starting at position 11. temp_filename=$prefix.$suffix # Construct the filename. echo "Temp filename = "$temp_filename"" # sh tempfile−name.sh # Temp filename = temp.e19ea exit 0 units This utility converts between different units of measure. While normally invoked in interactive mode, units may find use in a script. Example 12−50. Converting meters to miles #!/bin/bash Chapter 12. External Filters, Programs and Commands 225 Advanced Bash−Scripting Guide # unit−conversion.sh convert_units () # Takes as arguments the units to convert. { cf=$(units "$1" "$2" | sed −−silent −e '1p' | awk '{print $2}') # Strip off everything except the actual conversion factor. echo "$cf" } Unit1=miles Unit2=meters cfactor=`convert_units $Unit1 $Unit2` quantity=3.73 result=$(echo $quantity*$cfactor | bc) echo "There are $result $Unit2 in $quantity $Unit1." # What happens if you pass incompatible units, #+ such as "acres" and "miles" to the function? exit 0 m4 A hidden treasure, m4 is a powerful macro processing filter, [37] virtually a complete language. Although originally written as a pre−processor for RatFor, m4 turned out to be useful as a stand−alone utility. In fact, m4 combines some of the functionality of eval, tr, and awk, in addition to its extensive macro expansion facilities. The April, 2002 issue of Linux Journal has a very nice article on m4 and its uses. Example 12−51. Using m4 #!/bin/bash # m4.sh: Using the m4 macro processor # Strings string=abcdA01 echo "len($string)" | m4 echo "substr($string,4)" | m4 echo "regexp($string,[0−1][0−1],\&Z)" | m4 # Arithmetic echo "incr(22)" | m4 echo "eval(99 / 3)" | m4 exit 0 #7 # A01 # 01Z # 23 # 33 doexec The doexec command enables passing an arbitrary list of arguments to a binary executable. In particular, passing argv[0] (which corresponds to $0 in a script) lets the executable be invoked by various names, and it can then carry out different sets of actions, according to the name by which it was called. What this amounts to is roundabout way of passing options to an executable. For example, the /usr/local/bin directory might contain a binary called "aaa". Invoking doexec /usr/local/bin/aaa list would list all those files in the current working directory beginning with an "a", while invoking (the same executable with) doexec /usr/local/bin/aaa delete would delete those files. Chapter 12. External Filters, Programs and Commands 226 Advanced Bash−Scripting Guide The various behaviors of the executable must be defined within the code of the executable itself, analogous to something like the following in a shell script: case `basename $0` in "name1" ) do_something;; "name2" ) do_something_else;; "name3" ) do_yet_another_thing;; * ) bail_out;; esac dialog The dialog family of tools provide a method of calling interactive "dialog" boxes from a script. The more elaborate variations of dialog −− gdialog, Xdialog, and kdialog −− actually invoke X−Windows widgets. See Example 34−15. sox The sox, or "sound exchange" command plays and performs transformations on sound files. For example, sox soundfile.wav soundfile.au changes a WAV sound file into a (Sun audio format) AU sound file. Shell scripts are ideally suited for batch processing sox operations on sound files. Chapter 12. External Filters, Programs and Commands 227 Chapter 13. System and Administrative Commands The startup and shutdown scripts in /etc/rc.d illustrate the uses (and usefulness) of many of these comands. These are usually invoked by root and used for system maintenance or emergency filesystem repairs. Use with caution, as some of these commands may damage your system if misused. Users and Groups users Show all logged on users. This is the approximate equivalent of who −q. groups Lists the current user and the groups she belongs to. This corresponds to the $GROUPS internal variable, but gives the group names, rather than the numbers. bash$ groups bozita cdrom cdwriter audio xgrp bash$ echo $GROUPS 501 chown, chgrp The chown command changes the ownership of a file or files. This command is a useful method that root can use to shift file ownership from one user to another. An ordinary user may not change the ownership of files, not even her own files. [38] root# chown bozo *.txt The chgrp command changes the group ownership of a file or files. You must be owner of the file(s) as well as a member of the destination group (or root) to use this operation. chgrp −−recursive dunderheads *.data # The "dunderheads" group will now own all the "*.data" files #+ all the way down the $PWD directory tree (that's what "recursive" means). useradd, userdel The useradd administrative command adds a user account to the system and creates a home directory for that particular user, if so specified. The corresponding userdel command removes a user account from the system [39] and deletes associated files. The adduser command is a synonym for useradd and is usually a symbolic link to it. usermod Modify a user account. Changes may be made to the password, group membership, expiration date, and other attributes of a given user's account. With this command, a user's password may be locked, which has the effect of disabling the account. groupmod Modify a given group. The group name and/or ID number may be changed using this command. id The id command lists the real and effective user IDs and the group IDs of the user associated with the current process. This is the counterpart to the $UID, $EUID, and $GROUPS internal Bash variables. bash$ id Chapter 13. System and Administrative Commands 228 Advanced Bash−Scripting Guide uid=501(bozo) gid=501(bozo) groups=501(bozo),22(cdrom),80(cdwriter),81(audio) bash$ echo $UID 501 The id command shows the effective IDs only when they differ from the real ones. Also see Example 9−5. who Show all users logged on to the system. bash$ who bozo tty1 bozo pts/0 bozo pts/1 bozo pts/2 Apr 27 17:45 Apr 27 17:46 Apr 27 17:47 Apr 27 17:49 The −m gives detailed information about only the current user. Passing any two arguments to who is the equivalent of who −m, as in who am i or who The Man. bash$ who −m localhost.localdomain!bozo pts/2 Apr 27 17:49 whoami is similar to who −m, but only lists the user name. bash$ whoami bozo w Show all logged on users and the processes belonging to them. This is an extended version of who. The output of w may be piped to grep to find a specific user and/or process. bash$ w | grep startx bozo tty1 − 4:22pm 6:41 4.47s 0.45s startx logname Show current user's login name (as found in /var/run/utmp). This is a near−equivalent to whoami, above. bash$ logname bozo bash$ whoami bozo However... bash$ su Password: ...... bash# whoami root bash# logname Chapter 13. System and Administrative Commands 229 Advanced Bash−Scripting Guide bozo While logname prints the name of the logged in user, whoami gives the name of the user attached to the current process. As we have just seen, sometimes these are not the same. su Runs a program or script as a substitute user. su rjones starts a shell as user rjones. A naked su defaults to root. See Example A−16. sudo Runs a command as root (or another user). This may be used in a script, thus permitting a regular user to run the script. #!/bin/bash # Some commands. sudo cp /root/secretfile /home/bozo/secret # Some more commands. The file /etc/sudoers holds the names of users permitted to invoke sudo. passwd Sets, changes, or manages a user's password. The passwd command can be used in a script, but should not be. Example 13−1. Setting a new password #!/bin/bash # setnew−password.sh: For demonstration purposes only. # Not a good idea to actually run this script. # This script must be run as root. ROOT_UID=0 E_WRONG_USER=65 E_NOSUCHUSER=70 SUCCESS=0 # Root has $UID 0. # Not root? if [ "$UID" −ne "$ROOT_UID" ] then echo; echo "Only root can run this script."; echo exit $E_WRONG_USER else echo echo "You should know better than to run this script, root." echo "Even root users get the blues... " echo fi username=bozo NEWPASSWORD=security_violation # Check if bozo lives here. grep −q "$username" /etc/passwd if [ $? −ne $SUCCESS ] Chapter 13. System and Administrative Commands 230 Advanced Bash−Scripting Guide then echo "User $username does not exist." echo "No password changed." exit $E_NOSUCHUSER fi echo "$NEWPASSWORD" | passwd −−stdin "$username" # The '−−stdin' option to 'passwd' permits #+ getting a new password from stdin (or a pipe). echo; echo "User $username's password changed!" # Using the 'passwd' command in a script is dangerous. exit 0 The passwd command's −l, −u, and −d options permit locking, unlocking, and deleting a user's password. Only root may use these options. ac Show users' logged in time, as read from /var/log/wtmp. This is one of the GNU accounting utilities. bash$ ac total 68.08 last List last logged in users, as read from /var/log/wtmp. This command can also show remote logins. newgrp Change user's group ID without logging out. This permits access to the new group's files. Since users may be members of multiple groups simultaneously, this command finds little use. Terminals tty Echoes the name of the current user's terminal. Note that each separate xterm window counts as a different terminal. bash$ tty /dev/pts/1 stty Shows and/or changes terminal settings. This complex command, used in a script, can control terminal behavior and the way output displays. See the info page, and study it carefully. Example 13−2. Setting an erase character #!/bin/bash # erase.sh: Using "stty" to set an erase character when reading input. echo −n "What is your name? " read name # Try to backspace #+ to erase characters of input. # Problems? echo "Your name is $name." Chapter 13. System and Administrative Commands 231 Advanced Bash−Scripting Guide stty echo read echo erase '#' −n "What is your name? " name "Your name is $name." # # Set "hashmark" (#) as erase character. Use # to erase last character typed. # Warning: Even after the script exits, the new key value remains set. exit 0 Example 13−3. secret password: Turning off terminal echoing #!/bin/bash echo echo read echo echo echo −n "Enter password " passwd "password is $passwd" −n "If someone had been looking over your shoulder, " "your password would have been compromised." # Two line−feeds in an "and list". # Turns off screen echo. echo && echo stty −echo echo −n "Enter password again " read passwd echo echo "password is $passwd" echo stty echo exit 0 # Restores screen echo. A creative use of stty is detecting a user keypress (without hitting ENTER). Example 13−4. Keypress detection #!/bin/bash # keypress.sh: Detect a user keypress ("hot keyboard"). echo old_tty_settings=$(stty −g) stty −icanon Keypress=$(head −c1) # Save old settings. # or $(dd bs=1 count=1 2> /dev/null) # on non−GNU systems echo echo "Key pressed was \""$Keypress"\"." echo stty "$old_tty_settings" # Thanks, Stephane Chazelas. exit 0 # Restore old settings. Chapter 13. System and Administrative Commands 232 Advanced Bash−Scripting Guide Also see Example 9−3. terminals and modes Normally, a terminal works in the canonical mode. When a user hits a key, the resulting character does not immediately go to the program actually running in this terminal. A buffer local to the terminal stores keystrokes. When the user hits the ENTER key, this sends all the stored keystrokes to the program running. There is even a basic line editor inside the terminal. bash$ stty −a speed 9600 baud; rows 36; columns 96; line = 0; intr = ^C; quit = ^\; erase = ^H; kill = ^U; eof = ^D; eol = ; eol2 = ; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; ... isig icanon iexten echo echoe echok −echonl −noflsh −xcase −tostop −echoprt Using canonical mode, it is possible to redefine the special keys for the local terminal line editor. bash$ cat > filexxx whaIfoo barhello world bash$ cat filexxx hello world bash$ bash$ wc −c < file 13 The process controlling the terminal receives only 13 characters (12 alphabetic ones, plus a newline), although the user hit 26 keys. In non−canonical ("raw") mode, every key hit (including special editing keys such as ctl−H) sends a character immediately to the controlling process. The Bash prompt disables both icanon and echo, since it replaces the basic terminal line editor with its own more elaborate one. For example, when you hit ctl−A at the Bash prompt, there's no ^A echoed by the terminal, but Bash gets a \1 character, interprets it, and moves the cursor to the begining of the line. Stephane Chazelas setterm Set certain terminal attributes. This command writes to its terminal's stdout a string that changes the behavior of that terminal. bash$ setterm −cursor off bash$ The setterm command can be used within a script to change the appearance of text written to stdout, although there are certainly better tools available for this purpose. setterm −bold on echo bold hello Chapter 13. System and Administrative Commands 233 Advanced Bash−Scripting Guide setterm −bold off echo normal hello tset Show or initialize terminal settings. This is a less capable version of stty. bash$ tset −r Terminal type is xterm−xfree86. Kill is control−U (^U). Interrupt is control−C (^C). setserial Set or display serial port parameters. This command must be run by root user and is usually found in a system setup script. # From /etc/pcmcia/serial script: IRQ=`setserial /dev/$DEVICE | sed −e 's/.*IRQ: //'` setserial /dev/$DEVICE irq 0 ; setserial /dev/$DEVICE irq $IRQ getty, agetty The initialization process for a terminal uses getty or agetty to set it up for login by a user. These commands are not used within user shell scripts. Their scripting counterpart is stty. mesg Enables or disables write access to the current user's terminal. Disabling access would prevent another user on the network to write to the terminal. It can be very annoying to have a message about ordering pizza suddenly appear in the middle of the text file you are editing. On a multi−user network, you might therefore wish to disable write access to your terminal when you need to avoid interruptions. wall This is an acronym for "write all", i.e., sending a message to all users at every terminal logged into the network. It is primarily a system administrator's tool, useful, for example, when warning everyone that the system will shortly go down due to a problem (see Example 17−2). bash$ wall System going down for maintenance in 5 minutes! Broadcast message from bozo (pts/1) Sun Jul 8 13:53:27 2001... System going down for maintenance in 5 minutes! If write access to a particular terminal has been disabled with mesg, then wall cannot send a message to it. dmesg Lists all system bootup messages to stdout. Handy for debugging and ascertaining which device drivers were installed and which system interrupts in use. The output of dmesg may, of course, be parsed with grep, sed, or awk from within a script. bash$ dmesg | grep hda Kernel command line: ro root=/dev/hda2 hda: IBM−DLGA−23080, ATA DISK drive hda: 6015744 sectors (3080 MB) w/96KiB Cache, CHS=746/128/63 hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4 Chapter 13. System and Administrative Commands 234 Advanced Bash−Scripting Guide Information and Statistics uname Output system specifications (OS, kernel version, etc.) to stdout. Invoked with the −a option, gives verbose system info (see Example 12−5). The −s option shows only the OS type. bash$ uname −a Linux localhost.localdomain 2.2.15−2.5.0 #1 Sat Feb 5 00:13:43 EST 2000 i686 unknown bash$ uname −s Linux arch Show system architecture. Equivalent to uname −m. See Example 10−26. bash$ arch i686 bash$ uname −m i686 lastcomm Gives information about previous commands, as stored in the /var/account/pacct file. Command name and user name can be specified by options. This is one of the GNU accounting utilities. lastlog List the last login time of all system users. This references the /var/log/lastlog file. bash$ lastlog root tty1 bin daemon ... bozo tty1 Fri Dec 7 18:43:21 −0700 2001 **Never logged in** **Never logged in** Sat Dec 8 21:14:29 −0700 2001 bash$ lastlog | grep root root tty1 Fri Dec 7 18:43:21 −0700 2001 This command will fail if the user invoking it does not have read permission for the /var/log/lastlog file. lsof List open files. This command outputs a detailed table of all currently open files and gives information about their owner, size, the processes associated with them, and more. Of course, lsof may be piped to grep and/or awk to parse and analyze its results. bash$ lsof COMMAND PID init 1 init 1 init 1 cardmgr 213 ... USER root root root root FD mem mem mem mem TYPE REG REG REG REG DEVICE 3,5 3,5 3,5 3,5 SIZE 30748 73120 931668 36956 NODE NAME 30303 /sbin/init 8069 /lib/ld−2.1.3.so 8075 /lib/libc−2.1.3.so 30357 /sbin/cardmgr strace Chapter 13. System and Administrative Commands 235 Advanced Bash−Scripting Guide Diagnostic and debugging tool for tracing system calls and signals. The simplest way of invoking it is strace COMMAND. bash$ strace df execve("/bin/df", ["df"], [/* 45 vars */]) = 0 uname({sys="Linux", node="bozo.localdomain", ...}) = 0 brk(0) = 0x804f5e4 ... This is the Linux equivalent of truss. nmap Network port scanner. This command scans a server to locate open ports and the services associated with those ports. It is an important security tool for locking down a network against hacking attempts. #!/bin/bash SERVER=$HOST PORT_NUMBER=25 # localhost.localdomain (127.0.0.1). # SMTP port. nmap $SERVER | grep −w "$PORT_NUMBER" # Is that particular port open? # grep −w matches whole words only, #+ so this wouldn't match port 1025, for example. exit 0 # 25/tcp open smtp free Shows memory and cache usage in tabular form. The output of this command lends itself to parsing, using grep, awk or Perl. The procinfo command shows all the information that free does, and much more. bash$ free total Mem: 30504 −/+ buffers/cache: Swap: 68540 used 28624 10640 3128 free 1880 19864 65412 shared 15820 buffers 1608 cached 16376 To show unused RAM memory: bash$ free | grep Mem | awk '{ print $4 }' 1880 procinfo Extract and list information and statistics from the /proc pseudo−filesystem. This gives a very extensive and detailed listing. bash$ procinfo | grep Bootup Bootup: Wed Mar 21 15:15:50 2001 Load average: 0.04 0.21 0.34 3/47 6829 lsdev List devices, that is, show installed hardware. bash$ lsdev Device DMA IRQ I/O Ports −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− cascade 4 2 Chapter 13. System and Administrative Commands 236 Advanced Bash−Scripting Guide dma dma1 dma2 fpu ide0 ... 0080−008f 0000−001f 00c0−00df 00f0−00ff 01f0−01f7 03f6−03f6 14 du Show (disk) file usage, recursively. Defaults to current working directory, unless otherwise specified. bash$ du −ach 1.0k ./wi.sh 1.0k ./tst.sh 1.0k ./random.file 6.0k . 6.0k total df Shows filesystem usage in tabular form. bash$ df Filesystem /dev/hda5 /dev/hda8 /dev/hda7 1k−blocks 273262 222525 1408796 Used Available Use% Mounted on 92607 166547 36% / 123951 87085 59% /home 1075744 261488 80% /usr stat Gives detailed and verbose statistics on a given file (even a directory or device file) or set of files. bash$ stat test.cru File: "test.cru" Size: 49970 Allocated Blocks: 100 Filetype: Regular File Mode: (0664/−rw−rw−r−−) Uid: ( 501/ bozo) Gid: ( 501/ bozo) Device: 3,8 Inode: 18185 Links: 1 Access: Sat Jun 2 16:40:24 2001 Modify: Sat Jun 2 16:40:24 2001 Change: Sat Jun 2 16:40:24 2001 If the target file does not exist, stat returns an error message. bash$ stat nonexistent−file nonexistent−file: No such file or directory vmstat Display virtual memory statistics. bash$ vmstat procs rbw swpd 000 0 free 11040 buff 2636 memory cache 38952 si 0 swap so 0 bi 33 io system bo in 7 271 cs 88 us 8 cpu sy id 3 89 netstat Show current network statistics and information, such as routing tables and active connections. This utility accesses information in /proc/net (Chapter 28). See Example 28−3. netstat −r is equivalent to route. uptime Chapter 13. System and Administrative Commands 237 Advanced Bash−Scripting Guide Shows how long the system has been running, along with associated statistics. bash$ uptime 10:28pm up 1:57, 3 users, load average: 0.17, 0.34, 0.27 hostname Lists the system's host name. This command sets the host name in an /etc/rc.d setup script (/etc/rc.d/rc.sysinit or similar). It is equivalent to uname −n, and a counterpart to the $HOSTNAME internal variable. bash$ hostname localhost.localdomain bash$ echo $HOSTNAME localhost.localdomain hostid Echo a 32−bit hexadecimal numerical identifier for the host machine. bash$ hostid 7f0100 This command allegedly fetches a "unique" serial number for a particular system. Certain product registration procedures use this number to brand a particular user license. Unfortunately, hostid only returns the machine network address in hexadecimal, with pairs of bytes transposed. The network address of a typical non−networked Linux machine, is found in /etc/hosts. bash$ cat /etc/hosts 127.0.0.1 localhost.localdomain localhost As it happens, transposing the bytes of 127.0.0.1, we get 0.127.1.0, which translates in hex to 007f0100, the exact equivalent of what hostid returns, above. There exist only a few million other Linux machines with this identical hostid. sar Invoking sar (System Activity Reporter) gives a very detailed rundown on system statistics. The Santa Cruz Operation (SCO) released sar as Open Source in June, 1999. This command is not part of the base Linux distribution, but may be obtained as part of the sysstat utilities package, written by Sebastien Godard. bash$ sar Linux 2.4.9 (brooks.seringas.fr) 10:30:00 10:40:00 10:50:00 11:00:00 Average: 14:32:30 15:00:00 15:10:00 CPU all all all all %user 2.21 3.36 1.12 2.23 09/26/03 %nice 10.90 0.00 0.00 3.63 %system 65.48 72.36 80.77 72.87 %iowait 0.00 0.00 0.00 0.00 %idle 21.41 24.28 18.11 21.27 LINUX RESTART CPU all %user 8.59 %nice 2.40 %system 17.47 %iowait 0.00 %idle 71.54 Chapter 13. System and Administrative Commands 238 Advanced Bash−Scripting Guide 15:20:00 15:30:00 Average: all all all 4.07 0.79 6.33 1.00 2.94 1.70 11.95 7.56 14.71 0.00 0.00 0.00 82.98 88.71 77.26 readelf Show information and statistics about a designated elf binary. This is part of the binutils package. bash$ readelf −h /bin/bash ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX − System V ABI Version: 0 Type: EXEC (Executable file) ... size The size [/path/to/binary] command gives the segment sizes of a binary executable or archive file. This is mainly of use to programmers. bash$ size /bin/bash text data bss 495971 22496 17392 dec 535859 hex filename 82d33 /bin/bash System Logs logger Appends a user−generated message to the system log (/var/log/messages). You do not have to be root to invoke logger. logger Experiencing instability in network connection at 23:10, 05/21. # Now, do a 'tail /var/log/messages'. By embedding a logger command in a script, it is possible to write debugging information to /var/log/messages. logger −t $0 −i Logging at line "$LINENO". # The "−t" option specifies the tag for the logger entry. # The "−i" option records the process ID. # tail /var/log/message # ... # Jul 7 20:48:58 localhost ./test.sh[1712]: Logging at line 3. logrotate This utility manages the system log files, rotating, compressing, deleting, and/or mailing them, as appropriate. Usually cron runs logrotate on a daily basis. Adding an appropriate entry to /etc/logrotate.conf makes it possible to manage personal log files, as well as system−wide ones. Job Control ps Chapter 13. System and Administrative Commands 239 Advanced Bash−Scripting Guide Process Statistics: lists currently executing processes by owner and PID (process ID). This is usually invoked with ax options, and may be piped to grep or sed to search for a specific process (see Example 11−11 and Example 28−2). bash$ 295 ? ps ax | grep sendmail S 0:00 sendmail: accepting connections on port 25 pstree Lists currently executing processes in "tree" format. The −p option shows the PIDs, as well as the process names. top Continuously updated display of most cpu−intensive processes. The −b option displays in text mode, so that the output may be parsed or accessed from a script. bash$ top −b 8:30pm up 3 min, 3 users, load average: 0.49, 0.32, 0.13 45 processes: 44 sleeping, 1 running, 0 zombie, 0 stopped CPU states: 13.6% user, 7.3% system, 0.0% nice, 78.9% idle Mem: 78396K av, 65468K used, 12928K free, 0K shrd, Swap: 157208K av, 0K used, 157208K free PID 848 1 2 ... USER bozo root root PRI 17 8 9 NI 0 0 0 SIZE 996 512 0 RSS SHARE STAT %CPU %MEM 996 800 R 5.6 1.2 512 444 S 0.0 0.6 0 0 SW 0.0 0.0 TIME 0:00 0:04 0:00 2352K buff 37244K cached COMMAND top init keventd nice Run a background job with an altered priority. Priorities run from 19 (lowest) to −20 (highest). Only root may set the negative (higher) priorities. Related commands are renice, snice, and skill. nohup Keeps a command running even after user logs off. The command will run as a foreground process unless followed by &. If you use nohup within a script, consider coupling it with a wait to avoid creating an orphan or zombie process. pidof Identifies process ID (PID) of a running job. Since job control commands, such as kill and renice act on the PID of a process (not its name), it is sometimes necessary to identify that PID. The pidof command is the approximate counterpart to the $PPID internal variable. bash$ pidof xclock 880 Example 13−5. pidof helps kill a process #!/bin/bash # kill−process.sh NOPROCESS=2 process=xxxyyyzzz # Use nonexistent process. # For demo purposes only... # ... don't want to actually kill any actual process with this script. # # If, for example, you wanted to use this script to logoff the Internet, Chapter 13. System and Administrative Commands 240 Advanced Bash−Scripting Guide # process=pppd t=`pidof $process` # Find pid (process id) of $process. # The pid is needed by 'kill' (can't 'kill' by program name). if [ −z "$t" ] # If process not present, 'pidof' returns null. then echo "Process $process was not running." echo "Nothing killed." exit $NOPROCESS fi kill $t # May need 'kill −9' for stubborn process. # Need a check here to see if process allowed itself to be killed. # Perhaps another " t=`pidof $process` ". # This entire script could be replaced by # kill $(pidof −x process_name) # but it would not be as instructive. exit 0 fuser Identifies the processes (by PID) that are accessing a given file, set of files, or directory. May also be invoked with the −k option, which kills those processes. This has interesting implications for system security, especially in scripts preventing unauthorized users from accessing system services. cron Administrative program scheduler, performing such duties as cleaning up and deleting system log files and updating the slocate database. This is the superuser version of at (although each user may have their own crontab file which can be changed with the crontab command). It runs as a daemon and executes scheduled entries from /etc/crontab. Some flavors of Linux run crond, Matthew Dillon's version of cron. Process Control and Booting init The init command is the parent of all processes. Called in the final step of a bootup, init determines the runlevel of the system from /etc/inittab. Invoked by its alias telinit, and by root only. telinit Symlinked to init, this is a means of changing the system runlevel, usually done for system maintenance or emergency filesystem repairs. Invoked only by root. This command can be dangerous − be certain you understand it well before using! runlevel Shows the current and last runlevel, that is, whether the system is halted (runlevel 0), in single−user mode (1), in multi−user mode (2 or 3), in X Windows (5), or rebooting (6). This command accesses the /var/run/utmp file. halt, shutdown, reboot Command set to shut the system down, usually just prior to a power down. Network ifconfig Chapter 13. System and Administrative Commands 241 Advanced Bash−Scripting Guide Network interface configuration and tuning utility. It is most often used at bootup to set up the interfaces, or to shut them down when rebooting. # Code snippets from /etc/rc.d/init.d/network # ... # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 0 [ −x /sbin/ifconfig ] || exit 0 # ... for i in $interfaces ; do if ifconfig $i 2>/dev/null | grep −q "UP" >/dev/null 2>&1 ; then action "Shutting down interface $i: " ./ifdown $i boot fi # The GNU−specific "−q" option to "grep" means "quiet", i.e., producing no output. # Redirecting output to /dev/null is therefore not strictly necessary. # ... echo "Currently active devices:" echo `/sbin/ifconfig | grep ^[a−z] | awk '{print $1}'` # ^^^^^ should be quoted to prevent globbing. # The following also work. # echo $(/sbin/ifconfig | awk '/^[a−z]/ { print $1 })' # echo $(/sbin/ifconfig | sed −e 's/ .*//') # Thanks, S.C., for additional comments. See also Example 30−6. iwconfig This is the command set for configuring a wireless network. It is the wireless equivalent of ifconfig, above. route Show info about or make changes to the kernel routing table. bash$ route Destination Gateway Genmask Flags pm3−67.bozosisp * 255.255.255.255 UH 127.0.0.0 * 255.0.0.0 U default pm3−67.bozosisp 0.0.0.0 UG MSS Window 40 0 40 0 40 0 irtt Iface 0 ppp0 0 lo 0 ppp0 chkconfig Check network configuration. This command lists and manages the network services started at bootup in the /etc/rc?.d directory. Originally a port from IRIX to Red Hat Linux, chkconfig may not be part of the core installation of some Linux flavors. bash$ chkconfig −−list atd 0:off rwhod 0:off ... 1:off 1:off 2:off 2:off 3:on 3:off 4:on 4:off 5:on 5:off 6:off 6:off tcpdump Chapter 13. System and Administrative Commands 242 Advanced Bash−Scripting Guide Network packet "sniffer". This is a tool for analyzing and troubleshooting traffic on a network by dumping packet headers that match specified criteria. Dump ip packet traffic between hosts bozoville and caduceus: bash$ tcpdump ip host bozoville and caduceus Of course, the output of tcpdump can be parsed, using certain of the previously discussed text processing utilities. Filesystem mount Mount a filesystem, usually on an external device, such as a floppy or CDROM. The file /etc/fstab provides a handy listing of available filesystems, partitions, and devices, including options, that may be automatically or manually mounted. The file /etc/mtab shows the currently mounted filesystems and partitions (including the virtual ones, such as /proc). mount −a mounts all filesystems and partitions listed in /etc/fstab, except those with a noauto option. At bootup, a startup script in /etc/rc.d (rc.sysinit or something similar) invokes this to get everything mounted. mount −t iso9660 /dev/cdrom /mnt/cdrom # Mounts CDROM mount /mnt/cdrom # Shortcut, if /mnt/cdrom listed in /etc/fstab This versatile command can even mount an ordinary file on a block device, and the file will act as if it were a filesystem. Mount accomplishes that by associating the file with a loopback device. One application of this is to mount and examine an ISO9660 image before burning it onto a CDR. [40] Example 13−6. Checking a CD image # As root... mkdir /mnt/cdtest # Prepare a mount point, if not already there. mount −r −t iso9660 −o loop cd−image.iso /mnt/cdtest # Mount the image. # "−o loop" option equivalent to "losetup /dev/loop0" cd /mnt/cdtest # Now, check the image. ls −alR # List the files in the directory tree there. # And so forth. umount Unmount a currently mounted filesystem. Before physically removing a previously mounted floppy or CDROM disk, the device must be umounted, else filesystem corruption may result. umount /mnt/cdrom # You may now press the eject button and safely remove the disk. The automount utility, if properly installed, can mount and unmount floppies or CDROM disks as they are accessed or removed. On laptops with swappable floppy Chapter 13. System and Administrative Commands 243 Advanced Bash−Scripting Guide and CDROM drives, this can cause problems, though. sync Forces an immediate write of all updated data from buffers to hard drive (synchronize drive with buffers). While not strictly necessary, a sync assures the sys admin or user that the data just changed will survive a sudden power failure. In the olden days, a sync; sync (twice, just to make absolutely sure) was a useful precautionary measure before a system reboot. At times, you may wish to force an immediate buffer flush, as when securely deleting a file (see Example 12−48) or when the lights begin to flicker. losetup Sets up and configures loopback devices. Example 13−7. Creating a filesystem in a file SIZE=1000000 # 1 meg # # # # Set up file of designated size. Set it up as loopback device. Create filesystem. Mount it. head −c $SIZE < /dev/zero > file losetup /dev/loop0 file mke2fs /dev/loop0 mount −o loop /dev/loop0 /mnt # Thanks, S.C. mkswap Creates a swap partition or file. The swap area must subsequently be enabled with swapon. swapon, swapoff Enable / disable swap partitition or file. These commands usually take effect at bootup and shutdown. mke2fs Create a Linux ext2 filesystem. This command must be invoked as root. Example 13−8. Adding a new hard drive #!/bin/bash # # # # Adding a second hard drive to system. Software configuration. Assumes hardware already mounted. From an article by the author of this document. In issue #38 of "Linux Gazette", http://www.linuxgazette.com. # This script must be run as root. # Non−root exit error. ROOT_UID=0 E_NOTROOT=67 if [ "$UID" −ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi # Use with extreme caution! # If something goes wrong, you may wipe out your current filesystem. NEWDISK=/dev/hdb MOUNTPOINT=/mnt/newdisk # Assumes /dev/hdb vacant. Check! # Or choose another mount point. Chapter 13. System and Administrative Commands 244 Advanced Bash−Scripting Guide fdisk $NEWDISK mke2fs −cv $NEWDISK1 # Check for bad blocks & verbose output. # Note: /dev/hdb1, *not* /dev/hdb! mkdir $MOUNTPOINT chmod 777 $MOUNTPOINT # Makes new drive accessible to all users. # # # # Now, test... mount −t ext2 /dev/hdb1 /mnt/newdisk Try creating a directory. If it works, umount it, and proceed. # Final step: # Add the following line to /etc/fstab. # /dev/hdb1 /mnt/newdisk ext2 defaults exit 0 11 See also Example 13−7 and Example 29−3. tune2fs Tune ext2 filesystem. May be used to change filesystem parameters, such as maximum mount count. This must be invoked as root. This is an extremely dangerous command. Use it at your own risk, as you may inadvertently destroy your filesystem. dumpe2fs Dump (list to stdout) very verbose filesystem info. This must be invoked as root. root# dumpe2fs /dev/hda7 | dumpe2fs 1.19, 13−Jul−2000 Mount count: Maximum mount count: grep 'ount count' for EXT2 FS 0.5b, 95/08/09 6 20 hdparm List or change hard disk parameters. This command must be invoked as root, and it may be dangerous if misused. fdisk Create or change a partition table on a storage device, usually a hard drive. This command must be invoked as root. Use this command with extreme caution. If something goes wrong, you may destroy an existing filesystem. fsck, e2fsck, debugfs Filesystem check, repair, and debug command set. fsck: a front end for checking a Unix filesystem (may invoke other utilities). The actual filesystem type generally defaults to ext2. e2fsck: ext2 filesystem checker. debugfs: ext2 filesystem debugger. One of the uses of this versatile, but dangerous command is to (attempt to) recover deleted files. For advanced users only! Chapter 13. System and Administrative Commands 245 Advanced Bash−Scripting Guide All of these should be invoked as root, and they can damage or destroy a filesystem if misused. badblocks Checks for bad blocks (physical media flaws) on a storage device. This command finds use when formatting a newly installed hard drive or testing the integrity of backup media. [41] As an example, badblocks /dev/fd0 tests a floppy disk. The badblocks command may be invoked destructively (overwrite all data) or in non−destructive read−only mode. If root user owns the device to be tested, as is generally the case, then root must invoke this command. lsusb, usbmodules The lsusb command lists all USB (Universal Serial Bus) buses and the devices hooked up to them. The usbmodules command outputs information about the driver modules for connected USB devices. root# lsusb Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 ... mkbootdisk Creates a boot floppy which can be used to bring up the system if, for example, the MBR (master boot record) becomes corrupted. The mkbootdisk command is actually a Bash script, written by Erik Troan, in the /sbin directory. chroot CHange ROOT directory. Normally commands are fetched from $PATH, relative to /, the default root directory. This changes the root directory to a different one (and also changes the working directory to there). This is useful for security purposes, for instance when the system administrator wishes to restrict certain users, such as those telnetting in, to a secured portion of the filesystem (this is sometimes referred to as confining a guest user to a "chroot jail"). Note that after a chroot, the execution path for system binaries is no longer valid. A chroot /opt would cause references to /usr/bin to be translated to /opt/usr/bin. Likewise, chroot /aaa/bbb /bin/ls would redirect future instances of ls to /aaa/bbb as the base directory, rather than / as is normally the case. An alias XX 'chroot /aaa/bbb ls' in a user's ~/.bashrc effectively restricts which portion of the filesystem she may run command "XX" on. The chroot command is also handy when running from an emergency boot floppy (chroot to /dev/fd0), or as an option to lilo when recovering from a system crash. Other uses include installation from a different filesystem (an rpm option) or running a readonly filesystem from a CD ROM. Invoke only as root, and use with care. It might be necessary to copy certain system files to a chrooted directory, since the normal $PATH can no longer be relied upon. Chapter 13. System and Administrative Commands 246 Advanced Bash−Scripting Guide lockfile This utility is part of the procmail package (www.procmail.org). It creates a lock file, a semaphore file that controls access to a file, device, or resource. The lock file serves as a flag that this particular file, device, or resource is in use by a particular process ("busy"), and this permits only restricted access (or no access) to other processes. Lock files are used in such applications as protecting system mail folders from simultaneously being changed by multiple users, indicating that a modem port is being accessed, and showing that an instance of Netscape is using its cache. Scripts may check for the existence of a lock file created by a certain process to check if that process is running. Note that if a script attempts create a lock file that already exists, the script will likely hang. Normally, applications create and check for lock files in the /var/lock directory. A script can test for the presence of a lock file by something like the following. appname=xyzip # Application "xyzip" created lock file "/var/lock/xyzip.lock". if [ −e "/var/lock/$appname.lock ] then ... mknod Creates block or character device files (may be necessary when installing new hardware on the system). The MAKEDEV utility has virtually all of the functionality of mknod, and is easier to use. MAKEDEV Utility for creating device files. It must be run as root, and in the /dev directory. root# ./MAKEDEV This is a sort of advanced version of mknod. tmpwatch Automatically deletes files which have not been accessed within a specified period of time. Usually invoked by cron to remove stale log files. Backup dump, restore The dump command is an elaborate filesystem backup utility, generally used on larger installations and networks. [42] It reads raw disk partitions and writes a backup file in a binary format. Files to be backed up may be saved to a variety of storage media, including disks and tape drives. The restore command restores backups made with dump. fdformat Perform a low−level format on a floppy disk. System Resources ulimit Sets an upper limit on use of system resources. Usually invoked with the −f option, which sets a limit on file size (ulimit −f 1000 limits files to 1 meg maximum). The −t option limits the coredump size (ulimit −c 0 eliminates coredumps). Normally, the value of ulimit would be set in /etc/profile and/or ~/.bash_profile (see Chapter 27). Chapter 13. System and Administrative Commands 247 Advanced Bash−Scripting Guide Judicious use of ulimit can protect a system against the dreaded fork bomb. #!/bin/bash # This script is for illustrative purposes only. # Run it at your own peril −− it *will* freeze your system. while true do $0 & # # #+ #+ # # Endless loop. This script invokes itself . . . forks an infinite number of times . . . until the system freezes up because all resources exhausted. This is the notorious "sorcerer's appentice" scenario. Will not exit here, because this script will never terminate. done exit 0 A ulimit −Hu XX (where XX is the user process limit) in /etc/profile would abort this script when it exceeds the preset limit. setquota Set user or group disk quotas from the command line. umask User file creation MASK. Limit the default file attributes for a particular user. All files created by that user take on the attributes specified by umask. The (octal) value passed to umask defines the file permissions disabled. For example, umask 022 ensures that new files will have at most 755 permissions (777 NAND 022). [43] Of course, the user may later change the attributes of particular files with chmod. The usual practice is to set the value of umask in /etc/profile and/or ~/.bash_profile (see Chapter 27). rdev Get info about or make changes to root device, swap space, or video mode. The functionality of rdev has generally been taken over by lilo, but rdev remains useful for setting up a ram disk. This is a dangerous command, if misused. Modules lsmod List installed kernel modules. bash$ lsmod Module autofs opl3 serial_cs sb uart401 sound soundlow soundcore ds i82365 pcmcia_core Size Used by 9456 2 (autoclean) 11376 0 5456 0 (unused) 34752 0 6384 0 [sb] 58368 0 [opl3 sb uart401] 464 0 [sound] 2800 6 [sb sound] 6448 2 [serial_cs] 22928 2 45984 0 [serial_cs ds i82365] Doing a cat /proc/modules gives the same information. insmod Force installation of a kernel module (use modprobe instead, when possible). Must be invoked as Chapter 13. System and Administrative Commands 248 Advanced Bash−Scripting Guide root. rmmod Force unloading of a kernel module. Must be invoked as root. modprobe Module loader that is normally invoked automatically in a startup script. Must be invoked as root. depmod Creates module dependency file, usually invoked from startup script. modinfo Output information about a loadable module. bash$ modinfo hid filename: /lib/modules/2.4.20−6/kernel/drivers/usb/hid.o description: "USB HID support drivers" author: "Andreas Gal, Vojtech Pavlik " license: "GPL" Miscellaneous env Runs a program or script with certain environmental variables set or changed (without changing the overall system environment). The [varname=xxx] permits changing the environmental variable varname for the duration of the script. With no options specified, this command lists all the environmental variable settings. In Bash and other Bourne shell derivatives, it is possible to set variables in a single command's environment. var1=value1 var2=value2 commandXXX # $var1 and $var2 set in the environment of 'commandXXX' only. The first line of a script (the "sha−bang" line) may use env when the path to the shell or interpreter is unknown. #! /usr/bin/env perl print "This Perl script will run,\n"; print "even when I don't know where to find Perl.\n"; # Good for portable cross−platform scripts, # where the Perl binaries may not be in the expected place. # Thanks, S.C. ldd Show shared lib dependencies for an executable file. bash$ ldd /bin/ls libc.so.6 => /lib/libc.so.6 (0x4000c000) /lib/ld−linux.so.2 => /lib/ld−linux.so.2 (0x80000000) watch Run a command repeatedly, at specified time intervals. The default is two−second intervals, but this may be changed with the −n option. Chapter 13. System and Administrative Commands 249 Advanced Bash−Scripting Guide watch −n 5 tail /var/log/messages # Shows tail end of system log, /var/log/messages, every five seconds. strip Remove the debugging symbolic references from an executable binary. This decreases its size, but makes debugging it impossible. This command often occurs in a Makefile, but rarely in a shell script. nm List symbols in an unstripped compiled binary. rdist Remote distribution client: synchronizes, clones, or backs up a file system on a remote server. Using our knowledge of administrative commands, let us examine a system script. One of the shortest and simplest to understand scripts is killall, used to suspend running processes at system shutdown. Example 13−9. killall, from /etc/rc.d/init.d #!/bin/sh # −−> Comments added by the author of this document marked by "# −−>". # −−> This is part of the 'rc' script package # −−> by Miquel van Smoorenburg, # −−> This particular script seems to be Red Hat specific # −−> (may not be present in other distributions). # Bring down all unneeded services that are still running (there shouldn't # be any, so this is just a sanity check) for i in /var/lock/subsys/*; do # −−> Standard for/in loop, but since "do" is on same line, # −−> it is necessary to add ";". # Check if the script is there. [ ! −f $i ] && continue # −−> This is a clever use of an "and list", equivalent to: # −−> if [ ! −f "$i" ]; then continue # Get the subsystem name. subsys=${i#/var/lock/subsys/} # −−> Match variable name, which, in this case, is the file name. # −−> This is the exact equivalent of subsys=`basename $i`. # −−> It gets it from the lock file name (if there is a lock file, # −−>+ that's proof the process has been running). # −−> See the "lockfile" entry, above. # Bring the subsystem down. if [ −f /etc/rc.d/init.d/$subsys.init ]; then /etc/rc.d/init.d/$subsys.init stop else /etc/rc.d/init.d/$subsys stop # −−> Suspend running jobs and daemons # −−> using the 'stop' shell builtin. fi done Chapter 13. System and Administrative Commands 250 Advanced Bash−Scripting Guide That wasn't so bad. Aside from a little fancy footwork with variable matching, there is no new material there. Exercise 1. In /etc/rc.d/init.d, analyze the halt script. It is a bit longer than killall, but similar in concept. Make a copy of this script somewhere in your home directory and experiment with it (do not run it as root). Do a simulated run with the −vn flags (sh −vn scriptname). Add extensive comments. Change the "action" commands to "echos". Exercise 2. Look at some of the more complex scripts in /etc/rc.d/init.d. See if you can understand parts of them. Follow the above procedure to analyze them. For some additional insight, you might also examine the file sysvinitfiles in /usr/share/doc/initscripts−?.??, which is part of the "initscripts" documentation. Chapter 13. System and Administrative Commands 251 Chapter 14. Command Substitution Command substitution reassigns the output of a command [44] or even multiple commands; it literally plugs the command output into another context. [45] The classic form of command substitution uses backquotes (`...`). Commands within backquotes (backticks) generate command line text. script_name=`basename $0` echo "The name of this script is $script_name." The output of commands can be used as arguments to another command, to set a variable, and even for generating the argument list in a for loop. rm `cat filename` # "filename" contains a list of files to delete. # # S. C. points out that "arg list too long" error might result. # Better is xargs rm −− < filename # ( −− covers those cases where "filename" begins with a "−" ) textfile_listing=`ls *.txt` # Variable contains names of all *.txt files in current working directory. echo $textfile_listing textfile_listing2=$(ls *.txt) echo $textfile_listing2 # Same result. # # # # # # # # # The alternative form of command substitution. A possible problem with putting a list of files into a single string is that a newline may creep in. A safer way to assign a list of files to a parameter is with an array. shopt −s nullglob # If no match, filename expands to nothing. textfile_listing=( *.txt ) Thanks, S.C. Command substitution invokes a subshell. Command substitution may result in word splitting. COMMAND `echo a b` COMMAND "`echo a b`" COMMAND `echo` COMMAND "`echo`" # 2 args: a and b # 1 arg: "a b" # no arg # one empty arg # Thanks, S.C. Even when there is no word splitting, command substitution can remove trailing newlines. Chapter 14. Command Substitution 252 Advanced Bash−Scripting Guide # cd "`pwd`" # However... # This should always work. mkdir 'dir with trailing newline ' cd 'dir with trailing newline ' cd "`pwd`" # Error message: # bash: cd: /tmp/file with trailing newline: No such file or directory cd "$PWD" # Works fine. old_tty_setting=$(stty −g) echo "Hit a key " stty −icanon −echo # Save old terminal setting. # Disable "canonical" mode for terminal. # Also, disable *local* echo. key=$(dd bs=1 count=1 2> /dev/null) # Using 'dd' to get a keypress. stty "$old_tty_setting" # Restore old setting. echo "You hit ${#key} key." # ${#variable} = number of characters in $variable # # Hit any key except RETURN, and the output is "You hit 1 key." # Hit RETURN, and it's "You hit 0 key." # The newline gets eaten in the command substitution. Thanks, S.C. Using echo to output an unquoted variable set with command substitution removes trailing newlines characters from the output of the reassigned command(s). This can cause unpleasant surprises. dir_listing=`ls −l` echo $dir_listing # unquoted # Expecting a nicely ordered directory listing. # However, what you get is: # total 3 −rw−rw−r−− 1 bozo bozo 30 May 13 17:15 1.txt −rw−rw−r−− 1 bozo # bozo 51 May 15 20:57 t2.sh −rwxr−xr−x 1 bozo bozo 217 Mar 5 21:13 wi.sh # The newlines disappeared. echo "$dir_listing" # quoted # −rw−rw−r−− 1 bozo 30 May 13 17:15 1.txt # −rw−rw−r−− 1 bozo 51 May 15 20:57 t2.sh # −rwxr−xr−x 1 bozo 217 Mar 5 21:13 wi.sh Command substitution even permits setting a variable to the contents of a file, using either redirection or the cat command. variable1=`/dev/null|grep −E "^I.*Cls=03.*Prot=02"` kbdoutput=`cat /proc/bus/usb/devices 2>/dev/null|grep −E "^I.*Cls=03.*Prot=01"` ... fi Do not set a variable to the contents of a long text file unless you have a very good reason for doing so. Do not set a variable to the contents of a binary file, even as a joke. Example 14−1. Stupid script tricks #!/bin/bash # stupid−script−tricks.sh: Don't try this at home, folks. # From "Stupid Script Tricks," Volume I. dangerous_variable=`cat /boot/vmlinuz` # The compressed Linux kernel itself. echo "string−length of \$dangerous_variable = ${#dangerous_variable}" # string−length of $dangerous_variable = 794151 # (Does not give same count as 'wc −c /boot/vmlinuz'.) # echo "$dangerous_variable" # Don't try this! It would hang the script. # The document author is aware of no useful applications for #+ setting a variable to the contents of a binary file. Chapter 14. Command Substitution 254 Advanced Bash−Scripting Guide exit 0 Notice that a buffer overrun does not occur. This is one instance where an interpreted language, such as Bash, provides more protection from programmer mistakes than a compiled language. Command substitution permits setting a variable to the output of a loop. The key to this is grabbing the output of an echo command within the loop. Example 14−2. Generating a variable from a loop #!/bin/bash # csubloop.sh: Setting a variable to the output of a loop. variable1=`for i in 1 2 3 4 5 do echo −n "$i" done` echo "variable1 = $variable1" # The 'echo' command is critical #+ to command substitution here. # variable1 = 12345 i=0 variable2=`while [ "$i" −lt 10 ] do echo −n "$i" # Again, the necessary 'echo'. let "i += 1" # Increment. done` echo "variable2 = $variable2" # variable2 = 0123456789 # It's possible to embed a loop within a variable declaration. exit 0 Command substitution makes it possible to extend the toolset available to Bash. It is simply a matter of writing a program or script that outputs to stdout (like a well−behaved Unix tool should) and assigning that output to a variable. #include /* "Hello, world." C program */ int main() { printf( "Hello, world." ); return (0); } bash$ gcc −o hello hello.c #!/bin/bash # hello.sh Chapter 14. Command Substitution 255 Advanced Bash−Scripting Guide greeting=`./hello` echo $greeting bash$ sh hello.sh Hello, world. The $(COMMAND) form has superseded backticks for command substitution. output=$(sed −n /"$1"/p $file) # From "grp.sh" example. # Setting a variable to the contents of a text file. File_contents1=$(cat $file1) File_contents2=$(<$file2) # Bash permits this also. The $(...) form of command substitution treats a double backslash in a different way than `...`. bash$ echo `echo \\` bash$ echo $(echo \\) \ Examples of command substitution in shell scripts: 1. Example 10−7 2. Example 10−26 3. Example 9−27 4. Example 12−3 5. Example 12−18 6. Example 12−15 7. Example 12−43 8. Example 10−13 9. Example 10−10 10. Example 12−27 11. Example 16−7 12. Example A−18 13. Example 28−2 14. Example 12−36 15. Example 12−37 16. Example 12−38 Chapter 14. Command Substitution 256 Chapter 15. Arithmetic Expansion Arithmetic expansion provides a powerful tool for performing arithmetic operations in scripts. Translating a string into a numerical expression is relatively straightforward using backticks, double parentheses, or let. Variations Arithmetic expansion with backticks (often used in conjunction with expr) z=`expr $z + 3` # The 'expr' command performs the expansion. Arithmetic expansion with double parentheses, and using let The use of backticks in arithmetic expansion has been superseded by double parentheses −− ((...)) and $((...)) −− and also by the very convenient let construction. z=$(($z+3)) z=$((z+3) # # #+ #+ Also correct. Within double parentheses, parameter dereferencing is optional. # $((EXPRESSION)) is arithmetic expansion. # Not to be confused with #+ command substitution. # You may also use operations within double parentheses without assignment. n=0 echo "n = $n" (( n += 1 )) # (( $n += 1 )) is incorrect! echo "n = $n" #n=0 # Increment. #n=1 let z=z+3 let "z += 3" # Quotes permit the use of spaces. # The 'let' operator actually performs arithmetic evaluation, #+ rather than expansion. Examples of arithmetic expansion in scripts: 1. Example 12−9 2. Example 10−14 3. Example 26−1 4. Example 26−11 5. Example A−18 Chapter 15. Arithmetic Expansion 257 Chapter 16. I/O Redirection There are always three default "files" open, stdin (the keyboard), stdout (the screen), and stderr (error messages output to the screen). These, and any other open files, can be redirected. Redirection simply means capturing output from a file, command, program, script, or even code block within a script (see Example 3−1 and Example 3−2) and sending it as input to another file, command, program, or script. Each open file gets assigned a file descriptor. [46] The file descriptors for stdin, stdout, and stderr are 0, 1, and 2, respectively. For opening additional files, there remain descriptors 3 to 9. It is sometimes useful to assign one of these additional file descriptors to stdin, stdout, or stderr as a temporary duplicate link. [47] This simplifies restoration to normal after complex redirection and reshuffling (see Example 16−1). COMMAND_OUTPUT > # Redirect stdout to a file. # Creates the file if not present, otherwise overwrites it. ls −lR > dir−tree.list # Creates a file containing a listing of the directory tree. : > filename # The > truncates file "filename" to zero length. # If file not present, creates zero−length file (same effect as 'touch'). # The : serves as a dummy placeholder, producing no output. > filename # The > truncates file "filename" to zero length. # If file not present, creates zero−length file (same effect as 'touch'). # (Same result as ": >", above, but this does not work with some shells.) COMMAND_OUTPUT >> # Redirect stdout to a file. # Creates the file if not present, otherwise appends to it. # Single−line redirection commands (affect only the line they are on): # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− 1>filename # Redirect 1>>filename # Redirect 2>filename # Redirect 2>>filename # Redirect &>filename # Redirect stdout to file "filename". and append stdout to file "filename". stderr to file "filename". and append stderr to file "filename". both stdout and stderr to file "filename". #============================================================================== # Redirecting stdout, one line at a time. LOGFILE=script.log echo echo echo echo "This "This "This "This statement statement statement statement is is is is sent to the log file, \"$LOGFILE\"." 1>$LOGFILE appended to \"$LOGFILE\"." 1>>$LOGFILE also appended to \"$LOGFILE\"." 1>>$LOGFILE echoed to stdout, and will not appear in \"$LOGFILE\"." Chapter 16. I/O Redirection 258 Advanced Bash−Scripting Guide # These redirection commands automatically "reset" after each line. # Redirecting stderr, one line at a time. ERRORFILE=script.errors bad_command1 2>$ERRORFILE bad_command2 2>>$ERRORFILE bad_command3 # Error message sent to $ERRORFILE. # Error message appended to $ERRORFILE. # Error message echoed to stderr, #+ and does not appear in $ERRORFILE. # These redirection commands also automatically "reset" after each line. #============================================================================== 2>&1 # Redirects stderr to stdout. # Error messages get sent to same place as standard output. i>&j # Redirects file descriptor i to j. # All output of file pointed to by i gets sent to file pointed to by j. >&j # Redirects, by default, file descriptor 1 (stdout) to j. # All stdout gets sent to file pointed to by j. 0< FILENAME < FILENAME # Accept input from a file. # Companion command to ">", and often used in combination with it. # # grep search−word filename # Open file "filename" for reading and writing, and assign file descriptor "j" to it. # If "filename" does not exist, create it. # If file descriptor "j" is not specified, default to fd 0, stdin. # # An application of this is writing at a specified place in a file. echo 1234567890 > File # Write string to "File". exec 3<> File # Open "File" and assign fd 3 to it. read −n 4 <&3 # Read only 4 characters. echo −n . >&3 # Write a decimal point there. exec 3>&− # Close fd 3. cat File # ==> 1234.67890 # Random access, by golly. | # Pipe. # General purpose process and command chaining tool. # Similar to ">", but more general in effect. # Useful for chaining commands, scripts, files, and programs together. cat *.txt | sort | uniq > result−file # Sorts the output of all the .txt files and deletes duplicate lines, # finally saves results to "result−file". Chapter 16. I/O Redirection 259 Advanced Bash−Scripting Guide Multiple instances of input and output redirection and/or pipes can be combined in a single command line. command < input−file > output−file command1 | command2 | command3 > output−file See Example 12−26 and Example A−16. Multiple output streams may be redirected to one file. ls # # #+ −yz >> command.log 2>&1 Capture result of illegal options "yz" in file "command.log." Because stderr is redirected to the file, any error messages will also be there. # Note, however, that the following does *not* give the same result. ls −yz 2>&1 >> command.log # Outputs an error message and does not write to file. # If redirecting both stdout and stderr, #+ the order of the commands makes a difference. Closing File Descriptors n<&− Close input file descriptor n. 0<&−, <&− Close stdin. n>&− Close output file descriptor n. 1>&−, >&− Close stdout. Child processes inherit open file descriptors. This is why pipes work. To prevent an fd from being inherited, close it. # Redirecting only stderr to a pipe. exec 3>&1 ls −l 2>&1 >&3 3>&− | grep bad 3>&− # ^^^^ ^^^^ exec 3>&− # Thanks, S.C. # Save current "value" of stdout. # Close fd 3 for 'grep' (but not 'ls'). # Now close it for the remainder of the script. For a more detailed introduction to I/O redirection see Appendix E. 16.1. Using exec An exec filename command redirects stdout to a designated file. This sends all command output that would normally go to stdout to that file. Example 16−2. Redirecting stdout using exec #!/bin/bash # reassign−stdout.sh LOGFILE=logfile.txt exec 6>&1 # Link file descriptor #6 with stdout. # Saves stdout. # stdout replaced with file "logfile.txt". exec > $LOGFILE # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # # All output from commands in this block sent to file $LOGFILE. echo −n "Logfile: " date echo "−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−" Chapter 16. I/O Redirection 261 Advanced Bash−Scripting Guide echo echo "Output of \"ls −al\" command" echo ls −al echo; echo echo "Output of \"df\" command" echo df # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # exec 1>&6 6>&− # Restore stdout and close file descriptor #6. echo echo "== stdout now restored to default == " echo ls −al echo exit 0 Example 16−3. Redirecting both stdin and stdout in the same script with exec #!/bin/bash # upperconv.sh # Converts a specified input file to uppercase. E_FILE_ACCESS=70 E_WRONG_ARGS=71 if [ ! then echo echo exit fi −r "$1" ] # Is specified input file readable? "Can't read from input file!" "Usage: $0 input−file output−file" $E_FILE_ACCESS # Will exit with same error #+ even if input file ($1) not specified. if [ −z "$2" ] then echo "Need to specify output file." echo "Usage: $0 input−file output−file" exit $E_WRONG_ARGS fi exec 4<&0 exec < $1 exec 7>&1 exec > $2 # Will read from input file. # Will write to output file. # Assumes output file writable (add check?). # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− cat − | tr a−z A−Z # Uppercase conversion. # ^^^^^ # Reads from stdin. # ^^^^^^^^^^ # Writes to stdout. # However, both stdin and stdout were redirected. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Chapter 16. I/O Redirection 262 Advanced Bash−Scripting Guide exec 1>&7 7>&− exec 0<&4 4<&− # Restore stout. # Restore stdin. # After restoration, the following line prints to stdout as expected. echo "File \"$1\" written to \"$2\" as uppercase conversion." exit 0 16.2. Redirecting Code Blocks Blocks of code, such as while, until, and for loops, even if/then test blocks can also incorporate redirection of stdin. Even a function may use this form of redirection (see Example 23−10). The < operator at the end of the code block accomplishes this. Example 16−4. Redirected while loop #!/bin/bash if [ −z "$1" ] then Filename=names.data # Default, if no filename specified. else Filename=$1 fi #+ Filename=${1:−names.data} # can replace the above test (parameter substitution). count=0 echo while [ "$name" != Smith ] do read name echo $name let "count += 1" done <"$Filename" # ^^^^^^^^^^^^ # Why is variable $name in quotes? # Reads from $Filename, rather than stdin. # Redirects stdin to file $Filename. echo; echo "$count names read"; echo # Note that in some older shell scripting languages, #+ the redirected loop would run as a subshell. # Therefore, $count would return 0, the initialized value outside the loop. # Bash and ksh avoid starting a subshell whenever possible, # +so that this script, for example, runs correctly. # # Thanks to Heiner Steven for pointing this out. exit 0 Example 16−5. Alternate form of redirected while loop #!/bin/bash Chapter 16. I/O Redirection 263 Advanced Bash−Scripting Guide # This is an alternate form of the preceding script. # Suggested by Heiner Steven #+ as a workaround in those situations when a redirect loop #+ runs as a subshell, and therefore variables inside the loop # +do not keep their values upon loop termination. if [ −z "$1" ] then Filename=names.data else Filename=$1 fi # Default, if no filename specified. exec 3<&0 exec 0<"$Filename" count=0 echo # Save stdin to file descriptor 3. # Redirect standard input. while [ "$name" != Smith ] do read name # Reads from redirected stdin ($Filename). echo $name let "count += 1" done # Loop reads from file $Filename #+ because of line 20. # The original version of this script terminated the "while" loop with #+ done <"$Filename" # Exercise: # Why is this unnecessary? exec 0<&3 exec 3<&− # Restore old stdin. # Close temporary fd 3. echo; echo "$count names read"; echo exit 0 Example 16−6. Redirected until loop #!/bin/bash # Same as previous example, but with "until" loop. if [ −z "$1" ] then Filename=names.data else Filename=$1 fi # while [ "$name" != Smith ] until [ "$name" = Smith ] do read name # Default, if no filename specified. # Change != to =. # Reads from $Filename, rather than stdin. Chapter 16. I/O Redirection 264 Advanced Bash−Scripting Guide echo $name done <"$Filename" # ^^^^^^^^^^^^ # Redirects stdin to file $Filename. # Same results as with "while" loop in previous example. exit 0 Example 16−7. Redirected for loop #!/bin/bash if [ −z "$1" ] then Filename=names.data else Filename=$1 fi # Default, if no filename specified. line_count=`wc $Filename | awk '{ print $1 }'` # Number of lines in target file. # # Very contrived and kludgy, nevertheless shows that #+ it's possible to redirect stdin within a "for" loop... #+ if you're clever enough. # # More concise is line_count=$(wc −l < "$Filename") for name in `seq $line_count` # while [ "$name" != Smith ] do read name echo $name if [ "$name" = Smith ] then break fi done <"$Filename" # ^^^^^^^^^^^^ exit 0 # Recall that "seq" prints sequence of numbers. −− more complicated than a "while" loop −− # Reads from $Filename, rather than stdin. # Need all this extra baggage here. # Redirects stdin to file $Filename. We can modify the previous example to also redirect the output of the loop. Example 16−8. Redirected for loop (both stdin and stdout redirected) #!/bin/bash if [ −z "$1" ] then Filename=names.data else Filename=$1 fi Savefile=$Filename.new # Default, if no filename specified. # Filename to save results in. Chapter 16. I/O Redirection 265 Advanced Bash−Scripting Guide FinalName=Jonah # Name to terminate "read" on. # Number of lines in target file. line_count=`wc $Filename | awk '{ print $1 }'` for name in `seq $line_count` do read name echo "$name" if [ "$name" = "$FinalName" ] then break fi done < "$Filename" > "$Savefile" # ^^^^^^^^^^^^^^^^^^^^^^^^^^^ exit 0 # Redirects stdin to file $Filename, and saves it to backup file. Example 16−9. Redirected if/then test #!/bin/bash if [ −z "$1" ] then Filename=names.data else Filename=$1 fi TRUE=1 if [ "$TRUE" ] then read name echo $name fi <"$Filename" # ^^^^^^^^^^^^ # if true and if : also work. # Default, if no filename specified. # Reads only first line of file. # An "if/then" test has no way of iterating unless embedded in a loop. exit 0 Example 16−10. Data file "names.data" for above examples Aristotle Belisarius Capablanca Euler Goethe Hamurabi Jonah Laplace Maroczy Purcell Schmidt Semmelweiss Smith Chapter 16. I/O Redirection 266 Advanced Bash−Scripting Guide Turing Venn Wilson Znosko−Borowski # This is a data file for #+ "redir2.sh", "redir3.sh", "redir4.sh", "redir4a.sh", "redir5.sh". Redirecting the stdout of a code block has the effect of saving its output to a file. See Example 3−2. Here documents are a special case of redirected code blocks. 16.3. Applications Clever use of I/O redirection permits parsing and stitching together snippets of command output (see Example 11−6). This permits generating report and log files. Example 16−11. Logging events #!/bin/bash # logevents.sh, by Stephane Chazelas. # Event logging to a file. # Must be run as root (for write access in /var/log). ROOT_UID=0 E_NOTROOT=67 # Only users with $UID 0 have root privileges. # Non−root exit error. if [ "$UID" −ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi FD_DEBUG1=3 FD_DEBUG2=4 FD_DEBUG3=5 # Uncomment one of the two lines below to activate script. # LOG_EVENTS=1 # LOG_VARS=1 log() # Writes time and date to log file. { echo "$(date) $*" >&7 # This *appends* the date to the file. # See below. } case $LOG_LEVEL in 1) exec 3>&2 2) exec 3>&2 3) exec 3>&2 4> /dev/null 5> /dev/null;; 4>&2 5> /dev/null;; 4>&2 5>&2;; Chapter 16. I/O Redirection 267 Advanced Bash−Scripting Guide *) exec 3> /dev/null 4> /dev/null 5> /dev/null;; esac FD_LOGVARS=6 if [[ $LOG_VARS ]] then exec 6>> /var/log/vars.log else exec 6> /dev/null fi # Bury output. FD_LOGEVENTS=7 if [[ $LOG_EVENTS ]] then # then exec 7 >(exec gawk '{print strftime(), $0}' >> /var/log/event.log) # Above line will not work in Bash, version 2.04. exec 7>> /var/log/event.log # Append to "event.log". log # Write time and date. else exec 7> /dev/null # Bury output. fi echo "DEBUG3: beginning" >&${FD_DEBUG3} ls −l >&5 2>&4 echo "Done" echo "sending mail" >&${FD_LOGEVENTS} # command1 >&5 2>&4 # command2 # Writes "sending mail" to fd #7. exit 0 Chapter 16. I/O Redirection 268 Chapter 17. Here Documents A here document is a special−purpose code block. It uses a form of I/O redirection to feed a command list to an interactive program or command, such as ftp, telnet, or ex. COMMAND <. # Bram Moolenaar points out that this may not work with 'vim', #+ because of possible problems with terminal interaction. exit 0 The above script could just as effectively have been implemented with ex, rather than vi. Here documents containing a list of ex commands are common enough to form their own category, known as ex scripts. Example 17−2. broadcast: Sends message to everyone logged in #!/bin/bash wall < $Newfile < $OUTFILE # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Quoting the 'limit string' prevents variable expansion #+ within the body of the above 'here document.' # This permits outputting literal strings in the output file. if [ −f "$OUTFILE" ] then chmod 755 $OUTFILE # Make the generated file executable. else echo "Problem in creating file: \"$OUTFILE\"" fi # This method can also be used for generating #+ C programs, Perl programs, Python programs, Makefiles, #+ and the like. exit 0 It is possible to set a variable from the output of a here document. variable=$(cat < EOF lsof 1213 bozo 0r REG 3,5 0 30386 /tmp/t1213−0−sh (deleted) Some utilities will not work inside a here document. The closing limit string, on the final line of a here document, must start in the first character position. There can be no leading whitespace. Trailing whitespace after the limit string likewise causes unexpected behavior. The whitespace prevents the limit string from being recognized. #!/bin/bash echo "−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−" cat < −− mark word boundaries. The angle brackets must be escaped, since otherwise they have only their literal character meaning. "\" matches the word "the", but not the words "them", "there", "other", etc. bash$ cat textfile This is line 1, of which there is only one instance. This is the only instance of line 2. This is line 3, another line. This is line 4. • bash$ grep 'the' textfile This is line 1, of which there is only one instance. This is the only instance of line 2. This is line 3, another line. bash$ grep '\' textfile This is the only instance of line 2. • Extended REs. Used in egrep, awk, and Perl • The question mark −− ? −− matches zero or one of the previous RE. It is generally used for matching single characters. • The plus −− + −− matches one or more of the previous RE. It serves a role similar to the *, but does not match zero occurrences. # GNU versions of sed and awk can use "+", # but it needs to be escaped. echo a111b | sed −ne '/a1\+b/p' echo a111b | grep 'a1\+b' echo a111b | gawk '/a1+b/' # All of above are equivalent. # Thanks, S.C. • Escaped "curly brackets" −− \{ \} −− indicate the number of occurrences of a preceding RE to match. It is necessary to escape the curly brackets since they have only their literal character meaning otherwise. This usage is technically not part of the basic RE set. "[0−9]\{5\}" matches exactly five digits (characters in the range of 0 to 9). Chapter 19. Regular Expressions 281 Advanced Bash−Scripting Guide Curly brackets are not available as an RE in the "classic" (non−POSIX compliant) version of awk. However, gawk has the −−re−interval option that permits them (without being escaped). bash$ echo 2222 | gawk −−re−interval '/2{3}/' 2222 Perl and some egrep versions do not require escaping the curly brackets. • Parentheses −− ( ) −− enclose groups of REs. They are useful with the following "|" operator and in substring extraction using expr. • The −− | −− "or" RE operator matches any of a set of alternate characters. bash$ egrep 're(a|e)d' misc.txt People who read seem to be better informed than those who do not. The clarinet produces sound by the vibration of its reed. Some versions of sed, ed, and ex support escaped versions of the extended Regular Expressions described above, as do the GNU utilities. • POSIX Character Classes. [:class:] This is an alternate method of specifying a range of characters to match. • [:alnum:] matches alphabetic or numeric characters. This is equivalent to A−Za−z0−9. • [:alpha:] matches alphabetic characters. This is equivalent to A−Za−z. • [:blank:] matches a space or a tab. • [:cntrl:] matches control characters. • [:digit:] matches (decimal) digits. This is equivalent to 0−9. • [:graph:] (graphic printable characters). Matches characters in the range of ASCII 33 − 126. This is the same as [:print:], below, but excluding the space character. • [:lower:] matches lowercase alphabetic characters. This is equivalent to a−z. • [:print:] (printable characters). Matches characters in the range of ASCII 32 − 126. This is the same as [:graph:], above, but adding the space character. • [:space:] matches whitespace characters (space and horizontal tab). • [:upper:] matches uppercase alphabetic characters. This is equivalent to A−Z. • [:xdigit:] matches hexadecimal digits. This is equivalent to 0−9A−Fa−f. POSIX character classes generally require quoting or double brackets ([[ ]]). bash$ grep [[:digit:]] test.file abc=723 These character classes may even be used with globbing, to a limited extent. bash$ ls −l ?[[:digit:]][[:digit:]]? −rw−rw−r−− 1 bozo bozo 0 Aug 21 14:47 a33b To see POSIX character classes used in scripts, refer to Example 12−17 and Example 12−18. Chapter 19. Regular Expressions 282 Advanced Bash−Scripting Guide Sed, awk, and Perl, used as filters in scripts, take REs as arguments when "sifting" or transforming files or I/O streams. See Example A−13 and Example A−18 for illustrations of this. The standard reference on this complex topic is Friedl's "Mastering Regular Expressions." "Sed & Awk," by Dougherty and Robbins also gives a very lucid treatment of REs. See the Bibliography for more information on these books. 19.2. Globbing Bash itself cannot recognize Regular Expressions. In scripts, commands and utilities, such as sed and awk, interpret RE's. Bash does carry out filename expansion, a process known as "globbing," but this does not use the standard RE set. Instead, globbing recognizes and expands wildcards. Globbing interprets the standard wildcard characters, * and ?, character lists in square brackets, and certain other special characters (such as ^ for negating the sense of a match). There are some important limitations on wildcard characters in globbing, however. Strings containing * will not match filenames that start with a dot, as, for example, .bashrc. [50] Likewise, the ? has a different meaning in globbing than as part of an RE. bash$ ls −l total 2 −rw−rw−r−− −rw−rw−r−− −rw−rw−r−− −rw−rw−r−− −rw−rw−r−− 1 1 1 1 1 bozo bozo bozo bozo bozo bozo bozo bozo bozo bozo 0 0 0 466 758 Aug 6 Aug 6 Aug 6 Aug 6 Jul 30 18:42 18:42 18:42 17:48 09:02 a.1 b.1 c.1 t2.sh test1.txt bash$ ls −l t?.sh −rw−rw−r−− 1 bozo bozo 466 Aug 6 17:48 t2.sh bash$ ls −l [ab]* −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo bash$ ls −l [a−c]* −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo bash$ ls −l [^ab]* −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo bash$ ls −l {b*,c*,*est*} −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo −rw−rw−r−− 1 bozo bozo 0 Aug 6 18:42 a.1 0 Aug 6 18:42 b.1 0 Aug 6 18:42 a.1 0 Aug 6 18:42 b.1 0 Aug 6 18:42 c.1 0 Aug 6 18:42 c.1 466 Aug 6 17:48 t2.sh 758 Jul 30 09:02 test1.txt 0 Aug 6 18:42 b.1 0 Aug 6 18:42 c.1 758 Jul 30 09:02 test1.txt Bash performs filename expansion on unquoted command−line arguments. The echo command demonstrates this. bash$ echo * a.1 b.1 c.1 t2.sh test1.txt Chapter 19. Regular Expressions 283 Advanced Bash−Scripting Guide bash$ echo t* t2.sh test1.txt It is possible to modify the way Bash interprets special characters in globbing. A set −f command disables globbing, and the nocaseglob and nullglob options to shopt change globbing behavior. See also Example 10−4. Chapter 19. Regular Expressions 284 Chapter 20. Subshells Running a shell script launches another instance of the command processor. Just as your commands are interpreted at the command line prompt, similarly does a script batch process a list of commands in a file. Each shell script running is, in effect, a subprocess of the parent shell, the one that gives you the prompt at the console or in an xterm window. A shell script can also launch subprocesses. These subshells let the script do parallel processing, in effect executing multiple subtasks simultaneously. In general, an external command in a script forks off a subprocess, whereas a Bash builtin does not. For this reason, builtins execute more quickly than their external command equivalents. Command List in Parentheses ( command1; command2; command3; ... ) A command list embedded between parentheses runs as a subshell. Variables in a subshell are not visible outside the block of code in the subshell. They are not accessible to the parent process, to the shell that launched the subshell. These are, in effect, local variables. Example 20−1. Variable scope in a subshell #!/bin/bash # subshell.sh echo outer_variable=Outer ( inner_variable=Inner echo "From subshell, \"inner_variable\" = $inner_variable" echo "From subshell, \"outer\" = $outer_variable" ) echo if [ −z "$inner_variable" ] then echo "inner_variable undefined in main body of shell" else echo "inner_variable defined in main body of shell" fi echo "From main body of shell, \"inner_variable\" = $inner_variable" # $inner_variable will show as uninitialized because # variables defined in a subshell are "local variables". echo Chapter 20. Subshells 285 Advanced Bash−Scripting Guide exit 0 See also Example 32−2. + Directory changes made in a subshell do not carry over to the parent shell. Example 20−2. List User Profiles #!/bin/bash # allprofs.sh: print all user profiles # This script written by Heiner Steven, and modified by the document author. FILE=.bashrc # File containing user profile, #+ was ".profile" in original script. for home in `awk −F: '{print $6}' /etc/passwd` do [ −d "$home" ] || continue # If no home directory, go to next. [ −r "$home" ] || continue # If not readable, go to next. (cd $home; [ −e $FILE ] && less $FILE) done # When script terminates, there is no need to 'cd' back to original directory, #+ because 'cd $home' takes place in a subshell. exit 0 A subshell may be used to set up a "dedicated environment" for a command group. COMMAND1 COMMAND2 COMMAND3 ( IFS=: PATH=/bin unset TERMINFO set −C shift 5 COMMAND4 COMMAND5 exit 3 # Only exits the subshell. ) # The parent shell has not been affected, and the environment is preserved. COMMAND6 COMMAND7 One application of this is testing whether a variable is defined. if (set −u; : $variable) 2> /dev/null then echo "Variable is set." fi # Variable has been set in current script, #+ or is an an internal Bash variable, #+ or is present in environment (has been exported). Chapter 20. Subshells 286 Advanced Bash−Scripting Guide # # # # Could also be written [[ ${variable−x} != x || ${variable−y} != y ]] or [[ ${variable−x} != x$variable ]] or [[ ${variable+x} = x ]]) or [[ ${variable−x} != x ]]) Another application is checking for a lock file: if (set −C; : > lock_file) 2> /dev/null if (set −C; : > lock_file) 2> /dev/null then : # lock_file didn't exist: no user running the script else echo "Another user is already running that script." exit 65 fi # Code snippet by Stephane Chazelas, #+ with modifications by Paulo Marcel Coelho Aragao. Processes may execute in parallel within different subshells. This permits breaking a complex task into subcomponents processed concurrently. Example 20−3. Running parallel processes in subshells (cat list1 list2 list3 | sort | uniq > list123) & (cat list4 list5 list6 | sort | uniq > list456) & # Merges and sorts both sets of lists simultaneously. # Running in background ensures parallel execution. # # Same effect as # cat list1 list2 list3 | sort | uniq > list123 & # cat list4 list5 list6 | sort | uniq > list456 & wait # Don't execute the next command until subshells finish. diff list123 list456 Redirecting I/O to a subshell uses the "|" pipe operator, as in ls −al | (command). A command block between curly braces does not launch a subshell. { command1; command2; command3; ... } Chapter 20. Subshells 287 Chapter 21. Restricted Shells Disabled commands in restricted shells Running a script or portion of a script in restricted mode disables certain commands that would otherwise be available. This is a security measure intended to limit the privileges of the script user and to minimize possible damage from running the script. Using cd to change the working directory. Changing the values of the $PATH, $SHELL, $BASH_ENV, or $ENV environmental variables. Reading or changing the $SHELLOPTS, shell environmental options. Output redirection. Invoking commands containing one or more /'s. Invoking exec to substitute a different process for the shell. Various other commands that would enable monkeying with or attempting to subvert the script for an unintended purpose. Getting out of restricted mode within the script. Example 21−1. Running a script in restricted mode #!/bin/bash # Starting the script with "#!/bin/bash −r" # runs entire script in restricted mode. echo echo "Changing directory." cd /usr/local echo "Now in `pwd`" echo "Coming back home." cd echo "Now in `pwd`" echo # Everything up to here in normal, unrestricted mode. set −r # set −−restricted has same effect. echo "==> Now in restricted mode. <==" echo echo echo "Attempting directory change in restricted mode." cd .. echo "Still in `pwd`" echo echo echo "\$SHELL = $SHELL" echo "Attempting to change shell in restricted mode." SHELL="/bin/ash" echo echo "\$SHELL= $SHELL" echo echo Chapter 21. Restricted Shells 288 Advanced Bash−Scripting Guide echo "Attempting to redirect output in restricted mode." ls −l /usr/bin > bin.files ls −l bin.files # Try to list attempted file creation effort. echo exit 0 Chapter 21. Restricted Shells 289 Chapter 22. Process Substitution Process substitution is the counterpart to command substitution. Command substitution sets a variable to the result of a command, as in dir_contents=`ls −al` or xref=$( grep word datafile). Process substitution feeds the output of a process to another process (in other words, it sends the results of a command to another command). Command substitution template command within parentheses >(command) <(command) These initiate process substitution. This uses /dev/fd/ files to send the results of the process within parentheses to another process. [51] There is no space between the the "<" or ">" and the parentheses. Space there would give an error message. bash$ echo >(true) /dev/fd/63 bash$ echo <(true) /dev/fd/63 Bash creates a pipe with two file descriptors, −−fIn and fOut−−. The stdin of true connects to fOut (dup2(fOut, 0)), then Bash passes a /dev/fd/fIn argument to echo. On systems lacking /dev/fd/ files, Bash may use temporary files. (Thanks, S.C.) Process substitution can compare the output of two different commands, or even the output of different options to the same command. bash$ comm <(ls −l) <(ls −al) total 12 −rw−rw−r−− 1 bozo bozo 78 Mar 10 12:58 File0 −rw−rw−r−− 1 bozo bozo 42 Mar 10 12:58 File2 −rw−rw−r−− 1 bozo bozo 103 Mar 10 12:58 t2.sh total 20 drwxrwxrwx 2 bozo bozo 4096 Mar 10 18:10 . drwx−−−−−− 72 bozo bozo 4096 Mar 10 17:58 .. −rw−rw−r−− 1 bozo bozo 78 Mar 10 12:58 File0 −rw−rw−r−− 1 bozo bozo 42 Mar 10 12:58 File2 −rw−rw−r−− 1 bozo bozo 103 Mar 10 12:58 t2.sh Using process substitution to compare the contents of two directories (to see which filenames are in one, but not the other): diff <(ls $first_directory) <(ls $second_directory) Some other usages and uses of process substitution: Chapter 22. Process Substitution 290 Advanced Bash−Scripting Guide cat <(ls −l) # Same as ls −l | cat sort −k 9 <(ls −l /bin) <(ls −l /usr/bin) <(ls −l /usr/X11R6/bin) # Lists all the files in the 3 main 'bin' directories, and sorts by filename. # Note that three (count 'em) distinct commands are fed to 'sort'. diff <(command1) <(command2) # Gives difference in command output. tar cf >(bzip2 −c > file.tar.bz2) $directory_name # Calls "tar cf /dev/fd/?? $directory_name", and "bzip2 −c > file.tar.bz2". # # Because of the /dev/fd/ system feature, # the pipe between both commands does not need to be named. # # This can be emulated. # bzip2 −c < pipe > file.tar.bz2& tar cf pipe $directory_name rm pipe # or exec 3>&1 tar cf /dev/fd/4 $directory_name 4>&1 >&3 3>&− | bzip2 −c > file.tar.bz2 3>&− exec 3>&− # Thanks, Stepane Chazelas A reader of this document sent in the following interesting example of process substitution. # Script fragment taken from SuSE distribution: while read des what mask iface; do # Some commands ... done < <(route −n) # To test it, let's make it do something. while read des what mask iface; do echo $des $what $mask $iface done < <(route −n) # # # # Output: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo # As S.C. points out, an easier−to−understand equivalent is: route −n | while read des what mask iface; do # Variables set from output of pipe. echo $des $what $mask $iface done # This yields the same output as above. # However, as Ulrich Gayer points out . . . #+ this simplified equivalent uses a subshell for the while loop, #+ and therefore the variables disappear when the pipe terminates. Chapter 22. Process Substitution 291 Chapter 23. Functions Like "real" programming languages, Bash has functions, though in a somewhat limited implementation. A function is a subroutine, a code block that implements a set of operations, a "black box" that performs a specified task. Wherever there is repetitive code, when a task repeats with only slight variations, then consider using a function. function function_name { command... } or function_name () { command... } This second form will cheer the hearts of C programmers (and is more portable). As in C, the function's opening bracket may optionally appear on the second line. function_name () { command... } Functions are called, triggered, simply by invoking their names. Example 23−1. Simple functions #!/bin/bash JUST_A_SECOND=1 funky () { # This is about as simple as functions get. echo "This is a funky function." echo "Now exiting funky function." } # Function declaration must precede call. fun () { # A somewhat more complex function. i=0 REPEATS=30 echo echo "And now the fun really begins." echo sleep $JUST_A_SECOND # Hey, wait a second! while [ $i −lt $REPEATS ] Chapter 23. Functions 292 Advanced Bash−Scripting Guide do echo "−−−−−−−−−−FUNCTIONS−−−−−−−−−−>" echo "<−−−−−−−−−−−−ARE−−−−−−−−−−−−−" echo "<−−−−−−−−−−−−FUN−−−−−−−−−−−−>" echo let "i+=1" done } # Now, call the functions. funky fun exit 0 The function definition must precede the first call to it. There is no method of "declaring" the function, as, for example, in C. f1 # Will give an error message, since function "f1" not yet defined. declare −f f1 f1 # However... # This doesn't help either. # Still an error message. f1 () { echo "Calling function \"f2\" from within function \"f1\"." f2 } f2 () { echo "Function \"f2\"." } f1 # Function "f2" is not actually called until this point, #+ although it is referenced before its definition. # This is permissable. # Thanks, S.C. It is even possible to nest a function within another function, although this is not very useful. f1 () { f2 () # nested { echo "Function \"f2\", inside \"f1\"." } } f2 # # Gives an error message. Even a preceding "declare −f f2" wouldn't help. Chapter 23. Functions 293 Advanced Bash−Scripting Guide echo f1 f2 # Does nothing, since calling "f1" does not automatically call "f2". # Now, it's all right to call "f2", #+ since its definition has been made visible by calling "f1". # Thanks, S.C. Function declarations can appear in unlikely places, even where a command would otherwise go. ls −l | foo() { echo "foo"; } # Permissable, but useless. if [ "$USER" = bozo ] then bozo_greet () # Function definition embedded in an if/then construct. { echo "Hello, Bozo." } fi bozo_greet # Works only for Bozo, and other users get an error. # Something like this might be useful in some contexts. NO_EXIT=1 # Will enable function definition below. [[ $NO_EXIT −eq 1 ]] && exit() { true; } # Function definition in an "and−list". # If $NO_EXIT is 1, declares "exit ()". # This disables the "exit" builtin by aliasing it to "true". exit # Invokes "exit ()" function, not "exit" builtin. # Thanks, S.C. 23.1. Complex Functions and Function Complexities Functions may process arguments passed to them and return an exit status to the script for further processing. function_name $arg1 $arg2 The function refers to the passed arguments by position (as if they were positional parameters), that is, $1, $2, and so forth. Example 23−2. Function Taking Parameters #!/bin/bash # Functions and parameters DEFAULT=default func2 () { if [ −z "$1" ] then # Default param value. # Is parameter #1 zero length? Chapter 23. Functions 294 Advanced Bash−Scripting Guide echo "−Parameter #1 is zero length.−" else echo "−Param #1 is \"$1\".−" fi variable=${1−$DEFAULT} echo "variable = $variable" # Or no parameter passed. # #+ # # #+ What does parameter substitution show? −−−−−−−−−−−−−−−−−−−−−−−−−−− It distinguishes between no param and a null param. if [ "$2" ] then echo "−Parameter #2 is \"$2\".−" fi return 0 } echo echo "Nothing passed." func2 echo # Called with no params echo "Zero−length parameter passed." func2 "" # Called with zero−length param echo echo "Null parameter passed." func2 "$uninitialized_param" echo # Called with uninitialized param echo "One parameter passed." func2 first # Called with one param echo echo "Two parameters passed." func2 first second # Called with two params echo echo "\"\" \"second\" passed." func2 "" second # Called with zero−length first parameter echo # and ASCII string as a second one. exit 0 The shift command works on arguments passed to functions (see Example 34−11). In contrast to certain other programming languages, shell scripts normally pass only value parameters to functions. Variable names (which are actually pointers), if passed as parameters to functions, will be treated as string literals. Functions interpret their arguments literally. Indirect variable references (see Example 35−2) provide a clumsy sort of mechanism for passing variable pointers to functions. Example 23−3. Passing an indirect reference to a function Chapter 23. Functions 295 Advanced Bash−Scripting Guide #!/bin/bash # ind−func.sh: Passing an indirect reference to a function. echo_var () { echo "$1" } message=Hello Hello=Goodbye echo_var "$message" # Hello # Now, let's pass an indirect reference to the function. echo_var "${!message}" # Goodbye echo "−−−−−−−−−−−−−" # What happens if we change the contents of "hello" variable? Hello="Hello, again!" echo_var "$message" # Hello echo_var "${!message}" # Hello, again! exit 0 The next logical question is whether parameters can be dereferenced after being passed to a function. Example 23−4. Dereferencing a parameter passed to a function #!/bin/bash # dereference.sh # Dereferencing parameter passed to a function. # Script by Bruce W. Clare. dereference () { y=\$"$1" echo $y # Name of variable. # $Junk x=`eval "expr \"$y\" "` echo $1=$x eval "$1=\"Some Different Text \"" } Junk="Some Text" echo $Junk "before" dereference Junk echo $Junk "after" exit 0 # Assign new value. # Some Text before # Some Different Text after Example 23−5. Again, dereferencing a parameter passed to a function #!/bin/bash # ref−params.sh: Dereferencing a parameter passed to a function. # (Complex Example) Chapter 23. Functions 296 Advanced Bash−Scripting Guide ITERATIONS=3 icount=1 # How many times to get input. my_read () { # Called with my_read varname, #+ outputs the previous value between brackets as the default value, #+ then asks for a new value. local local_var echo −n "Enter a value " eval 'echo −n "[$'$1'] "' # eval echo −n "[\$$1] " # Previous value. # Easier to understand, #+ but loses trailing space in user prompt. read local_var [ −n "$local_var" ] && eval $1=\$local_var # "And−list": if "local_var" then set "$1" to its value. } echo while [ "$icount" −le "$ITERATIONS" ] do my_read var echo "Entry #$icount = $var" let "icount += 1" echo done # Thanks to Stephane Chazelas for providing this instructive example. exit 0 Exit and Return exit status Functions return a value, called an exit status. The exit status may be explicitly specified by a return statement, otherwise it is the exit status of the last command in the function (0 if successful, and a non−zero error code if not). This exit status may be used in the script by referencing it as $?. This mechanism effectively permits script functions to have a "return value" similar to C functions. return Terminates a function. A return command [52] optionally takes an integer argument, which is returned to the calling script as the "exit status" of the function, and this exit status is assigned to the variable $?. Example 23−6. Maximum of two numbers #!/bin/bash # max.sh: Maximum of two integers. E_PARAM_ERR=−198 EQUAL=−199 max2 () # If less than 2 params passed to function. # Return value if both params equal. # Returns larger of two numbers. Chapter 23. Functions 297 Advanced Bash−Scripting Guide { # Note: numbers compared must be less than 257. if [ −z "$2" ] then return $E_PARAM_ERR fi if [ "$1" −eq "$2" ] then return $EQUAL else if [ "$1" −gt "$2" ] then return $1 else return $2 fi fi } max2 33 34 return_val=$? if [ "$return_val" −eq $E_PARAM_ERR ] then echo "Need to pass two parameters to the function." elif [ "$return_val" −eq $EQUAL ] then echo "The two numbers are equal." else echo "The larger of the two numbers is $return_val." fi exit 0 # # # #+ Exercise (easy): −−−−−−−−−−−−−−− Convert this to an interactive script, that is, have the script ask for input (two numbers). For a function to return a string or array, use a dedicated variable. count_lines_in_etc_passwd() { [[ −r /etc/passwd ]] && REPLY=$(echo $(wc −l < /etc/passwd)) # If /etc/passwd is readable, set REPLY to line count. # Returns both a parameter value and status information. # The 'echo' seems unnecessary, but . . . #+ it removes excess whitespace from the output. } if count_lines_in_etc_passwd then echo "There are $REPLY lines in /etc/passwd." else echo "Cannot count lines in /etc/passwd." fi # Thanks, S.C. Chapter 23. Functions 298 Advanced Bash−Scripting Guide Example 23−7. Converting numbers to Roman numerals #!/bin/bash # Arabic number to Roman numeral conversion # Range: 0 − 200 # It's crude, but it works. # Extending the range and otherwise improving the script is left as an exercise. # Usage: roman number−to−convert LIMIT=200 E_ARG_ERR=65 E_OUT_OF_RANGE=66 if [ −z "$1" ] then echo "Usage: `basename $0` number−to−convert" exit $E_ARG_ERR fi num=$1 if [ "$num" −gt $LIMIT ] then echo "Out of range!" exit $E_OUT_OF_RANGE fi to_roman () # Must declare function before first call to it. { number=$1 factor=$2 rchar=$3 let "remainder = number − factor" while [ "$remainder" −ge 0 ] do echo −n $rchar let "number −= factor" let "remainder = number − factor" done return $number # Exercise: # −−−−−−−− # Explain how this function works. # Hint: division by successive subtraction. } to_roman num=$? to_roman num=$? to_roman num=$? to_roman num=$? to_roman num=$? to_roman num=$? $num 100 C $num 90 LXXXX $num 50 L $num 40 XL $num 10 X $num 9 IX Chapter 23. Functions 299 Advanced Bash−Scripting Guide to_roman $num 5 V num=$? to_roman $num 4 IV num=$? to_roman $num 1 I echo exit 0 See also Example 10−28. The largest positive integer a function can return is 255. The return command is closely tied to the concept of exit status, which accounts for this particular limitation. Fortunately, there are various workarounds for those situations requiring a large integer return value from a function. Example 23−8. Testing large return values in a function #!/bin/bash # return−test.sh # The largest positive value a function can return is 255. return_test () { return $1 } return_test 27 echo $? return_test 255 echo $? return_test 257 echo $? # Returns whatever passed to it. # o.k. # Returns 27. # Still o.k. # Returns 255. # Error! # Returns 1 (return code for miscellaneous error). # ====================================================== return_test −151896 # Do large negative numbers work? echo $? # Will this return −151896? # No! It returns 168. # Version of Bash before 2.05b permitted #+ large negative integer return values. # Newer versions of Bash plug this loophole. # This may break older scripts. # Caution! # ====================================================== exit 0 A workaround for obtaining large integer "return values" is to simply assign the "return value" to a global variable. Return_Val= # Global variable to hold oversize return value of function. alt_return_test () Chapter 23. Functions 300 Advanced Bash−Scripting Guide { fvar=$1 Return_Val=$fvar return # Returns 0 (success). } alt_return_test 1 echo $? echo "return value = $Return_Val" alt_return_test 256 echo "return value = $Return_Val" alt_return_test 257 echo "return value = $Return_Val" alt_return_test 25701 echo "return value = $Return_Val" #0 #1 # 256 # 257 #25701 An even more elegant method is to simply have the function echo its "return value to stdout," and to then capture it by command substitution. See the discussion of this in Section 34.7. Example 23−9. Comparing two large integers #!/bin/bash # max2.sh: Maximum of two LARGE integers. # This is the previous "max.sh" example, #+ modified to permit comparing large integers. EQUAL=0 E_PARAM_ERR=−99999 # Return value if both params equal. # Not enough params passed to function. max2 () # "Returns" larger of two numbers. { if [ −z "$2" ] then echo $E_PARAM_ERR return fi if [ "$1" −eq "$2" ] then echo $EQUAL return else if [ "$1" −gt "$2" ] then retval=$1 else retval=$2 fi fi echo $retval } # Echoes (to stdout), rather than returning value. Chapter 23. Functions 301 Advanced Bash−Scripting Guide return_val=$(max2 33001 33997) # This is actually a form of command substitution: #+ treating a function as if it were a command, #+ and assigning the stdout of the function to the variable 'return_val.' # ========================= OUTPUT ======================== if [ "$return_val" −eq "$E_PARAM_ERR" ] then echo "Error in parameters passed to comparison function!" elif [ "$return_val" −eq "$EQUAL" ] then echo "The two numbers are equal." else echo "The larger of the two numbers is $return_val." fi # ========================================================= exit 0 # # # #+ # # Exercises: −−−−−−−−− 1) Find a more elegant way of testing the parameters passed to the function. 2) Simplify the if/then structure at "OUTPUT." 3) Rewrite the script to take input from command−line parameters. See also Example A−8. Exercise: Using what we have just learned, extend the previous Roman numerals example to accept arbitrarily large input. Redirection Redirecting the stdin of a function A function is essentially a code block, which means its stdin can be redirected (as in Example 3−1). Example 23−10. Real name from username #!/bin/bash # From username, gets "real name" from /etc/passwd. ARGCOUNT=1 # Expect one arg. E_WRONGARGS=65 file=/etc/passwd pattern=$1 if [ $# −ne "$ARGCOUNT" ] then echo "Usage: `basename $0` USERNAME" exit $E_WRONGARGS fi file_excerpt () # Scan file for pattern, the print relevant portion of line. Chapter 23. Functions 302 Advanced Bash−Scripting Guide { while read line # while does not necessarily need "[ condition]" do echo "$line" | grep $1 | awk −F":" '{ print $5 }' # Have awk use ":" delimiter. done } <$file # Redirect into function's stdin. file_excerpt $pattern # # # # # # # Yes, this entire script could be reduced to grep PATTERN /etc/passwd | awk −F":" '{ print $5 }' or awk −F: '/PATTERN/ {print $5}' or awk −F: '($1 == "username") { print $5 }' # real name from username However, it might not be as instructive. exit 0 There is an alternative, and perhaps less confusing method of redirecting a function's stdin. This involves redirecting the stdin to an embedded bracketed code block within the function. # Instead of: Function () { ... } < file # Try this: Function () { { ... } < file } # Similarly, Function () # This works. { { echo $* } | tr a b } Function () { echo $* } | tr a b # This doesn't work. # A nested code block is mandatory here. # Thanks, S.C. 23.2. Local Variables What makes a variable "local"? local variables Chapter 23. Functions 303 Advanced Bash−Scripting Guide A variable declared as local is one that is visible only within the block of code in which it appears. It has local "scope". In a function, a local variable has meaning only within that function block. Example 23−11. Local variable visibility #!/bin/bash # Global and local variables inside a function. func () { local loc_var=23 # Declared as local variable. echo # Uses the 'local' builtin. echo "\"loc_var\" in function = $loc_var" global_var=999 # Not declared as local. # Defaults to global. echo "\"global_var\" in function = $global_var" } func # Now, to see if local variable "loc_var" exists outside function. echo echo "\"loc_var\" outside function = $loc_var" # $loc_var outside function = # No, $loc_var not visible globally. echo "\"global_var\" outside function = $global_var" # $global_var outside function = 999 # $global_var is visible globally. echo exit 0 # In contrast to C, a Bash variable declared inside a function #+ is local *only* if declared as such. Before a function is called, all variables declared within the function are invisible outside the body of the function, not just those explicitly declared as local. #!/bin/bash func () { global_var=37 } # Visible only within the function block #+ before the function has been called. # END OF FUNCTION # global_var = # Function "func" has not yet been called, #+ so $global_var is not visible here. echo "global_var = $global_var" func echo "global_var = $global_var" # global_var = 37 # Has been set by function call. Chapter 23. Functions 304 Advanced Bash−Scripting Guide 23.2.1. Local variables help make recursion possible. Local variables permit recursion, [53] but this practice generally involves much computational overhead and is definitely not recommended in a shell script. [54] Example 23−12. Recursion, using a local variable #!/bin/bash # # factorial −−−−−−−−− # Does bash permit recursion? # Well, yes, but... # You gotta have rocks in your head to try it. MAX_ARG=5 E_WRONG_ARGS=65 E_RANGE_ERR=66 if [ −z "$1" ] then echo "Usage: `basename $0` number" exit $E_WRONG_ARGS fi if [ "$1" −gt $MAX_ARG ] then echo "Out of range (5 is maximum)." # Let's get real now. # If you want greater range than this, # rewrite it in a real programming language. exit $E_RANGE_ERR fi fact () { local number=$1 # Variable "number" must be declared as local, # otherwise this doesn't work. if [ "$number" −eq 0 ] then factorial=1 # Factorial of 0 = 1. else let "decrnum = number − 1" fact $decrnum # Recursive function call. let "factorial = $number * $?" fi return $factorial } fact $1 echo "Factorial of $1 is $?." exit 0 Chapter 23. Functions 305 Advanced Bash−Scripting Guide See also Example A−17 for an example of recursion in a script. Be aware that recursion is resource−intensive and executes slowly, and is therefore generally not appropriate to use in a script. 23.3. Recursion Without Local Variables A function may recursively call itself even without use of local variables. Example 23−13. The Towers of Hanoi #! /bin/bash # # The Towers Of Hanoi # Bash script # Copyright (C) 2000 Amit Singh. All Rights Reserved. # http://hanoi.kernelthread.com # # Last tested under bash version 2.05b.0(13)−release # # Used in "Advanced Bash Scripting Guide" #+ with permission of script author. # Slightly modified and commented by ABS author. #=================================================================# # The Tower of Hanoi is an old mathematical puzzle. # There are three vertical posts set in a base. # The first post has a set of annular rings stacked on it. # These rings are flat disks with a hole drilled out of the center, #+ so they can slip over the posts. # The rings have different diameters, and they stack in descending #+ order, according to size. # The smallest ring is on top, and the largest on the bottom. # # The task is to transfer the stack of rings #+ to one of the other posts. # You can move only one ring at a time to another post. # You are permitted to move rings back to the original post. # You may place a smaller ring atop a larger one, #+ but *not* vice versa. # Again, it is forbidden to place a larger ring atop a smaller one. # # For a small number of rings, only a few moves are required. #+ For each additional ring, #+ the required number of moves approximately doubles, #+ and the "strategy" becomes increasingly complicated. # # For more information, see http://hanoi.kernelthread.com. # # # ... ... ... # || || || # _|_|_ || || # |_____| || || # |_______| || || # |_________| || || # |___________| || || # | | || || # .−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−. # |**************************************************************| Chapter 23. Functions 306 Advanced Bash−Scripting Guide # #1 #2 #3 # #=================================================================# E_NOPARAM=66 # No parameter passed to script. E_BADPARAM=67 # Illegal number of disks passed to script. Moves= # Global variable holding number of moves. # Modifications to original script. dohanoi() { # Recursive function. case $1 in 0) ;; *) dohanoi "$(($1−1))" $2 $4 $3 echo move $2 "−−>" $3 let "Moves += 1" # Modification to original script. dohanoi "$(($1−1))" $4 $3 $2 ;; esac } case $# in 1) case $(($1>0)) in # Must have at least one disk. 1) dohanoi $1 1 3 2 echo "Total moves = $Moves" exit 0; ;; *) echo "$0: illegal value for number of disks"; exit $E_BADPARAM; ;; esac ;; *) echo "usage: $0 N" echo " Where \"N\" is the number of disks." exit $E_NOPARAM; ;; esac # # # # # # Exercises: −−−−−−−−− 1) Would commands beyond this point ever be executed? Why not? (Easy) 2) Explain the workings of the workings of the "dohanoi" function. (Difficult) Chapter 23. Functions 307 Chapter 24. Aliases A Bash alias is essentially nothing more than a keyboard shortcut, an abbreviation, a means of avoiding typing a long command sequence. If, for example, we include alias lm="ls −l | more" in the ~/.bashrc file, then each lm typed at the command line will automatically be replaced by a ls −l | more. This can save a great deal of typing at the command line and avoid having to remember complex combinations of commands and options. Setting alias rm="rm −i" (interactive mode delete) may save a good deal of grief, since it can prevent inadvertently losing important files. In a script, aliases have very limited usefulness. It would be quite nice if aliases could assume some of the functionality of the C preprocessor, such as macro expansion, but unfortunately Bash does not expand arguments within the alias body. [55] Moreover, a script fails to expand an alias itself within "compound constructs", such as if/then statements, loops, and functions. An added limitation is that an alias will not expand recursively. Almost invariably, whatever we would like an alias to do could be accomplished much more effectively with a function. Example 24−1. Aliases within a script #!/bin/bash # Invoke with command line parameter to exercise last section of this script. shopt −s expand_aliases # Must set this option, else script will not expand aliases. # First, some fun. alias Jesse_James='echo "\"Alias Jesse James\" was a 1959 comedy starring Bob Hope."' Jesse_James echo; echo; echo; alias ll="ls −l" # May use either single (') or double (") quotes to define an alias. echo "Trying aliased \"ll\":" ll /usr/X11R6/bin/mk* #* Alias works. echo directory=/usr/X11R6/bin/ prefix=mk* # See if wild−card causes problems. echo "Variables \"directory\" + \"prefix\" = $directory$prefix" echo alias lll="ls −l $directory$prefix" echo "Trying aliased \"lll\":" lll # Long listing of all files in /usr/X11R6/bin stating with mk. # Alias handles concatenated variables, including wild−card o.k. TRUE=1 Chapter 24. Aliases 308 Advanced Bash−Scripting Guide echo if [ TRUE ] then alias rr="ls −l" echo "Trying aliased \"rr\" within if/then statement:" rr /usr/X11R6/bin/mk* #* Error message results! # Aliases not expanded within compound statements. echo "However, previously expanded alias still recognized:" ll /usr/X11R6/bin/mk* fi echo count=0 while [ $count −lt 3 ] do alias rrr="ls −l" echo "Trying aliased \"rrr\" within \"while\" loop:" rrr /usr/X11R6/bin/mk* #* Alias will not expand here either. # alias.sh: line 57: rrr: command not found let count+=1 done echo; echo alias xyz='cat $0' # Script lists itself. # Note strong quotes. xyz # This seems to work, #+ although the Bash documentation suggests that it shouldn't. # # However, as Steve Jacobson points out, #+ the "$0" parameter expands immediately upon declaration of the alias. exit 0 The unalias command removes a previously set alias. Example 24−2. unalias: Setting and unsetting an alias #!/bin/bash shopt −s expand_aliases alias llm='ls −al | more' llm echo unalias llm # Unset alias. llm # Error message results, since 'llm' no longer recognized. exit 0 bash$ ./unalias.sh total 6 drwxrwxr−x 2 bozo # Enables alias expansion. bozo 3072 Feb 6 14:04 . Chapter 24. Aliases 309 Advanced Bash−Scripting Guide drwxr−xr−x −rwxr−xr−x 40 bozo 1 bozo bozo bozo 2048 Feb 199 Feb 6 14:04 .. 6 14:04 unalias.sh ./unalias.sh: llm: command not found Chapter 24. Aliases 310 Chapter 25. List Constructs The "and list" and "or list" constructs provide a means of processing a number of commands consecutively. These can effectively replace complex nested if/then or even case statements. Chaining together commands and list command−1 && command−2 && command−3 && ... command−n Each command executes in turn provided that the previous command has given a return value of true (zero). At the first false (non−zero) return, the command chain terminates (the first command returning false is the last one to execute). Example 25−1. Using an "and list" to test for command−line arguments #!/bin/bash # "and list" if [ ! −z "$1" ] && echo "Argument #1 = $1" && [ ! −z "$2" ] && echo "Argument #2 = $2" then echo "At least 2 arguments passed to script." # All the chained commands return true. else echo "Less than 2 arguments passed to script." # At least one of the chained commands returns false. fi # Note that "if [ ! −z $1 ]" works, but its supposed equivalent, # if [ −n $1 ] does not. However, quoting fixes this. # if [ −n "$1" ] works. Careful! # It is best to always quote tested variables. # This if [ ! then echo fi if [ ! then echo echo else echo fi # It's accomplishes the same thing, using "pure" if/then statements. −z "$1" ] "Argument #1 = $1" −z "$2" ] "Argument #2 = $2" "At least 2 arguments passed to script." "Less than 2 arguments passed to script." longer and less elegant than using an "and list". exit 0 Example 25−2. Another command−line arg test using an "and list" Chapter 25. List Constructs 311 Advanced Bash−Scripting Guide #!/bin/bash ARGS=1 E_BADARGS=65 # Number of arguments expected. # Exit value if incorrect number of args passed. test $# −ne $ARGS && echo "Usage: `basename $0` $ARGS argument(s)" && exit $E_BADARGS # If condition−1 true (wrong number of args passed to script), # then the rest of the line executes, and script terminates. # Line below executes only if the above test fails. echo "Correct number of arguments passed to this script." exit 0 # To check exit value, do a "echo $?" after script termination. Of course, an and list can also set variables to a default value. arg1=$@ # Set $arg1 to command line arguments, if any. [ −z "$arg1" ] && arg1=DEFAULT # Set to DEFAULT if not specified on command line. or list command−1 || command−2 || command−3 || ... command−n Each command executes in turn for as long as the previous command returns false. At the first true return, the command chain terminates (the first command returning true is the last one to execute). This is obviously the inverse of the "and list". Example 25−3. Using "or lists" in combination with an "and list" #!/bin/bash # # delete.sh, not−so−cunning file deletion utility. Usage: delete filename E_BADARGS=65 if [ −z "$1" ] then echo "Usage: `basename $0` filename" exit $E_BADARGS # No arg? Bail out. else file=$1 # Set filename. fi [ ! −f "$file" ] && echo "File \"$file\" not found. \ Cowardly refusing to delete a nonexistent file." # AND LIST, to give error message if file not present. # Note echo message continued on to a second line with an escape. [ ! −f "$file" ] || (rm −f $file; echo "File \"$file\" deleted.") # OR LIST, to delete file if present. # Note logic inversion above. Chapter 25. List Constructs 312 Advanced Bash−Scripting Guide # AND LIST executes on true, OR LIST on false. exit 0 If the first command in an "or list" returns true, it will execute. The exit status of an and list or an or list is the exit status of the last command executed. Clever combinations of "and" and "or" lists are possible, but the logic may easily become convoluted and require extensive debugging. false && true || echo false # Same result as ( false && true ) || echo false # But *not* false && ( true || echo false ) # false # false # (nothing echoed) # Note left−to−right grouping and evaluation of statements, #+ since the logic operators "&&" and "||" have equal precedence. # # It's best to avoid such complexities, unless you know what you're doing. Thanks, S.C. See Example A−8 and Example 7−4 for illustrations of using an and / or list to test variables. Chapter 25. List Constructs 313 Chapter 26. Arrays Newer versions of Bash support one−dimensional arrays. Array elements may be initialized with the variable[xx] notation. Alternatively, a script may introduce the entire array by an explicit declare −a variable statement. To dereference (find the contents of) an array element, use curly bracket notation, that is, ${variable[xx]}. Example 26−1. Simple array usage #!/bin/bash area[11]=23 area[13]=37 area[51]=UFOs # Array members need not be consecutive or contiguous. # Some members of the array can be left uninitialized. # Gaps in the array are o.k. echo −n "area[11] = " echo ${area[11]} # echo −n "area[13] = " echo ${area[13]} {curly brackets} needed echo "Contents of area[51] are ${area[51]}." # Contents of uninitialized array variable print blank. echo −n "area[43] = " echo ${area[43]} echo "(area[43] unassigned)" echo # Sum of two array variables assigned to third area[5]=`expr ${area[11]} + ${area[13]}` echo "area[5] = area[11] + area[13]" echo −n "area[5] = " echo ${area[5]} area[6]=`expr ${area[11]} + ${area[51]}` echo "area[6] = area[11] + area[51]" echo −n "area[6] = " echo ${area[6]} # This fails because adding an integer to a string is not permitted. echo; echo; echo # # # # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Another array, "area2". Another way of assigning array variables... array_name=( XXX YYY ZZZ ... ) area2=( zero one two three four ) Chapter 26. Arrays 314 Advanced Bash−Scripting Guide echo −n "area2[0] = " echo ${area2[0]} # Aha, zero−based indexing (first element of array is [0], not [1]). echo −n "area2[1] = " echo ${area2[1]} # [1] is second element of array. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− echo; echo; echo # # # # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Yet another array, "area3". Yet another way of assigning array variables... array_name=([xx]=XXX [yy]=YYY ...) area3=([17]=seventeen [24]=twenty−four) echo −n "area3[17] = " echo ${area3[17]} echo −n "area3[24] = " echo ${area3[24]} # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− exit 0 Bash permits array operations on variables, even if the variables are not explicitly declared as arrays. string=abcABC123ABCabc echo ${string[@]} echo ${string[*]} echo ${string[0]} echo ${string[1]} echo ${#string[@]} # # # # # # # # abcABC123ABCabc abcABC123ABCabc abcABC123ABCabc No output! Why? 1 One element in the array. The string itself. # Thank you, Michael Zick, for pointing this out. Once again this demonstrates that Bash variables are untyped. Example 26−2. Formatting a poem #!/bin/bash # poem.sh: Pretty−prints one of the document author's favorite poems. # Lines of the poem (single stanza). Line[1]="I do not know which to prefer," Line[2]="The beauty of inflections" Line[3]="Or the beauty of innuendoes," Line[4]="The blackbird whistling" Line[5]="Or just after." # Attribution. Attrib[1]=" Wallace Stevens" Chapter 26. Arrays 315 Advanced Bash−Scripting Guide Attrib[2]="\"Thirteen Ways of Looking at a Blackbird\"" # This poem is in the Public Domain (copyright expired). echo for index in 1 2 3 4 5 # Five lines. do printf " %s\n" "${Line[index]}" done for index in 1 2 do printf " done echo exit 0 # Two attribution lines. %s\n" "${Attrib[index]}" Array variables have a syntax all their own, and even standard Bash commands and operators have special options adapted for array use. Example 26−3. Various array operations #!/bin/bash # array−ops.sh: More fun with arrays. array=( zero one two three four five ) # Element 0 1 2 3 4 5 echo ${array[0]} echo ${array:0} # # # #+ # # #+ zero zero Parameter expansion of starting at position # ero Parameter expansion of starting at position # first element, 0 (1st character). first element, 1 (2nd character). echo ${array:1} echo "−−−−−−−−−−−−−−" echo ${#array[0]} echo ${#array} # # # # # # # # # # # # 4 Length of first element of array. 4 Length of first element of array. (Alternate notation) 3 Length of second element of array. Arrays in Bash have zero−based indexing. 6 Number of elements in array. 6 Number of elements in array. echo ${#array[1]} echo ${#array[*]} echo ${#array[@]} echo "−−−−−−−−−−−−−−" array2=( [0]="first element" [1]="second element" [3]="fourth element" ) Chapter 26. Arrays 316 Advanced Bash−Scripting Guide echo ${array2[0]} echo ${array2[1]} echo ${array2[2]} echo ${array2[3]} # # # # # first element second element Skipped in initialization, and therefore null. fourth element exit 0 Many of the standard string operations work on arrays. Example 26−4. String operations on arrays #!/bin/bash # array−strops.sh: String operations on arrays. # Script by Michael Zick. # Used with permission. # In general, any string operation in the ${name ... } notation #+ can be applied to all string elements in an array #+ with the ${name[@] ... } or ${name[*] ...} notation. arrayZ=( one two three four five five ) echo # Trailing Substring Extraction echo ${arrayZ[@]:0} # one two three four five five # All elements. echo ${arrayZ[@]:1} # two three four five five # All elements following element[0]. # two three # Only the two elements after element[0]. echo ${arrayZ[@]:1:2} echo "−−−−−−−−−−−−−−−−−−−−−−−" # Substring Removal # Removes shortest match from front of string(s), #+ where the substring is a regular expression. echo ${arrayZ[@]#f*r} # one two three five five # Applied to all elements of the array. # Matches "four" and removes it. # Longest match from front of string(s) echo ${arrayZ[@]##t*e} # one two four five five # Applied to all elements of the array. # Matches "three" and removes it. # Shortest match from back of string(s) echo ${arrayZ[@]%h*e} # one two t four five five # Applied to all elements of the array. # Matches "hree" and removes it. # Longest match from back of string(s) Chapter 26. Arrays 317 Advanced Bash−Scripting Guide echo ${arrayZ[@]%%t*e} # one two four five five # Applied to all elements of the array. # Matches "three" and removes it. echo "−−−−−−−−−−−−−−−−−−−−−−−" # Substring Replacement # Replace first occurance of substring with replacement echo ${arrayZ[@]/fiv/XYZ} # one two three four XYZe XYZe # Applied to all elements of the array. # Replace all occurances of substring echo ${arrayZ[@]//iv/YY} # one two three four fYYe fYYe # Applied to all elements of the array. # Delete all occurances of substring # Not specifing a replacement means 'delete' echo ${arrayZ[@]//fi/} # one two three four ve ve # Applied to all elements of the array. # Replace front−end occurances of substring echo ${arrayZ[@]/#fi/XY} # one two three four XYve XYve # Applied to all elements of the array. # Replace back−end occurances of substring echo ${arrayZ[@]/%ve/ZZ} # one two three four fiZZ fiZZ # Applied to all elements of the array. echo ${arrayZ[@]/%o/XX} # one twXX three four five five # Why? echo "−−−−−−−−−−−−−−−−−−−−−−−" # Before reaching for awk (or anything else) −− # Recall: # $( ... ) is command substitution. # Functions run as a sub−process. # Functions write their output to stdout. # Assignment reads the function's stdout. # The name[@] notation specifies a "for−each" operation. newstr() { echo −n "!!!" } echo ${arrayZ[@]/%e/$(newstr)} # on!!! two thre!!! four fiv!!! fiv!!! # Q.E.D: The replacement action is an 'assignment.' # Accessing the "For−Each" echo ${arrayZ[@]//*/$(newstr optional_arguments)} # Now, if Bash would just pass the matched string as $0 #+ to the function being called . . . echo exit 0 Command substitution can construct the individual elements of an array. Chapter 26. Arrays 318 Advanced Bash−Scripting Guide Example 26−5. Loading the contents of a script into an array #!/bin/bash # script−array.sh: Loads this script into an array. # Inspired by an e−mail from Chris Martin (thanks!). script_contents=( $(cat "$0") ) # Stores contents of this script ($0) #+ in an array. for element in $(seq 0 $((${#script_contents[@]} − 1))) do # ${#script_contents[@]} #+ gives number of elements in the array. # # Question: # Why is seq 0 necessary? # Try changing it to seq 1. echo −n "${script_contents[$element]}" # List each field of this script on a single line. echo −n " −− " # Use " −− " as a field separator. done echo exit 0 # Exercise: # −−−−−−−− # Modify this script so it lists itself #+ in its original format, #+ complete with whitespace, line breaks, etc. In an array context, some Bash builtins have a slightly altered meaning. For example, unset deletes array elements, or even an entire array. Example 26−6. Some special properties of arrays #!/bin/bash declare −a colors # All subsequent commands in this script will treat #+ the variable "colors" as an array. echo "Enter your favorite colors (separated from each other by a space)." read −a colors # Enter at least 3 colors to demonstrate features below. # Special option to 'read' command, #+ allowing assignment of elements in an array. echo element_count=${#colors[@]} # Special syntax to extract number of elements in array. # element_count=${#colors[*]} works also. # # The "@" variable allows word splitting within quotes #+ (extracts variables separated by whitespace). # # This corresponds to the behavior of "$@" and "$*" #+ in positional parameters. Chapter 26. Arrays 319 Advanced Bash−Scripting Guide index=0 while [ "$index" −lt "$element_count" ] do # List all the elements in the array. echo ${colors[$index]} let "index = $index + 1" done # Each array element listed on a separate line. # If this is not desired, use echo −n "${colors[$index]} " # # Doing it with a "for" loop instead: # for i in "${colors[@]}" # do # echo "$i" # done # (Thanks, S.C.) echo # Again, list all the elements in the array, but using a more elegant method. echo ${colors[@]} # echo ${colors[*]} also works. echo # The "unset" command deletes elements of an array, or entire array. unset colors[1] # Remove 2nd element of array. # Same effect as colors[1]= echo ${colors[@]} # List array again, missing 2nd element. unset colors # Delete entire array. # unset colors[*] and #+ unset colors[@] also work. echo; echo −n "Colors gone." echo ${colors[@]} # List array again, now empty. exit 0 As seen in the previous example, either ${array_name[@]} or ${array_name[*]} refers to all the elements of the array. Similarly, to get a count of the number of elements in an array, use either ${#array_name[@]} or ${#array_name[*]}. ${#array_name} is the length (number of characters) of ${array_name[0]}, the first element of the array. Example 26−7. Of empty arrays and empty elements #!/bin/bash # empty−array.sh # Thanks to Stephane Chazelas for the original example, #+ and to Michael Zick for extending it. # An empty array is not the same as an array with empty elements. array0=( first second third ) array1=( '' ) # "array1" has one empty element. array2=( ) # No elements... "array2" is empty. echo Chapter 26. Arrays 320 Advanced Bash−Scripting Guide ListArray() { echo echo "Elements in array0: ${array0[@]}" echo "Elements in array1: ${array1[@]}" echo "Elements in array2: ${array2[@]}" echo echo "Length of first element in array0 = ${#array0}" echo "Length of first element in array1 = ${#array1}" echo "Length of first element in array2 = ${#array2}" echo echo "Number of elements in array0 = ${#array0[*]}" # 3 echo "Number of elements in array1 = ${#array1[*]}" # 1 echo "Number of elements in array2 = ${#array2[*]}" # 0 } (surprise!) # =================================================================== ListArray # Try extending those arrays # Adding array0=( array1=( array2=( an element to an array. "${array0[@]}" "new1" ) "${array1[@]}" "new1" ) "${array2[@]}" "new1" ) ListArray # or array0[${#array0[*]}]="new2" array1[${#array1[*]}]="new2" array2[${#array2[*]}]="new2" ListArray # When extended as above; arrays are 'stacks' # The above is the 'push' # The stack 'height' is: height=${#array2[@]} echo echo "Stack height for array2 = $height" # The 'pop' is: unset array2[${#array2[@]}−1] # Arrays are zero based height=${#array2[@]} echo echo "POP" echo "New stack height for array2 = $height" ListArray # List only 2nd and 3rd elements of array0 from=1 # Zero based numbering to=2 # array3=( ${array0[@]:1:2} ) echo echo "Elements in array3: ${array3[@]}" # Works like a string (array of characters) # Try some other "string" forms Chapter 26. Arrays 321 Advanced Bash−Scripting Guide # Replacement array4=( ${array0[@]/second/2nd} ) echo echo "Elements in array4: ${array4[@]}" # Replace all matching wildcarded string array5=( ${array0[@]//new?/old} ) echo echo "Elements in array5: ${array5[@]}" # Just when you are getting the feel for this... array6=( ${array0[@]#*new} ) echo # This one might surprise you echo "Elements in array6: ${array6[@]}" array7=( ${array0[@]#new1} ) echo # After array6 this should not be a surprise echo "Elements in array7: ${array7[@]}" # Which looks a lot like... array8=( ${array0[@]/new1/} ) echo echo "Elements in array8: ${array8[@]}" # # #+ # # #+ # So what can one say about this? The string operations are performed on each of the elements in var[@] in succession. Therefore : BASH supports string vector operations If the result is a zero length string, that element disappears in the resulting assignment. Question, are those strings hard or soft quotes? zap='new*' array9=( ${array0[@]/$zap/} ) echo echo "Elements in array9: ${array9[@]}" # Just when you thought you where still in Kansas . . . array10=( ${array0[@]#$zap} ) echo echo "Elements in array10: ${array10[@]}" # Compare array7 with array10 # Compare array8 with array9 # Answer: must be soft quotes. exit 0 The relationship of ${array_name[@]} and ${array_name[*]} is analogous to that between $@ and $*. This powerful array notation has a number of uses. # Copying an array. array2=( "${array1[@]}" ) # or array2="${array1[@]}" # Adding an element to an array. array=( "${array[@]}" "new element" ) Chapter 26. Arrays 322 Advanced Bash−Scripting Guide # or array[${#array[*]}]="new element" # Thanks, S.C. The array=( element1 element2 ... elementN ) initialization operation, with the help of command substitution, makes it possible to load the contents of a text file into an array. #!/bin/bash filename=sample_file # # # # cat sample_file 1abc 2 d e fg declare −a array1 array1=( `cat "$filename"`) # Loads contents # List file to stdout #+ of $filename into array1. # # array1=( `cat "$filename" | tr '\n' ' '`) # change linefeeds in file to spaces. # Not necessary because Bash does word splitting, #+ changing linefeeds to spaces. echo ${array1[@]} # List the array. # 1 a b c 2 d e fg # # Each whitespace−separated "word" in the file #+ has been assigned to an element of the array. element_count=${#array1[*]} echo $element_count #8 Clever scripting makes it possible to add array operations. Example 26−8. Initializing arrays #! /bin/bash # array−assign.bash # Array operations are Bash specific, #+ hence the ".bash" in the script name. # # # # # Copyright (c) Michael S. Zick, 2003, All rights reserved. License: Unrestricted reuse in any form, for any purpose. Version: $ID$ Clarification and additional comments by William Park. # Based on an example provided by Stephane Chazelas #+ which appeared in the book: Advanced Bash Scripting Guide. # Output format of the 'times' command: # User CPU System CPU Chapter 26. Arrays 323 Advanced Bash−Scripting Guide # User CPU of dead children System CPU of dead children # #+ # #+ # #+ Bash has two versions of assigning all elements of an array to a new array variable. Both drop 'null reference' elements in Bash versions 2.04, 2.05a and 2.05b. An additional array assignment that maintains the relationship of [subscript]=value for arrays may be added to newer versions. # Constructs a large array using an internal command, #+ but anything creating an array of several thousand elements #+ will do just fine. declare −a bigOne=( /dev/* ) echo echo 'Conditions: Unquoted, default IFS, All−Elements−Of' echo "Number of elements in array is ${#bigOne[@]}" # set −vx echo echo '− − testing: =( ${array[@]} ) − −' times declare −a bigTwo=( ${bigOne[@]} ) # ^ ^ times echo echo '− − testing: =${array[@]} − −' times declare −a bigThree=${bigOne[@]} # No parentheses this time. times # #+ # # #+ #+ # # # Comparing the numbers shows that the second form, pointed out by Stephane Chazelas, is from three to four times faster. William Park explains: Second method is assigning bigOne[] as single string, whereas first method is assigning bigOne[] element by element. So, in essence, you So, in essence, you have: bigTwo=( [0]="... ... ..." ) bigThree=( [0]="..." [1]="..." [2]="..." ... ) # I will continue to use the first form in my example descriptions #+ because I think it is a better illustration of what is happening. # The reusable portions of my examples will actual contain #+ the second form where appropriate because of the speedup. # MSZ: Sorry about that earlier oversight folks. # # # #+ #+ # Note: −−−− The "declare −a" statements in lines 31 and 43 are not strictly necessary, since it is implicit in the Array=( ... ) assignment form. However, eliminating these declarations slows down Chapter 26. Arrays 324 Advanced Bash−Scripting Guide #+ the execution of the following sections of the script. # Try it, and see what happens. exit 0 Adding a superfluous declare −a statement to an array declaration may speed up execution of subsequent operations on the array. Example 26−9. Copying and concatenating arrays #! /bin/bash # CopyArray.sh # # This script written by Michael Zick. # Used here with permission. # How−To "Pass by Name & Return by Name" #+ or "Building your own assignment statement". CpArray_Mac() { # Assignment Command Statement Builder echo echo echo echo echo −n −n −n −n −n 'eval ' "$2" '=( ${' "$1" '[@]} )' # Destination name # Source name # That could all be a single command. # Matter of style only. } declare −f CopyArray CopyArray=CpArray_Mac Hype() { # Hype the array named $1. # (Splice it together with array containing "Really Rocks".) # Return in array named $2. local −a TMP local −a hype=( Really Rocks ) $($CopyArray $1 TMP) TMP=( ${TMP[@]} ${hype[@]} ) $($CopyArray TMP $2) } declare −a before=( Advanced Bash Scripting ) declare −a after echo "Array Before = ${before[@]}" Hype before after # Function "Pointer" # Statement Builder Chapter 26. Arrays 325 Advanced Bash−Scripting Guide echo "Array After = ${after[@]}" # Too much hype? echo "What ${after[@]:3:2}?" declare −a modest=( ${after[@]:2:1} ${after[@]:3:2} ) # −−−− substring extraction −−−− echo "Array Modest = ${modest[@]}" # What happened to 'before' ? echo "Array Before = ${before[@]}" exit 0 Example 26−10. More on concatenating arrays #! /bin/bash # array−append.bash # # # # # Copyright (c) Michael S. Zick, 2003, All rights reserved. License: Unrestricted reuse in any form, for any purpose. Version: $ID$ Slightly modified in formatting by M.C. # Array operations are Bash−specific. # Legacy UNIX /bin/sh lacks equivalents. # Pipe the output of this script to 'more' #+ so it doesn't scroll off the terminal. # Subscript packed. declare −a array1=( zero1 one1 two1 ) # Subscript sparse ([1] is not defined). declare −a array2=( [0]=zero2 [2]=two2 [3]=three2 ) echo echo '− Confirm that the array is really subscript sparse. −' echo "Number of elements: 4" # Hard−coded for illustration. for (( i = 0 ; i < 4 ; i++ )) do echo "Element [$i]: ${array2[$i]}" done # See also the more general code example in basics−reviewed.bash. declare −a dest # Combine (append) two arrays into a third array. echo echo 'Conditions: Unquoted, default IFS, All−Elements−Of operator' echo '− Undefined elements not present, subscripts not maintained. −' # # The undefined elements do not exist; they are not being dropped. Chapter 26. Arrays 326 Advanced Bash−Scripting Guide dest=( ${array1[@]} ${array2[@]} ) # dest=${array1[@]}${array2[@]} # Now, list the result. echo echo '− − Testing Array Append − −' cnt=${#dest[@]} echo "Number of elements: $cnt" for (( i = 0 ; i < cnt ; i++ )) do echo "Element [$i]: ${dest[$i]}" done # Assign an array to a single array element (twice). dest[0]=${array1[@]} dest[1]=${array2[@]} # List the result. echo echo '− − Testing modified array − −' cnt=${#dest[@]} echo "Number of elements: $cnt" for (( i = 0 ; i < cnt ; i++ )) do echo "Element [$i]: ${dest[$i]}" done # Examine the modified second element. echo echo '− − Reassign and list second element − −' declare −a subArray=${dest[1]} cnt=${#subArray[@]} echo "Number of elements: $cnt" for (( i = 0 ; i < cnt ; i++ )) do echo "Element [$i]: ${subArray[$i]}" done # #+ #+ #+ The assignment of an entire array to a of another array using the '=${ ... }' has converted the array being assigned with the elements separated by a space single element array assignment into a string, (the first character of IFS). # Strange results, possibly a bug. # If the original elements didn't contain whitespace . . . # If the original array isn't subscript sparse . . . # Then we could get the original array structure back again. # Restore from the modified second element. echo echo '− − Listing restored element − −' declare −a subArray=( ${dest[1]} ) cnt=${#subArray[@]} echo "Number of elements: $cnt" for (( i = 0 ; i < cnt ; i++ )) do echo "Element [$i]: ${subArray[$i]}" Chapter 26. Arrays 327 Advanced Bash−Scripting Guide done echo '− − Do not depend on this behavior. − −' echo '− − This behavior is subject to change − −' echo '− − in versions of Bash newer than version 2.05b − −' # MSZ: Sorry about any earlier confusion folks. exit 0 −− Arrays permit deploying old familiar algorithms as shell scripts. Whether this is necessarily a good idea is left to the reader to decide. Example 26−11. An old friend: The Bubble Sort #!/bin/bash # bubble.sh: Bubble sort, of sorts. # Recall the algorithm for a bubble sort. In this particular version... # #+ # # # # # With each successive pass through the array to be sorted, compare two adjacent elements, and swap them if out of order. At the end of the first pass, the "heaviest" element has sunk to bottom. At the end of the second pass, the next "heaviest" one has sunk next to bottom. And so forth. This means that each successive pass needs to traverse less of the array. You will therefore notice a speeding up in the printing of the later passes. exchange() { # Swaps two members of the array. local temp=${Countries[$1]} # Temporary storage #+ for element getting swapped out. Countries[$1]=${Countries[$2]} Countries[$2]=$temp return } declare −a Countries # Declare array, #+ optional here since it's initialized below. # Is it permissable to split an array variable over multiple lines #+ using an escape (\)? # Yes. Countries=(Netherlands Ukraine Zaire Turkey Russia Yemen Syria \ Brazil Argentina Nicaragua Japan Mexico Venezuela Greece England \ Israel Peru Canada Oman Denmark Wales France Kenya \ Xanadu Qatar Liechtenstein Hungary) # "Xanadu" is the mythical place where, according to Coleridge, #+ Kubla Khan did a pleasure dome decree. clear # Clear the screen to start with. Chapter 26. Arrays 328 Advanced Bash−Scripting Guide echo "0: ${Countries[*]}" # List entire array at pass 0. number_of_elements=${#Countries[@]} let "comparisons = $number_of_elements − 1" count=1 # Pass number. while [ "$comparisons" −gt 0 ] do index=0 # Beginning of outer loop # Reset index to start of array after each pass. while [ "$index" −lt "$comparisons" ] # Beginning of inner loop do if [ ${Countries[$index]} \> ${Countries[`expr $index + 1`]} ] # If out of order... # Recalling that \> is ASCII comparison operator #+ within single brackets. # if [[ ${Countries[$index]} > ${Countries[`expr $index + 1`]} ]] #+ also works. then exchange $index `expr $index + 1` # Swap. fi let "index += 1" done # End of inner loop # # # # # # # # # # # # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Paulo Marcel Coelho Aragao suggests for−loops as a simpler altenative. for (( last = $number_of_elements − 1 ; last > 1 ; last−− )) do for (( i = 0 ; i < last ; i++ )) do [[ "${Countries[$i]}" > "${Countries[$((i+1))]}" ]] \ && exchange $i $((i+1)) done done −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− let "comparisons −= 1" # Since "heaviest" element bubbles to bottom, #+ we need do one less comparison each pass. echo echo "$count: ${Countries[@]}" echo let "count += 1" done # Print resultant array at end of each pass. # Increment pass count. # End of outer loop # All done. exit 0 −− Is it possible to nest arrays within arrays? #!/bin/bash # "Nested" array. Chapter 26. Arrays 329 Advanced Bash−Scripting Guide # Michael Zick provided this example, #+ with corrections and clarifications by William Park. AnArray=( $(ls −−inode −−ignore−backups −−almost−all \ −−directory −−full−time −−color=none −−time=status \ −−sort=time −l ${PWD} ) ) # Commands and options. # Spaces are significant . . . and don't quote anything in the above. SubArray=( ${AnArray[@]:11:1} ${AnArray[@]:6:5} ) # This array has six elements: #+ SubArray=( [0]=${AnArray[11]} [1]=${AnArray[6]} [2]=${AnArray[7]} # [3]=${AnArray[8]} [4]=${AnArray[9]} [5]=${AnArray[10]} ) # # Arrays in Bash are (circularly) linked lists #+ of type string (char *). # So, this isn't actually a nested array, #+ but it's functionally similar. echo "Current directory and date of last status change:" echo "${SubArray[@]}" exit 0 −− Embedded arrays in combination with indirect references create some fascinating possibilities Example 26−12. Embedded arrays and indirect references #!/bin/bash # embedded−arrays.sh # Embedded arrays and indirect references. # This script by Dennis Leeuw. # Used with permission. # Modified by document author. ARRAY1=( VAR1_1=value11 VAR1_2=value12 VAR1_3=value13 ) ARRAY2=( VARIABLE="test" STRING="VAR1=value1 VAR2=value2 VAR3=value3" ARRAY21=${ARRAY1[*]} ) # Embed ARRAY1 within this second array. function print () { OLD_IFS="$IFS" IFS=$'\n' # To print each array element #+ on a separate line. TEST1="ARRAY2[*]" local ${!TEST1} # See what happens if you delete this line. # Indirect reference. # This makes the components of $TEST1 Chapter 26. Arrays 330 Advanced Bash−Scripting Guide #+ accessible to this function. # Let's see what we've got so far. echo echo "\$TEST1 = $TEST1" # Just the name of the variable. echo; echo echo "{\$TEST1} = ${!TEST1}" # Contents of the variable. # That's what an indirect #+ reference does. echo echo "−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−"; echo echo # Print variable echo "Variable VARIABLE: $VARIABLE" # Print a string element IFS="$OLD_IFS" TEST2="STRING[*]" local ${!TEST2} # Indirect reference (as above). echo "String element VAR2: $VAR2 from STRING" # Print an array element TEST2="ARRAY21[*]" local ${!TEST2} # Indirect reference (as above). echo "Array element VAR1_1: $VAR1_1 from ARRAY21" } print echo exit 0 # As the author of the script notes, #+ "you can easily expand it to create named−hashes in bash." # (Difficult) exercise for the reader: implement this. −− Arrays enable implementing a shell script version of the Sieve of Eratosthenes. Of course, a resource−intensive application of this nature should really be written in a compiled language, such as C. It runs excruciatingly slowly as a script. Example 26−13. Complex array application: Sieve of Eratosthenes #!/bin/bash # sieve.sh # Sieve of Eratosthenes # Ancient algorithm for finding prime numbers. # This runs a couple of orders of magnitude # slower than the equivalent C program. LOWER_LIMIT=1 # Starting with 1. UPPER_LIMIT=1000 # Up to 1000. # (You may set this higher... if you have time on your hands.) Chapter 26. Arrays 331 Advanced Bash−Scripting Guide PRIME=1 NON_PRIME=0 let SPLIT=UPPER_LIMIT/2 # Optimization: # Need to test numbers only halfway to upper limit. declare −a Primes # Primes[] is an array. initialize () { # Initialize the array. i=$LOWER_LIMIT until [ "$i" −gt "$UPPER_LIMIT" ] do Primes[i]=$PRIME let "i += 1" done # Assume all array members guilty (prime) # until proven innocent. } print_primes () { # Print out the members of the Primes[] array tagged as prime. i=$LOWER_LIMIT until [ "$i" −gt "$UPPER_LIMIT" ] do if [ "${Primes[i]}" −eq "$PRIME" ] then printf "%8d" $i # 8 spaces per number gives nice, even columns. fi let "i += 1" done } sift () # Sift out the non−primes. { let i=$LOWER_LIMIT+1 # We know 1 is prime, so let's start with 2. until [ "$i" −gt "$UPPER_LIMIT" ] do if [ "${Primes[i]}" −eq "$PRIME" ] # Don't bother sieving numbers already sieved (tagged as non−prime). then t=$i Chapter 26. Arrays 332 Advanced Bash−Scripting Guide while [ "$t" −le "$UPPER_LIMIT" ] do let "t += $i " Primes[t]=$NON_PRIME # Tag as non−prime all multiples. done fi let "i += 1" done } # Invoke the functions sequentially. initialize sift print_primes # This is what they call structured programming. echo exit 0 # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # # Code below line will not execute. # This improved version of the Sieve, by Stephane Chazelas, # executes somewhat faster. # Must invoke with command−line argument (limit of primes). UPPER_LIMIT=$1 let SPLIT=UPPER_LIMIT/2 # From command line. # Halfway to max number. Primes=( '' $(seq $UPPER_LIMIT) ) i=1 until (( ( i += 1 ) > SPLIT )) # Need check only halfway. do if [[ −n $Primes[i] ]] then t=$i until (( ( t += i ) > UPPER_LIMIT )) do Primes[t]= done fi done echo ${Primes[*]} exit 0 Compare this array−based prime number generator with an alternative that does not use arrays, Example A−17. Chapter 26. Arrays 333 Advanced Bash−Scripting Guide −− Arrays lend themselves, to some extent, to emulating data structures for which Bash has no native support. Example 26−14. Emulating a push−down stack #!/bin/bash # stack.sh: push−down stack simulation # Similar to the CPU stack, a push−down stack stores data items #+ sequentially, but releases them in reverse order, last−in first−out. BP=100 # Base Pointer of stack array. # Begin at element 100. # Stack Pointer. # Initialize it to "base" (bottom) of stack. # Contents of stack location. # Must use local variable, #+ because of limitation on function return range. SP=$BP Data= declare −a stack push() { if [ −z "$1" ] then return fi let "SP −= 1" stack[$SP]=$1 return } pop() { Data= # Push item on stack. # Nothing to push? # Bump stack pointer. # Pop item off stack. # Empty out data item. # Stack empty? if [ "$SP" −eq "$BP" ] then return fi # This also keeps SP from getting past 100, #+ i.e., prevents a runaway stack. Data=${stack[$SP]} let "SP += 1" return } # Bump stack pointer. status_report() # Find out what's happening. { echo "−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−" echo "REPORT" echo "Stack Pointer = $SP" echo "Just popped \""$Data"\" off the stack." Chapter 26. Arrays 334 Advanced Bash−Scripting Guide echo "−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−" echo } # ======================================================= # Now, for some fun. echo # See if you can pop anything off empty stack. pop status_report echo push garbage pop status_report # Garbage in, garbage out. value1=23; push $value1 value2=skidoo; push $value2 value3=FINAL; push $value3 pop status_report pop status_report pop status_report # FINAL # skidoo # 23 # Last−in, first−out! # Notice how the stack pointer decrements with each push, #+ and increments with each pop. echo # ======================================================= # Exercises: # −−−−−−−−− # 1) Modify the "push()" function to permit pushing # + multiple element on the stack with a single function call. # 2) Modify the "pop()" function to permit popping # + multiple element from the stack with a single function call. # 3) Using this script as a jumping−off point, # + write a stack−based 4−function calculator. exit 0 −− Fancy manipulation of array "subscripts" may require intermediate variables. For projects involving this, again consider using a more powerful programming language, such as Perl or C. Example 26−15. Complex array application: Exploring a weird mathematical series Chapter 26. Arrays 335 Advanced Bash−Scripting Guide #!/bin/bash # Douglas Hofstadter's notorious "Q−series": # Q(1) = Q(2) = 1 # Q(n) = Q(n − Q(n−1)) + Q(n − Q(n−2)), for n>2 # This is a "chaotic" integer series with strange and unpredictable behavior. # The first 20 terms of the series are: # 1 1 2 3 3 4 5 5 6 6 6 8 8 8 10 9 10 11 11 12 # See Hofstadter's book, "Goedel, Escher, Bach: An Eternal Golden Braid", # p. 137, ff. LIMIT=100 LINEWIDTH=20 Q[1]=1 Q[2]=1 # Number of terms to calculate # Number of terms printed per line # First two terms of series are 1. echo echo "Q−series [$LIMIT terms]:" echo −n "${Q[1]} " # Output first two terms. echo −n "${Q[2]} " for ((n=3; n <= $LIMIT; n++)) # C−like loop conditions. do # Q[n] = Q[n − Q[n−1]] + Q[n − Q[n−2]] for n>2 # Need to break the expression into intermediate terms, # since Bash doesn't handle complex array arithmetic very well. let "n1 = $n − 1" let "n2 = $n − 2" t0=`expr $n − ${Q[n1]}` t1=`expr $n − ${Q[n2]}` T0=${Q[t0]} T1=${Q[t1]} Q[n]=`expr $T0 + $T1` echo −n "${Q[n]} " # n−1 # n−2 # n − Q[n−1] # n − Q[n−2] # Q[n − Q[n−1]] # Q[n − Q[n−2]] # Q[n − Q[n−1]] + Q[n − Q[n−2]] if [ `expr $n % $LINEWIDTH` −eq 0 ] # Format output. then # mod echo # Break lines into neat chunks. fi done echo exit 0 # This is an iterative implementation of the Q−series. # The more intuitive recursive implementation is left as an exercise. # Warning: calculating this series recursively takes a *very* long time. −− Chapter 26. Arrays 336 Advanced Bash−Scripting Guide Bash supports only one−dimensional arrays, however a little trickery permits simulating multi−dimensional ones. Example 26−16. Simulating a two−dimensional array, then tilting it #!/bin/bash # twodim.sh: Simulating a two−dimensional array. # A one−dimensional array consists of a single row. # A two−dimensional array stores rows sequentially. Rows=5 Columns=5 # 5 X 5 Array. declare −a alpha # char alpha [Rows] [Columns]; # Unnecessary declaration. Why? load_alpha () { local rc=0 local index for i in A B C D E F G H I J K L M N O P Q R S T U V W X Y do # Use different symbols if you like. local row=`expr $rc / $Columns` local column=`expr $rc % $Rows` let "index = $row * $Rows + $column" alpha[$index]=$i # alpha[$row][$column] let "rc += 1" done # Simpler would be #+ declare −a alpha=( A B C D E F G H I J K L M N O P Q R S T U V W X Y ) #+ but this somehow lacks the "flavor" of a two−dimensional array. } print_alpha () { local row=0 local index echo while [ "$row" −lt "$Rows" ] do local column=0 echo −n " " # Lines up "square" array with rotated one. # Print out in "row major" order: #+ columns vary, #+ while row (outer loop) remains the same. while [ "$column" −lt "$Columns" ] do let "index = $row * $Rows + $column" echo −n "${alpha[index]} " # alpha[$row][$column] let "column += 1" done let "row += 1" Chapter 26. Arrays 337 Advanced Bash−Scripting Guide echo done # The simpler equivalent is # echo ${alpha[*]} | xargs −n $Columns echo } filter () { echo −n " " # Filter out negative array indices. # Provides the tilt. # Explain why. if [[ "$1" −ge 0 && "$1" −lt "$Rows" && "$2" −ge 0 && "$2" −lt "$Columns" ]] then let "index = $1 * $Rows + $2" # Now, print it rotated. echo −n " ${alpha[index]}" # alpha[$row][$column] fi } rotate () # Rotate the array 45 degrees −− { #+ "balance" it on its lower lefthand corner. local row local column for (( row = Rows; row > −Rows; row−− )) do # Step through the array backwards. Why? for (( column = 0; column < Columns; column++ )) do if [ "$row" then let "t1 = let "t2 = else let "t1 = let "t2 = fi −ge 0 ] $column − $row" $column" $column" $column + $row" filter $t1 $t2 done echo; echo done # #+ #+ # #+ # Filter out negative array indices. Why? Array rotation inspired by examples (pp. 143−146) in "Advanced C Programming on the IBM PC," by Herbert Mayer (see bibliography). This just goes to show that much of what can be done in C can also be done in shell scripting. Chapter 26. Arrays 338 Advanced Bash−Scripting Guide } #−−−−−−−−−−−−−−− Now, let the show begin. −−−−−−−−−−−−# load_alpha # Load the array. print_alpha # Print it out. rotate # Rotate it 45 degrees counterclockwise. #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−# exit 0 # This is a rather contrived, not to mention inelegant simulation. # # # # # # # # # # # Exercises: −−−−−−−−− 1) Rewrite the array loading and printing functions in a more intuitive and less kludgy fashion. 2) Figure out how the array rotation functions work. Hint: think about the implications of backwards−indexing an array. Rewrite this script to handle a non−square array, such as a 6 X 4 one. Try to minimize "distortion" when the array is rotated. 3) A two−dimensional array is essentially equivalent to a one−dimensional one, but with additional addressing modes for referencing and manipulating the individual elements by "row" and "column" position. For an even more elaborate example of simulating a two−dimensional array, see Example A−11. Chapter 26. Arrays 339 Chapter 27. Files startup files These files contain the aliases and environmental variables made available to Bash running as a user shell and to all Bash scripts invoked after system initialization. /etc/profile systemwide defaults, mostly setting the environment (all Bourne−type shells, not just Bash [56]) /etc/bashrc systemwide functions and aliases for Bash $HOME/.bash_profile user−specific Bash environmental default settings, found in each user's home directory (the local counterpart to /etc/profile) $HOME/.bashrc user−specific Bash init file, found in each user's home directory (the local counterpart to /etc/bashrc). Only interactive shells and user scripts read this file. See Appendix J for a sample .bashrc file. logout file $HOME/.bash_logout user−specific instruction file, found in each user's home directory. Upon exit from a login (Bash) shell, the commands in this file execute. Chapter 27. Files 340 Chapter 28. /dev and /proc A Linux or Unix machine typically has the /dev and /proc special−purpose directories. 28.1. /dev The /dev directory contains entries for the physical devices that may or may not be present in the hardware. [57] The hard drive partitions containing the mounted filesystem(s) have entries in /dev, as a simple df shows. bash$ df Filesystem Mounted on /dev/hda6 /dev/hda1 /dev/hda8 /dev/hda5 1k−blocks 495876 50755 367013 1714416 Used Available Use% 222748 3887 13262 1123624 247527 44248 334803 503704 48% 9% 4% 70% / /boot /home /usr Among other things, the /dev directory also contains loopback devices, such as /dev/loop0. A loopback device is a gimmick that allows an ordinary file to be accessed as if it were a block device. [58] This enables mounting an entire filesystem within a single large file. See Example 13−7 and Example 13−6. A few of the pseudo−devices in /dev have other specialized uses, such as /dev/null, /dev/zero, /dev/urandom, and /dev/tcp. Example 28−1. Using /dev/tcp #!/bin/bash # dev−tcp.sh: /dev/tcp redirection to check Internet connection. # Script by Troy Engel. # Used with permission. TCP_HOST=www.slashdot.org TCP_PORT=80 # Port 80 is http. # Try to connect. (Somewhat similar to a 'ping.') echo "HEAD / HTTP/1.0" >/dev/tcp/${TCP_HOST}/${TCP_PORT} MYEXIT=$? : << EXPLANATION If bash was compiled with −−enable−net−redirections, it has the capability of using a special character device for both TCP and UDP redirections. These redirections are used identically as STDIN/STDOUT/STDERR. The device entries are 30,36 for /dev/tcp: mknod /dev/tcp c 30 36 >From the bash reference: /dev/tcp/host/port If host is a valid hostname or Internet address, and port is an integer port number or service name, Bash attempts to open a TCP connection to the Chapter 28. /dev and /proc 341 Advanced Bash−Scripting Guide corresponding socket. EXPLANATION if [ "X$MYEXIT" = "X0" ]; then echo "Connection successful. Exit code: $MYEXIT" else echo "Connection unsuccessful. Exit code: $MYEXIT" fi exit $MYEXIT 28.2. /proc The /proc directory is actually a pseudo−filesystem. The files in the /proc directory mirror currently running system and kernel processes and contain information and statistics about them. bash$ cat /proc/devices Character devices: 1 mem 2 pty 3 ttyp 4 ttyS 5 cua 7 vcs 10 misc 14 sound 29 fb 36 netlink 128 ptm 136 pts 162 raw 254 pcmcia Block devices: 1 ramdisk 2 fd 3 ide0 9 md bash$ cat /proc/interrupts CPU0 0: 84505 XT−PIC 1: 3375 XT−PIC 2: 0 XT−PIC 5: 1 XT−PIC 8: 1 XT−PIC 12: 4231 XT−PIC 14: 109373 XT−PIC NMI: 0 ERR: 0 timer keyboard cascade soundblaster rtc PS/2 Mouse ide0 bash$ cat /proc/partitions major minor #blocks name 3 0 rio rmerge rsect ruse wio wmerge wsect wuse running use aveq 3007872 hda 4472 22260 114520 94240 3551 18703 50384 549710 0 111550 644030 Chapter 28. /dev and /proc 342 Advanced Bash−Scripting Guide 3 3 3 ... 1 2 4 52416 hda1 27 395 844 960 4 2 14 180 0 800 1140 1 hda2 0 0 0 0 0 0 0 0 0 0 0 165280 hda4 10 0 20 210 0 0 0 0 0 210 210 bash$ cat /proc/loadavg 0.13 0.42 0.27 2/44 1119 Shell scripts may extract data from certain of the files in /proc. [59] bash$ cat /proc/filesystems | grep iso9660 iso9660 kernel_version=$( awk '{ print $3 }' /proc/version ) CPU=$( awk '/model name/ {print $4}' < /proc/cpuinfo ) if [ $CPU = Pentium ] then run_some_commands ... else run_different_commands ... fi The /proc directory contains subdirectories with unusual numerical names. Every one of these names maps to the process ID of a currently running process. Within each of these subdirectories, there are a number of files that hold useful information about the corresponding process. The stat and status files keep running statistics on the process, the cmdline file holds the command−line arguments the process was invoked with, and the exe file is a symbolic link to the complete path name of the invoking process. There are a few more such files, but these seem to be the most interesting from a scripting standpoint. Example 28−2. Finding the process associated with a PID #!/bin/bash # pid−identifier.sh: Gives complete path name to process associated with pid. ARGNO=1 # Number of arguments the script expects. E_WRONGARGS=65 E_BADPID=66 E_NOSUCHPROCESS=67 E_NOPERMISSION=68 PROCFILE=exe if [ $# −ne $ARGNO ] then echo "Usage: `basename $0` PID−number" >&2 exit $E_WRONGARGS fi # Error message >stderr. Chapter 28. /dev and /proc 343 Advanced Bash−Scripting Guide pidno=$( ps ax | grep $1 | awk '{ print $1 }' | grep $1 ) # Checks for pid in "ps" listing, field #1. # Then makes sure it is the actual process, not the process invoked by this script. # The last "grep $1" filters out this possibility. if [ −z "$pidno" ] # If, after all the filtering, the result is a zero−length string, then # no running process corresponds to the pid given. echo "No such process running." exit $E_NOSUCHPROCESS fi # Alternatively: # if ! ps $1 > /dev/null 2>&1 # then # no running process corresponds to the pid given. # echo "No such process running." # exit $E_NOSUCHPROCESS # fi # To simplify the entire process, use "pidof". if [ ! then echo echo exit fi −r "/proc/$1/$PROCFILE" ] # Check for read permission. "Process $1 running, but..." "Can't get read permission on /proc/$1/$PROCFILE." $E_NOPERMISSION # Ordinary user can't access some files in /proc. # The last two tests may be replaced by: # if ! kill −0 $1 > /dev/null 2>&1 # '0' is not a signal, but # this will test whether it is possible # to send a signal to the process. # then echo "PID doesn't exist or you're not its owner" >&2 # exit $E_BADPID # fi exe_file=$( ls −l /proc/$1 | grep "exe" | awk '{ print $11 }' ) # Or exe_file=$( ls −l /proc/$1/exe | awk '{print $11}' ) # # /proc/pid−number/exe is a symbolic link # to the complete path name of the invoking process. if [ −e "$exe_file" ] # If /proc/pid−number/exe exists... then # the corresponding process exists. echo "Process #$1 invoked by $exe_file." else echo "No such process running." fi # # # # # # # # # This elaborate script can *almost* be replaced by ps ax | grep $1 | awk '{ print $5 }' However, this will not work... because the fifth field of 'ps' is argv[0] of the process, not the executable file path. However, either of the following would work. find /proc/$1/exe −printf '%l\n' lsof −aFn −p $1 −d txt | sed −ne 's/^n//p' # Additional commentary by Stephane Chazelas. Chapter 28. /dev and /proc 344 Advanced Bash−Scripting Guide exit 0 Example 28−3. On−line connect status #!/bin/bash PROCNAME=pppd PROCFILENAME=status NOTCONNECTED=65 INTERVAL=2 # ppp daemon # Where to look. # Update every 2 seconds. pidno=$( ps ax | grep −v "ps ax" | grep −v grep | grep $PROCNAME | awk '{ print $1 }' ) # Finding the process number of 'pppd', the 'ppp daemon'. # Have to filter out the process lines generated by the search itself. # # However, as Oleg Philon points out, #+ this could have been considerably simplified by using "pidof". # pidno=$( pidof $PROCNAME ) # # Moral of the story: #+ When a command sequence gets too complex, look for a shortcut. if [ −z "$pidno" ] # If no pid, then process is not running. then echo "Not connected." exit $NOTCONNECTED else echo "Connected."; echo fi while [ true ] do # Endless loop, script can be improved here. if [ ! −e "/proc/$pidno/$PROCFILENAME" ] # While process running, then "status" file exists. then echo "Disconnected." exit $NOTCONNECTED fi netstat −s | grep "packets received" # Get some connect statistics. netstat −s | grep "packets delivered" sleep $INTERVAL echo; echo done exit 0 # As it stands, this script must be terminated with a Control−C. # # # # Exercises: −−−−−−−−− Improve the script so it exits on a "q" keystroke. Make the script more user−friendly in other ways. Chapter 28. /dev and /proc 345 Advanced Bash−Scripting Guide In general, it is dangerous to write to the files in /proc, as this can corrupt the filesystem or crash the machine. Chapter 28. /dev and /proc 346 Chapter 29. Of Zeros and Nulls /dev/zero and /dev/null Uses of /dev/null Think of /dev/null as a "black hole". It is the nearest equivalent to a write−only file. Everything written to it disappears forever. Attempts to read or output from it result in nothing. Nevertheless, /dev/null can be quite useful from both the command line and in scripts. Suppressing stdout. cat $filename >/dev/null # Contents of the file will not list to stdout. Suppressing stderr (from Example 12−3). rm $badname 2>/dev/null # So error messages [stderr] deep−sixed. Suppressing output from both stdout and stderr. cat $filename 2>/dev/null >/dev/null # If "$filename" does not exist, there will be no error message output. # If "$filename" does exist, the contents of the file will not list to stdout. # Therefore, no output at all will result from the above line of code. # # This can be useful in situations where the return code from a command #+ needs to be tested, but no output is desired. # # cat $filename &>/dev/null # also works, as Baris Cicek points out. Deleting contents of a file, but preserving the file itself, with all attendant permissions (from Example 2−1 and Example 2−2): cat /dev/null > /var/log/messages # : > /var/log/messages has same effect, but does not spawn a new process. cat /dev/null > /var/log/wtmp Automatically emptying the contents of a logfile (especially good for dealing with those nasty "cookies" sent by Web commercial sites): Example 29−1. Hiding the cookie jar if [ −f ~/.netscape/cookies ] then rm −f ~/.netscape/cookies fi # Remove, if exists. ln −s /dev/null ~/.netscape/cookies Chapter 29. Of Zeros and Nulls 347 Advanced Bash−Scripting Guide # All cookies now get sent to a black hole, rather than saved to disk. Uses of /dev/zero Like /dev/null, /dev/zero is a pseudo file, but it actually contains nulls (binary zeros, not the ASCII kind). Output written to it disappears, and it is fairly difficult to actually read the nulls in /dev/zero, though it can be done with od or a hex editor. The chief use for /dev/zero is in creating an initialized dummy file of specified length intended as a temporary swap file. Example 29−2. Setting up a swapfile using /dev/zero #!/bin/bash # Creating a swapfile. # This script must be run as root. ROOT_UID=0 E_WRONG_USER=65 FILE=/swap BLOCKSIZE=1024 MINBLOCKS=40 SUCCESS=0 if [ "$UID" −ne "$ROOT_UID" ] then echo; echo "You must be root to run this script."; echo exit $E_WRONG_USER fi # Root has $UID 0. # Not root? blocks=${1:−$MINBLOCKS} # # # # # # # # # # Set to default of 40 blocks, #+ if nothing specified on command line. This is the equivalent of the command block below. −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− if [ −n "$1" ] then blocks=$1 else blocks=$MINBLOCKS fi −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− if [ "$blocks" −lt $MINBLOCKS ] then blocks=$MINBLOCKS fi # Must be at least 40 blocks long. echo "Creating swap file of size $blocks blocks (KB)." dd if=/dev/zero of=$FILE bs=$BLOCKSIZE count=$blocks # Zero out file. mkswap $FILE $blocks swapon $FILE # Designate it a swap file. # Activate swap file. echo "Swap file created and activated." exit $SUCCESS Chapter 29. Of Zeros and Nulls 348 Advanced Bash−Scripting Guide Another application of /dev/zero is to "zero out" a file of a designated size for a special purpose, such as mounting a filesystem on a loopback device (see Example 13−7) or securely deleting a file (see Example 12−48). Example 29−3. Creating a ramdisk #!/bin/bash # ramdisk.sh # #+ # # # # # # #+ A "ramdisk" is a segment of system RAM memory that acts as if it were a filesystem. Its advantage is very fast access (read/write time). Disadvantages: volatility, loss of data on reboot or powerdown. less RAM available to system. What good is a ramdisk? Keeping a large dataset, such as a table or dictionary on ramdisk speeds up data lookup, since memory access is much faster than disk access. E_NON_ROOT_USER=70 ROOTUSER_NAME=root MOUNTPT=/mnt/ramdisk SIZE=2000 BLOCKSIZE=1024 DEVICE=/dev/ram0 # Must run as root. # 2K blocks (change as appropriate) # 1K (1024 byte) block size # First ram device username=`id −nu` if [ "$username" != "$ROOTUSER_NAME" ] then echo "Must be root to run \"`basename $0`\"." exit $E_NON_ROOT_USER fi if [ ! −d "$MOUNTPT" ] then mkdir $MOUNTPT fi # Test whether mount point already there, #+ so no error if this script is run #+ multiple times. dd if=/dev/zero of=$DEVICE count=$SIZE bs=$BLOCKSIZE # Zero out RAM device. mke2fs $DEVICE # Create an ext2 filesystem on it. mount $DEVICE $MOUNTPT # Mount it. chmod 777 $MOUNTPT # So ordinary user can access ramdisk. # However, must be root to unmount it. echo "\"$MOUNTPT\" now available for use." # The ramdisk is now accessible for storing files, even by an ordinary user. # Caution, the ramdisk is volatile, and its contents will disappear #+ on reboot or power loss. # Copy anything you want saved to a regular directory. # After reboot, run this script again to set up ramdisk. # Remounting /mnt/ramdisk without the other steps will not work. exit 0 Chapter 29. Of Zeros and Nulls 349 Chapter 30. Debugging The Bash shell contains no debugger, nor even any debugging−specific commands or constructs. [60] Syntax errors or outright typos in the script generate cryptic error messages that are often of no help in debugging a non−functional script. Example 30−1. A buggy script #!/bin/bash # ex74.sh # This is a buggy script. # Where, oh where is the error? a=37 if [$a −gt 27 ] then echo $a fi exit 0 Output from script: ./ex74.sh: [37: command not found What's wrong with the above script (hint: after the if)? Example 30−2. Missing keyword #!/bin/bash # missing−keyword.sh: What error message will this generate? for a in 1 2 3 do echo "$a" # done # Required keyword 'done' commented out in line 7. exit 0 Output from script: missing−keyword.sh: line 10: syntax error: unexpected end of file Note that the error message does not necessarily reference the line in which the error occurs, but the line where the Bash interpreter finally becomes aware of the error. Error messages may disregard comment lines in a script when reporting the line number of a syntax error. What if the script executes, but does not work as expected? This is the all too familiar logic error. Chapter 30. Debugging 350 Advanced Bash−Scripting Guide Example 30−3. test24, another buggy script #!/bin/bash # #+ # # This script is supposed to delete all filenames in current directory containing embedded spaces. It doesn't work. Why not? badname=`ls | grep ' '` # echo "$badname" rm "$badname" exit 0 Try to find out what's wrong with Example 30−3 by uncommenting the echo "$badname" line. Echo statements are useful for seeing whether what you expect is actually what you get. In this particular case, rm "$badname" will not give the desired results because $badname should not be quoted. Placing it in quotes ensures that rm has only one argument (it will match only one filename). A partial fix is to remove to quotes from $badname and to reset $IFS to contain only a newline, IFS=$'\n'. However, there are simpler ways of going about it. # Correct methods of deleting filenames containing spaces. rm *\ * rm *" "* rm *' '* # Thank you. S.C. Summarizing the symptoms of a buggy script, 1. It bombs with a "syntax error" message, or 2. It runs, but does not work as expected (logic error). 3. It runs, works as expected, but has nasty side effects (logic bomb). Tools for debugging non−working scripts include 1. echo statements at critical points in the script to trace the variables, and otherwise give a snapshot of what is going on. 2. using the tee filter to check processes or data flows at critical points. 3. setting option flags −n −v −x sh −n scriptname checks for syntax errors without actually running the script. This is the equivalent of inserting set −n or set −o noexec into the script. Note that certain types of syntax errors can slip past this check. sh −v scriptname echoes each command before executing it. This is the equivalent of inserting set −v or set −o verbose in the script. The −n and −v flags work well together. sh −nv scriptname gives a verbose syntax check. Chapter 30. Debugging 351 Advanced Bash−Scripting Guide sh −x scriptname echoes the result each command, but in an abbreviated manner. This is the equivalent of inserting set −x or set −o xtrace in the script. Inserting set −u or set −o nounset in the script runs it, but gives an unbound variable error message at each attempt to use an undeclared variable. 4. Using an "assert" function to test a variable or condition at critical points in a script. (This is an idea borrowed from C.) Example 30−4. Testing a condition with an "assert" #!/bin/bash # assert.sh assert () { E_PARAM_ERR=98 E_ASSERT_FAILED=99 # If condition false, #+ exit from script with error message. if [ −z "$2" ] then return $E_PARAM_ERR fi lineno=$2 # Not enough parameters passed. # No damage done. if [ ! $1 ] then echo "Assertion failed: \"$1\"" echo "File \"$0\", line $lineno" exit $E_ASSERT_FAILED # else # return # and continue executing script. fi } a=5 b=4 condition="$a −lt $b" # Error message and exit from script. # Try setting "condition" to something else, #+ and see what happens. assert "$condition" $LINENO # The remainder of the script executes only if the "assert" does not fail. # Some commands. # ... echo "This statement echoes only if the \"assert\" does not fail." # ... # Some more commands. exit 0 5. trapping at exit. The exit command in a script triggers a signal 0, terminating the process, that is, the script itself. [61] It is often useful to trap the exit, forcing a "printout" of variables, for example. The trap must be the Chapter 30. Debugging 352 Advanced Bash−Scripting Guide first command in the script. Trapping signals trap Specifies an action on receipt of a signal; also useful for debugging. A signal is simply a message sent to a process, either by the kernel or another process, telling it to take some specified action (usually to terminate). For example, hitting a Control−C, sends a user interrupt, an INT signal, to a running program. trap '' 2 # Ignore interrupt 2 (Control−C), with no action specified. trap 'echo "Control−C disabled."' 2 # Message when Control−C pressed. Example 30−5. Trapping at exit #!/bin/bash # Hunting variables with a trap. trap 'echo Variable Listing −−− a = $a b = $b' EXIT # EXIT is the name of the signal generated upon exit from a script. # # The command specified by the "trap" doesn't execute until #+ the appropriate signal is sent. echo "This prints before the \"trap\" −−" echo "even though the script sees the \"trap\" first." echo a=39 b=36 exit 0 # Note that commenting out the 'exit' command makes no difference, #+ since the script exits in any case after running out of commands. Example 30−6. Cleaning up after Control−C #!/bin/bash # logon.sh: A quick 'n dirty script to check whether you are on−line yet. TRUE=1 LOGFILE=/var/log/messages # Note that $LOGFILE must be readable (chmod 644 /var/log/messages). TEMPFILE=temp.$$ # Create a "unique" temp file name, using process id of the script. KEYWORD=address # At logon, the line "remote IP address xxx.xxx.xxx.xxx" # appended to /var/log/messages. ONLINE=22 Chapter 30. Debugging 353 Advanced Bash−Scripting Guide USER_INTERRUPT=13 CHECK_LINES=100 # How many lines in log file to check. trap 'rm −f $TEMPFILE; exit $USER_INTERRUPT' TERM INT # Cleans up the temp file if script interrupted by control−c. echo while [ $TRUE ] #Endless loop. do tail −$CHECK_LINES $LOGFILE> $TEMPFILE # Saves last 100 lines of system log file as temp file. # Necessary, since newer kernels generate many log messages at log on. search=`grep $KEYWORD $TEMPFILE` # Checks for presence of the "IP address" phrase, # indicating a successful logon. if [ ! −z "$search" ] # Quotes necessary because of possible spaces. then echo "On−line" rm −f $TEMPFILE # Clean up temp file. exit $ONLINE else echo −n "." # −n option to echo suppresses newline, # so you get continuous rows of dots. fi sleep 1 done # Note: if you change the KEYWORD variable to "Exit", # this script can be used while on−line to check for an unexpected logoff. # Exercise: Change the script, as per the above note, # and prettify it. exit 0 # Nick Drage suggests an alternate method: while true do ifconfig ppp0 | grep UP 1> /dev/null && echo "connected" && exit 0 echo −n "." # Prints dots (.....) until connected. sleep 2 done # Problem: Hitting Control−C to terminate this process may be insufficient. # (Dots may keep on echoing.) # Exercise: Fix this. # Stephane Chazelas has yet another alternative: CHECK_INTERVAL=1 while ! tail −1 "$LOGFILE" | grep −q "$KEYWORD" do echo −n . sleep $CHECK_INTERVAL Chapter 30. Debugging 354 Advanced Bash−Scripting Guide done echo "On−line" # Exercise: Discuss the strengths and weaknesses # of each of these various approaches. The DEBUG argument to trap causes a specified action to execute after every command in a script. This permits tracing variables, for example. Example 30−7. Tracing a variable #!/bin/bash trap 'echo "VARIABLE−TRACE> \$variable = \"$variable\""' DEBUG # Echoes the value of $variable after every command. variable=29 echo "Just initialized \"\$variable\" to $variable." let "variable *= 3" echo "Just multiplied \"\$variable\" by 3." # # # # The "trap 'commands' DEBUG" construct would be more useful in the context of a complex script, where placing multiple "echo $variable" statements might be clumsy and time−consuming. # Thanks, Stephane Chazelas for the pointer. exit 0 Of course, the trap command has other uses aside from debugging. Example 30−8. Running multiple processes (on an SMP box) #!/bin/bash # multiple−processes.sh: Run multiple processes on an SMP box. # Script written by Vernia Damiano. # Used with permission. # Must call script with at least one integer parameter #+ (number of concurrent processes). # All other parameters are passed through to the processes started. INDICE=8 TEMPO=5 E_BADARGS=65 # Total number of process to start # Maximum sleep time per process # No arg(s) passed to script. if [ $# −eq 0 ] # Check for at least one argument passed to script. then echo "Usage: `basename $0` number_of_processes [passed params]" exit $E_BADARGS fi NUMPROC=$1 # Number of concurrent process Chapter 30. Debugging 355 Advanced Bash−Scripting Guide shift PARAMETRI=( "$@" ) # Parameters of each process function avvia() { local temp local index temp=$RANDOM index=$1 shift let "temp %= $TEMPO" let "temp += 1" echo "Starting $index Time:$temp" "$@" sleep ${temp} echo "Ending $index" kill −s SIGRTMIN $$ } function parti() { if [ $INDICE −gt 0 ] ; then avvia $INDICE "${PARAMETRI[@]}" & let "INDICE−−" else trap : SIGRTMIN fi } trap parti SIGRTMIN while [ "$NUMPROC" −gt 0 ]; do parti; let "NUMPROC−−" done wait trap − SIGRTMIN exit $? : << SCRIPT_AUTHOR_COMMENTS I had the need to run a program, with specified options, on a number of different files, using a SMP machine. So I thought [I'd] keep running a specified number of processes and start a new one each time . . . one of these terminates. The "wait" instruction does not help, since it waits for a given process or *all* process started in background. So I wrote [this] bash script that can do the job, using the "trap" instruction. −−Vernia Damiano SCRIPT_AUTHOR_COMMENTS trap '' SIGNAL (two adjacent apostrophes) disables SIGNAL for the remainder of the script. trap SIGNAL restores the functioning of SIGNAL once more. This is useful to protect a critical portion of a script from an undesirable interrupt. trap '' 2 command command command trap 2 # Signal 2 is Control−C, now disabled. # Reenables Control−C Chapter 30. Debugging 356 Advanced Bash−Scripting Guide Chapter 30. Debugging 357 Chapter 31. Options Options are settings that change shell and/or script behavior. The set command enables options within a script. At the point in the script where you want the options to take effect, use set −o option−name or, in short form, set −option−abbrev. These two forms are equivalent. #!/bin/bash set −o verbose # Echoes all commands before executing. #!/bin/bash set −v # Exact same effect as above. To disable an option within a script, use set +o option−name or set +option−abbrev. #!/bin/bash set −o verbose # Command echoing on. command ... command set +o verbose # Command echoing off. command # Not echoed. set −v # Command echoing on. command ... command set +v # Command echoing off. command exit 0 An alternate method of enabling options in a script is to specify them immediately following the #! script header. #!/bin/bash −x # # Body of script follows. Chapter 31. Options 358 Advanced Bash−Scripting Guide It is also possible to enable script options from the command line. Some options that will not work with set are available this way. Among these are −i, force script to run interactive. bash −v script−name bash −o verbose script−name The following is a listing of some useful options. They may be specified in either abbreviated form (preceded by a single dash) or by complete name (preceded by a double dash or by −o). Table 31−1. Bash options Abbreviation −C −D −a −b −c ... −e −f −i −n −o Option−Name −o posix −p −r −s −t −u −v −x − −− Name Effect noclobber Prevent overwriting of files by redirection (may be overridden by >|) (none) List double−quoted strings prefixed by $, but do not execute commands in script allexport Export all defined variables notify Notify when jobs running in background terminate (not of much use in a script) (none) Read commands from ... errexit Abort script at first error, when a command exits with non−zero status (except in until or while loops, if−tests, list constructs) noglob Filename expansion (globbing) disabled interactive Script runs in interactive mode noexec Read commands in script, but do not execute them (syntax check) (none) Invoke the Option−Name option POSIX Change the behavior of Bash, or invoked script, to conform to POSIX standard. privileged Script runs as "suid" (caution!) restricted Script runs in restricted mode (see Chapter 21). stdin Read commands from stdin (none) Exit after first command nounset Attempt to use undefined variable outputs error message, and forces an exit verbose Print each command to stdout before executing it xtrace Similar to −v, but expands commands (none) End of options flag. All other arguments are positional parameters. (none) Unset positional parameters. If arguments given (−− arg1 arg2), positional parameters set to arguments. Chapter 31. Options 359 Chapter 32. Gotchas Turandot: Gli enigmi sono tre, la morte una! Caleph: No, no! Gli enigmi sono tre, una la vita! Puccini Assigning reserved words or characters to variable names. case=value0 # Causes problems. 23skidoo=value1 # Also problems. # Variable names starting with a digit are reserved by the shell. # Try _23skidoo=value1. Starting variables with an underscore is o.k. # However... _=25 echo $_ xyz((!*=value2 using just the underscore will not work. # $_ is a special variable set to last arg of last command. # Causes severe problems. Using a hyphen or other reserved characters in a variable name. var−1=23 # Use 'var_1' instead. Using the same name for a variable and a function. This can make a script difficult to understand. do_something () { echo "This function does something with \"$1\"." } do_something=do_something do_something do_something # All this is legal, but highly confusing. Using whitespace inappropriately. In contrast to other programming languages, Bash can be quite finicky about whitespace. var1 = 23 # 'var1=23' is correct. # On line above, Bash attempts to execute command "var1" # with the arguments "=" and "23". let c = $a − $b # 'let c=$a−$b' or 'let "c = $a − $b"' are correct. if [ $a −le 5] # if [ $a −le 5 ] is correct. # if [ "$a" −le 5 ] is even better. # [[ $a −le 5 ]] also works. Assuming uninitialized variables (variables before a value is assigned to them) are "zeroed out". An uninitialized variable has a value of "null", not zero. #!/bin/bash Chapter 32. Gotchas 360 Advanced Bash−Scripting Guide echo "uninitialized_var = $uninitialized_var" # uninitialized_var = Mixing up = and −eq in a test. Remember, = is for comparing literal variables and −eq for integers. if [ "$a" = 273 ] if [ "$a" −eq 273 ] # Is $a an integer or string? # If $a is an integer. # Sometimes you can mix up −eq and = without adverse consequences. # However... a=273.0 # Not an integer. if [ "$a" = 273 ] then echo "Comparison works." else echo "Comparison does not work." fi # Comparison does not work. # Same with a=" 273" and a="0273". # Likewise, problems trying to use "−eq" with non−integer values. if [ "$a" −eq 273.0 ] then echo "a = $a' fi # Aborts with an error message. # test.sh: [: 273.0: integer expression expected Misusing string comparison operators. Example 32−1. Numerical and string comparison are not equivalent #!/bin/bash # bad−op.sh: Trying to use a string comparison on integers. echo number=1 # The following "while loop" has two errors: #+ one blatant, and the other subtle. while [ "$number" < 5 ] # Wrong! Should be: while [ "$number" −lt 5 ] do echo −n "$number " let "number += 1" done # Attempt to run this bombs with the error message: #+ bad−op.sh: line 10: 5: No such file or directory # Within single brackets, "<" must be escaped, #+ and even then, it's still wrong for comparing integers. echo "−−−−−−−−−−−−−−−−−−−−−" Chapter 32. Gotchas 361 Advanced Bash−Scripting Guide while [ "$number" \< 5 ] do echo −n "$number " let "number += 1" done # # # #+ #+ 1234 This *seems to work, but . . . it actually does an ASCII comparison, rather than a numerical one. echo; echo "−−−−−−−−−−−−−−−−−−−−−" # This can cause problems. For example: lesser=5 greater=105 if [ "$greater" \< "$lesser" ] then echo "$greater is less than $lesser" fi # 105 is less than 5 # In fact, "105" actually is less than "5" #+ in a string comparison (ASCII sort order). echo exit 0 Sometimes variables within "test" brackets ([ ]) need to be quoted (double quotes). Failure to do so may cause unexpected behavior. See Example 7−6, Example 16−4, and Example 9−6. Commands issued from a script may fail to execute because the script owner lacks execute permission for them. If a user cannot invoke a command from the command line, then putting it into a script will likewise fail. Try changing the attributes of the command in question, perhaps even setting the suid bit (as root, of course). Attempting to use − as a redirection operator (which it is not) will usually result in an unpleasant surprise. command1 2> − | command2 # ...will not work. command1 2>& − | command2 Thanks, S.C. # Trying to redirect error output of command1 into a pipe... # Also futile. Using Bash version 2+ functionality may cause a bailout with error messages. Older Linux machines may have version 1.XX of Bash as the default installation. #!/bin/bash minimum_version=2 # Since Chet Ramey is constantly adding features to Bash, # you may set $minimum_version to 2.XX, or whatever is appropriate. E_BAD_VERSION=80 if [ "$BASH_VERSION" \< "$minimum_version" ] then echo "This script works only with Bash, version $minimum or greater." echo "Upgrade strongly recommended." exit $E_BAD_VERSION fi Chapter 32. Gotchas 362 Advanced Bash−Scripting Guide ... Using Bash−specific functionality in a Bourne shell script (#!/bin/sh) on a non−Linux machine may cause unexpected behavior. A Linux system usually aliases sh to bash, but this does not necessarily hold true for a generic Unix machine. Using undocumented features in Bash turns out to be a dangerous practice. In previous releases of this book there were several scripts that depended on the "feature" that, although the maximum value of an exit or return value was 255, that limit did not apply to negative integers. Unfortunately, in version 2.05b and later, that loophole disappeared. See Example 23−8. A script with DOS−type newlines (\r\n) will fail to execute, since #!/bin/bash\r\n is not recognized, not the same as the expected #!/bin/bash\n. The fix is to convert the script to Unix−style newlines. #!/bin/bash echo "Here" unix2dos $0 chmod 755 $0 # Script changes itself to DOS format. # Change back to execute permission. # The 'unix2dos' command removes execute permission. # Script tries to run itself again. # But it won't work as a DOS file. ./$0 echo "There" exit 0 A shell script headed by #!/bin/sh may not run in full Bash−compatibility mode. Some Bash−specific functions might be disabled. Scripts that need complete access to all the Bash−specific extensions should start with #!/bin/bash. Putting whitespace in front of the terminating limit string of a here document will cause unexpected behavior in a script. A script may not export variables back to its parent process, the shell, or to the environment. Just as we learned in biology, a child process can inherit from a parent, but not vice versa. WHATEVER=/home/bozo export WHATEVER exit 0 bash$ echo $WHATEVER bash$ Sure enough, back at the command prompt, $WHATEVER remains unset. Setting and manipulating variables in a subshell, then attempting to use those same variables outside the scope of the subshell will result an unpleasant surprise. Chapter 32. Gotchas 363 Advanced Bash−Scripting Guide Example 32−2. Subshell Pitfalls #!/bin/bash # Pitfalls of variables in a subshell. outer_variable=outer echo echo "outer_variable = $outer_variable" echo ( # Begin subshell echo "outer_variable inside subshell = $outer_variable" inner_variable=inner # Set echo "inner_variable inside subshell = $inner_variable" outer_variable=inner # Will value change globally? echo "outer_variable inside subshell = $outer_variable" # End subshell ) echo echo "inner_variable outside subshell = $inner_variable" echo "outer_variable outside subshell = $outer_variable" echo exit 0 # Unset. # Unchanged. Piping echo output to a read may produce unexpected results. In this scenario, the read acts as if it were running in a subshell. Instead, use the set command (as in Example 11−15). Example 32−3. Piping the output of echo to a read #!/bin/bash # badread.sh: # Attempting to use 'echo and 'read' #+ to assign variables non−interactively. a=aaa b=bbb c=ccc echo "one two three" | read a b c # Try to reassign a, b, and c. echo echo "a = $a" echo "b = $b" echo "c = $c" # Reassignment # a = aaa # b = bbb # c = ccc failed. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Try the following alternative. var=`echo "one two three"` set −− $var Chapter 32. Gotchas 364 Advanced Bash−Scripting Guide a=$1; b=$2; c=$3 echo "−−−−−−−" echo "a = $a" echo "b = $b" echo "c = $c" # Reassignment # a = one # b = two # c = three succeeded. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # # Note also that an echo to a 'read' works within a subshell. However, the value of the variable changes *only* within the subshell. # Starting all over again. a=aaa b=bbb c=ccc echo; echo echo "one two three" | ( read a b c; echo "Inside subshell: "; echo "a = $a"; echo "b = $b"; echo "c = $c" ) # a = one # b = two # c = three echo "−−−−−−−−−−−−−−−−−" echo "Outside subshell: " echo "a = $a" # a = aaa echo "b = $b" # b = bbb echo "c = $c" # c = ccc echo exit 0 In fact, as Anthony Richardson points out, piping to any loop can cause a similar problem. # Loop piping troubles. # This example by Anthony Richardson. foundone=false find $HOME −type f −atime +30 −size 100k | while true do read f echo "$f is over 100KB and has not been accessed in over 30 days" echo "Consider moving the file to archives." foundone=true done # foundone will always be false here since it is #+ set to true inside a subshell if [ $foundone = false ] then echo "No files need archiving." fi # =====================Now, here is the correct way:================= foundone=false for f in $(find $HOME −type f −atime +30 −size 100k) # No pipe here. do echo "$f is over 100KB and has not been accessed in over 30 days" Chapter 32. Gotchas 365 Advanced Bash−Scripting Guide echo "Consider moving the file to archives." foundone=true done if [ $foundone = false ] then echo "No files need archiving." fi A related problem occurs when trying to write the stdout of a tail −f piped to grep. tail −f /var/log/messages | grep "$ERROR_MSG" >> error.log # The "error.log" file will not have anything written to it. −− Using "suid" commands within scripts is risky, as it may compromise system security. [62] Using shell scripts for CGI programming may be problematic. Shell script variables are not "typesafe", and this can cause undesirable behavior as far as CGI is concerned. Moreover, it is difficult to "cracker−proof" shell scripts. Bash does not handle the double slash (//) string correctly. Bash scripts written for Linux or BSD systems may need fixups to run on a commercial Unix machine. Such scripts often employ GNU commands and filters which have greater functionality than their generic Unix counterparts. This is particularly true of such text processing utilites as tr. Danger is near thee −− Beware, beware, beware, beware. Many brave hearts are asleep in the deep. So beware −− Beware. A.J. Lamb and H.W. Petrie Chapter 32. Gotchas 366 Chapter 33. Scripting With Style Get into the habit of writing shell scripts in a structured and systematic manner. Even "on−the−fly" and "written on the back of an envelope" scripts will benefit if you take a few minutes to plan and organize your thoughts before sitting down and coding. Herewith are a few stylistic guidelines. This is not intended as an Official Shell Scripting Stylesheet. 33.1. Unofficial Shell Scripting Stylesheet • Comment your code. This makes it easier for others to understand (and appreciate), and easier for you to maintain. PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}" # It made perfect sense when you wrote it last year, but now it's a complete mystery. # (From Antek Sawicki's "pw.sh" script.) Add descriptive headers to your scripts and functions. #!/bin/bash #************************************************# # xyz.sh # # written by Bozo Bozeman # # July 05, 2001 # # # # Clean up project files. # #************************************************# BADDIR=65 projectdir=/home/bozo/projects # No such directory. # Directory to clean up. # # # # # # # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # cleanup_pfiles () # Removes all files in designated directory. # Parameter: $target_directory # Returns: 0 on success, $BADDIR if something went wrong. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− cleanup_pfiles () { if [ ! −d "$1" ] # Test if target directory exists. then echo "$1 is not a directory." return $BADDIR fi rm −f "$1"/* return 0 # Success. } cleanup_pfiles $projectdir exit 0 Be sure to put the #!/bin/bash at the beginning of the first line of the script, preceding any comment headers. • Avoid using "magic numbers", [63] that is, "hard−wired" literal constants. Use meaningful variable Chapter 33. Scripting With Style 367 Advanced Bash−Scripting Guide names instead. This makes the script easier to understand and permits making changes and updates without breaking the application. if [ −f /var/log/messages ] then ... fi # A year later, you decide to change the script to check /var/log/syslog. # It is now necessary to manually change the script, instance by instance, # and hope nothing breaks. # A better way: LOGFILE=/var/log/messages if [ −f "$LOGFILE" ] then ... fi # Only line that needs to be changed. • Choose descriptive names for variables and functions. fl=`ls −al $dirname` file_listing=`ls −al $dirname` # Cryptic. # Better. MAXVAL=10 # All caps used for a script constant. while [ "$index" −le "$MAXVAL" ] ... E_NOTFOUND=75 if [ ! −e "$filename" ] then echo "File $filename not found." exit $E_NOTFOUND fi # Uppercase for an errorcode, # and name begins with "E_". MAIL_DIRECTORY=/var/spool/mail/bozo export MAIL_DIRECTORY # Uppercase for an environmental variable. GetAnswer () { prompt=$1 echo −n $prompt read answer return $answer } # Mixed case works well for a function. GetAnswer "What is your favorite number? " favorite_number=$? echo $favorite_number _uservariable=23 # Permissable, but not recommended. # It's better for user−defined variables not to start with an underscore. # Leave that for system variables. • Use exit codes in a systematic and meaningful way. E_WRONG_ARGS=65 ... ... exit $E_WRONG_ARGS Chapter 33. Scripting With Style 368 Advanced Bash−Scripting Guide See also Appendix D. • Break complex scripts into simpler modules. Use functions where appropriate. See Example 35−4. • Don't use a complex construct where a simpler one will do. COMMAND if [ $? −eq 0 ] ... # Redundant and non−intuitive. if COMMAND ... # More concise (if perhaps not quite as legible). ... reading the UNIX source code to the Bourne shell (/bin/sh). I was shocked at how much simple algorithms could be made cryptic, and therefore useless, by a poor choice of code style. I asked myself, "Could someone be proud of this code?" Landon Noll Chapter 33. Scripting With Style 369 Chapter 34. Miscellany Nobody really knows what the Bourne shell's grammar is. Even examination of the source code is little help. Tom Duff 34.1. Interactive and non−interactive shells and scripts An interactive shell reads commands from user input on a tty. Among other things, such a shell reads startup files on activation, displays a prompt, and enables job control by default. The user can interact with the shell. A shell running a script is always a non−interactive shell. All the same, the script can still access its tty. It is even possible to emulate an interactive shell in a script. #!/bin/bash MY_PROMPT='$ ' while : do echo −n "$MY_PROMPT" read line eval "$line" done exit 0 # This example script, and much of the above explanation supplied by # Stephane Chazelas (thanks again). Let us consider an interactive script to be one that requires input from the user, usually with read statements (see Example 11−2). "Real life" is actually a bit messier than that. For now, assume an interactive script is bound to a tty, a script that a user has invoked from the console or an xterm. Init and startup scripts are necessarily non−interactive, since they must run without human intervention. Many administrative and system maintenance scripts are likewise non−interactive. Unvarying repetitive tasks cry out for automation by non−interactive scripts. Non−interactive scripts can run in the background, but interactive ones hang, waiting for input that never comes. Handle that difficulty by having an expect script or embedded here document feed input to an interactive script running as a background job. In the simplest case, redirect a file to supply input to a read statement (read variable >) following to end of each script tracked. date>> $SAVE_FILE echo $0>> $SAVE_FILE echo>> $SAVE_FILE #Date and time. #Script name. #Blank line as separator. # Of course, SAVE_FILE defined and exported as environmental variable in ~/.bashrc # (something like ~/.scripts−run) • The >> operator appends lines to a file. What if you wish to prepend a line to an existing file, that is, to paste it in at the beginning? file=data.txt title="***This is the title line of data text file***" echo $title | cat − $file >$file.new # "cat −" concatenates stdout to $file. # End result is #+ to write a new file with $title appended at *beginning*. Of course, sed can also do this. • A shell script may act as an embedded command inside another shell script, a Tcl or wish script, or even a Makefile. It can be invoked as an external shell command in a C program using the system() call, i.e., system("script_name");. • Put together files containing your favorite and most useful definitions and functions. As necessary, "include" one or more of these "library files" in scripts with either the dot (.) or source command. # SCRIPT LIBRARY # −−−−−− −−−−−−− # Note: # No "#!" here. # No "live code" either. # Useful variable definitions ROOT_UID=0 E_NOTROOT=101 MAXRETVAL=255 SUCCESS=0 FAILURE=−1 # Root has $UID 0. # Not root user error. # Maximum (positive) return value of a function. # Functions Chapter 34. Miscellany 382 Advanced Bash−Scripting Guide Usage () { if [ −z "$1" ] then msg=filename else msg=$@ fi # "Usage:" message. # No arg passed. echo "Usage: `basename $0` "$msg"" } Check_if_root () # Check if root running script. { # From "ex39.sh" example. if [ "$UID" −ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi } CreateTempfileName () # Creates a "unique" temp filename. { # From "ex51.sh" example. prefix=temp suffix=`eval date +%s` Tempfilename=$prefix.$suffix } isalpha2 () # Tests whether *entire string* is alphabetic. { # From "isalpha.sh" example. [ $# −eq 1 ] || return $FAILURE case $1 in *[!a−zA−Z]*|"") return $FAILURE;; *) return $SUCCESS;; esac # Thanks, S.C. } abs () { E_ARGERR=−999999 if [ −z "$1" ] then return $E_ARGERR fi if [ "$1" −ge 0 ] then absval=$1 else let "absval = (( 0 − $1 ))" fi return $absval } # Absolute value. # Caution: Max return value = 255. # Need arg passed. # Obvious error value returned. # # # # # If non−negative, stays as−is. Otherwise, change sign. Chapter 34. Miscellany 383 Advanced Bash−Scripting Guide tolower () { if [ −z "$1" ] then echo "(null)" return fi # Converts string(s) passed as argument(s) #+ to lowercase. # #+ #+ #+ If no argument(s) passed, send error message (C−style void−pointer error message) and return from function. echo "$@" | tr A−Z a−z # Translate all passed arguments ($@). return # Use command substitution to set a variable to function output. # For example: # oldvar="A seT of miXed−caSe LEtTerS" # newvar=`tolower "$oldvar"` # echo "$newvar" # a set of mixed−case letters # # Exercise: Rewrite this function to change lowercase passed argument(s) # to uppercase ... toupper() [easy]. } • Use special−purpose comment headers to increase clarity and legibility in scripts. ## Caution. rm −rf *.zzy ## The "−rf" options to "rm" are very dangerous, ##+ especially with wildcards. #+ # #+ #+ Line continuation. This is line 1 of a multi−line comment, and this is the final line. #* Note. #o List item. #> Another point of view. while [ "$var1" != "end" ] #> while test "$var1" != "end" • A particularly clever use of if−test constructs is commenting out blocks of code. #!/bin/bash COMMENT_BLOCK= # Try setting the above variable to something or other #+ for an unpleasant surprise. if [ $COMMENT_BLOCK ]; then Comment block −− ================================= This is a comment line. This is another comment line. This is yet another comment line. ================================= echo "This will not echo." Comment blocks are error−free! Whee! Chapter 34. Miscellany 384 Advanced Bash−Scripting Guide fi echo "No more comments, please." exit 0 Compare this with using here documents to comment out code blocks. • Using the $? exit status variable, a script may test if a parameter contains only digits, so it can be treated as an integer. #!/bin/bash SUCCESS=0 E_BADINPUT=65 test "$1" −ne 0 −o "$1" −eq 0 2>/dev/null # An integer is either equal to 0 or not equal to 0. # 2>/dev/null suppresses error message. if [ $? −ne "$SUCCESS" ] then echo "Usage: `basename $0` integer−input" exit $E_BADINPUT fi let "sum = $1 + 25" echo "Sum = $sum" # Would give error if $1 not integer. # Any variable, not just a command line parameter, can be tested this way. exit 0 • The 0 − 255 range for function return values is a severe limitation. Global variables and other workarounds are often problematic. An alternative method for a function to communicate a value back to the main body of the script is to have the function write to stdout (usually with echo) the "return value," and assign this to a variable. This is actually a variant of command substitution. Example 34−11. Return value trickery #!/bin/bash # multiplication.sh multiply () { local product=1 until [ −z "$1" ] do let "product *= $1" shift done echo $product } mult1=15383; mult2=25211 val1=`multiply $mult1 $mult2` echo "$mult1 X $mult2 = $val1" # 387820813 # Until uses up arguments passed... # Multiplies params passed. # Will accept a variable number of args. # Will not echo to stdout, #+ since this will be assigned to a variable. Chapter 34. Miscellany 385 Advanced Bash−Scripting Guide mult1=25; mult2=5; mult3=20 val2=`multiply $mult1 $mult2 $mult3` echo "$mult1 X $mult2 X $mult3 = $val2" # 2500 mult1=188; mult2=37; mult3=25; mult4=47 val3=`multiply $mult1 $mult2 $mult3 $mult4` echo "$mult1 X $mult2 X $mult3 X mult4 = $val3" # 8173300 exit 0 The same technique also works for alphanumeric strings. This means that a function can "return" a non−numeric value. capitalize_ichar () { string0="$@" firstchar=${string0:0:1} string1=${string0:1} # Capitalizes initial character #+ of argument string(s) passed. # Accepts multiple arguments. # First character. # Rest of string(s). FirstChar=`echo "$firstchar" | tr a−z A−Z` # Capitalize first character. echo "$FirstChar$string1" } newstring=`capitalize_ichar "each sentence should start with a capital letter."` echo "$newstring" # Each sentence should start with a capital letter. # Output to stdout. It is even possible for a function to "return" multiple values with this method. Example 34−12. Even more return value trickery #!/bin/bash # sum−product.sh # A function may "return" more than one value. sum_and_product () # Calculates both sum and product of passed args. { echo $(( $1 + $2 )) $(( $1 * $2 )) # Echoes to stdout each calculated value, separated by space. } echo echo "Enter first number " read first echo echo "Enter second number " read second echo retval=`sum_and_product $first $second` # Assigns output of function. Chapter 34. Miscellany 386 Advanced Bash−Scripting Guide sum=`echo "$retval" | awk '{print $1}'` product=`echo "$retval" | awk '{print $2}'` echo "$first + $second = $sum" echo "$first * $second = $product" echo exit 0 # Assigns first field. # Assigns second field. • Next in our bag of trick are techniques for passing an array to a function, then "returning" an array back to the main body of the script. Passing an array involves loading the space−separated elements of the array into a variable with command substitution. Getting an array back as the "return value" from a function uses the previously mentioned strategem of echoing the array in the function, then invoking command substitution and the ( ... ) operator to assign it to an array. Example 34−13. Passing and returning arrays #!/bin/bash # array−function.sh: Passing an array to a function and... # "returning" an array from a function Pass_Array () { local passed_array # Local variable. passed_array=( `echo "$1"` ) echo "${passed_array[@]}" # List all the elements of the new array #+ declared and set within the function. } original_array=( element1 element2 element3 element4 element5 ) echo echo "original_array = ${original_array[@]}" # List all elements of original array. # This is the trick that permits passing an array to a function. # ********************************** argument=`echo ${original_array[@]}` # ********************************** # Pack a variable #+ with all the space−separated elements of the original array. # # Note that attempting to just pass the array itself will not work. # This is the trick that allows grabbing an array as a "return value". # ***************************************** returned_array=( `Pass_Array "$argument"` ) # ***************************************** # Assign 'echoed' output of function to array variable. echo "returned_array = ${returned_array[@]}" Chapter 34. Miscellany 387 Advanced Bash−Scripting Guide echo "=============================================================" # Now, try it again, #+ attempting to access (list) the array from outside the function. Pass_Array "$argument" # The function itself lists the array, but... #+ accessing the array from outside the function is forbidden. echo "Passed array (within function) = ${passed_array[@]}" # NULL VALUE since this is a variable local to the function. echo exit 0 For a more elaborate example of passing arrays to functions, see Example A−11. • Using the double parentheses construct, it is possible to use C−like syntax for setting and incrementing variables and in for and while loops. See Example 10−12 and Example 10−17. • A useful scripting technique is to repeatedly feed the output of a filter (by piping) back to the same filter, but with a different set of arguments and/or options. Especially suitable for this are tr and grep. # From "wstrings.sh" example. wlist=`strings "$1" | tr A−Z a−z | tr '[:space:]' Z | \ tr −cs '[:alpha:]' Z | tr −s '\173−\377' Z | tr Z ' '` Example 34−14. Fun with anagrams #!/bin/bash # agram.sh: Playing games with anagrams. # Find anagrams of... LETTERSET=etaoinshrdlu anagram "$LETTERSET" | grep '.......' | grep '^is' | grep −v 's$' | grep −v 'ed$' # Possible to add many # Find all anagrams of the letterset... # With at least 7 letters, # starting with 'is' # no plurals # no past tense verbs combinations of conditions. # Uses "anagram" utility #+ that is part of the author's "yawl" word list package. # http://ibiblio.org/pub/Linux/libs/yawl−0.3.tar.gz exit 0 bash$ sh agram.sh islander isolate isolead isotheral # End of code. See also Example 28−3, Example 12−21, and Example A−10. • Use "anonymous here documents" to comment out blocks of code, to save having to individually comment out each line with a #. See Example 17−11. Chapter 34. Miscellany 388 Advanced Bash−Scripting Guide • Running a script on a machine that relies on a command that might not be installed is dangerous. Use whatis to avoid potential problems with this. CMD=command1 PlanB=command2 # First choice. # Fallback option. command_test=$(whatis "$CMD" | grep 'nothing appropriate') # If 'command1' not found on system , 'whatis' will return #+ "command1: nothing appropriate." if [[ −z "$command_test" ]] then $CMD option1 option2 else $PlanB fi # Check whether command present. # Run command1 with options. # Otherwise, #+ run command2. • The run−parts command is handy for running a set of command scripts in sequence, particularly in combination with cron or at. • It would be nice to be able to invoke X−Windows widgets from a shell script. There happen to exist several packages that purport to do so, namely Xscript, Xmenu, and widtools. The first two of these no longer seem to be maintained. Fortunately, it is still possible to obtain widtools here. The widtools (widget tools) package requires the XForms library to be installed. Additionally, the Makefile needs some judicious editing before the package will build on a typical Linux system. Finally, three of the six widgets offered do not work (and, in fact, segfault). The dialog family of tools offers a method of calling "dialog" widgets from a shell script. The original dialog utility works in a text console, but its successors, gdialog, Xdialog, and kdialog use X−Windows−based widget sets. Example 34−15. Widgets invoked from a shell script #!/bin/bash # dialog.sh: Using 'gdialog' widgets. # Must have 'gdialog' installed on your system to run this script. # This script was inspired by the following article. # "Scripting for X Productivity," by Marco Fioretti, # LINUX JOURNAL, Issue 113, September 2003, pp. 86−9. # Thank you, all you good people at LJ. # Input error in dialog box. E_INPUT=65 # Dimensions of display, input widgets. HEIGHT=50 WIDTH=60 # Output file name (constructed out of script name). OUTFILE=$0.output # Display this script in a text widget. gdialog −−title "Displaying: $0" −−textbox $0 $HEIGHT $WIDTH Chapter 34. Miscellany 389 Advanced Bash−Scripting Guide # Now, we'll try saving input in a file. echo −n "VARIABLE=\"" > $OUTFILE # Quote it, in case of whitespace #+ in the input. gdialog −−title "User Input" −−inputbox "Enter variable, please:" \ $HEIGHT $WIDTH 2>> $OUTFILE if [ "$?" −eq 0 ] # It's good practice to check exit status. then echo "Executed \"dialog box\" without errors." else echo "Error(s) in \"dialog box\" execution." # Or, clicked on "Cancel", instead of "OK" button. rm $OUTFILE exit $E_INPUT fi echo −n "\"" >> $OUTFILE # End quotes on saved variable. # This command stuck down here in order not to mess up #+ exit status, above. # Now, we'll retrieve and display the saved variable. . $OUTFILE # 'Source' the saved file. echo "The variable input in the \"input box\" was: "$VARIABLE"" rm $OUTFILE # Clean up by removing the temp file. # Some applications may need to retain this file. exit 0 For other methods of scripting with widgets, try Tk or wish (Tcl derivatives), PerlTk (Perl with Tk extensions), tksh (ksh with Tk extensions), XForms4Perl (Perl with XForms extensions), Gtk−Perl (Perl with Gtk extensions), or PyQt (Python with Qt extensions). 34.8. Security Issues A brief warning about script security is appropriate. A shell script may contain a worm, trojan, or even a virus. For that reason, never run as root a script (or permit it to be inserted into the system startup scripts in /etc/rc.d) unless you have obtained said script from a trusted source or you have carefully analyzed it to make certain it does nothing harmful. Various researchers at Bell Labs and other sites, including M. Douglas McIlroy, Tom Duff, and Fred Cohen have investigated the implications of shell script viruses. They conclude that it is all to easy for even a novice, a "script kiddie", to write one. [65] Here is yet another reason to learn scripting. Being able to look at and understand scripts may protect your system from being hacked or damaged. Chapter 34. Miscellany 390 Advanced Bash−Scripting Guide 34.9. Portability Issues This book deals specifically with Bash scripting on a GNU/Linux system. All the same, users of sh and ksh will find much of value here. As it happens, many of the various shells and scripting languages seem to be converging toward the POSIX 1003.2 standard. Invoking Bash with the −−posix option or inserting a set −o posix at the head of a script causes Bash to conform very closely to this standard. Even lacking this measure, most Bash scripts will run as−is under ksh, and vice−versa, since Chet Ramey has been busily porting ksh features to the latest versions of Bash. On a commercial Unix machine, scripts using GNU−specific features of standard commands may not work. This has become less of a problem in the last few years, as the GNU utilities have pretty much displaced their proprietary counterparts even on "big−iron" Unix. Caldera's release of the source to many of the original Unix utilities has accelerated the trend. Bash has certain features that the traditional Bourne shell lacks. Among these are: • Certain extended invocation options • Command substitution using $( ) notation • Certain string manipulation operations • Process substitution • Bash−specific builtins See the Bash F.A.Q. for a complete listing. 34.10. Shell Scripting Under Windows Even users running that other OS can run Unix−like shell scripts, and therefore benefit from many of the lessons of this book. The Cygwin package from Cygnus and the MKS utilities from Mortice Kern Associates add shell scripting capabilities to Windows. Chapter 34. Miscellany 391 Chapter 35. Bash, version 2 The current version of Bash, the one you have running on your machine, is actually version 2.XX.Y. bash$ echo $BASH_VERSION 2.05.b.0(1)−release This update of the classic Bash scripting language added array variables, [66] string and parameter expansion, and a better method of indirect variable references, among other features. Example 35−1. String expansion #!/bin/bash # String expansion. # Introduced with version 2 of Bash. # Strings of the form $'xxx' #+ have the standard escaped characters interpreted. echo $'Ringing bell 3 times \a \a \a' # May only ring once with certain terminals. echo $'Three form feeds \f \f \f' echo $'10 newlines \n\n\n\n\n\n\n\n\n\n' echo $'\102\141\163\150' # Bash # Octal equivalent of characters. exit 0 Example 35−2. Indirect variable references − the new way #!/bin/bash # Indirect variable referencing. # This has a few of the attributes of references in C++. a=letter_of_alphabet letter_of_alphabet=z echo "a = $a" # Direct reference. echo "Now a = ${!a}" # Indirect reference. # The ${!variable} notation is greatly superior to the old "eval var1=\$$var2" echo t=table_cell_3 table_cell_3=24 echo "t = ${!t}" table_cell_3=387 echo "Value of t changed to ${!t}" # t = 24 # 387 Chapter 35. Bash, version 2 392 Advanced Bash−Scripting Guide # This is useful for referencing members of an array or table, #+ or for simulating a multi−dimensional array. # An indexing option would have been nice (sigh). exit 0 Example 35−3. Simple database application, using indirect variable referencing #!/bin/bash # resistor−inventory.sh # Simple database application using indirect variable referencing. # ============================================================== # # Data B1723_value=470 B1723_powerdissip=.25 B1723_colorcode="yellow−violet−brown" B1723_loc=173 B1723_inventory=78 B1724_value=1000 B1724_powerdissip=.25 B1724_colorcode="brown−black−red" B1724_loc=24N B1724_inventory=243 B1725_value=10000 B1725_powerdissip=.25 B1725_colorcode="brown−black−orange" B1725_loc=24N B1725_inventory=89 # ============================================================== # # # # # # Ohms Watts Color bands Where they are How many echo PS3='Enter catalog number: ' echo select catalog_number in "B1723" "B1724" "B1725" do Inv=${catalog_number}_inventory Val=${catalog_number}_value Pdissip=${catalog_number}_powerdissip Loc=${catalog_number}_loc Ccode=${catalog_number}_colorcode echo echo echo echo echo break done echo; echo "Catalog number $catalog_number:" "There are ${!Inv} of [${!Val} ohm / ${!Pdissip} watt] resistors in stock." "These are located in bin # ${!Loc}." "Their color code is \"${!Ccode}\"." Chapter 35. Bash, version 2 393 Advanced Bash−Scripting Guide # Exercises: # −−−−−−−−− # 1) Rewrite this script to read its data from an external file. # 2) Rewrite this script to use arrays, #+ rather than indirect variable referencing. # Which method is more straightforward and intuitive? # Notes: # −−−−− # Shell scripts are inappropriate for anything except the most simple #+ database applications, and even then it involves workarounds and kludges. # Much better is to use a language with native support for data structures, #+ such as C++ or Java (or even Perl). exit 0 Example 35−4. Using arrays and other miscellaneous trickery to deal four random hands from a deck of cards #!/bin/bash # May need to be invoked with #!/bin/bash2 on older machines. # Cards: # deals four random hands from a deck of cards. UNPICKED=0 PICKED=1 DUPE_CARD=99 LOWER_LIMIT=0 UPPER_LIMIT=51 CARDS_IN_SUIT=13 CARDS=52 declare −a Deck declare −a Suits declare −a Cards # It would have been easier and more intuitive # with a single, 3−dimensional array. # Perhaps a future version of Bash will support multidimensional arrays. initialize_Deck () { i=$LOWER_LIMIT until [ "$i" −gt $UPPER_LIMIT ] do Deck[i]=$UNPICKED # Set each card of "Deck" as unpicked. let "i += 1" done echo } initialize_Suits () { Suits[0]=C #Clubs Suits[1]=D #Diamonds Chapter 35. Bash, version 2 394 Advanced Bash−Scripting Guide Suits[2]=H #Hearts Suits[3]=S #Spades } initialize_Cards () { Cards=(2 3 4 5 6 7 8 9 10 J Q K A) # Alternate method of initializing an array. } pick_a_card () { card_number=$RANDOM let "card_number %= $CARDS" if [ "${Deck[card_number]}" −eq $UNPICKED ] then Deck[card_number]=$PICKED return $card_number else return $DUPE_CARD fi } parse_card () { number=$1 let "suit_number = number / CARDS_IN_SUIT" suit=${Suits[suit_number]} echo −n "$suit−" let "card_no = number % CARDS_IN_SUIT" Card=${Cards[card_no]} printf %−4s $Card # Print cards in neat columns. } seed_random () # Seed random number generator. { seed=`eval date +%s` let "seed %= 32766" RANDOM=$seed } deal_cards () { echo cards_picked=0 while [ "$cards_picked" −le $UPPER_LIMIT ] do pick_a_card t=$? if [ "$t" −ne $DUPE_CARD ] then parse_card $t u=$cards_picked+1 # Change back to 1−based indexing (temporarily). let "u %= $CARDS_IN_SUIT" if [ "$u" −eq 0 ] # Nested if/then condition test. then echo Chapter 35. Bash, version 2 395 Advanced Bash−Scripting Guide echo fi # Separate hands. let "cards_picked += 1" fi done echo return 0 } # Structured programming: # entire program logic modularized in functions. #================ seed_random initialize_Deck initialize_Suits initialize_Cards deal_cards exit 0 #================ # Exercise 1: # Add comments to thoroughly document this script. # Exercise 2: # Revise the script to print out each hand sorted in suits. # You may add other bells and whistles if you like. # Exercise 3: # Simplify and streamline the logic of the script. Chapter 35. Bash, version 2 396 Chapter 36. Endnotes 36.1. Author's Note How did I come to write a Bash scripting book? It's a strange tale. It seems that a couple of years back, I needed to learn shell scripting −− and what better way to do that than to read a good book on the subject? I was looking to buy a tutorial and reference covering all aspects of the subject. I was looking for a book that would take difficult concepts, turn them inside out, and explain them in excruciating detail, with well−commented examples. [67] In fact, I was looking for this very book, or something much like it. Unfortunately, it didn't exist, and if I wanted it, I'd have to write it. And so, here we are, folks. This reminds me of the apocryphal story about the mad professor. Crazy as a loon, the fellow was. At the sight of a book, any book −− at the library, at a bookstore, anywhere −− he would become totally obsessed with the idea that he could have written it, should have written it, and done a better job of it to boot. He would thereupon rush home and proceed to do just that, write a book with the very same title. When he died some years later, he allegedly had several thousand books to his credit, probably putting even Asimov to shame. The books might not have been any good −− who knows −− but does that really matter? Here's a fellow who lived his dream, even if he was obsessed by it, driven by it, and I can't help admiring the old coot... 36.2. About the Author Who is this guy anyhow? The author claims no credentials or special qualifications, other than a compulsion to write. [68] This book is somewhat of a departure from his other major work, HOW−2 Meet Women: The Shy Man's Guide to Relationships. He has also written the Software−Building HOWTO. Lately, he has been trying his hand at short fiction. A Linux user since 1995 (Slackware 2.2, kernel 1.2.1), the author has emitted a few software truffles, including the cruft one−time pad encryption utility, the mcalc mortgage calculator, the judge Scrabble® adjudicator, and the yawl word gaming list package. He got his start in programming using FORTRAN IV on a CDC 3800, but is not the least bit nostalgic for those days. Living in a secluded desert community with wife and dog, he cherishes human frailty. 36.3. Where to Go For Help The author will usually, if not too busy (and in a good mood), answer general scripting questions. However, if you have a problem getting a specific script to work, you would be well advised to post to the comp.os.unix.shell Usenet newsgroup. 36.4. Tools Used to Produce This Book 36.4.1. Hardware A used IBM Thinkpad, model 760XL laptop (P166, 104 meg RAM) running Red Hat 7.1/7.3. Sure, it's slow and has a funky keyboard, but it beats the heck out of a No. 2 pencil and a Big Chief tablet. Chapter 36. Endnotes 397 Advanced Bash−Scripting Guide 36.4.2. Software and Printware i. Bram Moolenaar's powerful SGML−aware vim text editor. ii. OpenJade, a DSSSL rendering engine for converting SGML documents into other formats. iii. Norman Walsh's DSSSL stylesheets. iv. DocBook, The Definitive Guide, by Norman Walsh and Leonard Muellner (O'Reilly, ISBN 1−56592−580−7). This is the standard reference for anyone attempting to write a document in Docbook SGML format. 36.5. Credits Community participation made this project possible. The author gratefully acknowledges that writing this book would have been an impossible task without help and feedback from all you people out there. Philippe Martin translated this document into DocBook/SGML. While not on the job at a small French company as a software developer, he enjoys working on GNU/Linux documentation and software, reading literature, playing music, and for his peace of mind making merry with friends. You may run across him somewhere in France or in the Basque Country, or email him at feloy@free.fr. Philippe Martin also pointed out that positional parameters past $9 are possible using {bracket} notation, see Example 4−5. Stephane Chazelas sent a long list of corrections, additions, and example scripts. More than a contributor, he has, in effect, taken on the role of editor for this document. Merci beaucoup! Paulo Marcel Coelho Aragao offered many corrections, both major and minor, and contributed quite a number of helpful suggestions. I would like to especially thank Patrick Callahan, Mike Novak, and Pal Domokos for catching bugs, pointing out ambiguities, and for suggesting clarifications and changes. Their lively discussion of shell scripting and general documentation issues inspired me to try to make this document more readable. I'm grateful to Jim Van Zandt for pointing out errors and omissions in version 0.2 of this document. He also contributed an instructive example script. Many thanks to Jordi Sanfeliu for giving permission to use his fine tree script (Example A−18). Likewise, thanks to Michel Charpentier for permission to use his dc factoring script (Example 12−41). Kudos to Noah Friedman for permission to use his string function script (Example A−19). Emmanuel Rouat suggested corrections and additions on command substitution and aliases. He also contributed a very nice sample .bashrc file (Appendix J). Heiner Steven kindly gave permission to use his base conversion script, Example 12−37. He also made a number of corrections and many helpful suggestions. Special thanks. Rick Boivie contributed the delightfully recursive pb.sh script (Example 34−7) and suggested performance improvements for the monthlypmt.sh script (Example 12−36). Chapter 36. Endnotes 398 Advanced Bash−Scripting Guide Florian Wisser enlightened me on some of the fine points of testing strings (see Example 7−6), and on other matters. Oleg Philon sent suggestions concerning cut and pidof. Michael Zick extended the empty array example to demonstrate some surprising array properties. He also provided other examples of this. Marc−Jano Knopp sent corrections on DOS batch files. Hyun Jin Cha found several typos in the document in the process of doing a Korean translation. Thanks for pointing these out. Andreas Abraham sent in a long list of typographical errors and other corrections. Special thanks! Others contributing scripts, making helpful suggestions, and pointing out errors were Gabor Kiss, Leopold Toetsch, Peter Tillier, Marcus Berglof, Tony Richardson, Nick Drage (script ideas!), Rich Bartell, Jess Thrysoee, Adam Lazur, Bram Moolenaar, Baris Cicek, Greg Keraunen, Keith Matthews, Sandro Magi, Albert Reiner, Dim Segebart, Rory Winston, Lee Bigelow, Wayne Pollock, "jipe," Emilio Conti, Dennis Leeuw, Dan Jacobson, Aurelio Marinho Jargas, Edward Scholtz, Jean Helou, Chris Martin, Lee Maschmeyer, Bruno Haible, Sebastien Godard, Bjön Eriksson, "nyal," John MacDonald, Joshua Tschida, Troy Engel, Manfred Schwarb, Amit Singh, Bill Gradwohl, David Lombard, Jason Parker, Bruce W. Clare, William Park, Vernia Damiano, and David Lawyer (himself an author of four HOWTOs). My gratitude to Chet Ramey and Brian Fox for writing Bash, an elegant and powerful scripting tool. Very special thanks to the hard−working volunteers at the Linux Documentation Project. The LDP hosts a repository of Linux knowledge and lore, and has, to a large extent, enabled the publication of this book. Thanks and appreciation to IBM, Novell, Red Hat, the Free Software Foundation, and all the good people fighting the good fight to keep Open Source software free and open. Thanks most of all to my wife, Anita, for her encouragement and emotional support. Chapter 36. Endnotes 399 Bibliography Edited by Peter Denning, Computers Under Attack: Intruders, Worms, and Viruses, ACM Press, 1990, 0−201−53067−8. This compendium contains a couple of articles on shell script viruses. * Dale Dougherty and Arnold Robbins, Sed and Awk, 2nd edition, O'Reilly and Associates, 1997, 1−156592−225−5. To unfold the full power of shell scripting, you need at least a passing familiarity with sed and awk. This is the standard tutorial. It includes an excellent introduction to "regular expressions". Read this book. * Jeffrey Friedl, Mastering Regular Expressions, O'Reilly and Associates, 2002, 0−596−00289−0. The best, all−around reference on Regular Expressions. * Aeleen Frisch, Essential System Administration, 3rd edition, O'Reilly and Associates, 2002, 0−596−00343−9. This excellent sys admin manual has a decent introduction to shell scripting for sys administrators and does a nice job of explaining the startup and initialization scripts. The long overdue third edition of this classic has finally been released. * Stephen Kochan and Patrick Woods, Unix Shell Programming, Hayden, 1990, 067248448X. The standard reference, though a bit dated by now. * Neil Matthew and Richard Stones, Beginning Linux Programming, Wrox Press, 1996, 1874416680. Good in−depth coverage of various programming languages available for Linux, including a fairly strong chapter on shell scripting. * Bibliography 400 Advanced Bash−Scripting Guide Herbert Mayer, Advanced C Programming on the IBM PC, Windcrest Books, 1989, 0830693637. Excellent coverage of algorithms and general programming practices. * David Medinets, Unix Shell Programming Tools, McGraw−Hill, 1999, 0070397333. Good info on shell scripting, with examples, and a short intro to Tcl and Perl. * Cameron Newham and Bill Rosenblatt, Learning the Bash Shell, 2nd edition, O'Reilly and Associates, 1998, 1−56592−347−2. This is a valiant effort at a decent shell primer, but somewhat deficient in coverage on programming topics and lacking sufficient examples. * Anatole Olczak, Bourne Shell Quick Reference Guide, ASP, Inc., 1991, 093573922X. A very handy pocket reference, despite lacking coverage of Bash−specific features. * Jerry Peek, Tim O'Reilly, and Mike Loukides, Unix Power Tools, 2nd edition, O'Reilly and Associates, Random House, 1997, 1−56592−260−3. Contains a couple of sections of very informative in−depth articles on shell programming, but falls short of being a tutorial. It reproduces much of the regular expressions tutorial from the Dougherty and Robbins book, above. * Clifford Pickover, Computers, Pattern, Chaos, and Beauty, St. Martin's Press, 1990, 0−312−04123−3. A treasure trove of ideas and recipes for computer−based exploration of mathematical oddities. * George Polya, How To Solve It, Princeton University Press, 1973, 0−691−02356−5. The classic tutorial on problem solving methods (i.e., algorithms). Bibliography 401 Advanced Bash−Scripting Guide * Chet Ramey and Brian Fox, The GNU Bash Reference Manual, Network Theory Ltd, 2003, 0−9541617−7−7. This manual is the definitive reference for GNU Bash. The authors of this manual, Chet Ramey and Brian Fox, are the original developers of GNU Bash. For each copy sold the publisher donates $1 to the Free Software Foundation. Arnold Robbins, Bash Reference Card, SSC, 1998, 1−58731−010−5. Excellent Bash pocket reference (don't leave home without it). A bargain at $4.95, but also available for free download on−line in pdf format. * Arnold Robbins, Effective Awk Programming, Free Software Foundation / O'Reilly and Associates, 2000, 1−882114−26−4. The absolute best awk tutorial and reference. The free electronic version of this book is part of the awk documentation, and printed copies of the latest version are available from O'Reilly and Associates. This book has served as an inspiration for the author of this document. * Bill Rosenblatt, Learning the Korn Shell, O'Reilly and Associates, 1993, 1−56592−054−6. This well−written book contains some excellent pointers on shell scripting. * Paul Sheer, LINUX: Rute User's Tutorial and Exposition, 1st edition, , 2002, 0−13−033351−4. Very detailed and readable introduction to Linux system administration. The book is available in print, or on−line. * Ellen Siever and the staff of O'Reilly and Associates, Linux in a Nutshell, 2nd edition, O'Reilly and Associates, 1999, 1−56592−585−8. The all−around best Linux command reference, even has a Bash section. * Bibliography 402 Advanced Bash−Scripting Guide The UNIX CD Bookshelf, 3rd edition, O'Reilly and Associates, 2003, 0−596−00392−7. An array of seven UNIX books on CD ROM, including UNIX Power Tools, Sed and Awk, and Learning the Korn Shell. A complete set of all the UNIX references and tutorials you would ever need at about $130. Buy this one, even if it means going into debt and not paying the rent. * The O'Reilly books on Perl. (Actually, any O'Reilly books.) −−− Fioretti, Marco, "Scripting for X Productivity," LINUX JOURNAL, Issue 113, September, 2003, pp. 86−9. Ben Okopnik's well−written introductory Bash scripting articles in issues 53, 54, 55, 57, and 59 of the Linux Gazette , and his explanation of "The Deep, Dark Secrets of Bash" in issue 56. Chet Ramey's bash − The GNU Shell, a two−part series published in issues 3 and 4 of the Linux Journal, July−August 1994. Mike G's Bash−Programming−Intro HOWTO. Richard's Unix Scripting Universe. Chet Ramey's Bash F.A.Q. Ed Schaefer's Shell Corner in Unix Review. Example shell scripts at Lucc's Shell Scripts . Example shell scripts at SHELLdorado . Example shell scripts at Noah Friedman's script site. Steve Parker's Shell Programming Stuff. Example shell scripts at SourceForge Snippet Library − shell scrips. Bibliography 403 Advanced Bash−Scripting Guide Giles Orr's Bash−Prompt HOWTO. Very nice sed, awk, and regular expression tutorials at The UNIX Grymoire. Eric Pement's sed resources page. The GNU gawk reference manual (gawk is the extended GNU version of awk available on Linux and BSD systems). Trent Fisher's groff tutorial. Mark Komarinski's Printing−Usage HOWTO. There is some nice material on I/O redirection in chapter 10 of the textutils documentation at the University of Alberta site. Rick Hohensee has written the osimpa i386 assembler entirely as Bash scripts. Aurelio Marinho Jargas has written a Regular expression wizard. He has also written an informative book on Regular Expressions, in Portuguese. Ben Tomkins has created the Bash Navigator directory management tool. William Park is working on a project to incorporate certain Awk and Python features into Bash. Rocky Bernstein is in the process of developing a "full−fledged" debugger for Bash. −−− The excellent "Bash Reference Manual", by Chet Ramey and Brian Fox, distributed as part of the "bash−2−doc" package (available as an rpm). See especially the instructive example scripts in this package. The comp.os.unix.shell newsgroup. The comp.os.unix.shell FAQ and its mirror site. Bibliography 404 Advanced Bash−Scripting Guide Assorted comp.os.unix FAQs. The manpages for bash and bash2, date, expect, expr, find, grep, gzip, ln, patch, tar, tr, bc, xargs. The texinfo documentation on bash, dd, m4, gawk, and sed. Bibliography 405 Appendix A. Contributed Scripts These scripts, while not fitting into the text of this document, do illustrate some interesting shell programming techniques. They are useful, too. Have fun analyzing and running them. Example A−1. manview: Viewing formatted manpages #!/bin/bash # manview.sh: Formats the source of a man page for viewing. # This script is useful when writing man page source. # It lets you look at the intermediate results on the fly #+ while working on it. E_WRONGARGS=65 if [ −z "$1" ] then echo "Usage: `basename $0` filename" exit $E_WRONGARGS fi # −−−−−−−−−−−−−−−−−−−−−−−−−−− groff −Tascii −man $1 | less # From the man page for groff. # −−−−−−−−−−−−−−−−−−−−−−−−−−− # If the man page includes tables and/or equations, #+ then the above code will barf. # The following line can handle such cases. # # gtbl < "$1" | geqn −Tlatin1 | groff −Tlatin1 −mtty−char −man # # Thanks, S.C. exit 0 Example A−2. mailformat: Formatting an e−mail message #!/bin/bash # mail−format.sh: Format e−mail messages. # Gets rid of carets, tabs, also fold excessively long lines. # ================================================================= # Standard Check for Script Argument(s) ARGS=1 E_BADARGS=65 E_NOFILE=66 if [ $# −ne $ARGS ] # Correct number of arguments passed to script? then echo "Usage: `basename $0` filename" exit $E_BADARGS fi Appendix A. Contributed Scripts 406 Advanced Bash−Scripting Guide if [ −f "$1" ] # Check if file exists. then file_name=$1 else echo "File \"$1\" does not exist." exit $E_NOFILE fi # ================================================================= MAXWIDTH=70 # Width to fold long lines to. # Delete carets and tabs at beginning of lines, #+ then fold lines to $MAXWIDTH characters. sed ' s/^>// s/^ *>// s/^ *// s/ *// ' $1 | fold −s −−width=$MAXWIDTH # −s option to "fold" breaks lines at whitespace, if possible. # #+ # # #+ This script was inspired by an article in a well−known trade journal extolling a 164K Windows utility with similar functionality. An nice set of text processing utilities and an efficient scripting language provide an alternative to bloated executables. exit 0 Example A−3. rn: A simple−minded file rename utility This script is a modification of Example 12−18. #! /bin/bash # # Very simpleminded filename "rename" utility (based on "lowercase.sh"). # # The "ren" utility, by Vladimir Lanin (lanin@csd2.nyu.edu), #+ does a much better job of this. ARGS=2 E_BADARGS=65 ONE=1 # For getting singular/plural right (see below). if [ $# −ne "$ARGS" ] then echo "Usage: `basename $0` old−pattern new−pattern" # As in "rn gif jpg", which renames all gif files in working directory to jpg. exit $E_BADARGS fi number=0 # Keeps track of how many files actually renamed. for filename in *$1* do if [ −f "$filename" ] then #Traverse all matching files in directory. # If finds match... Appendix A. Contributed Scripts 407 Advanced Bash−Scripting Guide fname=`basename $filename` n=`echo $fname | sed −e "s/$1/$2/"` mv $fname $n let "number += 1" fi done if [ "$number" −eq "$ONE" ] then echo "$number file renamed." else echo "$number files renamed." fi exit 0 # Strip off path. # Substitute new for old in filename. # Rename. # For correct grammar. # Exercises: # −−−−−−−−− # What type of files will this not work on? # How can this be fixed? # # Rewrite this script to process all the files in a directory #+ containing spaces in their names, and to rename them, #+ substituting an underscore for each space. Example A−4. blank−rename: renames filenames containing blanks This is an even simpler−minded version of previous script. #! /bin/bash # blank−rename.sh # # Substitutes underscores for blanks in all the filenames in a directory. ONE=1 number=0 FOUND=0 # For getting singular/plural right (see below). # Keeps track of how many files actually renamed. # Successful return value. for filename in * #Traverse all files in directory. do echo "$filename" | grep −q " " # Check whether filename if [ $? −eq $FOUND ] #+ contains space(s). then fname=$filename # Strip off path. n=`echo $fname | sed −e "s/ /_/g"` # Substitute underscore for blank. mv "$fname" "$n" # Do the actual renaming. let "number += 1" fi done if [ "$number" −eq "$ONE" ] then echo "$number file renamed." else echo "$number files renamed." fi exit 0 # For correct grammar. Appendix A. Contributed Scripts 408 Advanced Bash−Scripting Guide Example A−5. encryptedpw: Uploading to an ftp site, using a locally encrypted password #!/bin/bash # Example "ex72.sh" modified to use encrypted password. # Note that this is still rather insecure, #+ since the decrypted password is sent in the clear. # Use something like "ssh" if this is a concern. E_BADARGS=65 if [ −z "$1" ] then echo "Usage: `basename $0` filename" exit $E_BADARGS fi Username=bozo # Change to suit. pword=/home/bozo/secret/password_encrypted.file # File containing encrypted password. Filename=`basename $1` Server="XXX" Directory="YYY" # Strips pathname out of file name # Change above to actual server name & directory. Password=`cruft <$pword` # Decrypt password. # Uses the author's own "cruft" file encryption package, #+ based on the classic "onetime pad" algorithm, #+ and obtainable from: #+ Primary−site: ftp://ibiblio.org/pub/Linux/utils/file #+ cruft−0.2.tar.gz [16k] ftp −n $Server user $Username binary bell cd $Directory put $Filename bye End−Of−Session # −n option to # "bell" rings exit 0 <32000), increase MAX_ITERATIONS. h=${1:−$$} # Seed # Use $PID as seed, #+ if not specified as command−line arg. echo echo "C($h) −−− $MAX_ITERATIONS Iterations" echo for ((i=1; i<=MAX_ITERATIONS; i++)) do echo −n "$h " # ^^^^^ # tab let "remainder = h % 2" if [ "$remainder" −eq 0 ] then let "h /= 2" else let "h = h*3 + 1" fi # Even? # Divide by 2. # Multiply by 3 and add 1. COLUMNS=10 # Output 10 values per line. let "line_break = i % $COLUMNS" if [ "$line_break" −eq 0 ] then echo fi done echo # For more information on this mathematical function, #+ see "Computers, Pattern, Chaos, and Beauty", by Pickover, p. 185 ff., #+ as listed in the bibliography. exit 0 Example A−8. days−between: Calculate number of days between two dates #!/bin/bash # days−between.sh: Number of days between two dates. # Usage: ./days−between.sh [M]M/[D]D/YYYY [M]M/[D]D/YYYY # # Note: Script modified to account for changes in Bash 2.05b #+ that closed the loophole permitting large negative #+ integer return values. Appendix A. Contributed Scripts 411 Advanced Bash−Scripting Guide ARGS=2 E_PARAM_ERR=65 REFYR=1600 CENTURY=100 DIY=365 ADJ_DIY=367 MIY=12 DIM=31 LEAPCYCLE=4 MAXRETVAL=255 # Two command line parameters expected. # Param error. # Reference year. # Adjusted for leap year + fraction. # Largest permissable #+ positive return value from a function. # Declare global variable for date difference. # Declare global variable for absolute value. # Declare globals for day, month, year. diff= value= day= month= year= Param_Error () # Command line parameters wrong. { echo "Usage: `basename $0` [M]M/[D]D/YYYY [M]M/[D]D/YYYY" echo " (date must be after 1/3/1600)" exit $E_PARAM_ERR } Parse_Date () { month=${1%%/**} dm=${1%/**} day=${dm#*/} let "year = `basename $1`" } # Parse date from command line params. # Day and month. # Not a filename, but works just the same. check_date () # Checks for invalid date(s) passed. { [ "$day" −gt "$DIM" ] || [ "$month" −gt "$MIY" ] || [ "$year" −lt "$REFYR" ] && Param_Error # Exit script on bad value(s). # Uses "or−list / and−list". # # Exercise: Implement more rigorous date checking. } strip_leading_zero () # Better to strip { #+ from day and/or return ${1#0} #+ since otherwise } #+ as octal values possible leading zero(s) month Bash will interpret them (POSIX.2, sect 2.9.2.1). day_index () { day=$1 month=$2 year=$3 # Gauss' Formula: # Days from Jan. 3, 1600 to date passed as param. Appendix A. Contributed Scripts 412 Advanced Bash−Scripting Guide let "month = $month − 2" if [ "$month" −le 0 ] then let "month += 12" let "year −= 1" fi let "year −= $REFYR" let "indexyr = $year / $CENTURY" let "Days = $DIY*$year + $year/$LEAPCYCLE − $indexyr + $indexyr/$LEAPCYCLE + $ADJ_DIY*$month/$M # For an in−depth explanation of this algorithm, see #+ http://home.t−online.de/home/berndt.schwerdtfeger/cal.htm echo $Days } calculate_difference () { let "diff = $1 − $2" } # Difference between to day indices. # Global variable. abs () { if [ "$1" −lt 0 ] then let "value = 0 − $1" else let "value = $1" fi } # # # #+ #+ #+ #+ Absolute value Uses global "value" variable. If negative then change sign, else leave it alone. if [ $# −ne "$ARGS" ] then Param_Error fi Parse_Date $1 check_date $day $month $year strip_leading_zero $day day=$? strip_leading_zero $month month=$? # Require two command line params. # See if valid date. # Remove any leading zeroes #+ on day and/or month. let "date1 = `day_index $day $month $year`" Parse_Date $2 check_date $day $month $year strip_leading_zero $day day=$? strip_leading_zero $month month=$? Appendix A. Contributed Scripts 413 Advanced Bash−Scripting Guide date2=$(day_index $day $month $year) # Command substitution. calculate_difference $date1 $date2 abs $diff diff=$value echo $diff exit 0 # Compare this script with #+ the implementation of Gauss' Formula in a C program at: #+ http://buschencrew.hypermart.net/software/datedif # Make sure it's positive. Example A−9. Make a "dictionary" #!/bin/bash # makedict.sh [make dictionary] # Modification of /usr/sbin/mkdict script. # Original script copyright 1993, by Alec Muffett. # # This modified script included in this document in a manner #+ consistent with the "LICENSE" document of the "Crack" package #+ that the original script is a part of. # #+ # #+ This script processes text files to produce a sorted list of words found in the files. This may be useful for compiling dictionaries and for lexicographic research. E_BADARGS=65 if [ ! −r "$1" ] then echo "Usage: $0 files−to−process" exit $E_BADARGS fi # Need at least one #+ valid file argument. # SORT="sort" # No longer necessary to define options #+ to sort. Changed from original script. # Contents of specified files to stdout. # Convert to lowercase. # New: change spaces to newlines. # Get rid of everything non−alphanumeric #+ (original script). # Rather than deleting #+ now change non−alpha to newlines. # $SORT options unnecessary now. # Remove duplicates. # Delete lines beginning with a hashmark. # Delete blank lines. cat $* | tr A−Z a−z | tr ' ' '\012' | # tr −cd '\012[a−z][0−9]' | tr −c '\012a−z' sort uniq grep grep exit 0 | | −v '^#' | −v '^$' '\012' | Appendix A. Contributed Scripts 414 Advanced Bash−Scripting Guide Example A−10. Soundex conversion #!/bin/bash # soundex.sh: Calculate "soundex" code for names # ======================================================= # Soundex script # by # Mendel Cooper # thegrendel@theriver.com # 23 January, 2002 # # Placed in the Public Domain. # # A slightly different version of this script appeared in #+ Ed Schaefer's July, 2002 "Shell Corner" column #+ in "Unix Review" on−line, #+ http://www.unixreview.com/documents/uni1026336632258/ # ======================================================= ARGCOUNT=1 E_WRONGARGS=70 # Need name as argument. if [ $# −ne "$ARGCOUNT" ] then echo "Usage: `basename $0` name" exit $E_WRONGARGS fi assign_value () { val1=bfpv val2=cgjkqsxz val3=dt val4=l val5=mn val6=r # Assigns numerical value #+ to letters of name. # 'b,f,p,v' = 1 # 'c,g,j,k,q,s,x,z' = 2 # etc. # Exceptionally clever use of 'tr' follows. # Try to figure out what is going on here. value=$( echo "$1" \ | tr −d wh \ | tr $val1 1 | tr $val2 2 | tr $val3 3 \ | tr $val4 4 | tr $val5 5 | tr $val6 6 \ | tr −s 123456 \ | tr −d aeiouy ) # # # # # # } Assign Remove Ignore Ignore letter values. duplicate numbers, except when separated by vowels. vowels, except as separators, so delete them last. 'w' and 'h', even as separators, so delete them first. The above command substitution lays more pipe than a plumber . input_name="$1" Appendix A. Contributed Scripts 415 Advanced Bash−Scripting Guide echo echo "Name = $input_name" # Change all characters of name input to lowercase. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− name=$( echo $input_name | tr A−Z a−z ) # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Just in case argument to script is mixed case. # Prefix of soundex code: first letter of name. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− char_pos=0 # Initialize character position. prefix0=${name:$char_pos:1} prefix=`echo $prefix0 | tr a−z A−Z` # Uppercase 1st letter of soundex. let "char_pos += 1" name1=${name:$char_pos} # Bump character position to 2nd letter of name. # ++++++++++++++++++++++++++ Exception Patch +++++++++++++++++++++++++++++++++ # Now, we run both the input name and the name shifted one char to the right #+ through the value−assigning function. # If we get the same value out, that means that the first two characters #+ of the name have the same value assigned, and that one should cancel. # However, we also need to test whether the first letter of the name #+ is a vowel or 'w' or 'h', because otherwise this would bollix things up. char1=`echo $prefix | tr A−Z a−z` assign_value $name s1=$value assign_value $name1 s2=$value assign_value $char1 s3=$value s3=9$s3 # First letter of name, lowercased. # #+ #+ #+ #+ If first letter of name is a vowel or 'w' or 'h', then its "value" will be null (unset). Therefore, set it to 9, an otherwise unused value, which can be tested for. if [[ "$s1" −ne "$s2" || "$s3" −eq 9 ]] then suffix=$s2 else suffix=${s2:$char_pos} fi # ++++++++++++++++++++++ end Exception Patch +++++++++++++++++++++++++++++++++ padding=000 # Use at most 3 zeroes to pad. soun=$prefix$suffix$padding MAXLEN=4 # Pad with zeroes. # Truncate to maximum of 4 chars. Appendix A. Contributed Scripts 416 Advanced Bash−Scripting Guide soundex=${soun:0:$MAXLEN} echo "Soundex = $soundex" echo # #+ # #+ # # # # # # # # # # # # # #+ #+ The soundex code is a method of indexing and classifying names by grouping together the ones that sound alike. The soundex code for a given name is the first letter of the name, followed by a calculated three−number code. Similar sounding names should have almost the same soundex codes. Examples: Smith and Smythe both have a "S−530" soundex. Harrison = H−625 Hargison = H−622 Harriman = H−655 This works out fairly well in practice, but there are numerous anomalies. The U.S. Census and certain other governmental agencies use soundex, as do genealogical researchers. For more information, see the "National Archives and Records Administration home page", http://www.nara.gov/genealogy/soundex/soundex.html # Exercise: # −−−−−−−− # Simplify the "Exception Patch" section of this script. exit 0 Example A−11. "Game of Life" #!/bin/bash # life.sh: "Life in the Slow Lane" # ##################################################################### # # This is the Bash script version of John Conway's "Game of Life". # # "Life" is a simple implementation of cellular automata. # # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # # On a rectangular grid, let each "cell" be either "living" or "dead". # # Designate a living cell with a dot, and a dead one with a blank space.# # Begin with an arbitrarily drawn dot−and−blank grid, # #+ and let this be the starting generation, "generation 0". # # Determine each successive generation by the following rules: # # 1) Each cell has 8 neighbors, the adjoining cells # #+ left, right, top, bottom, and the 4 diagonals. # # 123 # # 4*5 # # 678 # # # # 2) A living cell with either 2 or 3 living neighbors remains alive. # # 3) A dead cell with 3 living neighbors becomes alive (a "birth"). # SURVIVE=2 # BIRTH=3 # Appendix A. Contributed Scripts 417 Advanced Bash−Scripting Guide # 4) All other cases result in dead cells. # # ##################################################################### # startfile=gen0 if [ −n "$1" ] then if [ −e "$1" ] # Check for existence. then startfile="$1" fi fi # Read the starting generation from the file "gen0". # Default, if no other file specified when invoking script. # # Specify another "generation 0" file. ALIVE1=. DEAD1=_ # Represent living and "dead" cells in the start−up file. # This script uses a 10 x 10 grid (may be increased, #+ but a large grid will will cause very slow execution). ROWS=10 COLS=10 GENERATIONS=10 # How many generations to cycle through. # Adjust this upwards, #+ if you have time on your hands. # Exit status on premature bailout, #+ if no cells left alive. NONE_ALIVE=80 TRUE=0 FALSE=1 ALIVE=0 DEAD=1 avar= generation=0 # Global; holds current generation. # Initialize generation count. # ================================================================= let "cells = $ROWS * $COLS" # How many cells. declare −a initial declare −a current display () { alive=0 # How many cells "alive". # Initially zero. # Arrays containing "cells". declare −a arr arr=( `echo "$1"` ) # Convert passed arg to array. element_count=${#arr[*]} local i local rowcheck Appendix A. Contributed Scripts 418 Advanced Bash−Scripting Guide for ((i=0; i<$element_count; i++)) do # Insert newline at end of each row. let "rowcheck = $i % ROWS" if [ "$rowcheck" −eq 0 ] then echo # Newline. echo −n " " # Indent. fi cell=${arr[i]} if [ "$cell" = . ] then let "alive += 1" fi echo −n "$cell" | sed −e 's/_/ /g' # Print out array and change underscores to spaces. done return } IsValid () { if [ −z "$1" −o −z "$2" ] then return $FALSE fi local local local local local row lower_limit=0 upper_limit left right # Test whether cell coordinate valid. # Mandatory arguments missing? # Disallow negative coordinate. let "upper_limit = $ROWS * $COLS − 1" # Total number of cells. if [ "$1" −lt "$lower_limit" −o "$1" −gt "$upper_limit" ] then return $FALSE # Out of array bounds. fi row=$2 let "left = $row * $ROWS" let "right = $left + $COLS − 1" # Left limit. # Right limit. if [ "$1" −lt "$left" −o "$1" −gt "$right" ] then return $FALSE # Beyond row boundary. fi return $TRUE } # Valid coordinate. Appendix A. Contributed Scripts 419 Advanced Bash−Scripting Guide IsAlive () { GetCount "$1" $2 local nhbd=$? # Get alive cell count in neighborhood. # Test whether cell is alive. # Takes array, cell number, state of cell as arguments. if [ "$nhbd" −eq "$BIRTH" ] then return $ALIVE fi # Alive in any case. if [ "$3" = "." −a "$nhbd" −eq "$SURVIVE" ] then # Alive only if previously alive. return $ALIVE fi return $DEAD } # Default. GetCount () # # # # Count live cells in passed cell's neighborhood. Two arguments needed: $1) variable holding array $2) cell number { local local local local local local local local local local local local local cell_number=$2 array top center bottom r row i t_top t_cen t_bot count=0 ROW_NHBD=3 array=( `echo "$1"` ) let let let let "top = $cell_number − $COLS − 1" # Set up cell neighborhood. "center = $cell_number − 1" "bottom = $cell_number + $COLS − 1" "r = $cell_number / $ROWS" # Traverse from left to right. for ((i=0; i<$ROW_NHBD; i++)) do let "t_top = $top + $i" let "t_cen = $center + $i" let "t_bot = $bottom + $i" let "row = $r" # Count center row of neighborhood. IsValid $t_cen $row # Valid cell position? if [ $? −eq "$TRUE" ] then if [ ${array[$t_cen]} = "$ALIVE1" ] # Is it alive? then # Yes? let "count += 1" # Increment count. Appendix A. Contributed Scripts 420 Advanced Bash−Scripting Guide fi fi let "row = $r − 1" # Count top row. IsValid $t_top $row if [ $? −eq "$TRUE" ] then if [ ${array[$t_top]} = "$ALIVE1" ] then let "count += 1" fi fi let "row = $r + 1" # Count bottom row. IsValid $t_bot $row if [ $? −eq "$TRUE" ] then if [ ${array[$t_bot]} = "$ALIVE1" ] then let "count += 1" fi fi done if [ ${array[$cell_number]} = "$ALIVE1" ] then let "count −= 1" # Make sure value of tested cell itself fi #+ is not counted. return $count } next_gen () { local array local i=0 array=( `echo "$1"` ) # Convert passed arg to array. # Update generation array. while [ "$i" −lt "$cells" ] do IsAlive "$1" $i ${array[$i]} if [ $? −eq "$ALIVE" ] then array[$i]=. else array[$i]="_" fi let "i += 1" done # Is cell alive? # If alive, then #+ represent the cell as a period. # Otherwise underscore #+ (which will later be converted to space). # let "generation += 1" # Increment generation count. # Set variable to pass as parameter to "display" function. avar=`echo ${array[@]}` # Convert array back to string variable. display "$avar" # Display it. Appendix A. Contributed Scripts 421 Advanced Bash−Scripting Guide echo; echo echo "Generation $generation −− $alive alive" if [ "$alive" −eq 0 ] then echo echo "Premature exit: no more cells alive!" exit $NONE_ALIVE # No point in continuing fi #+ if no live cells. } # ========================================================= # main () # Load initial array with contents of startup file. initial=( `cat "$startfile" | sed −e '/#/d' | tr −d '\n' |\ sed −e 's/\./\. /g' −e 's/_/_ /g'` ) # Delete lines containing '#' comment character. # Remove linefeeds and insert space between elements. clear echo echo echo echo echo echo # Clear screen. # Title "=======================" " $GENERATIONS generations" " of" "\"Life in the Slow Lane\"" "=======================" # −−−−−−−− Display first generation. −−−−−−−− Gen0=`echo ${initial[@]}` display "$Gen0" # Display only. echo; echo echo "Generation $generation −− $alive alive" # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− let "generation += 1" echo # Increment generation count. # −−−−−−− Display second generation. −−−−−−− Cur=`echo ${initial[@]}` next_gen "$Cur" # Update & display. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− let "generation += 1" # Increment generation count. # −−−−−− Main loop for displaying subsequent generations −−−−−− while [ "$generation" −le "$GENERATIONS" ] do Cur="$avar" next_gen "$Cur" let "generation += 1" done # ============================================================== echo Appendix A. Contributed Scripts 422 Advanced Bash−Scripting Guide exit 0 # # # # # # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− The grid in this script has a "boundary problem". The the top, bottom, and sides border on a void of dead cells. Exercise: Change the script to have the grid wrap around, + so that the left and right sides will "touch", + as will the top and bottom. Example A−12. Data file for "Game of Life" # This is an example "generation 0" start−up file for "life.sh". # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # The "gen0" file is a 10 x 10 grid using a period (.) for live cells, #+ and an underscore (_) for dead ones. We cannot simply use spaces #+ for dead cells in this file because of a peculiarity in Bash arrays. # [Exercise for the reader: explain this.] # # Lines beginning with a '#' are comments, and the script ignores them. __.__..___ ___._.____ ____.___.. _._______. ____._____ ..__...___ ____._____ ___...____ __.._..___ _..___..__ +++ The following two scripts are by Mark Moraes of the University of Toronto. See the enclosed file "Moraes−COPYRIGHT" for permissions and restrictions. Example A−13. behead: Removing mail and news message headers #! /bin/sh # Strips off the header from a mail/News message i.e. till the first # empty line # Mark Moraes, University of Toronto # ==> These comments added by author of this document. if [ $# −eq 0 ]; then # ==> If no command line args present, then works on file redirected to stdin. sed −e '1,/^$/d' −e '/^[ ]*$/d' # −−> Delete empty lines and all lines until # −−> first one beginning with white space. else # ==> If command line args present, then work on files named. for i do sed −e '1,/^$/d' −e '/^[ ]*$/d' $i # −−> Ditto, as above. done fi Appendix A. Contributed Scripts 423 Advanced Bash−Scripting Guide # # # # ==> Exercise: Add error checking and other options. ==> ==> Note that the small sed script repeats, except for the arg passed. ==> Does it make sense to embed it in a function? Why or why not? Example A−14. ftpget: Downloading files via ftp #! /bin/sh # $Id: ftpget,v 1.2 91/05/07 21:15:43 moraes Exp $ # Script to perform batch anonymous ftp. Essentially converts a list of # of command line arguments into input to ftp. # Simple, and quick − written as a companion to ftplist # −h specifies the remote host (default prep.ai.mit.edu) # −d specifies the remote directory to cd to − you can provide a sequence # of −d options − they will be cd'ed to in turn. If the paths are relative, # make sure you get the sequence right. Be careful with relative paths − # there are far too many symlinks nowadays. # (default is the ftp login directory) # −v turns on the verbose option of ftp, and shows all responses from the # ftp server. # −f remotefile[:localfile] gets the remote file into localfile # −m pattern does an mget with the specified pattern. Remember to quote # shell characters. # −c does a local cd to the specified directory # For example, # ftpget −h expo.lcs.mit.edu −d contrib −f xplaces.shar:xplaces.sh \ # −d ../pub/R3/fixes −c ~/fixes −m 'fix*' # will get xplaces.shar from ~ftp/contrib on expo.lcs.mit.edu, and put it in # xplaces.sh in the current working directory, and get all fixes from # ~ftp/pub/R3/fixes and put them in the ~/fixes directory. # Obviously, the sequence of the options is important, since the equivalent # commands are executed by ftp in corresponding order # # Mark Moraes (moraes@csri.toronto.edu), Feb 1, 1989 # ==> Angle brackets changed to parens, so Docbook won't get indigestion. # # ==> These comments added by author of this document. # PATH=/local/bin:/usr/ucb:/usr/bin:/bin # export PATH # ==> Above 2 lines from original script probably superfluous. TMPFILE=/tmp/ftp.$$ # ==> Creates temp file, using process id of script ($$) # ==> to construct filename. SITE=`domainname`.toronto.edu # ==> 'domainname' similar to 'hostname' # ==> May rewrite this to parameterize this for general use. usage="Usage: $0 [−h remotehost] [−d remotedirectory]... [−f remfile:localfile]... \ [−c localdirectory] [−m filepattern] [−v]" ftpflags="−i −n" verbflag= set −f # So we can use globbing in −m set x `getopt vh:d:c:m:f: $*` if [ $? != 0 ]; then echo $usage Appendix A. Contributed Scripts 424 Advanced Bash−Scripting Guide exit 65 fi shift trap 'rm −f ${TMPFILE} ; exit' 0 1 2 3 15 echo "user anonymous ${USER−gnu}@${SITE} > ${TMPFILE}" # ==> Added quotes (recommended in complex echoes). echo binary >> ${TMPFILE} for i in $* # ==> Parse command line args. do case $i in −v) verbflag=−v; echo hash >> ${TMPFILE}; shift;; −h) remhost=$2; shift 2;; −d) echo cd $2 >> ${TMPFILE}; if [ x${verbflag} != x ]; then echo pwd >> ${TMPFILE}; fi; shift 2;; −c) echo lcd $2 >> ${TMPFILE}; shift 2;; −m) echo mget "$2" >> ${TMPFILE}; shift 2;; −f) f1=`expr "$2" : "\([^:]*\).*"`; f2=`expr "$2" : "[^:]*:\(.*\)"`; echo get ${f1} ${f2} >> ${TMPFILE}; shift 2;; −−) shift; break;; esac done if [ $# −ne 0 ]; then echo $usage exit 65 # ==> Changed from "exit 2" to conform with standard. fi if [ x${verbflag} != x ]; then ftpflags="${ftpflags} −v" fi if [ x${remhost} = x ]; then remhost=prep.ai.mit.edu # ==> Rewrite to match your favorite ftp site. fi echo quit >> ${TMPFILE} # ==> All commands saved in tempfile. ftp ${ftpflags} ${remhost} < ${TMPFILE} # ==> Now, tempfile batch processed by ftp. rm −f ${TMPFILE} # ==> Finally, tempfile deleted (you may wish to copy it to a logfile). # # # # ==> ==> ==> ==> Exercises: −−−−−−−−− 1) Add error checking. 2) Add bells & whistles. + Antek Sawicki contributed the following script, which makes very clever use of the parameter substitution operators discussed in Section 9.3. Example A−15. password: Generating random 8−character passwords #!/bin/bash # May need to be invoked with #!/bin/bash2 on older machines. Appendix A. Contributed Scripts 425 Advanced Bash−Scripting Guide # # Random password generator for bash 2.x by Antek Sawicki , # who generously gave permission to the document author to use it here. # # ==> Comments added by document author ==> MATRIX="0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" LENGTH="8" # ==> May change 'LENGTH' for longer password, of course. while [ "${n:=1}" −le "$LENGTH" ] # ==> Recall that := is "default substitution" operator. # ==> So, if 'n' has not been initialized, set it to 1. do PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}" # ==> Very clever, but tricky. # ==> Starting from the innermost nesting... # ==> ${#MATRIX} returns length of array MATRIX. # ==> $RANDOM%${#MATRIX} returns random number between 1 # ==> and length of MATRIX − 1. # # # # ==> ==> ==> ==> ${MATRIX:$(($RANDOM%${#MATRIX})):1} returns expansion of MATRIX at random position, by length 1. See {var:pos:len} parameter substitution in Section 3.3.1 and following examples. # ==> PASS=... simply pastes this result onto previous PASS (concatenation). # # # # ==> To visualize this more clearly, uncomment the following line ==> echo "$PASS" ==> to see PASS being built up, ==> one character at a time, each iteration of the loop. let n+=1 # ==> Increment 'n' for next pass. done echo "$PASS" exit 0 # ==> Or, redirect to file, as desired. + James R. Van Zandt contributed this script, which uses named pipes and, in his words, "really exercises quoting and escaping". Example A−16. fifo: Making daily backups, using named pipes #!/bin/bash # ==> Script by James R. Van Zandt, and used here with his permission. # ==> Comments added by author of this document. HERE=`uname −n` # ==> hostname Appendix A. Contributed Scripts 426 Advanced Bash−Scripting Guide THERE=bilbo echo "starting remote backup to $THERE at `date +%r`" # ==> `date +%r` returns time in 12−hour format, i.e. "08:08:34 PM". # make sure /pipe really is a pipe and not a plain file rm −rf /pipe mkfifo /pipe # ==> Create a "named pipe", named "/pipe". # ==> 'su xyz' runs commands as user "xyz". # ==> 'ssh' invokes secure shell (remote login client). su xyz −c "ssh $THERE \"cat >/home/xyz/backup/${HERE}−daily.tar.gz\" < /pipe"& cd / tar −czf − bin boot dev etc home info lib man root sbin share usr var >/pipe # ==> Uses named pipe, /pipe, to communicate between processes: # ==> 'tar/gzip' writes to /pipe and 'ssh' reads from /pipe. # ==> The end result is this backs up the main directories, from / on down. # ==> What are the advantages of a "named pipe" in this situation, # ==> as opposed to an "anonymous pipe", with |? # ==> Will an anonymous pipe even work here? exit 0 + Stephane Chazelas contributed the following script to demonstrate that generating prime numbers does not require arrays. Example A−17. Generating prime numbers using the modulo operator #!/bin/bash # primes.sh: Generate prime numbers, without using arrays. # Script contributed by Stephane Chazelas. # This does *not* use the classic "Sieve of Eratosthenes" algorithm, #+ but instead uses the more intuitive method of testing each candidate number #+ for factors (divisors), using the "%" modulo operator. LIMIT=1000 Primes() { (( n = $1 + 1 )) shift # echo "_n=$n i=$i_" if (( n == LIMIT )) then echo $* return fi for i; do # echo "−n=$n i=$i−" (( i * i > n )) && break (( n % i )) && continue Primes $n $@ # Primes 2 − 1000 # Bump to next integer. # Next parameter in list. # "i" gets set to "@", previous values of $n. # Optimization. # Sift out non−primes using modulo operator. # Recursion inside loop. Appendix A. Contributed Scripts 427 Advanced Bash−Scripting Guide return done Primes $n $@ $n # Recursion outside loop. # Successively accumulate positional parameters. # "$@" is the accumulating list of primes. } Primes 1 exit 0 # Uncomment lines 16 and 24 to help figure out what is going on. # Compare the speed of this algorithm for generating primes #+ with the Sieve of Eratosthenes (ex68.sh). # Exercise: Rewrite this script without recursion, for faster execution. + Jordi Sanfeliu gave permission to use his elegant tree script. Example A−18. tree: Displaying a directory tree #!/bin/sh # # # # # # # # # # @(#) tree 1.1 30/11/95 by Jordi Sanfeliu email: mikaku@fiwix.org Initial version: Next version : Patch by : 1.0 30/11/95 1.1 24/02/97 Now, with symbolic links Ian Kjos, to support unsearchable dirs email: beth13@mail.utexas.edu Tree is a tool for view the directory tree (obvious :−) ) # ==> 'Tree' script used here with the permission of its author, Jordi Sanfeliu. # ==> Comments added by the author of this document. # ==> Argument quoting added. search () { for dir in `echo *` # ==> `echo *` lists all the files in current working directory, without line breaks. # ==> Similar effect to for dir in * # ==> but "dir in `echo *`" will not handle filenames with blanks. do if [ −d "$dir" ] ; then # ==> If it is a directory (−d)... zz=0 # ==> Temp variable, keeping track of directory level. while [ $zz != $deep ] # Keep track of inner nested loop. do echo −n "| " # ==> Display vertical connector symbol, # ==> with 2 spaces & no line feed in order to indent. zz=`expr $zz + 1` # ==> Increment zz. done if [ −L "$dir" ] ; then # ==> If directory is a symbolic link... echo "+−−−$dir" `ls −l $dir | sed 's/^.*'$dir' //'` # ==> Display horiz. connector and list directory name, but... Appendix A. Contributed Scripts 428 Advanced Bash−Scripting Guide # ==> delete date/time part of long listing. else echo "+−−−$dir" # ==> Display horizontal connector symbol... # ==> and print directory name. if cd "$dir" ; then # ==> If can move to subdirectory... deep=`expr $deep + 1` # ==> Increment depth. search # with recursivity ;−) # ==> Function calls itself. numdirs=`expr $numdirs + 1` # ==> Increment directory count. fi fi fi done cd .. # ==> Up one directory level. if [ "$deep" ] ; then # ==> If depth = 0 (returns TRUE)... swfi=1 # ==> set flag showing that search is done. fi deep=`expr $deep − 1` # ==> Decrement depth. } # − Main − if [ $# = 0 ] cd `pwd` else cd $1 fi echo "Initial swfi=0 # deep=0 # numdirs=0 zz=0 ; then # ==> No args to script, then use current working directory. # ==> Otherwise, move to indicated directory. directory = `pwd`" ==> Search finished flag. ==> Depth of listing. while [ "$swfi" != 1 ] # While flag not set... do search # ==> Call function after initializing variables. done echo "Total directories = $numdirs" exit 0 # ==> Challenge: try to figure out exactly how this script works. Noah Friedman gave permission to use his string function script, which essentially reproduces some of the C−library string manipulation functions. Example A−19. string functions: C−like string functions #!/bin/bash # # # # # # string.bash −−− bash emulation of string(3) library routines Author: Noah Friedman ==> Used with his kind permission in this document. Created: 1992−07−01 Last modified: 1993−09−29 Public domain # Conversion to bash v2 syntax done by Chet Ramey # Commentary: # Code: Appendix A. Contributed Scripts 429 Advanced Bash−Scripting Guide #:docstring strcat: # Usage: strcat s1 s2 # # Strcat appends the value of variable s2 to variable s1. # # Example: # a="foo" # b="bar" # strcat a b # echo $a # => foobar # #:end docstring: ###;;;autoload ==> Autoloading of function commented out. function strcat () { local s1_val s2_val s1_val=${!1} # indirect variable expansion s2_val=${!2} eval "$1"=\'"${s1_val}${s2_val}"\' # ==> eval $1='${s1_val}${s2_val}' avoids problems, # ==> if one of the variables contains a single quote. } #:docstring strncat: # Usage: strncat s1 s2 $n # # Line strcat, but strncat appends a maximum of n characters from the value # of variable s2. It copies fewer if the value of variabl s2 is shorter # than n characters. Echoes result on stdout. # # Example: # a=foo # b=barbaz # strncat a b 3 # echo $a # => foobar # #:end docstring: ###;;;autoload function strncat () { local s1="$1" local s2="$2" local −i n="$3" local s1_val s2_val s1_val=${!s1} s2_val=${!s2} if [ ${#s2_val} −gt ${n} ]; then s2_val=${s2_val:0:$n} fi # ==> indirect variable expansion # ==> substring extraction eval "$s1"=\'"${s1_val}${s2_val}"\' # ==> eval $1='${s1_val}${s2_val}' avoids problems, # ==> if one of the variables contains a single quote. } Appendix A. Contributed Scripts 430 Advanced Bash−Scripting Guide #:docstring strcmp: # Usage: strcmp $s1 $s2 # # Strcmp compares its arguments and returns an integer less than, equal to, # or greater than zero, depending on whether string s1 is lexicographically # less than, equal to, or greater than string s2. #:end docstring: ###;;;autoload function strcmp () { [ "$1" = "$2" ] && return 0 [ "${1}" '<' "${2}" ] > /dev/null && return −1 return 1 } #:docstring strncmp: # Usage: strncmp $s1 $s2 $n # # Like strcmp, but makes the comparison by examining a maximum of n # characters (n less than or equal to zero yields equality). #:end docstring: ###;;;autoload function strncmp () { if [ −z "${3}" −o "${3}" −le "0" ]; then return 0 fi if [ ${3} −ge ${#1} −a ${3} −ge ${#2} ]; then strcmp "$1" "$2" return $? else s1=${1:0:$3} s2=${2:0:$3} strcmp $s1 $s2 return $? fi } #:docstring strlen: # Usage: strlen s # # Strlen returns the number of characters in string literal s. #:end docstring: ###;;;autoload function strlen () { eval echo "\${#${1}}" # ==> Returns the length of the value of the variable # ==> whose name is passed as an argument. } #:docstring strspn: # Usage: strspn $s1 $s2 # # Strspn returns the length of the maximum initial segment of string s1, Appendix A. Contributed Scripts 431 Advanced Bash−Scripting Guide # which consists entirely of characters from string s2. #:end docstring: ###;;;autoload function strspn () { # Unsetting IFS allows whitespace to be handled as normal chars. local IFS= local result="${1%%[!${2}]*}" echo ${#result} } #:docstring strcspn: # Usage: strcspn $s1 $s2 # # Strcspn returns the length of the maximum initial segment of string s1, # which consists entirely of characters not from string s2. #:end docstring: ###;;;autoload function strcspn () { # Unsetting IFS allows whitspace to be handled as normal chars. local IFS= local result="${1%%[${2}]*}" echo ${#result} } #:docstring strstr: # Usage: strstr s1 s2 # # Strstr echoes a substring starting at the first occurrence of string s2 in # string s1, or nothing if s2 does not occur in the string. If s2 points to # a string of zero length, strstr echoes s1. #:end docstring: ###;;;autoload function strstr () { # if s2 points to a string of zero length, strstr echoes s1 [ ${#2} −eq 0 ] && { echo "$1" ; return 0; } # strstr echoes nothing if s2 does not occur in s1 case "$1" in *$2*) ;; *) return 1;; esac # use the pattern matching code to strip off the match and everything # following it first=${1/$2*/} # then strip off the first unmatched portion of the string echo "${1##$first}" } #:docstring strtok: # Usage: strtok s1 s2 # # Strtok considers the string s1 to consist of a sequence of zero or more Appendix A. Contributed Scripts 432 Advanced Bash−Scripting Guide # text tokens separated by spans of one or more characters from the # separator string s2. The first call (with a non−empty string s1 # specified) echoes a string consisting of the first token on stdout. The # function keeps track of its position in the string s1 between separate # calls, so that subsequent calls made with the first argument an empty # string will work through the string immediately following that token. In # this way subsequent calls will work through the string s1 until no tokens # remain. The separator string s2 may be different from call to call. # When no token remains in s1, an empty value is echoed on stdout. #:end docstring: ###;;;autoload function strtok () { : } #:docstring strtrunc: # Usage: strtrunc $n $s1 {$s2} {$...} # # Used by many functions like strncmp to truncate arguments for comparison. # Echoes the first n characters of each string s1 s2 ... on stdout. #:end docstring: ###;;;autoload function strtrunc () { n=$1 ; shift for z; do echo "${z:0:$n}" done } # provide string # string.bash ends here # ========================================================================== # # ==> Everything below here added by the document author. # ==> Suggested use of this script is to delete everything below here, # ==> and "source" this file into your own scripts. # strcat string0=one string1=two echo echo "Testing \"strcat\" function:" echo "Original \"string0\" = $string0" echo "\"string1\" = $string1" strcat string0 string1 echo "New \"string0\" = $string0" echo # strlen echo echo "Testing \"strlen\" function:" str=123456789 echo "\"str\" = $str" echo −n "Length of \"str\" = " strlen str Appendix A. Contributed Scripts 433 Advanced Bash−Scripting Guide echo # Exercise: # −−−−−−−− # Add code to test all the other string functions above. exit 0 Michael Zick's complex array example uses the md5sum check sum command to encode directory information. Example A−20. Directory information #! /bin/bash # directory−info.sh # Parses and lists directory information. # NOTE: Change lines 273 and 353 per "README" file. # Michael Zick is the author of this script. # Used here with his permission. # # # # # # # # Controls If overridden by command arguments, they must be in the order: Arg1: "Descriptor Directory" Arg2: "Exclude Paths" Arg3: "Exclude Directories" Environment Settings override Defaults. Command arguments override Environment Settings. # Default location for content addressed file descriptors. MD5UCFS=${1:−${MD5UCFS:−'/tmpfs/ucfs'}} # Directory paths never to list or enter declare −a \ EXCLUDE_PATHS=${2:−${EXCLUDE_PATHS:−'(/proc /dev /devfs /tmpfs)'}} # Directories never to list or enter declare −a \ EXCLUDE_DIRS=${3:−${EXCLUDE_DIRS:−'(ucfs lost+found tmp wtmp)'}} # Files never to list or enter declare −a \ EXCLUDE_FILES=${3:−${EXCLUDE_FILES:−'(core "Name with Spaces")'}} # : # # # # # # # Here document used as a comment block. << LSfieldsDoc # # # # List Filesystem Directory Information # # # # # ListDirectory "FileGlob" "Field−Array−Name" or ListDirectory −of "FileGlob" "Field−Array−Filename" '−of' meaning 'output to filename' #### Appendix A. Contributed Scripts 434 Advanced Bash−Scripting Guide String format description based on: ls (GNU fileutils) version 4.0.36 Produces a line (or more) formatted: inode permissions hard−links owner group ... 32736 −rw−−−−−−− 1 mszick mszick size day month date hh:mm:ss year path 2756608 Sun Apr 20 08:53:06 2003 /home/mszick/core Unless it is formatted: inode permissions hard−links owner group ... 266705 crw−rw−−−− 1 root uucp major minor day month date hh:mm:ss year path 4, 68 Sun Apr 20 09:27:33 2003 /dev/ttyS4 NOTE: that pesky comma after the major number NOTE: the 'path' may be multiple fields: /home/mszick/core /proc/982/fd/0 −> /dev/null /proc/982/fd/1 −> /home/mszick/.xsession−errors /proc/982/fd/13 −> /tmp/tmpfZVVOCs (deleted) /proc/982/fd/7 −> /tmp/kde−mszick/ksycoca /proc/982/fd/8 −> socket:[11586] /proc/982/fd/9 −> pipe:[11588] If that isn't enough to keep your parser guessing, either or both of the path components may be relative: ../Built−Shared −> Built−Static ../linux−2.4.20.tar.bz2 −> ../../../SRCS/linux−2.4.20.tar.bz2 The first character of the 11 (10?) character permissions field: 's' Socket 'd' Directory 'b' Block device 'c' Character device 'l' Symbolic link NOTE: Hard links not marked − test for identical inode numbers on identical filesystems. All information about hard linked files are shared, except for the names and the name's location in the directory system. NOTE: A "Hard link" is known as a "File Alias" on some systems. '−' An undistingushed file Followed by three groups of letters for: User, Group, Others Character 1: '−' Not readable; 'r' Readable Character 2: '−' Not writable; 'w' Writable Character 3, User and Group: Combined execute and special '−' Not Executable, Not Special 'x' Executable, Not Special 's' Executable, Special 'S' Not Executable, Special Character 3, Others: Combined execute and sticky (tacky?) '−' Not Executable, Not Tacky 'x' Executable, Not Tacky 't' Executable, Tacky 'T' Not Executable, Tacky Followed by an access indicator Haven't tested this one, it may be the eleventh character or it may generate another field Appendix A. Contributed Scripts 435 Advanced Bash−Scripting Guide ' ' No alternate access '+' Alternate access LSfieldsDoc ListDirectory() { local −a T local −i of=0 # OLD_IFS=$IFS # Default return in variable # Using BASH default ' \t\n' case "$#" in 3) case "$1" in −of) of=1 ; shift ;; *) return 1 ;; esac ;; 2) : ;; # Poor man's "continue" *) return 1 ;; esac # NOTE: the (ls) command is NOT quoted (") T=( $(ls −−inode −−ignore−backups −−almost−all −−directory \ −−full−time −−color=none −−time=status −−sort=none \ −−format=long $1) ) case $of in # Assign T back to the array whose name was passed as $2 0) eval $2=\( \"\$\{T\[@\]\}\" \) ;; # Write T into filename passed as $2 1) echo "${T[@]}" > "$2" ;; esac return 0 } # # # # # Is that string a legal number? # # # # # # # IsNumber "Var" # # # # # There has to be a better way, sigh... IsNumber() { local −i int if [ $# −eq 0 ] then return 1 else (let int=$1) return $? fi } 2>/dev/null # Exit status of the let thread # # # # # Index Filesystem Directory Information # # # # # # # IndexList "Field−Array−Name" "Index−Array−Name" # or # IndexList −if Field−Array−Filename Index−Array−Name # IndexList −of Field−Array−Name Index−Array−Filename # IndexList −if −of Field−Array−Filename Index−Array−Filename ##### : << IndexListDoc Walk an array of directory fields produced by ListDirectory Appendix A. Contributed Scripts 436 Advanced Bash−Scripting Guide Having suppressed the line breaks in an otherwise line oriented report, build an index to the array element which starts each line. Each line gets two index entries, the first element of each line (inode) and the element that holds the pathname of the file. The first index entry pair (Line−Number==0) are informational: Index−Array−Name[0] : Number of "Lines" indexed Index−Array−Name[1] : "Current Line" pointer into Index−Array−Name The following index pairs (if any) hold element indexes into the Field−Array−Name per: Index−Array−Name[Line−Number * 2] : The "inode" field element. NOTE: This distance may be either +11 or +12 elements. Index−Array−Name[(Line−Number * 2) + 1] : The "pathname" element. NOTE: This distance may be a variable number of elements. Next line index pair for Line−Number+1. IndexListDoc IndexList() { local local local local −a −a −i −i LIST −i INDEX=( 0 0 ) Lidx Lcnt if=0 of=0 # Local of listname passed # Local of index to return # Default to variable names case "$#" in # Simplistic option testing 0) return 1 ;; 1) return 1 ;; 2) : ;; # Poor man's continue 3) case "$1" in −if) if=1 ;; −of) of=1 ;; * ) return 1 ;; esac ; shift ;; 4) if=1 ; of=1 ; shift ; shift ;; *) return 1 esac # Make local copy of list case "$if" in 0) eval LIST=\( \"\$\{$1\[@\]\}\" \) ;; 1) LIST=( $(cat $1) ) ;; esac # Grok (grope?) the array Lcnt=${#LIST[@]} Lidx=0 until (( Lidx >= Lcnt )) do if IsNumber ${LIST[$Lidx]} then local −i inode name local ft inode=Lidx local m=${LIST[$Lidx+2]} ft=${LIST[$Lidx+1]:0:1} case $ft in b) ((Lidx+=12)) ;; # Hard Links field # Fast−Stat # Block device Appendix A. Contributed Scripts 437 Advanced Bash−Scripting Guide c) ((Lidx+=12)) ;; # Character device *) ((Lidx+=11)) ;; # Anything else esac name=Lidx case $ft in −) ((Lidx+=1)) ;; # The easy one b) ((Lidx+=1)) ;; # Block device c) ((Lidx+=1)) ;; # Character device d) ((Lidx+=1)) ;; # The other easy one l) ((Lidx+=3)) ;; # At LEAST two more fields # A little more elegance here would handle pipes, #+ sockets, deleted files − later. *) until IsNumber ${LIST[$Lidx]} || ((Lidx >= Lcnt)) do ((Lidx+=1)) done ;; # Not required esac INDEX[${#INDEX[*]}]=$inode INDEX[${#INDEX[*]}]=$name INDEX[0]=${INDEX[0]}+1 # One more "line" found # echo "Line: ${INDEX[0]} Type: $ft Links: $m Inode: \ # ${LIST[$inode]} Name: ${LIST[$name]}" else ((Lidx+=1)) fi done case "$of" in 0) eval $2=\( \"\$\{INDEX\[@\]\}\" \) ;; 1) echo "${INDEX[@]}" > "$2" ;; esac return 0 # What could go wrong? } # # # # # Content Identify File # # # # # # # DigestFile Input−Array−Name Digest−Array−Name # or # DigestFile −if Input−FileName Digest−Array−Name ##### # Here document used as a comment block. : < realname stat −t linkname returns the linkname (link) information stat −lt linkname returns the realname information stat −tf and stat −ltf fields [0] name [1] ID−0? # Maybe someday, but Linux stat structure [2] ID−0? # does not have either LABEL nor UUID # fields, currently information must come # from file−system specific utilities These will be munged into: [1] UUID if possible [2] Volume Label if possible Note: 'mount −l' does return the label and could return the UUID [3] [4] [5] Maximum length of filenames Filesystem type Total blocks in the filesystem Appendix A. Contributed Scripts 440 Advanced Bash−Scripting Guide [6] [7] [8] [9] [10] Free blocks Free blocks for non−root user(s) Block size of the filesystem Total inodes Free inodes −*−*− Per: Return code: 0 Size of array: 11 Contents of array Element 0: /home/mszick Element 1: 0 Element 2: 0 Element 3: 255 Element 4: ef53 Element 5: 2581445 Element 6: 2277180 Element 7: 2146050 Element 8: 4096 Element 9: 1311552 Element 10: 1276425 StatFieldsDoc # # LocateFile [−l] FileName Location−Array−Name LocateFile [−l] −of FileName Location−Array−FileName LocateFile() { local −a LOC LOC1 LOC2 local lk="" of=0 case "$#" in 0) return 1 ;; 1) return 1 ;; 2) : ;; *) while (( "$#" > 2 )) do case "$1" in −l) lk=−1 ;; −of) of=1 ;; *) return 1 ;; esac shift done ;; esac # More Sanscrit−2.0.5 # LOC1=( $(stat −t $lk $1) ) # LOC2=( $(stat −tf $lk $1) ) # Uncomment above two lines if system has "stat" command installed. LOC=( ${LOC1[@]:0:1} ${LOC1[@]:3:11} ${LOC2[@]:1:2} ${LOC2[@]:4:1} ) case "$of" in 0) eval $2=\( \"\$\{LOC\[@\]\}\" \) ;; 1) echo "${LOC[@]}" > "$2" ;; esac return 0 # Which yields (if you are lucky, and have "stat" installed) # −*−*− Location Discriptor −*−*− Appendix A. Contributed Scripts 441 Advanced Bash−Scripting Guide # # # # # # # # # # # # # # # # # # } Return code: 0 Size of array: 15 Contents of array Element 0: /home/mszick Element 1: 41e8 Element 2: 500 Element 3: 500 Element 4: 303 Element 5: 32385 Element 6: 22 Element 7: 0 Element 8: 0 Element 9: 1051224608 Element 10: 1051214068 Element 11: 1051214068 Element 12: 0 Element 13: 0 Element 14: ef53 20th Century name Type and Permissions User Group Device inode Link count Device Major Device Minor Last Access Last Modify Last Status UUID (to be) Volume Label (to be) Filesystem type # And then there was some test code ListArray() # ListArray Name { local −a Ta eval Ta=\( \"\$\{$1\[@\]\}\" \) echo echo "−*−*− List of Array −*−*−" echo "Size of array $1: ${#Ta[*]}" echo "Contents of array $1:" for (( i=0 ; i<${#Ta[*]} ; i++ )) do echo −e "\tElement $i: ${Ta[$i]}" done return 0 } declare −a CUR_DIR # For small arrays ListDirectory "${PWD}" CUR_DIR ListArray CUR_DIR declare −a DIR_DIG DigestFile CUR_DIR DIR_DIG echo "The new \"name\" (checksum) for ${CUR_DIR[9]} is ${DIR_DIG[0]}" declare −a DIR_ENT # BIG_DIR # For really big arrays − use a temporary file in ramdisk # BIG−DIR # ListDirectory −of "${CUR_DIR[11]}/*" "/tmpfs/junk2" ListDirectory "${CUR_DIR[11]}/*" DIR_ENT declare −a DIR_IDX # BIG−DIR # IndexList −if "/tmpfs/junk2" DIR_IDX IndexList DIR_ENT DIR_IDX declare −a IDX_DIG # BIG−DIR # DIR_ENT=( $(cat /tmpfs/junk2) ) # BIG−DIR # DigestFile −if /tmpfs/junk2 IDX_DIG DigestFile DIR_ENT IDX_DIG Appendix A. Contributed Scripts 442 Advanced Bash−Scripting Guide # Small (should) be able to parallize IndexList & DigestFile # Large (should) be able to parallize IndexList & DigestFile & the assignment echo "The \"name\" (checksum) for the contents of ${PWD} is ${IDX_DIG[0]}" declare −a FILE_LOC LocateFile ${PWD} FILE_LOC ListArray FILE_LOC exit 0 Stephane Chazelas demonstrates object−oriented programming in a Bash script. Example A−21. Object−oriented database #!/bin/bash # obj−oriented.sh: Object−oriented programming in a shell script. # Script by Stephane Chazelas. person.new() # Looks almost like a class declaration in C++. { local obj_name=$1 name=$2 firstname=$3 birthdate=$4 eval "$obj_name.set_name() { eval \"$obj_name.get_name() { echo \$1 }\" }" eval "$obj_name.set_firstname() { eval \"$obj_name.get_firstname() { echo \$1 }\" }" eval "$obj_name.set_birthdate() { eval \"$obj_name.get_birthdate() { echo \$1 }\" eval \"$obj_name.show_birthdate() { echo \$(date −d \"1/1/1970 0:0:\$1 GMT\") }\" eval \"$obj_name.get_age() { echo \$(( (\$(date +%s) − \$1) / 3600 / 24 / 365 )) }\" }" $obj_name.set_name $name $obj_name.set_firstname $firstname $obj_name.set_birthdate $birthdate } echo person.new self Bozeman Bozo 101272413 # Create an instance of "person.new" (actually passing args to the function). self.get_firstname self.get_name # # Bozo Bozeman Appendix A. Contributed Scripts 443 Advanced Bash−Scripting Guide self.get_age self.get_birthdate self.show_birthdate echo # typeset −f # to see the created functions (careful, it scrolls off the page). exit 0 # # # 28 101272413 Sat Mar 17 20:13:33 MST 1973 Now for a script that does something useful: installing and mounting those cute USB keychain solid−state "hard drives." Example A−22. Mounting USB keychain storage devices #!/bin/bash # ==> usb.sh # ==> Script for mounting and installing pen/keychain USB storage devices. # ==> Runs as root at system startup (see below). # This code is free software covered by GNU GPL license version 2 or above. # Please refer to http://www.gnu.org/ for the full license text. # # Some code lifted from usb−mount by Michael Hamilton's usb−mount (LGPL) #+ see http://users.actrix.co.nz/michael/usbmount.html # # INSTALL # −−−−−−− # Put this in /etc/hotplug/usb/diskonkey. # Then look in /etc/hotplug/usb.distmap, and copy all usb−storage entries #+ into /etc/hotplug/usb.usermap, substituting "usb−storage" for "diskonkey". # Otherwise this code is only run during the kernel module invocation/removal #+ (at least in my tests), which defeats the purpose. # # TODO # −−−− # Handle more than one diskonkey device at one time (e.g. /dev/diskonkey1 #+ and /mnt/diskonkey1), etc. The biggest problem here is the handling in #+ devlabel, which I haven't yet tried. # # AUTHOR and SUPPORT # −−−−−−−−−−−−−−−−−− # Konstantin Riabitsev, . # Send any problem reports to my email address at the moment. # # ==> Comments added by ABS Guide author. SYMLINKDEV=/dev/diskonkey MOUNTPOINT=/mnt/diskonkey DEVLABEL=/sbin/devlabel DEVLABELCONFIG=/etc/sysconfig/devlabel IAM=$0 ## # Functions lifted near−verbatim from usb−mount code. # Appendix A. Contributed Scripts 444 Advanced Bash−Scripting Guide function find } function echo 1) }' } allAttachedScsiUsb { /proc/scsi/ −path '/proc/scsi/usb−storage*' −type f | xargs grep −l 'Attached: Yes' scsiDevFromScsiUsb { $1 | awk −F"[−/]" '{ n=$(NF−1); print "/dev/sd" substr("abcdefghijklmnopqrstuvwxyz", n+ if [ "${ACTION}" = "add" ] && [ −f "${DEVICE}" ]; then ## # lifted from usbcam code. # if [ −f /var/run/console.lock ]; then CONSOLEOWNER=`cat /var/run/console.lock` elif [ −f /var/lock/console.lock ]; then CONSOLEOWNER=`cat /var/lock/console.lock` else CONSOLEOWNER= fi for procEntry in $(allAttachedScsiUsb); do scsiDev=$(scsiDevFromScsiUsb $procEntry) # Some bug with usb−storage? # Partitions are not in /proc/partitions until they are accessed #+ somehow. /sbin/fdisk −l $scsiDev >/dev/null ## # Most devices have partitioning info, so the data would be on #+ /dev/sd?1. However, some stupider ones don't have any partitioning #+ and use the entire device for data storage. This tries to #+ guess semi−intelligently if we have a /dev/sd?1 and if not, then #+ it uses the entire device and hopes for the better. # if grep −q `basename $scsiDev`1 /proc/partitions; then part="$scsiDev""1" else part=$scsiDev fi ## # Change ownership of the partition to the console user so they can #+ mount it. # if [ ! −z "$CONSOLEOWNER" ]; then chown $CONSOLEOWNER:disk $part fi ## # This checks if we already have this UUID defined with devlabel. # If not, it then adds the device to the list. # prodid=`$DEVLABEL printid −d $part` if ! grep −q $prodid $DEVLABELCONFIG; then # cross our fingers and hope it works $DEVLABEL add −d $part −s $SYMLINKDEV 2>/dev/null fi ## # Check if the mount point exists and create if it doesn't. # if [ ! −e $MOUNTPOINT ]; then mkdir −p $MOUNTPOINT fi ## # Take care of /etc/fstab so mounting is easy. # Appendix A. Contributed Scripts 445 Advanced Bash−Scripting Guide if ! grep −q "^$SYMLINKDEV" /etc/fstab; then # Add an fstab entry echo −e \ "$SYMLINKDEV\t\t$MOUNTPOINT\t\tauto\tnoauto,owner,kudzu 0 0" \ >> /etc/fstab fi done if [ ! −z "$REMOVER" ]; then ## # Make sure this script is triggered on device removal. # mkdir −p `dirname $REMOVER` ln −s $IAM $REMOVER fi elif [ "${ACTION}" = "remove" ]; then ## # If the device is mounted, unmount it cleanly. # if grep −q "$MOUNTPOINT" /etc/mtab; then # unmount cleanly umount −l $MOUNTPOINT fi ## # Remove it from /etc/fstab if it's there. # if grep −q "^$SYMLINKDEV" /etc/fstab; then grep −v "^$SYMLINKDEV" /etc/fstab > /etc/.fstab.new mv −f /etc/.fstab.new /etc/fstab fi fi exit 0 Here is something to warm the hearts of webmasters and mistresses everywhere: a script that saves weblogs. Example A−23. Preserving weblogs #!/bin/bash # archiveweblogs.sh v1.0 # Troy Engel # Slightly modified by document author. # Used with permission. # # This script will preserve the normally rotated and #+ thrown away weblogs from a default RedHat/Apache installation. # It will save the files with a date/time stamp in the filename, #+ bzipped, to a given directory. # # Run this from crontab nightly at an off hour, #+ as bzip2 can suck up some serious CPU on huge logs: # 0 2 * * * /opt/sbin/archiveweblogs.sh PROBLEM=66 # Set this to your backup dir. BKP_DIR=/opt/backups/weblogs Appendix A. Contributed Scripts 446 Advanced Bash−Scripting Guide # Default Apache/RedHat stuff LOG_DAYS="4 3 2 1" LOG_DIR=/var/log/httpd LOG_FILES="access_log error_log" # Default RedHat program locations LS=/bin/ls MV=/bin/mv ID=/usr/bin/id CUT=/bin/cut COL=/usr/bin/column BZ2=/usr/bin/bzip2 # Are we root? USER=`$ID −u` if [ "X$USER" != "X0" ]; then echo "PANIC: Only root can run this script!" exit $PROBLEM fi # Backup dir exists/writable? if [ ! −x $BKP_DIR ]; then echo "PANIC: $BKP_DIR doesn't exist or isn't writable!" exit $PROBLEM fi # Move, rename and bzip2 the logs for logday in $LOG_DAYS; do for logfile in $LOG_FILES; do MYFILE="$LOG_DIR/$logfile.$logday" if [ −w $MYFILE ]; then DTS=`$LS −lgo −−time−style=+%Y%m%d $MYFILE | $COL −t | $CUT −d ' ' −f7` $MV $MYFILE $BKP_DIR/$logfile.$DTS $BZ2 $BKP_DIR/$logfile.$DTS else # Only spew an error if the file exits (ergo non−writable). if [ −f $MYFILE ]; then echo "ERROR: $MYFILE not writable. Skipping." fi fi done done exit 0 How do you keep the shell from expanding and reinterpreting strings? Example A−24. Protecting literal strings #! /bin/bash # protect_literal.sh # set −vx :<<−'_Protect_Literal_String_Doc' Copyright (c) Michael S. Zick, 2003; All Rights Reserved License: Unrestricted reuse in any form, for any purpose. Warranty: None Appendix A. Contributed Scripts 447 Advanced Bash−Scripting Guide Revision: $ID$ Documentation redirected to the Bash no−operation. Bash will '/dev/null' this block when the script is first read. (Uncomment the above set command to see this action.) Remove the first (Sha−Bang) line when sourcing this as a library procedure. Also comment out the example use code in the two places where shown. Usage: _protect_literal_str 'Whatever string meets your ${fancy}' Just echos the argument to standard out, hard quotes restored. $(_protect_literal_str 'Whatever string meets your ${fancy}') as the right−hand−side of an assignment statement. Does: As the right−hand−side of an assignment, preserves the hard quotes protecting the contents of the literal during assignment. Notes: The strange names (_*) are used to avoid trampling on the user's chosen names when this is sourced as a library. _Protect_Literal_String_Doc # The 'for illustration' function form _protect_literal_str() { # Pick an un−used, non−printing character as local IFS. # Not required, but shows that we are ignoring it. local IFS=$'\x1B' # \ESC character # Enclose the All−Elements−Of in hard quotes during assignment. local tmp=$'\x27'$@$'\x27' # local tmp=$'\''$@$'\'' # Even uglier. local len=${#tmp} echo $tmp is $len long. } # This is the short−named version. _pls() { local IFS=$'x1B' echo $'\x27'$@$'\x27' } # Info only. # Output AND information. # \ESC character (not required) # Hard quoted parameter glob # :<<−'_Protect_Literal_String_Test' # # # Remove the above "# " to disable this code. # # # # See how that looks echo echo "− − Test One − _protect_literal_str _protect_literal_str echo when printed. −" 'Hello $user' 'Hello "${username}"' Appendix A. Contributed Scripts 448 Advanced Bash−Scripting Guide # # # # # # #+ # Which yields: − − Test One − − 'Hello $user' is 13 long. 'Hello "${username}"' is 21 long. Looks as expected, but why all of the trouble? The difference is hidden inside the Bash internal order of operations. Which shows when you use it on the RHS of an assignment. # Declare an array for test values. declare −a arrayZ # Assign elements with various types of quotes and escapes. arrayZ=( zero "$(_pls 'Hello ${Me}')" 'Hello ${You}' "\'Pass: ${pw}\'" ) # Now list that array and see what is there. echo "− − Test Two − −" for (( i=0 ; i<${#arrayZ[*]} ; i++ )) do echo Element $i: ${arrayZ[$i]} is: ${#arrayZ[$i]} long. done echo # # # # # # Which yields: − − Test Two − − Element 0: zero is: 4 long. Element 1: 'Hello ${Me}' is: 13 long. Element 2: Hello ${You} is: 12 long. Element 3: \'Pass: \' is: 10 long. # # # # Our marker element Our "$(_pls '...' )" Quotes are missing ${pw} expanded to nothing # Now make an assignment with that result. declare −a array2=( ${arrayZ[@]} ) # And print what happened. echo "− − Test Three − −" for (( i=0 ; i<${#array2[*]} ; i++ )) do echo Element $i: ${array2[$i]} is: ${#array2[$i]} long. done echo # # # # # # # # # # #+ # # # # # # Which yields: − − Test Three − − Element 0: zero is: 4 long. Element 1: Hello ${Me} is: 11 long. Element 2: Hello is: 5 long. Element 3: 'Pass: is: 6 long. Element 4: ' is: 1 long. # # # # # Our marker element. Intended result. ${You} expanded to nothing. Split on the whitespace. The end quote is here now. Our Element 1 has had its leading and trailing hard quotes stripped. Although not shown, leading and trailing whitespace is also stripped. Now that the string contents are set, Bash will always, internally, hard quote the contents as required during its operations. Why? Considering our "$(_pls 'Hello ${Me}')" construction: " ... " −> Expansion required, strip the quotes. $( ... ) −> Replace with the result of..., strip this. _pls ' ... ' −> called with literal arguments, strip the quotes. The result returned includes hard quotes; BUT the above processing Appendix A. Contributed Scripts 449 Advanced Bash−Scripting Guide #+ # # #+ # has already been done, so they become part of the value assigned. Similarly, during further usage of the string variable, the ${Me} is part of the contents (result) and survives any operations (Until explicitly told to evaluate the string). # Hint: See what happens when the hard quotes ($'\x27') are replaced #+ with soft quotes ($'\x22') in the above procedures. # Interesting also is to remove the addition of any quoting. # _Protect_Literal_String_Test # # # Remove the above "# " to disable this code. # # # exit 0 What if you want the shell to expand and reinterpret strings? Example A−25. Unprotecting literal strings #! /bin/bash # unprotect_literal.sh # set −vx :<<−'_UnProtect_Literal_String_Doc' Copyright (c) Michael S. Zick, 2003; All Rights Reserved License: Unrestricted reuse in any form, for any purpose. Warranty: None Revision: $ID$ Documentation redirected to the Bash no−operation. Bash will '/dev/null' this block when the script is first read. (Uncomment the above set command to see this action.) Remove the first (Sha−Bang) line when sourcing this as a library procedure. Also comment out the example use code in the two places where shown. Usage: Complement of the "$(_pls 'Literal String')" function. (See the protect_literal.sh example.) StringVar=$(_upls ProtectedSringVariable) Does: When used on the right−hand−side of an assignment statement; makes the substitions embedded in the protected string. Notes: The strange names (_*) are used to avoid trampling on the user's chosen names when this is sourced as a library. _UnProtect_Literal_String_Doc _upls() { Appendix A. Contributed Scripts 450 Advanced Bash−Scripting Guide local IFS=$'x1B' eval echo $@ } # :<<−'_UnProtect_Literal_String_Test' # # # Remove the above "# " to disable this code. # # # # \ESC character (not required) # Substitution on the glob. _pls() { local IFS=$'x1B' echo $'\x27'$@$'\x27' } # Declare an array for test values. declare −a arrayZ # \ESC character (not required) # Hard quoted parameter glob # Assign elements with various types of quotes and escapes. arrayZ=( zero "$(_pls 'Hello ${Me}')" 'Hello ${You}' "\'Pass: ${pw}\'" ) # Now make an assignment with that result. declare −a array2=( ${arrayZ[@]} ) # # # # # # # Which yielded: − − Test Three − − Element 0: zero is: 4 long Element 1: Hello ${Me} is: 11 long Element 2: Hello is: 5 long Element 3: 'Pass: is: 6 long Element 4: ' is: 1 long # # # # # Our marker element. Intended result. ${You} expanded to nothing. Split on the whitespace. The end quote is here now. # set −vx # # #+ # Initialize 'Me' to something for the embedded ${Me} substitution. This needs to be done ONLY just prior to evaluating the protected string. (This is why it was protected to begin with.) Me="to the array guy." # Set a string variable destination to the result. newVar=$(_upls ${array2[1]}) # Show what the contents are. echo $newVar # Do we really need a function to do this? newerVar=$(eval echo ${array2[1]}) echo $newerVar # #+ # #+ I guess not, but the _upls function gives us a place to hang the documentation on. This helps when we forget what a # construction like: $(eval echo ... ) means. # What if Me isn't set when the protected string is evaluated? unset Me newestVar=$(_upls ${array2[1]}) echo $newestVar # Just gone, no hints, no runs, no errors. # Why in the world? Appendix A. Contributed Scripts 451 Advanced Bash−Scripting Guide # #+ #+ # # #+ Setting the contents of a string variable containing character sequences that have a meaning to Bash is a general problem in script programming. This problem is now solved in eight lines of code (and four pages of description). # Where is all this going? # Dynamic content Web pages as an array of Bash strings. # Content set per request by a Bash 'eval' command #+ on the stored page template. # Not intended to replace PHP, just an interesting thing to do. ### # Don't have a webserver application? # No problem, check the example directory of the Bash source; #+ there is a Bash script for that also. # _UnProtect_Literal_String_Test # # # Remove the above "# " to disable this code. # # # exit 0 To end this section, a review of the basics . . . and more. Example A−26. Basics Reviewed #!/bin/bash # basics−reviewed.bash # File extension == *.bash == specific to Bash # # # # # # Copyright (c) Michael S. Zick, 2003; All rights reserved. License: Use in any form, for any purpose. Revision: $ID$ Edited for layout by M.C. (author of the "Advanced Bash Scripting Guide") # # # #+ This script tested under Bash versions 2.04, 2.05a and 2.05b. It may not work with earlier versions. This demonstration script generates one −−intentional−− "command not found" error message. See line 394. # The current Bash maintainer, Chet Ramey, has fixed the items noted #+ for an upcoming version of Bash. ###−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−### ### Pipe the output of this script to 'more' ### ###+ else it will scroll off the page. ### ### ### ### You may also redirect its output ### ###+ to a file for examination. ### ###−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−### Appendix A. Contributed Scripts 452 Advanced Bash−Scripting Guide # Most of the following points are described at length in #+ the text of the foregoing "Advanced Bash Scripting Guide." # This demonstration script is mostly just a reorganized presentation. # −− msz # Variables are not typed unless otherwise specified. # Variables are named. Names must contain a non−digit. # File descriptor names (as in, for example: 2>&1) #+ contain ONLY digits. # Parameters and Bash array elements are numbered. # (Parameters are very similar to Bash arrays.) # A variable name may be undefined (null reference). unset VarNull # A variable name may be defined but empty (null contents). VarEmpty='' # Two, adjacent, single quotes. # A variable name my be defined and non−empty VarSomething='Literal' # A variable may contain: # * A whole number as a signed 32−bit (or larger) integer # * A string # A variable may also be an array. # A string may contain embedded blanks and may be treated #+ as if it where a function name with optional arguments. # The names of variables and the names of functions #+ are in different namespaces. # A variable may be defined as a Bash array either explicitly or #+ implicitly by the syntax of the assignment statement. # Explicit: declare −a ArrayVar # The echo command is a built−in. echo $VarSomething # The printf command is a built−in. # Translate %s as: String−Format printf %s $VarSomething # No linebreak specified, none output. echo # Default, only linebreak output. # The Bash parser word breaks on whitespace. # Whitespace, or the lack of it is significant. # (This holds true in general; there are, of course, exceptions.) # Translate the DOLLAR_SIGN character as: Content−Of. Appendix A. Contributed Scripts 453 Advanced Bash−Scripting Guide # Extended−Syntax way of writing Content−Of: echo ${VarSomething} # The ${ ... } Extended−Syntax allows more than just the variable #+ name to be specified. # In general, $VarSomething can always be written as: ${VarSomething}. # Call this script with arguments to see the following in action. # Outside of double−quotes, the special characters @ and * #+ specify identical behavior. # May be pronounced as: All−Elements−Of. # Without specification of a name, they refer to the #+ pre−defined parameter Bash−Array. # Glob−Pattern references echo $* echo ${*} # All parameters to script or function # Same # Bash disables filename expansion for Glob−Patterns. # Only character matching is active. # All−Elements−Of references echo $@ echo ${@} # Same as above # Same as above # Within double−quotes, the behavior of Glob−Pattern references #+ depends on the setting of IFS (Input Field Separator). # Within double−quotes, All−Elements−Of references behave the same. # Specifying only the name of a variable holding a string refers #+ to all elements (characters) of a string. # To specify an element (character) of a string, #+ the Extended−Syntax reference notation (see below) MAY be used. # Specifying only the name of a Bash array references #+ the subscript zero element, #+ NOT the FIRST DEFINED nor the FIRST WITH CONTENTS element. # Additional qualification is needed to reference other elements, #+ which means that the reference MUST be written in Extended−Syntax. # The general form is: ${name[subscript]}. # The string forms may also be used: ${name:subscript} #+ for Bash−Arrays when referencing the subscript zero element. Appendix A. Contributed Scripts 454 Advanced Bash−Scripting Guide # Bash−Arrays are implemented internally as linked lists, #+ not as a fixed area of storage as in some programming languages. # # Characteristics of Bash arrays (Bash−Arrays): −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # If not otherwise specified, Bash−Array subscripts begin with #+ subscript number zero. Literally: [0] # This is called zero−based indexing. ### # If not otherwise specified, Bash−Arrays are subscript packed #+ (sequential subscripts without subscript gaps). ### # Negative subscripts are not allowed. ### # Elements of a Bash−Array need not all be of the same type. ### # Elements of a Bash−Array may be undefined (null reference). # That is, a Bash−Array my be "subscript sparse." ### # Elements of a Bash−Array may be defined and empty (null contents). ### # Elements of a Bash−Array may contain: # * A whole number as a signed 32−bit (or larger) integer # * A string # * A string formated so that it appears to be a function name # + with optional arguments ### # Defined elements of a Bash−Array may be undefined (unset). # That is, a subscript packed Bash−Array may be changed # + into a subscript sparse Bash−Array. ### # Elements may be added to a Bash−Array by defining an element #+ not previously defined. ### # For these reasons, I have been calling them "Bash−Arrays". # I'll return to the generic term "array" from now on. # −− msz # Demo time −− initialize the previously declared ArrayVar as a #+ sparse array. # (The 'unset ... ' is just documentation here.) unset ArrayVar[0] ArrayVar[1]=one ArrayVar[2]='' unset ArrayVar[3] ArrayVar[4]='four' # # # # # Just for the record Unquoted literal Defined, and empty Just for the record Quoted literal # Translate the %q format as: Quoted−Respecting−IFS−Rules. echo echo '− − Outside of double−quotes − −' ### printf %q ${ArrayVar[*]} # Glob−Pattern All−Elements−Of echo echo 'echo command:'${ArrayVar[*]} Appendix A. Contributed Scripts 455 Advanced Bash−Scripting Guide ### printf %q ${ArrayVar[@]} echo echo 'echo command:'${ArrayVar[@]} # All−Elements−Of # The use of double−quotes may be translated as: Enable−Substitution. # There are five cases recognized for the IFS setting. echo echo '− − Within double−quotes − Default IFS of space−tab−newline − −' IFS=$'\x20'$'\x09'$'\x0A' # These three bytes, #+ in exactly this order. printf %q "${ArrayVar[*]}" # Glob−Pattern All−Elements−Of echo echo 'echo command:'"${ArrayVar[*]}" ### printf %q "${ArrayVar[@]}" # All−Elements−Of echo echo 'echo command:'"${ArrayVar[@]}" echo echo '− − Within double−quotes − First character of IFS is ^ − −' # Any printing, non−whitespace character should do the same. IFS='^'$IFS # ^ + space tab newline ### printf %q "${ArrayVar[*]}" # Glob−Pattern All−Elements−Of echo echo 'echo command:'"${ArrayVar[*]}" ### printf %q "${ArrayVar[@]}" # All−Elements−Of echo echo 'echo command:'"${ArrayVar[@]}" echo echo '− − Within double−quotes − Without whitespace in IFS − −' IFS='^:%!' ### printf %q "${ArrayVar[*]}" # Glob−Pattern All−Elements−Of echo echo 'echo command:'"${ArrayVar[*]}" ### printf %q "${ArrayVar[@]}" # All−Elements−Of echo echo 'echo command:'"${ArrayVar[@]}" echo echo '− − Within double−quotes − IFS set and empty − −' IFS='' ### printf %q "${ArrayVar[*]}" # Glob−Pattern All−Elements−Of echo echo 'echo command:'"${ArrayVar[*]}" ### printf %q "${ArrayVar[@]}" # All−Elements−Of echo echo 'echo command:'"${ArrayVar[@]}" Appendix A. Contributed Scripts 456 Advanced Bash−Scripting Guide echo echo '− − Within double−quotes − IFS undefined − −' unset IFS ### printf %q "${ArrayVar[*]}" # Glob−Pattern All−Elements−Of echo echo 'echo command:'"${ArrayVar[*]}" ### printf %q "${ArrayVar[@]}" # All−Elements−Of echo echo 'echo command:'"${ArrayVar[@]}" # Put IFS back to the default. # Default is exactly these three bytes. IFS=$'\x20'$'\x09'$'\x0A' # In exactly this order. # Interpretation of the above outputs: # A Glob−Pattern is I/O; the setting of IFS matters. ### # An All−Elements−Of does not consider IFS settings. ### # Note the different output using the echo command and the #+ quoted format operator of the printf command. # Recall: # Parameters are similar to arrays and have the similar behaviors. ### # The above examples demonstrate the possible variations. # To retain the shape of a sparse array, additional script #+ programming is required. ### # The source code of Bash has a routine to output the #+ [subscript]=value array assignment format. # As of version 2.05b, that routine is not used, #+ but that might change in future releases. # The length of a string, measured in non−null elements (characters): echo echo '− − Non−quoted references − −' echo 'Non−Null character count: '${#VarSomething}' characters.' # test='Lit'$'\x00''eral' # echo ${#test} # $'\x00' is a null character. # See that? # The length of an array, measured in defined elements, #+ including null content elements. echo echo 'Defined content count: '${#ArrayVar[@]}' elements.' # That is NOT the maximum subscript (4). # That is NOT the range of the subscripts (1 . . 4 inclusive). # It IS the length of the linked list. ### # Both the maximum subscript and the range of the subscripts may #+ be found with additional script programming. Appendix A. Contributed Scripts 457 Advanced Bash−Scripting Guide # The length of a string, measured in non−null elements (characters): echo echo '− − Quoted, Glob−Pattern references − −' echo 'Non−Null character count: '"${#VarSomething}"' characters.' # The length of an array, measured in defined elements, #+ including null−content elements. echo echo 'Defined element count: '"${#ArrayVar[*]}"' elements.' # # # #+ Interpretation: Substitution does not effect the ${# ... } operation. Suggestion: Always use the All−Elements−Of character if that is what is intended (independence from IFS). # Define a simple function. # I include an underscore in the name #+ to make it distinctive in the examples below. ### # Bash separates variable names and function names #+ in different namespaces. # The Mark−One eyeball isn't that advanced. ### _simple() { echo −n 'SimpleFunc'$@ # Newlines are swallowed in } #+ result returned in any case. # The ( ... ) notation invokes a command or function. # The $( ... ) notation is pronounced: Result−Of. # Invoke the function _simple echo echo '− − Output of function _simple − −' _simple # Try passing arguments. echo # or (_simple) # Try passing arguments. echo echo '− Is there a variable of that name? −' echo $_simple not defined # No variable by that name. # Invoke the result of function _simple (Error msg intended) ### $(_simple) # # echo ### # The first word of the result of function _simple #+ is neither a valid Bash command nor the name of a defined function. ### # This demonstrates that the output of _simple is subject to evaluation. ### # Gives an error message: line 394: SimpleFunc: command not found −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Appendix A. Contributed Scripts 458 Advanced Bash−Scripting Guide # Interpretation: # A function can be used to generate in−line Bash commands. # A simple function where the first word of result IS a bash command: ### _print() { echo −n 'printf %q '$@ } echo '− − Outputs of function _print − −' _print parm1 parm2 # An Output NOT A Command. echo $(_print parm1 parm2) # Executes: printf %q parm1 parm2 # See above IFS examples for the #+ various possibilities. echo $(_print $VarSomething) echo # The predictable result. # Function variables # −−−−−−−−−−−−−−−−−− echo echo '− − Function variables − −' # A variable may represent a signed integer, a string or an array. # A string may be used like a function name with optional arguments. # set −vx declare −f funcVar funcVar=_print $funcVar parm1 echo funcVar=$(_print ) $funcVar $funcVar $VarSomething echo funcVar=$(_print $VarSomething) $funcVar echo funcVar="$(_print $VarSomething)" $funcVar echo # #+ # # # Enable if desired #+ in namespace of functions # Contains name of function. # Same as _print at this point. # Contains result of function. # No input, No output. # The predictable result. # $VarSomething replaced HERE. # The expansion is part of the #+ variable contents. # $VarSomething replaced HERE. # The expansion is part of the #+ variable contents. The difference between the unquoted and the double−quoted versions above can be seen in the "protect_literal.sh" example. The first case above is processed as two, unquoted, Bash−Words. The second case above is processed as one, quoted, Bash−Word. # Delayed replacement # −−−−−−−−−−−−−−−−−−− Appendix A. Contributed Scripts 459 Advanced Bash−Scripting Guide echo echo '− − Delayed replacement − −' funcVar="$(_print '$VarSomething')" # No replacement, single Bash−Word. eval $funcVar # $VarSomething replaced HERE. echo VarSomething='NewThing' eval $funcVar echo # $VarSomething replaced HERE. # Restore the original setting trashed above. VarSomething=Literal # #+ # #+ There are a pair of functions demonstrated in the "protect_literal.sh" and "unprotect_literal.sh" examples. These are general purpose functions for delayed replacement literals containing variables. # REVIEW: # −−−−−− # A string can be considered a Classic−Array of elements (characters). # A string operation applies to all elements (characters) of the string #+ (in concept, anyway). ### # The notation: ${array_name[@]} represents all elements of the #+ Bash−Array: array_name. ### # The Extended−Syntax string operations can be applied to all #+ elements of an array. ### # This may be thought of as a For−Each operation on a vector of strings. ### # Parameters are similar to an array. # The initialization of a parameter array for a script #+ and a parameter array for a function only differ #+ in the initialization of ${0}, which never changes its setting. ### # Subscript zero of the script's parameter array contains #+ the name of the script. ### # Subscript zero of a function's parameter array DOES NOT contain #+ the name of the function. # The name of the current function is accessed by the $FUNCNAME variable. ### # A quick, review list follows (quick, not short). echo echo echo echo echo echo echo '− − Test (but not change) − −' '− null reference −' −n ${VarNull−'NotSet'}' ' ${VarNull} −n ${VarNull:−'NotSet'}' ' ${VarNull} # # # # NotSet NewLine only NotSet Newline only echo '− null contents −' echo −n ${VarEmpty−'Empty'}' ' # Only the space Appendix A. Contributed Scripts 460 Advanced Bash−Scripting Guide echo ${VarEmpty} echo −n ${VarEmpty:−'Empty'}' ' echo ${VarEmpty} echo '− contents −' echo ${VarSomething−'Content'} echo ${VarSomething:−'Content'} echo '− Sparse Array −' echo ${ArrayVar[@]−'not set'} # # # # # # ASCII−Art time State Y==yes, − Unset Y Empty N Contents N # Newline only # Empty # Newline only # Literal # Literal N==no :− Y Y N ${# ... } == 0 ${# ... } == 0 ${# ... } > 0 # Either the first and/or the second part of the tests #+ may be a command or a function invocation string. echo echo '− − Test 1 for undefined − −' declare −i t _decT() { t=$t−1 } # Null reference, set: t == −1 t=${#VarNull} ${VarNull− _decT } echo $t # Null contents, set: t == 0 t=${#VarEmpty} ${VarEmpty− _decT } echo $t # Results in zero. # Function executes, t now −1. # Results in zero. # _decT function NOT executed. # Contents, set: t == number of non−null characters VarSomething='_simple' # Set to valid function name. t=${#VarSomething} # non−zero length ${VarSomething− _decT } # Function _simple executed. echo $t # Note the Append−To action. # Exercise: clean up that example. unset t unset _decT VarSomething=Literal echo echo '− − Test and Change − −' echo '− Assignment if null reference −' echo −n ${VarNull='NotSet'}' ' # NotSet NotSet echo ${VarNull} unset VarNull echo '− Assignment if null reference −' echo −n ${VarNull:='NotSet'}' ' # NotSet NotSet echo ${VarNull} unset VarNull echo '− No assignment if null contents −' echo −n ${VarEmpty='Empty'}' ' # Space only Appendix A. Contributed Scripts 461 Advanced Bash−Scripting Guide echo ${VarEmpty} VarEmpty='' echo '− Assignment if null contents −' echo −n ${VarEmpty:='Empty'}' ' echo ${VarEmpty} VarEmpty='' # Empty Empty echo '− No change if already has contents −' echo ${VarSomething='Content'} # Literal echo ${VarSomething:='Content'} # Literal # "Subscript sparse" Bash−Arrays ### # Bash−Arrays are subscript packed, beginning with #+ subscript zero unless otherwise specified. ### # The initialization of ArrayVar was one way #+ to "otherwise specify". Here is the other way: ### echo declare −a ArraySparse ArraySparse=( [1]=one [2]='' [4]='four' ) # [0]=null reference, [2]=null content, [3]=null reference echo '− − Array−Sparse List − −' # Within double−quotes, default IFS, Glob−Pattern IFS=$'\x20'$'\x09'$'\x0A' printf %q "${ArraySparse[*]}" echo # Note that the output does not distinguish between "null content" #+ and "null reference". # Both print as escaped whitespace. ### # Note also that the output does NOT contain escaped whitespace #+ for the "null reference(s)" prior to the first defined element. ### # This behavior of 2.04, 2.05a and 2.05b has been reported #+ and may change in a future version of Bash. # To output a sparse array and maintain the [subscript]=value #+ relationship without change requires a bit of programming. # One possible code fragment: ### # local l=${#ArraySparse[@]} # Count of defined elements # local f=0 # Count of found subscripts # local i=0 # Subscript to test ( # Anonymous in−line function for (( l=${#ArraySparse[@]}, f = 0, i = 0 ; f < l ; i++ )) do # 'if defined then...' ${ArraySparse[$i]+ eval echo '\ ['$i']='${ArraySparse[$i]} ; (( f++ )) } done ) # The reader coming upon the above code fragment cold #+ might want to review "command lists" and "multiple commands on a line" #+ in the text of the foregoing "Advanced Bash Scripting Guide." ### Appendix A. Contributed Scripts 462 Advanced Bash−Scripting Guide # Note: # The "read −a array_name" version of the "read" command #+ begins filling array_name at subscript zero. # ArraySparse does not define a value at subscript zero. ### # The user needing to read/write a sparse array to either #+ external storage or a communications socket must invent #+ a read/write code pair suitable for their purpose. ### # Exercise: clean it up. unset ArraySparse echo echo '− − Conditional alternate (But not change)− −' echo '− No alternate if null reference −' echo −n ${VarNull+'NotSet'}' ' echo ${VarNull} unset VarNull echo '− No alternate if null reference −' echo −n ${VarNull:+'NotSet'}' ' echo ${VarNull} unset VarNull echo '− Alternate if null contents −' echo −n ${VarEmpty+'Empty'}' ' echo ${VarEmpty} VarEmpty='' echo '− No alternate if null contents −' echo −n ${VarEmpty:+'Empty'}' ' echo ${VarEmpty} VarEmpty='' echo '− Alternate if already has contents −' # Alternate literal echo −n ${VarSomething+'Content'}' ' echo ${VarSomething} # Invoke function echo −n ${VarSomething:+ $(_simple) }' ' echo ${VarSomething} echo echo '− − Sparse Array − −' echo ${ArrayVar[@]+'Empty'} echo echo '− − Test 2 for undefined − −' declare −i t _incT() { t=$t+1 } # Note: # This is the same test used in the sparse array #+ listing code fragment. # Null reference, set: t == −1 # Empty # Space only # Content Literal # SimpleFunc Literal # An array of 'Empty'(ies) Appendix A. Contributed Scripts 463 Advanced Bash−Scripting Guide t=${#VarNull}−1 ${VarNull+ _incT } echo $t' Null reference' # Null contents, set: t == 0 t=${#VarEmpty}−1 ${VarEmpty+ _incT } echo $t' Null content' # Results in minus−one. # Does not execute. # Results in minus−one. # Executes. # Contents, set: t == (number of non−null characters) t=${#VarSomething}−1 # non−null length minus−one ${VarSomething+ _incT } # Executes. echo $t' Contents' # Exercise: clean up that example. unset t unset _incT # ${name?err_msg} ${name:?err_msg} # These follow the same rules but always exit afterwards #+ if an action is specified following the question mark. # The action following the question mark may be a literal #+ or a function result. ### # ${name?} ${name:?} are test−only, the return can be tested. # Element operations # −−−−−−−−−−−−−−−−−− echo echo '− − Trailing sub−element selection − −' # Strings, Arrays and Positional parameters # Call this script with multiple arguments #+ to see the parameter selections. echo echo echo echo '− All −' ${VarSomething:0} ${ArrayVar[@]:0} ${@:0} # # # # all non−null characters all elements with content all parameters with content; ignoring parameter[0] echo echo echo echo echo '− All after −' ${VarSomething:1} ${ArrayVar[@]:1} ${@:2} # all non−null after character[0] # all after element[0] with content # all after param[1] with content echo echo '− Range after −' echo ${VarSomething:4:3} # ral # Three characters after # character[3] echo '− Sparse array gotch −' echo ${ArrayVar[@]:1:2} # # # four − The only element with content. Two elements after (if that many exist). the FIRST WITH CONTENTS Appendix A. Contributed Scripts 464 Advanced Bash−Scripting Guide #+ (the FIRST WITH CONTENTS is being #+ considered as if it #+ were subscript zero). Executed as if Bash considers ONLY array elements with CONTENT printf %q "${ArrayVar[@]:0:3}" # Try this one In versions 2.04, 2.05a and 2.05b, Bash does not handle sparse arrays as expected using this notation. The current Bash maintainer, Chet Ramey, has corrected this for an upcoming version of Bash. # # # #+ # # #+ echo '− Non−sparse array −' echo ${@:2:2} # Two parameters following parameter[1] # New victims for string vector examples: stringZ=abcABC123ABCabc arrayZ=( abcabc ABCABC 123123 ABCABC abcabc ) sparseZ=( [1]='abcabc' [3]='ABCABC' [4]='' [5]='123123' ) echo echo echo echo echo echo echo ' ' ' ' ' ' − − − − − − − Victim string − −'$stringZ'− − ' − Victim array − −'${arrayZ[@]}'− − ' − Sparse array − −'${sparseZ[@]}'− − ' [0]==null ref, [2]==null ref, [4]==null content − ' [1]=abcabc [3]=ABCABC [5]=123123 − ' non−null−reference count: '${#sparseZ[@]}' elements' echo echo '− − Prefix sub−element removal − −' echo '− − Glob−Pattern match must include the first character. − −' echo '− − Glob−Pattern may be a literal or a function result. − −' echo # Function returning a simple, Literal, Glob−Pattern _abc() { echo −n 'abc' } echo echo echo echo '− Shortest prefix −' ${stringZ#123} ${stringZ#$(_abc)} ${arrayZ[@]#abc} # Unchanged (not a prefix). # ABC123ABCabc # Applied to each element. # Fixed by Chet Ramey for an upcoming version of Bash. # echo ${sparseZ[@]#abc} # Version−2.05b core dumps. # The −it would be nice− First−Subscript−Of # echo ${#sparseZ[@]#*} # This is NOT valid Bash. echo echo echo echo echo '− Longest prefix −' ${stringZ##1*3} ${stringZ##a*C} ${arrayZ[@]##a*c} # Unchanged (not a prefix) # abc # ABCABC 123123 ABCABC # Fixed by Chet Ramey for an upcoming version of Bash # echo ${sparseZ[@]##a*c} # Version−2.05b core dumps. echo Appendix A. Contributed Scripts 465 Advanced Bash−Scripting Guide echo echo echo echo echo echo echo echo '− − Suffix sub−element removal − −' '− − Glob−Pattern match must include the last character. − −' '− − Glob−Pattern may be a literal or a function result. − −' '− Shortest suffix −' ${stringZ%1*3} ${stringZ%$(_abc)} ${arrayZ[@]%abc} # Unchanged (not a suffix). # abcABC123ABC # Applied to each element. # Fixed by Chet Ramey for an upcoming version of Bash. # echo ${sparseZ[@]%abc} # Version−2.05b core dumps. # The −it would be nice− Last−Subscript−Of # echo ${#sparseZ[@]%*} # This is NOT valid Bash. echo echo echo echo echo '− Longest suffix −' ${stringZ%%1*3} ${stringZ%%b*c} ${arrayZ[@]%%b*c} # Unchanged (not a suffix) #a # a ABCABC 123123 ABCABC a # Fixed by Chet Ramey for an upcoming version of Bash. # echo ${sparseZ[@]%%b*c} # Version−2.05b core dumps. echo echo echo echo echo echo echo echo echo '− '− '− '− '− '− ' − − − − − − Sub−element replacement − −' Sub−element at any location in string. − −' First specification is a Glob−Pattern − −' Glob−Pattern may be a literal or Glob−Pattern function result. − −' Second specification may be a literal or function result. − −' Second specification may be unspecified. Pronounce that' as: Replace−With−Nothing (Delete) − −' # Function returning a simple, Literal, Glob−Pattern _123() { echo −n '123' } echo echo echo echo echo echo echo echo echo echo echo '− Replace first occurrence −' ${stringZ/$(_123)/999} # Changed (123 is a component). ${stringZ/ABC/xyz} # xyzABC123ABCabc ${arrayZ[@]/ABC/xyz} # Applied to each element. ${sparseZ[@]/ABC/xyz} # Works as expected. '− Delete first occurrence −' ${stringZ/$(_123)/} ${stringZ/ABC/} ${arrayZ[@]/ABC/} ${sparseZ[@]/ABC/} # The replacement need not be a literal, #+ since the result of a function invocation is allowed. # This is general to all forms of replacement. echo echo '− Replace first occurrence with Result−Of −' echo ${stringZ/$(_123)/$(_simple)} # Works as expected. echo ${arrayZ[@]/ca/$(_simple)} # Applied to each element. echo ${sparseZ[@]/ca/$(_simple)} # Works as expected. Appendix A. Contributed Scripts 466 Advanced Bash−Scripting Guide echo echo echo echo echo echo echo echo echo echo echo echo '− Replace all occurrences −' ${stringZ//[b2]/X} ${stringZ//abc/xyz} ${arrayZ[@]//abc/xyz} ${sparseZ[@]//abc/xyz} # # # # X−out b's and 2's xyzABC123ABCxyz Applied to each element. Works as expected. '− Delete all occurrences −' ${stringZ//[b2]/} ${stringZ//abc/} ${arrayZ[@]//abc/} ${sparseZ[@]//abc/} echo echo '− − Prefix sub−element replacement − −' echo '− − Match must include the first character. − −' echo echo echo echo echo echo echo echo echo echo echo echo '− Replace prefix occurrences −' ${stringZ/#[b2]/X} # Unchanged (neither is a prefix). ${stringZ/#$(_abc)/XYZ} # XYZABC123ABCabc ${arrayZ[@]/#abc/XYZ} # Applied to each element. ${sparseZ[@]/#abc/XYZ} # Works as expected. '− Delete prefix occurrences −' ${stringZ/#[b2]/} ${stringZ/#$(_abc)/} ${arrayZ[@]/#abc/} ${sparseZ[@]/#abc/} echo echo '− − Suffix sub−element replacement − −' echo '− − Match must include the last character. − −' echo echo echo echo echo echo echo echo echo echo echo echo '− Replace suffix occurrences −' ${stringZ/%[b2]/X} # Unchanged (neither is a suffix). ${stringZ/%$(_abc)/XYZ} # abcABC123ABCXYZ ${arrayZ[@]/%abc/XYZ} # Applied to each element. ${sparseZ[@]/%abc/XYZ} # Works as expected. '− Delete suffix occurrences −' ${stringZ/%[b2]/} ${stringZ/%$(_abc)/} ${arrayZ[@]/%abc/} ${sparseZ[@]/%abc/} echo echo '− − Special cases of null Glob−Pattern − −' echo echo '− Prefix all −' # null substring pattern means 'prefix' echo ${stringZ/#/NEW} # NEWabcABC123ABCabc echo ${arrayZ[@]/#/NEW} # Applied to each element. echo ${sparseZ[@]/#/NEW} # Applied to null−content also. # That seems reasonable. Appendix A. Contributed Scripts 467 Advanced Bash−Scripting Guide echo echo '− Suffix all −' # null substring pattern means 'suffix' echo ${stringZ/%/NEW} # abcABC123ABCabcNEW echo ${arrayZ[@]/%/NEW} # Applied to each element. echo ${sparseZ[@]/%/NEW} # Applied to null−content also. # That seems reasonable. echo echo '− − Special case For−Each Glob−Pattern − −' echo '− − − − This is a nice−to−have dream − − − −' echo _GenFunc() { echo −n ${0} # Illustration only. # Actually, that would be an arbitrary computation. } # All occurrences, matching the AnyThing pattern. # Currently //*/ does not match null−content nor null−reference. # /#/ and /%/ does match null−content but not null−reference. echo ${sparseZ[@]//*/$(_GenFunc)} # A possible syntax would be to make #+ the parameter notation used within this construct mean: # ${1} − The full element # ${2} − The prefix, if any, to the matched sub−element # ${3} − The matched sub−element # ${4} − The suffix, if any, to the matched sub−element # # echo ${sparseZ[@]//*/$(_GenFunc ${3})} # Same as ${1} here. # Perhaps it will be implemented in a future version of Bash. exit 0 Appendix A. Contributed Scripts 468 Appendix B. Reference Cards The following reference cards provide a useful summary of certain scripting concepts. The foregoing text treats these matters in more depth and gives usage examples. Table B−1. Special Shell Variables Variable $0 $1 $2 − $9 ${10} $# "$*" "$@" ${#*} ${#@} $? $$ $− $_ $! Meaning Name of script Positional parameter #1 Positional parameters #2 − #9 Positional parameter #10 Number of positional parameters All the positional parameters (as a single word) * All the positional parameters (as separate strings) Number of command line parameters passed to script Number of command line parameters passed to script Return value Process ID (PID) of script Flags passed to script (using set) Last argument of previous command Process ID (PID) of last job run in background * Must be quoted, otherwise it defaults to "$@". Table B−2. TEST Operators: Binary Comparison Operator Meaning −−−−− Operator String Comparison = == != \< \> −z −n Arithmetic Comparison within double parentheses (( ... )) Meaning Arithmetic Comparison −eq Equal to −ne −lt −le −gt −ge Not equal to Less than Less than or equal to Greater than Greater than or equal to Equal to Equal to Not equal to Less than (ASCII) * Greater than (ASCII) * String is empty String is not empty Appendix B. Reference Cards 469 Advanced Bash−Scripting Guide > >= < <= Greater than Greater than or equal to Less than Less than or equal to * If within a double−bracket [[ ... ]] test construct, then no escape \ is needed. Table B−3. TEST Operators: Files Operator −e −f −d −h −L −b −c −p −S −t −N −O −G Tests Whether File exists File is a regular file File is a directory File is a symbolic link File is a symbolic link File is a block device File is a character device File is a pipe File is a socket File is associated with a terminal File modified since it was last read You own the file Group id of file same as yours −−−−− Operator −s −r −w −x −g −u −k Tests Whether File is not zero size File has read permission File has write permission File has execute permission sgid flag set suid flag set "sticky bit" set F1 −nt F2 F1 −ot F2 F1 −ef F2 File F1 is newer than F2 * File F1 is older than F2 * Files F1 and F2 are hard links to the same file * ! "NOT" (reverses sense of above tests) * Binary operator (requires two operands). Table B−4. Parameter Substitution and Expansion Expression ${var} Meaning Value of var, same as $var ${var−DEFAULT} If var not set, evaluate expression as $DEFAULT * ${var:−DEFAULT} If var not set or is empty, evaluate expression as $DEFAULT * ${var=DEFAULT} If var not set, evaluate expression as $DEFAULT * ${var:=DEFAULT} If var not set, evaluate expression as $DEFAULT * Appendix B. Reference Cards 470 Advanced Bash−Scripting Guide ${var+OTHER} ${var:+OTHER} If var set, evaluate expression as $OTHER, otherwise as null string If var set, evaluate expression as $OTHER, otherwise as null string ${var?ERR_MSG} If var not set, print $ERR_MSG * ${var:?ERR_MSG} If var not set, print $ERR_MSG * ${!varprefix*} Matches all previously declared variables beginning with varprefix ${!varprefix@} Matches all previously declared variables beginning with varprefix * Of course if var is set, evaluate the expression as $var. Table B−5. String Operations Expression ${#string} ${string:position} ${string:position:length} Meaning Length of $string Extract substring from $string at $position Extract $length characters substring from $string at $position Strip shortest match of $substring from front of $string Strip longest match of $substring from front of $string Strip shortest match of $substring from back of $string Strip longest match of $substring from back of $string Replace first match of $substring with $replacement Replace all matches of $substring with $replacement If $substring matches front end of $string, substitute $replacement for $substring If $substring matches back end of $string, substitute $replacement for $substring ${string#substring} ${string##substring} ${string%substring} ${string%%substring} ${string/substring/replacement} ${string//substring/replacement} ${string/#substring/replacement} ${string/%substring/replacement} expr match "$string" '$substring' expr "$string" : '$substring' expr index "$string" $substring Appendix B. Reference Cards Length of matching $substring* at beginning of $string Length of matching $substring* at beginning of $string 471 Advanced Bash−Scripting Guide Numerical position in $string of first character in $substring that matches Extract $length characters from $string starting at $position Extract $substring* at beginning of $string expr substr $string $position $length expr match "$string" '\($substring\)' expr "$string" : '\($substring\)' Extract $substring* at beginning of $string expr match "$string" Extract $substring* at end of $string '.*\($substring\)' expr "$string" : '.*\($substring\)' Extract $substring* at end of $string * Where $substring is a regular expression. Table B−6. Miscellaneous Constructs Expression Brackets if [ CONDITION ] if [[ CONDITION ]] Array[1]=element1 [a−z] Curly Brackets ${variable} ${!variable} { command1; command2 } {string1,string2,string3,...} Interpretation Test construct Extended test construct Array initialization Range of characters within a Regular Expression Parameter substitution Indirect variable reference Block of code Brace expansion Parentheses ( command1; command2 ) Command group executed within a subshell Array=(element1 element2 element3) Array initialization result=$(COMMAND) Execute command in subshell and assign result to variable >(COMMAND) Process substitution <(COMMAND) Process substitution Double Parentheses (( var = 78 )) var=$(( 20 + 5 )) Quoting Appendix B. Reference Cards 472 Integer arithmetic Integer arithmetic, with variable assignment Advanced Bash−Scripting Guide "$variable" 'string' Back Quotes result=`COMMAND` "Weak" quoting "Strong" quoting Execute command in subshell and assign result to variable Appendix B. Reference Cards 473 Appendix C. A Sed and Awk Micro−Primer This is a very brief introduction to the sed and awk text processing utilities. We will deal with only a few basic commands here, but that will suffice for understanding simple sed and awk constructs within shell scripts. sed: a non−interactive text file editor awk: a field−oriented pattern processing language with a C−like syntax For all their differences, the two utilities share a similar invocation syntax, both use regular expressions , both read input by default from stdin, and both output to stdout. These are well−behaved Unix tools, and they work together well. The output from one can be piped into the other, and their combined capabilities give shell scripts some of the power of Perl. One important difference between the utilities is that while shell scripts can easily pass arguments to sed, it is more complicated for awk (see Example 34−3 and Example 9−22). C.1. Sed Sed is a non−interactive line editor. It receives text input, whether from stdin or from a file, performs certain operations on specified lines of the input, one line at a time, then outputs the result to stdout or to a file. Within a shell script, sed is usually one of several tool components in a pipe. Sed determines which lines of its input that it will operate on from the address range passed to it. [69] Specify this address range either by line number or by a pattern to match. For example, 3d signals sed to delete line 3 of the input, and /windows/d tells sed that you want every line of the input containing a match to "windows" deleted. Of all the operations in the sed toolkit, we will focus primarily on the three most commonly used ones. These are printing (to stdout), deletion, and substitution. Table C−1. Basic sed operators Operator [address−range]/p [address−range]/d s/pattern1/pattern2/ [address−range]/s/pattern1/pattern2/ Name print delete substitute substitute Effect Print [specified address range] Delete [specified address range] Substitute pattern2 for first instance of pattern1 in a line Substitute pattern2 for first instance of pattern1 in a line, over address−range replace any character in pattern1 with the corresponding character in pattern2, over 474 [address−range]/y/pattern1/pattern2/ transform Appendix C. A Sed and Awk Micro−Primer Advanced Bash−Scripting Guide address−range (equivalent of tr) Operate on every pattern match within each matched line of input g global Unless the g (global) operator is appended to a substitute command, the substitution operates only on the first instance of a pattern match within each line. From the command line and in a shell script, a sed operation may require quoting and certain options. sed −e '/^$/d' $filename # The −e option causes the next string to be interpreted as an editing instruction. # (If passing only a single instruction to "sed", the "−e" is optional.) # The "strong" quotes ('') protect the RE characters in the instruction #+ from reinterpretation as special characters by the body of the script. # (This reserves RE expansion of the instruction for sed.) # # Operates on the text contained in file $filename. In certain cases, a sed editing command will not work with single quotes. filename=file1.txt pattern=BEGIN sed "/^$pattern/d" "$filename" # Works as specified. # sed '/^$pattern/d' "$filename" has unexpected results. # In this instance, with strong quoting (' ... '), #+ "$pattern" will not expand to "BEGIN". Sed uses the −e option to specify that the following string is an instruction or set of instructions. If there is only a single instruction contained in the string, then this option may be omitted. sed −n '/xzy/p' # The −n option # Otherwise all # The −e option $filename tells sed to print only those lines matching the pattern. input lines would print. not necessary here since there is only a single editing instruction. Table C−2. Examples of sed operators Notation 8d /^$/d 1,/^$/d /Jones/p s/Windows/Linux/ s/BSOD/stability/g s/ *$// s/00*/0/g Effect Delete 8th line of input. Delete all blank lines. Delete from beginning of input up to, and including first blank line. Print only lines containing "Jones" (with −n option). Substitute "Linux" for first instance of "Windows" found in each input line. Substitute "stability" for every instance of "BSOD" found in each input line. Delete all spaces at the end of every line. Compress all consecutive sequences of zeroes into a single zero. Appendix C. A Sed and Awk Micro−Primer 475 Advanced Bash−Scripting Guide /GUI/d s/GUI//g Delete all lines containing "GUI". Delete all instances of "GUI", leaving the remainder of each line intact. Substituting a zero−length string for another is equivalent to deleting that string within a line of input. This leaves the remainder of the line intact. Applying s/GUI// to the line The most important parts of any application are its GUI and sound effects results in The most important parts of any application are its and sound effects The backslash represents a newline as a substitution character. In this special case, the replacement expression continues on the next line. s/^ /g */\ This substitution replaces line−beginning spaces with a newline. The net result is to replace paragraph indents with a blank line between paragraphs. An address range followed by one or more operations may require open and closed curly brackets, with appropriate newlines. /[0−9A−Za−z]/,/^$/{ /^$/d } This deletes only the first of each set of consecutive blank lines. That might be useful for single−spacing a text file, but retaining the blank line(s) between paragraphs. A quick way to double−space a text file is sed G filename. For illustrative examples of sed within shell scripts, see: 1. Example 34−1 2. Example 34−2 3. Example 12−3 4. Example A−3 5. Example 12−15 6. Example 12−23 7. Example A−13 8. Example A−18 9. Example 12−27 10. Example 10−9 11. Example 12−37 12. Example A−2 13. Example 12−13 14. Example 12−11 15. Example A−11 16. Example 17−12 Appendix C. A Sed and Awk Micro−Primer 476 Advanced Bash−Scripting Guide For a more extensive treatment of sed, check the appropriate references in the Bibliography. C.2. Awk Awk is a full−featured text processing language with a syntax reminiscent of C. While it possesses an extensive set of operators and capabilities, we will cover only a couple of these here − the ones most useful for shell scripting. Awk breaks each line of input passed to it into fields. By default, a field is a string of consecutive characters separated by whitespace, though there are options for changing the delimiter. Awk parses and operates on each separate field. This makes awk ideal for handling structured text files −− especially tables −− data organized into consistent chunks, such as rows and columns. Strong quoting (single quotes) and curly brackets enclose segments of awk code within a shell script. awk '{print $3}' $filename # Prints field #3 of file $filename to stdout. awk '{print $1 $5 $6}' $filename # Prints fields #1, #5, and #6 of file $filename. We have just seen the awk print command in action. The only other feature of awk we need to deal with here is variables. Awk handles variables similarly to shell scripts, though a bit more flexibly. { total += ${column_number} } This adds the value of column_number to the running total of "total". Finally, to print "total", there is an END command block, executed after the script has processed all its input. END { print total } Corresponding to the END, there is a BEGIN, for a code block to be performed before awk starts processing its input. The following example illustrates how awk can add text−parsing tools to a shell script. Example C−1. Counting Letter Occurrences #! /bin/sh # letter−count.sh: Counting letter occurrences in a text file. # # Script by nyal (nyal@voila.fr). # Used with permission. # Recommented by document author. INIT_TAB_AWK="" # Parameter to initialize awk script. count_case=0 FILE_PARSE=$1 E_PARAMERR=65 Appendix C. A Sed and Awk Micro−Primer 477 Advanced Bash−Scripting Guide usage() { echo "Usage: letter−count.sh file letters" 2>&1 # For example: ./letter−count.sh filename.txt a b c exit $E_PARAMERR # Not enough arguments passed to script. } if [ ! −f "$1" ] ; then echo "$1: No such file." 2>&1 usage # Print usage message and exit. fi if [ −z "$2" ] ; then echo "$2: No letters specified." 2>&1 usage fi shift # Letters specified. for letter in `echo $@` # For each one . . . do INIT_TAB_AWK="$INIT_TAB_AWK tab_search[${count_case}] = \"$letter\"; final_tab[${count_case}] = # Pass as parameter to awk script below. count_case=`expr $count_case + 1` done # DEBUG: # echo $INIT_TAB_AWK; cat $FILE_PARSE | # Pipe the target file to the following awk script. # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− awk −v tab_search=0 −v final_tab=0 −v tab=0 −v nb_letter=0 −v chara=0 −v chara2=0 \ "BEGIN { $INIT_TAB_AWK } \ { split(\$0, tab, \"\"); \ for (chara in tab) \ { for (chara2 in tab_search) \ { if (tab_search[chara2] == tab[chara]) { final_tab[chara2]++ } } } } \ END { for (chara in final_tab) \ { print tab_search[chara] \" => \" final_tab[chara] } }" # −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Nothing all that complicated, just . . . #+ for−loops, if−tests, and a couple of specialized functions. exit $? For simpler examples of awk within shell scripts, see: 1. Example 11−11 2. Example 16−7 3. Example 12−27 4. Example 34−3 5. Example 9−22 6. Example 11−17 7. Example 28−2 8. Example 28−3 9. Example 10−3 10. Example 12−48 Appendix C. A Sed and Awk Micro−Primer 478 Advanced Bash−Scripting Guide 11. Example 9−27 12. Example 12−4 13. Example 9−12 14. Example 34−12 15. Example 10−8 That's all the awk we'll cover here, folks, but there's lots more to learn. See the appropriate references in the Bibliography. Appendix C. A Sed and Awk Micro−Primer 479 Appendix D. Exit Codes With Special Meanings Table D−1. "Reserved" Exit Codes Exit Code Number 1 2 126 127 128 128+n 130 255* Meaning catchall for general errors Example Comments let "var1 = 1/0" miscellaneous errors, such as "divide by zero" misuse of shell builtins, according to Seldom seen, usually defaults to exit Bash documentation code 1 command invoked cannot execute permission problem or command is not an executable "command not found" possible problem with $PATH or a typo invalid argument to exit exit 3.14159 exit takes only integer args in the range 0 − 255 fatal error signal "n" kill −9 $PPID $? returns 137 (128 + 9) of script script terminated by Control−C Control−C is fatal error signal 2, (130 = 128 + 2, see above) exit status out of range exit −1 exit takes only integer args in the range 0 − 255 According to the table, exit codes 1 − 2, 126 − 165, and 255 [70] have special meanings, and should therefore be avoided as user−specified exit parameters. Ending a script with exit 127 would certainly cause confusion when troubleshooting (is the error a "command not found" or a user−defined one?). However, many scripts use an exit 1 as a general bailout upon error. Since exit code 1 signifies so many possible errors, this might not add any additional ambiguity, but, on the other hand, it probably would not be very informative either. There has been an attempt to systematize exit status numbers (see /usr/include/sysexits.h), but this is intended for C and C++ programmers. A similar standard for scripting might be appropriate. The author of this document proposes restricting user−defined exit codes to the range 64 − 113 (in addition to 0, for success), to conform with the C/C++ standard. This would allot 50 valid codes, and make troubleshooting scripts more straightforward. All user−defined exit codes in the accompanying examples to this document now conform to this standard, except where overriding circumstances exist, as in Example 9−2. Issuing a $? from the command line after a shell script exits gives results consistent with the table above only from the Bash or sh prompt. Running the C−shell or tcsh may give different values in some cases. Appendix D. Exit Codes With Special Meanings 480 Appendix E. A Detailed Introduction to I/O and I/O Redirection written by Stephane Chazelas, and revised by the document author A command expects the first three file descriptors to be available. The first, fd 0 (standard input, stdin), is for reading. The other two (fd 1, stdout and fd 2, stderr) are for writing. There is a stdin, stdout, and a stderr associated with each command. ls 2>&1 means temporarily connecting the stderr of the ls command to the same "resource" as the shell's stdout. By convention, a command reads its input from fd 0 (stdin), prints normal output to fd 1 (stdout), and error ouput to fd 2 (stderr). If one of those three fd's is not open, you may encounter problems: bash$ cat /etc/passwd >&− cat: standard output: Bad file descriptor For example, when xterm runs, it first initializes itself. Before running the user's shell, xterm opens the terminal device (/dev/pts/ or something similar) three times. At this point, Bash inherits these three file descriptors, and each command (child process) run by Bash inherits them in turn, except when you redirect the command. Redirection means reassigning one of the file descriptors to another file (or a pipe, or anything permissible). File descriptors may be reassigned locally (for a command, a command group, a subshell, a while or if or case or for loop...), or globally, for the remainder of the shell (using exec). ls > /dev/null means running ls with its fd 1 connected to /dev/null. bash$ lsof −a −p $$ −d0,1,2 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME bash 363 bozo 0u CHR 136,1 3 /dev/pts/1 bash 363 bozo 1u CHR 136,1 3 /dev/pts/1 bash 363 bozo 2u CHR 136,1 3 /dev/pts/1 bash$ exec 2> /dev/null bash$ lsof −a −p $$ −d0,1,2 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME bash 371 bozo 0u CHR 136,1 3 /dev/pts/1 bash 371 bozo 1u CHR 136,1 3 /dev/pts/1 bash 371 bozo 2w CHR 1,3 120 /dev/null bash$ bash −c 'lsof −a −p $$ −d0,1,2' | cat COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME lsof 379 root 0u CHR 136,1 3 /dev/pts/1 lsof 379 root 1w FIFO 0,0 7118 pipe lsof 379 root 2u CHR 136,1 3 /dev/pts/1 bash$ echo "$(bash −c 'lsof −a −p $$ −d0,1,2' 2>&1)" COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME lsof 426 root 0u CHR 136,1 3 /dev/pts/1 Appendix E. A Detailed Introduction to I/O and I/O Redirection 481 Advanced Bash−Scripting Guide lsof lsof 426 root 426 root 1w 2w FIFO FIFO 0,0 0,0 7520 pipe 7520 pipe This works for different types of redirection. Exercise: Analyze the following script. #! /usr/bin/env bash mkfifo /tmp/fifo1 /tmp/fifo2 while read a; do echo "FIFO1: $a"; done < /tmp/fifo1 & exec 7> /tmp/fifo1 exec 8> >(while read a; do echo "FD8: $a, to fd7"; done >&7) exec 3>&1 ( ( ( while read a; do echo "FIFO2: $a"; done < /tmp/fifo2 | tee /dev/stderr | tee /dev/fd/4 | tee / exec 3> /tmp/fifo2 echo 1st, sleep 1 echo 2nd, sleep 1 echo 3rd, sleep 1 echo 4th, sleep 1 echo 5th, sleep 1 echo 6th, sleep 1 echo 7th, sleep 1 echo 8th, sleep 1 echo 9th, to stdout to stderr >&2 to fd 3 >&3 to fd 4 >&4 to fd 5 >&5 through a pipe | sed 's/.*/PIPE: &, to fd 5/' >&5 to fd 6 >&6 to fd 7 >&7 to fd 8 >&8 ) 4>&1 >&3 3>&− | while read a; do echo "FD4: $a"; done 1>&3 5>&− 6>&− ) 5>&1 >&3 | while read a; do echo "FD5: $a"; done 1>&3 6>&− ) 6>&1 >&3 | while read a; do echo "FD6: $a"; done 3>&− rm −f /tmp/fifo1 /tmp/fifo2 # For each command and subshell, figure out which fd points to what. exit 0 Appendix E. A Detailed Introduction to I/O and I/O Redirection 482 Appendix F. Standard Command−Line Options Over time, there has evolved a loose standard for the meanings of command line option flags. The GNU utilities conform more closely to this "standard" than older Unix utilities. Traditionally, Unix command−line options consist of a dash, followed by one or more lowercase letters. The GNU utilities added a double−dash, followed by a complete word or compound word. The two most widely−accepted options are: • −h −−help Help: Give usage message and exit. • −v −−version Version: Show program version and exit. Other common options are: • −a −−all All: show all information or operate on all arguments. • −l −−list List: list files or arguments without taking other action. • −o Output filename • −q −−quiet Quiet: suppress stdout. • −r −R −−recursive Recursive: Operate recursively (down directory tree). • −v Appendix F. Standard Command−Line Options 483 Advanced Bash−Scripting Guide −−verbose Verbose: output additional information to stdout or stderr. • −z −−compress Compress: apply compression (usually gzip). However: • In tar and gawk: −f −−file File: filename follows. • In cp, mv, rm: −f −−force Force: force overwrite of target file(s). Many Unix and Linux utilities deviate from this "standard," so it is dangerous to assume that a given option will behave in a standard way. Always check the man page for the command in question when in doubt. A complete table of recommended options for the GNU utilities is available at http://www.gnu.org/prep/standards_19.html. Appendix F. Standard Command−Line Options 484 Appendix G. Important System Directories Sysadmins and anyone else writing administrative scripts should be intimately familiar with the following system directories. • /bin Binary executables. Basic system programs and utilities (such as bash). • /usr/bin [71] More system executables. • /usr/local/bin Miscellaneous executables. • /sbin Superuser binaries. Basic system administrative programs and utilities (such as fsck). • /usr/sbin More superuser binaries. • /etc Et cetera. Systemwide configuration scripts. • /etc/rc.d Boot scripts, on Red Hat and derivative distributions of Linux. • /usr/share/doc Documentation for installed packages. • /tmp System temporary files. • /var/log Systemwide log files. • /var/spool/mail User mail spool. Appendix G. Important System Directories 485 Appendix H. Localization Localization is an undocumented Bash feature. A localized shell script echoes its text output in the language defined as the system's locale. A Linux user in Berlin, Germany, would get script output in German, whereas his cousin in Berlin, Maryland, would get output from the same script in English. To create a localized script, use the following template to write all messages to the user (error messages, prompts, etc.). #!/bin/bash # localized.sh # Script by Stephane Chazelas, modified by Bruno Haible . gettext.sh E_CDERROR=65 error() { printf "$@" >&2 exit $E_CDERROR } cd $var || error "`eval_gettext \"Can't cd to \$var.\"`" read −p "`gettext \"Enter the value: \"`" var # ... bash$ bash −D localized.sh "Can't cd to %s." "Enter the value: " This lists all the localized text. (The −D option lists double−quoted strings prefixed by a $, without executing the script.) bash$ bash −−dump−po−strings localized.sh #: a:6 msgid "Can't cd to %s." msgstr "" #: a:7 msgid "Enter the value: " msgstr "" The −−dump−po−strings option to Bash resembles the −D option, but uses gettext "po" format. Bruno Haible points out: Starting with gettext−0.12.2, xgettext −o − localized.sh is recommended instead of bash −−dump−po−strings localized.sh, because xgettext . . . 1. understands the gettext and eval_gettext commands (whereas bash −−dump−po−strings understands only its deprecated $"..." syntax) Appendix H. Localization 486 Advanced Bash−Scripting Guide 2. can extract comments placed by the programmer, intended to be read by the translator. This shell code is then not specific to Bash any more; it works the same way with Bash 1.x and other /bin/sh implementations. Now, build a language.po file for each language that the script will be translated into, specifying the msgstr. As an example: fr.po: #: a:6 msgid "Can't cd to %s." msgstr "Impossible de se positionner dans le répertoire %s." #: a:7 msgid "Enter the value: " msgstr "Entrez la valeur : " Then, run msgfmt. msgfmt −o localized.sh.mo fr.po Place the resulting localized.sh.mo file in the /usr/local/share/locale/fr/LC_MESSAGES directory, and at the beginning of the script, insert the lines: TEXTDOMAINDIR=/usr/local/share/locale TEXTDOMAIN=localized.sh If a user on a French system runs the script, she will get French messages. With older versions of Bash or other shells, localization requires gettext, using the −s option. In this case, the script becomes: #!/bin/bash # localized.sh E_CDERROR=65 error() { local format=$1 shift printf "$(gettext −s "$format")" "$@" >&2 exit $E_CDERROR } cd $var || error "Can't cd to %s." "$var" read −p "$(gettext −s "Enter the value: ")" var # ... The TEXTDOMAIN and TEXTDOMAINDIR variables need to be exported to the environment. −−− This appendix written by Stephane Chazelas, with modifications suggested by Bruno Haible, maintainer of GNU gettext. Appendix H. Localization 487 Advanced Bash−Scripting Guide Appendix H. Localization 488 Appendix I. History Commands The Bash shell provides command−line tools for editing and manipulating a user's command history. This is primarily a convenience, a means of saving keystrokes. Bash history commands: 1. history 2. fc bash$ history 1 mount /mnt/cdrom 2 cd /mnt/cdrom 3 ls ... Internal variables associated with Bash history commands: 1. $HISTCMD 2. $HISTCONTROL 3. $HISTIGNORE 4. $HISTFILE 5. $HISTFILESIZE 6. $HISTSIZE 7. !! 8. !$ 9. !# 10. !N 11. !−N 12. !STRING 13. !?STRING? 14. ^STRING^string^ Unfortunately, the Bash history tools find no use in scripting. #!/bin/bash # history.sh # Attempt to use 'history' command in a script. history # Script produces no output. # History commands do not work within a script. bash$ ./history.sh (no output) Appendix I. History Commands 489 Appendix J. A Sample .bashrc File The ~/.bashrc file determines the behavior of interactive shells. A good look at this file can lead to a better understanding of Bash. Emmanuel Rouat contributed the following very elaborate .bashrc file, written for a Linux system. He welcomes reader feedback on it. Study the file carefully, and feel free to reuse code snippets and functions from it in your own .bashrc file or even in your scripts. Example J−1. Sample .bashrc file #=============================================================== # # PERSONAL $HOME/.bashrc FILE for bash−2.05a (or later) # # Last modified: Tue Apr 15 20:32:34 CEST 2003 # # This file is read (normally) by interactive shells only. # Here is the place to define your aliases, functions and # other interactive features like your prompt. # # This file was designed (originally) for Solaris but based # on Redhat's default .bashrc file # −−> Modified for Linux. # The majority of the code you'll find here is based on code found # on Usenet (or internet). # This bashrc file is a bit overcrowded − remember it is just # just an example. Tailor it to your needs # # #=============================================================== # −−> Comments added by HOWTO author. # −−> And then edited again by ER :−) #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Source global definitions (if any) #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− if [ −f /etc/bashrc ]; then . /etc/bashrc # −−> Read /etc/bashrc, if present. fi #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Automatic setting of $DISPLAY (if not set already) # This works for linux − your mileage may vary.... # The problem is that different types of terminals give # different answers to 'who am i'...... # I have not found a 'universal' method yet #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− function get_xserver () { case $TERM in xterm ) Appendix J. A Sample .bashrc File 490 Advanced Bash−Scripting Guide XSERVER=$(who am i | awk '{print $NF}' | tr −d ')''(' ) XSERVER=${XSERVER%%:*} ;; aterm | rxvt) # find some code that works here..... ;; esac } if [ −z ${DISPLAY:=""} ]; then get_xserver if [[ −z ${XSERVER} || ${XSERVER} == $(hostname) || ${XSERVER} == "unix" ]]; then DISPLAY=":0.0" # Display on local host else DISPLAY=${XSERVER}:0.0 # Display on remote host fi fi export DISPLAY #−−−−−−−−−−−−−−− # Some settings #−−−−−−−−−−−−−−− ulimit −S −c 0 set −o notify set −o noclobber set −o ignoreeof set −o nounset #set −o xtrace # Enable shopt −s shopt −s shopt −s shopt −s shopt −s shopt −s shopt −s shopt −s shopt −s shopt −s # Don't want any coredumps # useful for debuging options: cdspell cdable_vars checkhash checkwinsize mailwarn sourcepath no_empty_cmd_completion # bash>=2.04 only cmdhist histappend histreedit histverify extglob # necessary for programmable completion # Disable options: shopt −u mailwarn unset MAILCHECK # I don't want my shell to warn me of incoming mail export TIMEFORMAT=$'\nreal %3R\tuser %3U\tsys %3S\tpcpu %P\n' export HISTIGNORE="&:bg:fg:ll:h" export HOSTFILE=$HOME/.hosts # Put a list of remote hosts in ~/.hosts #−−−−−−−−−−−−−−−−−−−−−−− # Greeting, motd etc... #−−−−−−−−−−−−−−−−−−−−−−− # Define some colors first: red='\e[0;31m' RED='\e[1;31m' blue='\e[0;34m' Appendix J. A Sample .bashrc File 491 Advanced Bash−Scripting Guide BLUE='\e[1;34m' cyan='\e[0;36m' CYAN='\e[1;36m' NC='\e[0m' # No Color # −−> Nice. Has the same effect as using "ansi.sys" in DOS. # Looks best on a black background..... echo −e "${CYAN}This is BASH ${RED}${BASH_VERSION%.*}${CYAN} − DISPLAY on ${RED}$DISPLAY${NC}\n" date if [ −x /usr/games/fortune ]; then /usr/games/fortune −s # makes our day a bit more fun.... :−) fi function _exit() # function to run upon exit of shell { echo −e "${RED}Hasta la vista, baby${NC}" } trap _exit EXIT #−−−−−−−−−−−−−−− # Shell Prompt #−−−−−−−−−−−−−−− if [[ "${DISPLAY#$HOST}" != ":0.0" && "${DISPLAY}" != ":0" ]]; then HILIT=${red} # remote machine: prompt will be partly red else HILIT=${cyan} # local machine: prompt will be partly cyan fi # −−> Replace instances of \W with \w in prompt functions below #+ −−> to get display of full path name. function fastprompt() { unset PROMPT_COMMAND case $TERM in *term | rxvt ) PS1="${HILIT}[\h]$NC \W > \[\033]0;\${TERM} [\u@\h] \w\007\]" ;; linux ) PS1="${HILIT}[\h]$NC \W > " ;; *) PS1="[\h] \W > " ;; esac } function powerprompt() { _powerprompt() { LOAD=$(uptime|sed −e "s/.*: \([^,]*\).*/\1/" −e "s/ //g") } PROMPT_COMMAND=_powerprompt case $TERM in *term | rxvt ) PS1="${HILIT}[\A \$LOAD]$NC\n[\h \#] \W > \[\033]0;\${TERM} [\u@\h] \w\007\]" ;; linux ) PS1="${HILIT}[\A − \$LOAD]$NC\n[\h \#] \w > " ;; *) PS1="[\A − \$LOAD]\n[\h \#] \w > " ;; esac } Appendix J. A Sample .bashrc File 492 Advanced Bash−Scripting Guide powerprompt # this is the default prompt − might be slow # If too slow, use fastprompt instead.... #=============================================================== # # ALIASES AND FUNCTIONS # # Arguably, some functions defined here are quite big # (ie 'lowercase') but my workstation has 512Meg of RAM, so ..... # If you want to make this file smaller, these functions can # be converted into scripts. # # Many functions were taken (almost) straight from the bash−2.04 # examples. # #=============================================================== #−−−−−−−−−−−−−−−−−−− # Personnal Aliases #−−−−−−−−−−−−−−−−−−− alias rm='rm −i' alias cp='cp −i' alias mv='mv −i' # −> Prevents accidentally clobbering files. alias mkdir='mkdir −p' alias alias alias alias alias alias alias alias alias alias alias # The alias alias alias alias alias alias alias alias alias alias h='history' j='jobs −l' r='rlogin' which='type −all' ..='cd ..' path='echo −e ${PATH//:/\\n}' print='/usr/bin/lp −o nobanner −d $LPDEST' pjet='enscript −h −G −fCourier9 −d $LPDEST' background='xv −root −quit −max −rmode 5' du='du −kh' df='df −kTh' 'ls' family (this assumes la='ls −Al' ls='ls −hF −−color' lx='ls −lXB' lk='ls −lSr' lc='ls −lcr' lu='ls −lur' lr='ls −lR' lt='ls −ltr' lm='ls −al |more' tree='tree −Csu' # Assumes LPDEST is defined # Pretty−print using enscript # Put a picture in the background you use the GNU ls) # show hidden files # add colors for filetype recognition # sort by extension # sort by size # sort by change time # sort by access time # recursive ls # sort by date # pipe through 'more' # nice alternative to 'ls' # tailoring 'less' alias more='less' export PAGER=less export LESSCHARSET='latin1' export LESSOPEN='|/usr/bin/lesspipe.sh %s 2>&−' # Use this if lesspipe.sh exists export LESS='−i −N −w −z−4 −g −e −M −X −F −R −P%t?f%f \ :stdin .?pb%pb\%:?lbLine %lb:?bbByte %bb:−...' # spelling typos − highly personnal :−) alias xs='cd' Appendix J. A Sample .bashrc File 493 Advanced Bash−Scripting Guide alias alias alias alias vf='cd' moer='more' moew='more' kk='ll' #−−−−−−−−−−−−−−−− # a few fun ones #−−−−−−−−−−−−−−−− function xtitle () { case "$TERM" in *term | rxvt) echo −n −e "\033]0;$*\007" ;; *) ;; esac } # aliases... alias top='xtitle Processes on $HOST && top' alias make='xtitle Making $(basename $PWD) ; make' alias ncftp="xtitle ncFTP ; ncftp" # .. and functions function man () { for i ; do xtitle The $(basename $1|tr −d .[:digit:]) manual command man −F −a "$i" done } function ll(){ ls −l "$@"| egrep "^d" ; ls −lXB "$@" 2>&−| egrep −v "^d|total "; } function te() # wrapper around xemacs/gnuserv { if [ "$(gnuclient −batch −eval t 2>&−)" == "t" ]; then gnuclient −q "$@"; else ( xemacs "$@" &); fi } #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # File & strings related functions: #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Find a file with a pattern in name: function ff() { find . −type f −iname '*'$*'*' −ls ; } # Find a file with pattern $1 in name and Execute $2 on it: function fe() { find . −type f −iname '*'$1'*' −exec "${2:−file}" {} \; # find pattern in a set of filesand highlight them: function fstr() { OPTIND=1 local case="" local usage="fstr: find string in files. Usage: fstr [−i] \"pattern\" [\"filename pattern\"] " while getopts :it opt do case "$opt" in i) case="−i " ;; ;} Appendix J. A Sample .bashrc File 494 Advanced Bash−Scripting Guide *) echo "$usage"; return;; esac done shift $(( $OPTIND − 1 )) if [ "$#" −lt 1 ]; then echo "$usage" return; fi local SMSO=$(tput smso) local RMSO=$(tput rmso) find . −type f −name "${2:−*}" −print0 | xargs −0 grep −sn ${case} "$1" 2>&− | \ sed "s/$1/${SMSO}\0${RMSO}/gI" | more } function cuttail() # cut last n lines in file, 10 by default { nlines=${2:−10} sed −n −e :a −e "1,${nlines}!{P;N;D;};N;ba" $1 } function lowercase() # move filenames to lowercase { for file ; do filename=${file##*/} case "$filename" in */*) dirname==${file%/*} ;; *) dirname=.;; esac nf=$(echo $filename | tr A−Z a−z) newname="${dirname}/${nf}" if [ "$nf" != "$filename" ]; then mv "$file" "$newname" echo "lowercase: $file −−> $newname" else echo "lowercase: $file not changed." fi done } function swap() # swap 2 filenames around { local TMPFILE=tmp.$$ mv "$1" $TMPFILE mv "$2" "$1" mv $TMPFILE "$2" } #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− # Process/system related functions: #−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− function my_ps() { ps $@ −u $USER −o pid,%cpu,%mem,bsdtime,command ; } function pp() { my_ps f | awk '!/awk/ && $0~var' var=${1:−".*"} ; } # This function is roughly the same as 'killall' on linux # but has no equivalent (that I know of) on Solaris function killps() # kill by process name { local pid pname sig="−TERM" # default signal if [ "$#" −lt 1 ] || [ "$#" −gt 2 ]; then echo "Usage: killps [−SIGNAL] pattern" Appendix J. A Sample .bashrc File 495 Advanced Bash−Scripting Guide return; fi if [ $# = 2 ]; then sig=$1 ; fi for pid in $(my_ps| awk '!/awk/ && $0~pat { print $1 }' pat=${!#} ) ; do pname=$(my_ps | awk '$1~var { print $5 }' var=$pid ) if ask "Kill process $pid <$pname> with signal $sig?" then kill $sig $pid fi done } function my_ip() # get IP adresses { MY_IP=$(/sbin/ifconfig ppp0 | awk '/inet/ { print $2 } ' | sed −e s/addr://) MY_ISP=$(/sbin/ifconfig ppp0 | awk '/P−t−P/ { print $3 } ' | sed −e s/P−t−P://) } function ii() # get current host related info { echo −e "\nYou are logged on ${RED}$HOST" echo −e "\nAdditionnal information:$NC " ; uname −a echo −e "\n${RED}Users logged on:$NC " ; w −h echo −e "\n${RED}Current date :$NC " ; date echo −e "\n${RED}Machine stats :$NC " ; uptime echo −e "\n${RED}Memory stats :$NC " ; free my_ip 2>&− ; echo −e "\n${RED}Local IP Address :$NC" ; echo ${MY_IP:−"Not connected"} echo −e "\n${RED}ISP Address :$NC" ; echo ${MY_ISP:−"Not connected"} echo } # Misc utilities: function repeat() # repeat n times command { local i max max=$1; shift; for ((i=1; i <= max ; i++)); do # −−> C−like syntax eval "$@"; done } function ask() { echo −n "$@" '[y/n] ' ; read ans case "$ans" in y*|Y*) return 0 ;; *) return 1 ;; esac } #========================================================================= # # PROGRAMMABLE COMPLETION − ONLY SINCE BASH−2.04 # Most are taken from the bash 2.05 documentation and from Ian McDonalds # 'Bash completion' package (http://www.caliban.org/bash/index.shtml#completion) # You will in fact need bash−2.05a for some features # #========================================================================= if [ "${BASH_VERSION%.*}" \< "2.05" ]; then echo "You will need to upgrade to version 2.05 for programmable completion" Appendix J. A Sample .bashrc File 496 Advanced Bash−Scripting Guide return fi shopt −s extglob set +o nounset complete complete complete complete complete complete complete complete complete complete complete −A −A −A −A −A −A −A −A −A −A −A hostname export variable enabled alias function user # necessary # otherwise some completions will fail rsh rcp telnet rlogin r ftp ping disk printenv export local readonly unset builtin alias unalias function su mail finger helptopic help # currently same as builtins shopt shopt stopped −P '%' bg job −P '%' fg jobs disown mkdir rmdir −o default cd complete −A directory complete −A directory # Compression complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X # Postscript,pdf,dvi..... complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X complete −f −o default −X # Multimedia complete −f −o default −X complete −f −o default −X complete −f −o default −X '*.+(zip|ZIP)' '!*.+(zip|ZIP)' '*.+(z|Z)' '!*.+(z|Z)' '*.+(gz|GZ)' '!*.+(gz|GZ)' '*.+(bz2|BZ2)' '!*.+(bz2|BZ2)' zip unzip compress uncompress gzip gunzip bzip2 bunzip2 '!*.ps' gs ghostview ps2pdf ps2ascii '!*.dvi' dvips dvipdf xdvi dviselect dvitype '!*.pdf' acroread pdf2ps '!*.+(pdf|ps)' gv '!*.texi*' makeinfo texi2dvi texi2html texi2pdf '!*.tex' tex latex slitex '!*.lyx' lyx '!*.+(htm*|HTM*)' lynx html2ps '!*.+(jp*g|gif|xpm|png|bmp)' xv gimp '!*.+(mp3|MP3)' mpg123 mpg321 '!*.+(ogg|OGG)' ogg123 complete −f −o default −X '!*.pl' perl perl5 # This is a 'universal' completion function − it works when commands have # a so−called 'long options' mode , ie: 'ls −−all' instead of 'ls −a' _get_longopts () { $1 −−help | sed −e '/−−/!d' −e 's/.*−−\([^[:space:].,]*\).*/−−\1/'| \ grep ^"$2" |sort −u ; } _longopts_func () { case "${2:−*}" in −*) ;; Appendix J. A Sample .bashrc File 497 Advanced Bash−Scripting Guide *) esac return ;; case "$1" in \~*) eval cmd="$1" ;; *) cmd="$1" ;; esac COMPREPLY=( $(_get_longopts ${1} ${2} ) ) } complete complete −o default −F _longopts_func configure bash −o default −F _longopts_func wget id info a2ps ls recode _make_targets () { local mdef makef gcmd cur prev i COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD−1]} # if prev argument is −f, return possible filename completions. # we could be a little smarter here and return matches against # `makefile Makefile *.mk', whatever exists case "$prev" in −*f) COMPREPLY=( $(compgen −f $cur ) ); return 0;; esac # if we want an option, return the possible posix options case "$cur" in −) COMPREPLY=(−e −f −i −k −n −p −q −r −S −s −t); return 0;; esac # make reads `makefile' before `Makefile' if [ −f makefile ]; then mdef=makefile elif [ −f Makefile ]; then mdef=Makefile else mdef=*.mk # local convention fi # before we scan for targets, see if a makefile name was specified # with −f for (( i=0; i < ${#COMP_WORDS[@]}; i++ )); do if [[ ${COMP_WORDS[i]} == −*f ]]; then eval makef=${COMP_WORDS[i+1]} # eval for tilde expansion break fi done [ −z "$makef" ] && makef=$mdef # if we have a partial word to complete, restrict completions to # matches of that word if [ −n "$2" ]; then gcmd='grep "^$2"' ; else gcmd=cat ; fi # if we don't want to use *.mk, we can take out the cat and use # test −f $makef and input redirection COMPREPLY=( $(cat $makef 2>/dev/null | awk 'BEGIN {FS=":"} /^[^.# } ][^=]*:/ {print $1}' | tr Appendix J. A Sample .bashrc File 498 Advanced Bash−Scripting Guide complete −F _make_targets −X '+($*|*.[cho])' make gmake pmake # cvs(1) completion _cvs () { local cur prev COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} prev=${COMP_WORDS[COMP_CWORD−1]} if [ $COMP_CWORD −eq 1 ] || [ COMPREPLY=( $( compgen −W export history import log tag update' $cur )) else COMPREPLY=( $( compgen −f fi return 0 } complete −F _cvs cvs _killall () { local cur prev COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} # get a list of processes (the first sed evaluation # takes care of swapped out processes, the second # takes care of getting the basename of the process) COMPREPLY=( $( /usr/bin/ps −u $USER −o comm | \ sed −e '1,1d' −e 's#[]\[]##g' −e 's#^.*/##'| \ awk '{if ($0 ~ /^'$cur'/) print $0}' )) return 0 } complete −F _killall killall killps "${prev:0:1}" = "−" ]; then 'add admin checkout commit diff \ rdiff release remove rtag status \ $cur )) # # # # A meta−command completion function for commands like sudo(8), which need to first complete on a command, then complete according to that command's own completion definition − currently not quite foolproof (e.g. mount and umount don't work properly), but still quite useful − By Ian McDonald, modified by me. _my_command() { local cur func cline cspec COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} if [ $COMP_CWORD = 1 ]; then COMPREPLY=( $( compgen −c $cur ) ) elif complete −p ${COMP_WORDS[1]} &>/dev/null; then cspec=$( complete −p ${COMP_WORDS[1]} ) if [ "${cspec%%−F *}" != "${cspec}" ]; then # complete −F # # COMP_CWORD and COMP_WORDS() are not read−only, # so we can set them before handing off to regular Appendix J. A Sample .bashrc File 499 Advanced Bash−Scripting Guide # completion routine # set current token number to 1 less than now COMP_CWORD=$(( $COMP_CWORD − 1 )) # get function name func=${cspec#*−F } func=${func%% *} # get current command line minus initial command cline="${COMP_LINE#$1 }" # split current command line tokens into array COMP_WORDS=( $cline ) $func $cline elif [ "${cspec#*−[abcdefgjkvu]}" != "" ]; then # complete −[abcdefgjkvu] #func=$( echo $cspec | sed −e 's/^.*\(−[abcdefgjkvu]\).*$/\1/' ) func=$( echo $cspec | sed −e 's/^complete//' −e 's/[^ ]*$//' ) COMPREPLY=( $( eval compgen $func $cur ) ) elif [ "${cspec#*−A}" != "$cspec" ]; then # complete −A func=${cspec#*−A } func=${func%% *} COMPREPLY=( $( compgen −A $func $cur ) ) fi else COMPREPLY=( $( compgen −f $cur ) ) fi } complete −o default −F _my_command nohup exec eval trace truss strace sotruss gdb complete −o default −F _my_command command type which man nice # # # # Local Variables: mode:shell−script sh−shell:bash End: Appendix J. A Sample .bashrc File 500 Appendix K. Converting DOS Batch Files to Shell Scripts Quite a number of programmers learned scripting on a PC running DOS. Even the crippled DOS batch file language allowed writing some fairly powerful scripts and applications, though they often required extensive kludges and workarounds. Occasionally, the need still arises to convert an old DOS batch file to a Unix shell script. This is generally not difficult, as DOS batch file operators are only a limited subset of the equivalent shell scripting ones. Table K−1. Batch file keywords / variables / operators, and their shell equivalents Batch File Operator Shell Script Equivalent % $ / − \ / == = !==! != | | @ set +v * * > > >> >> < < %VAR% $VAR REM # NOT ! NUL /dev/null ECHO echo ECHO. echo ECHO OFF set +v FOR %%VAR IN (LIST) DO for var in [list]; do :LABEL none (unnecessary) GOTO none (use a function) PAUSE sleep CHOICE case or select IF if IF EXIST FILENAME if [ −e filename ] IF !%N==! if [ −z "$N" ] CALL source or . (dot operator) COMMAND /C source or . (dot operator) SET export Meaning command−line parameter prefix command option flag directory path separator (equal−to) string comparison test (not equal−to) string comparison test pipe do not echo current command filename "wild card" file redirection (overwrite) file redirection (append) redirect stdin environmental variable comment negate following test "black hole" for burying command output echo (many more option in Bash) echo blank line do not echo command(s) following "for" loop label jump to another location in the script pause or wait an interval menu choice if−test test if file exists if replaceable parameter "N" not present "include" another script "include" another script (same as CALL) set an environmental variable 501 Appendix K. Converting DOS Batch Files to Shell Scripts Advanced Bash−Scripting Guide SHIFT SGN ERRORLEVEL CON PRN LPT1 COM1 shift −lt or −gt $? stdin /dev/lp0 /dev/lp0 /dev/ttyS0 left shift command−line argument list sign (of integer) exit status "console" (stdin) (generic) printer device first printer device first serial port Batch files usually contain DOS commands. These must be translated into their Unix equivalents in order to convert a batch file into a shell script. Table K−2. DOS commands and their Unix equivalents DOS Command ASSIGN ATTRIB CD CHDIR CLS COMP COPY Ctl−C Ctl−Z DEL DELTREE DIR ERASE EXIT FC FIND MD MKDIR MORE MOVE PATH REN RENAME RD RMDIR SORT TIME TYPE Unix Equivalent ln chmod cd cd clear diff, comm, cmp cp Ctl−C Ctl−D rm rm −rf ls −l rm exit comm, cmp grep mkdir mkdir more mv $PATH mv mv rmdir rmdir sort date cat Effect link file or directory change file permissions change directory change directory clear screen file compare file copy break (signal) EOF (end−of−file) delete file(s) delete directory recursively directory listing delete file(s) exit current process file compare find strings in files make directory make directory text file paging filter move path to executables rename (move) rename (move) remove directory remove directory sort file display system time output file to stdout 502 Appendix K. Converting DOS Batch Files to Shell Scripts Advanced Bash−Scripting Guide XCOPY cp (extended) file copy Virtually all Unix and shell operators and commands have many more options and enhancements than their DOS and batch file equivalents. Many DOS batch files rely on auxiliary utilities, such as ask.com, a crippled counterpart to read. DOS supports a very limited and incompatible subset of filename wildcard expansion, recognizing only the * and ? characters. Converting a DOS batch file into a shell script is generally straightforward, and the result ofttimes reads better than the original. Example K−1. VIEWDATA.BAT: DOS Batch File REM VIEWDATA REM INSPIRED BY AN EXAMPLE IN "DOS POWERTOOLS" REM BY PAUL SOMERSON @ECHO OFF IF !%1==! GOTO VIEWDATA REM IF NO COMMAND−LINE ARG... FIND "%1" C:\BOZO\BOOKLIST.TXT GOTO EXIT0 REM PRINT LINE WITH STRING MATCH, THEN EXIT. :VIEWDATA TYPE C:\BOZO\BOOKLIST.TXT | MORE REM SHOW ENTIRE FILE, 1 PAGE AT A TIME. :EXIT0 The script conversion is somewhat of an improvement. Example K−2. viewdata.sh: Shell Script Conversion of VIEWDATA.BAT #!/bin/bash # Conversion of VIEWDATA.BAT to shell script. DATAFILE=/home/bozo/datafiles/book−collection.data ARGNO=1 # @ECHO OFF Command unnecessary here. # IF !%1==! GOTO VIEWDATA # TYPE C:\MYDIR\BOOKLIST.TXT | MORE # FIND "%1" C:\MYDIR\BOOKLIST.TXT if [ $# −lt "$ARGNO" ] then less $DATAFILE else grep "$1" $DATAFILE fi exit 0 # :EXIT0 Appendix K. Converting DOS Batch Files to Shell Scripts 503 Advanced Bash−Scripting Guide # GOTOs, labels, smoke−and−mirrors, and flimflam unnecessary. # The converted script is short, sweet, and clean, # which is more than can be said for the original. Ted Davis' Shell Scripts on the PC site has a set of comprehensive tutorials on the old−fashioned art of batch file programming. Certain of his ingenious techniques could conceivably have relevance for shell scripts. Appendix K. Converting DOS Batch Files to Shell Scripts 504 Appendix L. Exercises L.1. Analyzing Scripts Examine the following script. Run it, then explain what it does. Annotate the script and rewrite it in a more compact and elegant manner. #!/bin/bash MAX=10000 for((nr=1; nr<$MAX; nr++)) do let "t1 = nr % 5" if [ "$t1" −ne 3 ] then continue fi let "t2 = nr % 7" if [ "$t2" −ne 4 ] then continue fi let "t3 = nr % 9" if [ "$t3" −ne 5 ] then continue fi break done echo "Number = $nr" # What happens when you comment out this line? Why? exit 0 −−− A reader sent in the following code snippet. while read LINE do echo $LINE done < `tail −f /var/log/messages` He wished to write a script tracking changes to the system log file, /var/log/messages. Unfortunately, the above code block hangs and does nothing useful. Why? Fix this so it does work. (Hint: rather than redirecting the stdin of the loop, try a pipe.) −−− Appendix L. Exercises 505 Advanced Bash−Scripting Guide Analyze Example A−11, and reorganize it in a simplified and more logical style. See how many of the variables can be eliminated, and try to optimize the script to speed up its execution time. Alter the script so that it accepts any ordinary ASCII text file as input for its initial "generation". The script will read the first $ROW*$COL characters, and set the occurrences of vowels as "living" cells. Hint: be sure to translate the spaces in the input file to underscore characters. L.2. Writing Scripts Write a script to carry out each of the following tasks. Easy Home Directory Listing Perform a recursive directory listing on the user's home directory and save the information to a file. Compress the file, have the script prompt the user to insert a floppy, then press ENTER. Finally, save the file to the floppy. Converting for loops to while and until loops Convert the for loops in Example 10−1 to while loops. Hint: store the data in an array and step through the array elements. Having already done the "heavy lifting", now convert the loops in the example to until loops. Changing the line spacing of a text file Write a script that reads each line of a target file, then writes the line back to stdout, but with an extra blank line following. This has the effect of double−spacing the file. Include all necessary code to check whether the script gets the necessary command line argument (a filename), and whether the specified file exists. When the script runs correctly, modify it to triple−space the target file. Finally, write a script to remove all blank lines from the target file, single−spacing it. Backwards Listing Write a script that echoes itself to stdout, but backwards. Automatically Decompressing Files Given a list of filenames as input, this script queries each target file (parsing the output of the file command) for the type of compression used on it. Then the script automatically invokes the appropriate decompression command (gunzip, bunzip2, unzip, uncompress, or whatever). If a target file is not compressed, the script emits a warning message, but takes no other action on that particular file. Unique System ID Generate a "unique" 6−digit hexadecimal identifier for your computer. Do not use the flawed hostid command. Hint: md5sum /etc/passwd, then select the first 6 digits of output. Backup Archive as a "tarball" (*.tar.gz file) all the files in your home directory tree (/home/your−name) that have been modified in the last 24 hours. Hint: use find. Primes Print (to stdout) all prime numbers between 60000 and 63000. The output should be nicely formatted in columns (hint: use printf). Appendix L. Exercises 506 Advanced Bash−Scripting Guide Lottery Numbers One type of lottery involves picking five different numbers, in the range of 1 − 50. Write a script that generates five pseudorandom numbers in this range, with no duplicates. The script will give the option of echoing the numbers to stdout or saving them to a file, along with the date and time the particular number set was generated. Intermediate Managing Disk Space List, one at a time, all files larger than 100K in the /home/username directory tree. Give the user the option to delete or compress the file, then proceed to show the next one. Write to a logfile the names of all deleted files and the deletion times. Safe Delete Write, as a script, a "safe" delete command, srm.sh. Filenames passed as command−line arguments to this script are not deleted, but instead gzipped if not already compressed (use file to check), then moved to a /home/username/trash directory. At invocation, the script checks the "trash" directory for files older than 48 hours and deletes them. Making Change What is the most efficient way to make change for $1.68, using only coins in common circulations (up to 25c)? It's 6 quarters, 1 dime, a nickel, and three cents. Given any arbitrary command line input in dollars and cents ($*.??), calculate the change, using the minimum number of coins. If your home country is not the United States, you may use your local currency units instead. The script will need to parse the command line input, then change it to multiples of the smallest monetary unit (cents or whatever). Hint: look at Example 23−7. Quadratic Equations Solve a "quadratic" equation of the form Ax^2 + Bx + C = 0. Have a script take as arguments the coefficients, A, B, and C, and return the solutions to four decimal places. Hint: pipe the coefficients to bc, using the well−known formula, x = ( −B +/− sqrt( B^2 − 4AC ) ) / 2A. Sum of Matching Numbers Find the sum of all five−digit numbers (in the range 10000 − 99999) containing exactly two out of the following set of digits: { 4, 5, 6 }. These may repeat within the same number, and if so, they count once for each occurrence. Some examples of matching numbers are 42057, 74638, and 89515. Lucky Numbers A "lucky number" is one whose individual digits add up to 7, in successive additions. For example, 62431 is a "lucky number" (6 + 2 + 4 + 3 + 1 = 16, 1 + 6 = 7). Find all the "lucky numbers" between 1000 and 10000. Alphabetizing a String Alphabetize (in ASCII order) an arbitrary string read from the command line. Parsing Parse /etc/passwd, and output its contents in nice, easy−to−read tabular form. Logging Logins Parse /var/log/messages to produce a nicely formatted file of user logins and login times. The script may need to run as root. (Hint: Search for the string "LOGIN.") Pretty−Printing a Data File Certain database and spreadsheet packages use save−files with comma−separated values (CSVs). Other applications often need to parse these files. Appendix L. Exercises 507 Advanced Bash−Scripting Guide Given a data file with comma−separated fields, of the form: Jones,Bill,235 S. Williams St.,Denver,CO,80221,(303) 244−7989 Smith,Tom,404 Polk Ave.,Los Angeles,CA,90003,(213) 879−5612 ... Reformat the data and print it out to stdout in labeled, evenly−spaced columns. Justification Given ASCII text input either from stdin or a file, adjust the word spacing to right−justify each line to a user−specified line−width, then send the output to stdout. Mailing List Using the mail command, write a script that manages a simple mailing list. The script automatically e−mails the monthly company newsletter, read from a specified text file, and sends it to all the addresses on the mailing list, which the script reads from another specified file. Generating Passwords Generate pseudorandom 8−character passwords, using characters in the ranges [0−9], [A−Z], [a−z]. Each password must contain at least two digits. Difficult Testing Passwords Write a script to check and validate passwords. The object is to flag "weak" or easily guessed password candidates. A trial password will be input to the script as a command line parameter. To be considered acceptable, a password must meet the following minimum qualifications: ◊ Minimum length of 8 characters ◊ Must contain at least one numeric character ◊ Must contain at least one of the following non−alphabetic characters: @, #, $, %, &, *, +, −, = Optional: ◊ Do a dictionary check on every sequence of at least four consecutive alphabetic characters in the password under test. This will eliminate passwords containing embedded "words" found in a standard dictionary. ◊ Enable the script to check all the passwords on your system. These may or may not reside in /etc/passwd. This exercise tests mastery of Regular Expressions. Logging File Accesses Log all accesses to the files in /etc during the course of a single day. This information should include the filename, user name, and access time. If any alterations to the files take place, that should be flagged. Write this data as neatly formatted records in a logfile. Monitoring Processes Write a script to continually monitor all running processes and to keep track of how many child processes each parent spawns. If a process spawns more than five children, then the script sends an e−mail to the system administrator (or root) with all relevant information, including the time, PID of the parent, PIDs of the children, etc. The script writes a report to a log file every ten minutes. Strip Comments Strip all comments from a shell script whose name is specified on the command line. Note that the "#! line" must not be stripped out. HTML Conversion Appendix L. Exercises 508 Advanced Bash−Scripting Guide Convert a given text file to HTML. This non−interactive script automatically inserts all appropriate HTML tags into a file specified as an argument. Strip HTML Tags Strip all HTML tags from a specified HTML file, then reformat it into lines between 60 and 75 characters in length. Reset paragraph and block spacing, as appropriate, and convert HTML tables to their approximate text equivalent. XML Conversion Convert an XML file to both HTML and text format. Chasing Spammers Write a script that analyzes a spam e−mail by doing DNS lookups on the IP addresses in the headers to identify the relay hosts as well as the originating ISP. The script will forward the unaltered spam message to the responsible ISPs. Of course, it will be necessary to filter out your own ISP's IP address, so you don't end up complaining about yourself. As necessary, use the appropriate network analysis commands. Morse Code Convert a text file to Morse code. Each character of the text file will be represented as a corresponding Morse code group of dots and dashes (underscores), separated by whitespace from the next. For example, "script" ===> "... _._. ._. .. .__. _". Hex Dump Do a hex(adecimal) dump on a binary file specified as an argument. The output should be in neat tabular fields, with the first field showing the address, each of the next 8 fields a 4−byte hex number, and the final field the ASCII equivalent of the previous 8 fields. Emulating a Shift Register Using Example 26−14 as an inspiration, write a script that emulates a 64−bit shift register as an array. Implement functions to load the register, shift left, and shift right. Finally, write a function that interprets the register contents as eight 8−bit ASCII characters. Determinant Solve a 4 x 4 determinant. Hidden Words Write a "word−find" puzzle generator, a script that hides 10 input words in a 10 x 10 matrix of random letters. The words may be hidden across, down, or diagonally. Optional: Write a script that solves word−find puzzles. To keep this from becoming too difficult, the solution script will find only horizontal and vertical words. (Hint: Treat each row and column as a string, and search for substrings.) Anagramming Anagram 4−letter input. For example, the anagrams of word are: do or rod row word. You may use /usr/share/dict/linux.words as the reference list. "Word Ladders" A "word ladder" is a sequence of words, with each successive word in the sequence differing from the previous one by a single letter. For example, to "ladder" from mark to vase: mark −−> park −−> part −−> past −−> vast −−> vase Write a script that solves "word ladder" puzzles. Given a starting and an ending word, the script will list all intermediate steps in the "ladder". Note that all words in the sequence must be "legal." Fog Index Appendix L. Exercises 509 Advanced Bash−Scripting Guide The "fog index" of a passage of text estimates its reading difficulty, as a number corresponding roughly to a school grade level. For example, a passage with a fog index of 12 should be comprehensible to anyone with 12 years of schooling. The Gunning version of the fog index uses the following algorithm. 1. Choose a section of the text at least 100 words in length. 2. Count the number of sentences (a portion of a sentence truncated by the boundary of the text section counts as one). 3. Find the average number of words per sentence. AVE_WDS_SEN = TOTAL_WORDS / SENTENCES 4. Count the number of "difficult" words in the segment −− those containing at least 3 syllables. Divide this quantity by total words to get the proportion of difficult words. PRO_DIFF_WORDS = LONG_WORDS / TOTAL_WORDS 5. The Gunning fog index is the sum of the above two quantities, multiplied by 0.4, then rounded to the nearest integer. G_FOG_INDEX = int ( 0.4 * ( AVE_WDS_SEN + PRO_DIFF_WORDS ) ) Step 4 is by far the most difficult portion of the exercise. There exist various algorithms for estimating the syllable count of a word. A rule−of−thumb formula might consider the number of letters in a word and the vowel−consonant mix. A strict interpretation of the Gunning Fog index does not count compound words and proper nouns as "difficult" words, but this would enormously complicate the script. Calculating PI using Buffon's Needle The Eighteenth Century French mathematician de Buffon came up with a novel experiment. Repeatedly drop a needle of length "n" onto a wooden floor composed of long and narrow parallel boards. The cracks separating the equal−width floorboards are a fixed distance "d" apart. Keep track of the total drops and the number of times the needle intersects a crack on the floor. The ratio of these two quantities turns out to be a fractional multiple of PI. In the spirit of Example 12−39, write a script that runs a Monte Carlo simulation of Buffon's Needle. To simplify matters, set the needle length equal to the distance between the cracks, n = d. Hint: there are actually two critical variables: the distance from the center of the needle to the crack nearest to it, and the angle of the needle to that crack. You may use bc to handle the calculations. Playfair Cipher Implement the Playfair (Wheatstone) Cipher in a script. The Playfair Cipher encrypts text by substitution of "digrams" (2−letter groupings). It is traditional to use a 5 x 5 letter scrambled−alphabet key square for the encryption and decryption. C A I P V O B K Q W D F L R X E G M T Y S H N U Z Each letter of the alphabet appears once, except "I" also represents "J". The arbitrarily chosen key word, "CODES" comes first, then all Appendix L. Exercises 510 Advanced Bash−Scripting Guide the rest of the alphabet, in order from left to right, skipping letters already used. To encrypt, separate the plaintext message into digrams (2−letter groups). If a group has two identical letters, delete the second, and form a new group. If there is a single letter left over at the end, insert a "null" character, typically an "X". THIS IS A TOP SECRET MESSAGE TH IS IS AT OP SE CR ET ME SA GE For each digram, there are three possibilities. −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− 1) Both letters will be on the same row of the key square For each letter, substitute the one immediately to the right, in that row. If necessary, wrap around left to the beginning of the row. or 2) Both letters will be in the same column of the key square For each letter, substitute the one immediately below it, in that row. If necessary, wrap around to the top of the column. or 3) Both letters will form the corners of a rectangle within the key square. For each letter, substitute the one on the other corner the rectangle which lies on the same row. The "TH" digram falls under case #3. GH MN TU (Rectangle with "T" and "H" at corners) T −−> U H −−> G The "SE" digram falls under case #1. CODES (Row containing "S" and "E") S −−> C E −−> S (wraps around left to beginning of row) ========================================================================= To decrypt encrypted text, reverse the above procedure under cases #1 and #2 (move in opposite direction for substitution). Under case #3, just take the remaining two corners of the rectangle. Helen Fouche Gaines' classic work, "Elementary Cryptanalysis" (1939), gives a fairly detailed rundown on the Playfair Cipher and its solution methods. This script will have three main sections I. Generating the "key square", based on a user−input keyword. II. Encrypting a "plaintext" message. Appendix L. Exercises 511 Advanced Bash−Scripting Guide III. Decrypting encrypted text. The script will make extensive use of arrays and functions. −− Please do not send the author your solutions to these exercises. There are better ways to impress him with your cleverness, such as submitting bugfixes and suggestions for improving this book. Appendix L. Exercises 512 Appendix M. Revision History This document first appeared as a HOWTO in the late spring of 2000. Since then, it has gone through many updates and revisions. This book could not have been written without the assistance of the Linux community, and especially of the Linux Documentation Project. Table M−1. Revision History Release 0.1 0.2 0.3 0.4 0.5 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Date 14 Jun 2000 30 Oct 2000 12 Feb 2001 08 Jul 2001 03 Sep 2001 14 Oct 2001 06 Jan 2002 31 Mar 2002 02 Jun 2002 16 Jun 2002 13 Jul 2002 29 Sep 2002 05 Jan 2003 10 May 2003 21 Jun 2003 24 Aug 2003 14 Sep 2003 31 Oct 2003 03 Jan 2004 25 Jan 2004 15 Feb 2004 15 Mar 2004 Comments Initial release. Bugs fixed, plus much additional material and more example scripts. Major update. Complete revision and expansion of the book. Major update: Bugfixes, material added, sections reorganized. Stable release: Bugfixes, reorganization, material added. Bugfixes, material and scripts added. Bugfixes, material and scripts added. TANGERINE release: A few bugfixes, much more material and scripts added. MANGO release: A number of typos fixed, more material and scripts. PAPAYA release: A few bugfixes, much more material and scripts added. POMEGRANATE release: Bugfixes, more material, one more script. COCONUT release: A couple of bugfixes, more material, one more script. BREADFRUIT release: A number of bugfixes, more scripts and material. PERSIMMON release: Bugfixes, and more material. GOOSEBERRY release: Major update. HUCKLEBERRY release: Bugfixes, and more material. CRANBERRY release: Major update. STRAWBERRY release: Bugfixes and more material. MUSKMELON release: Bugfixes. STARFRUIT release: Bugfixes and more material. SALAL release: Minor update. Appendix M. Revision History 513 Appendix N. Copyright The "Advanced Bash Scripting Guide" is copyright © 2000, by Mendel Cooper. The author also asserts copyright on all previous versions of this document. This blanket copyright recognizes and protects the rights of the contributors to this document. This document may only be distributed subject to the terms and conditions set forth in the Open Publication License (version 1.0 or later), http://www.opencontent.org/openpub/. The following license options also apply. A. Distribution of substantively modified versions of this document is prohibited without the explicit permission of the copyright holder. Distribution of the work or derivative of the work in any standard (paper) book form is prohibited unless prior permission is obtained from the copyright holder. B. Provision A, above, explicitly prohibits relabeling this document. An example of relabeling is the insertion of company logos or navigation bars into the cover, title page, or the text. The author grants the following exemptions. 1. Non−profit organizations, such as the Linux Documentation Project and Sunsite. 2. "Pure−play" Linux distributors, such as Debian, Red Hat, Mandrake, and others. Without explicit written permission from the author, distributors and publishers (including on−line publishers) are prohibited from imposing any additional conditions, strictures, or provisions on this document or any previous version of it. As of this update, the author asserts that he has not entered into any contractual obligations that would alter the foregoing declarations. Essentially, you may freely distribute this book in unaltered electronic form. You must obtain the author's permission to distribute a substantially modified version or derivative work. The purpose of this restriction is to preserve the artistic integrity of this document and to prevent "forking." If you display or distribute this document or any previous version thereof under any license except the one above, then you are required to obtain the author's written permission. Failure to do so may terminate your distribution rights. These are very liberal terms, and they should not hinder any legitimate distribution or use of this book. The author especially encourages the use of this book for classroom and instructional purposes. The commercial print and other rights to this book are available. Please contact the author if interested. The author produced this book in a manner consistent with the spirit of the LDP Manifesto. Linux is a trademark registered to Linus Torvalds. Unix and UNIX are trademarks registered to the Open Group. Appendix N. Copyright 514 Advanced Bash−Scripting Guide MS Windows is a trademark registered to the Microsoft Corp. Pentium is a trademark registered to Intel, Inc. Scrabble is a trademark registered to Hasbro, Inc. All other commercial trademarks mentioned in the body of this work are registered to their respective owners. Hyun Jin Cha has done a Korean translation of version 1.0.11 of this book. Spanish, Portuguese, French, German, Italian, Russian, and Chinese translations are also available or in progress. If you wish to translate this document into another language, please feel free to do so, subject to the terms stated above. The author wishes to be notified of such efforts. Notes [1] [2] [3] [4] [5] These are referred to as builtins, features internal to the shell. Many of the features of ksh88, and even a few from the updated ksh93 have been merged into Bash. By convention, user−written shell scripts that are Bourne shell compliant generally take a name with a .sh extension. System scripts, such as those found in /etc/rc.d, do not follow this guideline. Some flavors of Unix (those based on 4.2BSD) take a four−byte magic number, requiring a blank after the ! −− #! /bin/sh. The #! line in a shell script will be the first thing the command interpreter (sh or bash) sees. Since this line begins with a #, it will be correctly interpreted as a comment when the command interpreter finally executes the script. The line has already served its purpose − calling the command interpreter. If, in fact, the script includes an extra #! line, then bash will interpret it as a comment. #!/bin/bash echo "Part 1 of script." a=1 #!/bin/bash # This does *not* launch a new script. echo "Part 2 of script." echo $a # Value of $a stays at 1. [6] This allows some cute tricks. #!/bin/rm # Self−deleting script. # Nothing much seems to happen when you run this... except that the file disappears. WHATEVER=65 echo "This line will never print (betcha!)." exit $WHATEVER # Doesn't matter. The script will not exit here. Appendix N. Copyright 515 Advanced Bash−Scripting Guide Also, try starting a README file with a #!/bin/more, and making it executable. The result is a self−listing documentation file. [7] Portable Operating System Interface, an attempt to standardize UNIX−like OSes. The POSIX specifications are listed on the Open Group site. [8] Caution: invoking a Bash script by sh scriptname turns off Bash−specific extensions, and the script may therefore fail to execute. [9] A script needs read, as well as execute permission for it to run, since the shell needs to be able to read it. [10] Why not simply invoke the script with scriptname? If the directory you are in ($PWD) is where scriptname is located, why doesn't this work? This fails because, for security reasons, the current directory, "." is not included in a user's $PATH. It is therefore necessary to explicitly invoke the script in the current directory with a ./scriptname. [11] The shell does the brace expansion. The command itself acts upon the result of the expansion. [12] Exception: a code block in braces as part of a pipe may be run as a subshell. ls | { read firstline; read secondline; } # Error. The code block in braces runs as a subshell, # so the output of "ls" cannot be passed to variables within the block. echo "First line is $firstline; second line is $secondline" # Will not work. # Thanks, S.C. [13] The process calling the script sets the $0 parameter. By convention, this parameter is the name of the script. See the manpage for execv. [14] Encapsulating "!" within double quotes gives an error when used from the command line. Apparently this is interpreted as a history command. Within a script, though, this problem does not occur. Of more concern is the inconsistent behavior of "\" within double quotes. bash$ echo hello\! hello! bash$ echo "hello\!" hello\! bash$ echo −e x\ty xty bash$ echo −e "x\ty" x y (Thank you, Wayne Pollock, for pointing this out.) [15] "Word splitting", in this context, means dividing a character string into a number of separate and discrete arguments. [16] Be aware that suid binaries may open security holes and that the suid flag has no effect on shell scripts. [17] On modern Unix systems, the sticky bit is no longer used for files, only on directories. [18] Appendix N. Copyright 516 Advanced Bash−Scripting Guide As S.C. points out, in a compound test, even quoting the string variable might not suffice. [ −n "$string" −o "$a" = "$b" ] may cause an error with some versions of Bash if $string is empty. The safe way is to append an extra character to possibly empty variables, [ "x$string" != x −o "x$a" = "x$b" ] (the "x's" cancel out). The PID of the currently running script is $$, of course. The words "argument" and "parameter" are often used interchangeably. In the context of this document, they have the same precise meaning, that of a variable passed to a script or function. This applies to either command line arguments or parameters passed to a function. If $parameter is null in a non−interactive script, it will terminate with a 127 exit status (the Bash error code for "command not found"). These are shell builtins, whereas other loop commands, such as while and case, are keywords. An exception to this is the time command, listed in the official Bash documentation as a keyword. A option is an argument that acts as a flag, switching script behaviors on or off. The argument associated with a particular option indicates the behavior that the option (flag) switches on or off. The C source for a number of loadable builtins is typically found in the /usr/share/doc/bash−?.??/functions directory. Note that the −f option to enable is not portable to all systems. The same effect as autoload can be achieved with typeset −fu. These are files whose names begin with a dot, such as ~/.Xdefaults. Such filenames do not show up in a normal ls listing, and they cannot be deleted by an accidental rm −rf *. Dotfiles are generally used as setup and configuration files in a user's home directory. This is only true of the GNU version of tr, not the generic version often found on commercial Unix systems. A tar czvf archive_name.tar.gz * will include dotfiles in directories below the current working directory. This is an undocumented GNU tar "feature". This is a symmetric block cipher, used to encrypt files on a single system or local network, as opposed to the "public key" cipher class, of which pgp is a well−known example. A daemon is a background process not attached to a terminal session. Daemons perform designated services either at specified times or explicitly triggered by certain events. The word "daemon" means ghost in Greek, and there is certainly something mysterious, almost supernatural, about the way Unix daemons silently wander about behind the scenes, carrying out their appointed tasks. This is actually a script adapted from the Debian Linux distribution. The print queue is the group of jobs "waiting in line" to be printed. For an excellent overview of this topic, see Andy Vaught's article, Introduction to Named Pipes, in the September, 1997 issue of Linux Journal. EBCDIC (pronounced "ebb−sid−ic") is an acronym for Extended Binary Coded Decimal Interchange Code. This is an IBM data format no longer in much use. A bizarre application of the conv=ebcdic option of dd is as a quick 'n easy, but not very secure text file encoder. cat $file | dd conv=swab,ebcdic > $file_encrypted # Encode (looks like gibberish). # Might as well switch bytes (swab), too, for a little extra obscurity. [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] Appendix N. Copyright 517 Advanced Bash−Scripting Guide cat $file_encrypted | dd conv=swab,ascii > $file_plaintext # Decode. [37] A macro is a symbolic constant that expands into a command string or a set of operations on parameters. [38] This is the case on a Linux machine or a Unix system with disk quotas. [39] The userdel command will fail if the particular user being deleted is still logged on. [40] For more detail on burning CDRs, see Alex Withers' article, Creating CDs, in the October, 1999 issue of Linux Journal. [41] The −c option to mke2fs also invokes a check for bad blocks. [42] Operators of single−user Linux systems generally prefer something simpler for backups, such as tar. [43] NAND is the logical "not−and" operator. Its effect is somewhat similar to subtraction. [44] For purposes of command substitution, a command may be an external system command, an internal scripting builtin, or even a script function. [45] In a more technically correct sense, command substitution extracts the stdout of a command, then assigns it to a variable using the = operator. [46] A file descriptor is simply a number that the operating system assigns to an open file to keep track of it. Consider it a simplified version of a file pointer. It is analogous to a file handle in C. [47] Using file descriptor 5 might cause problems. When Bash creates a child process, as with exec, the child inherits fd 5 (see Chet Ramey's archived e−mail, SUBJECT: RE: File descriptor 5 is held open). Best leave this particular fd alone. [48] The simplest type of Regular Expression is a character string that retains its literal meaning, not containing any metacharacters. [49] Since sed, awk, and grep process single lines, there will usually not be a newline to match. In those cases where there is a newline in a multiple line expression, the dot will match the newline. #!/bin/bash sed −e 'N;s/.*/[&]/' << EOF line1 line2 EOF # OUTPUT: # [line1 # line2] # Here Document echo awk '{ $0=$1 "\n" $2; if (/line.1/) {print}}' << EOF line 1 line 2 EOF # OUTPUT: # line #1 # Thanks, S.C. exit 0 [50] Filename expansion can match dotfiles, but only if the pattern explicitly includes the dot. Appendix N. Copyright 518 Advanced Bash−Scripting Guide ~/[.]bashrc ~/?bashrc # Will not expand to ~/.bashrc # Neither will this. # Wild cards and metacharacters will not expand to a dot in globbing. # Will expand to ~./bashrc # Likewise. # Likewise. ~/.[b]ashrc ~/.ba?hrc ~/.bashr* # Setting the "dotglob" option turns this off. # Thanks, S.C. [51] This has the same effect as a named pipe (temp file), and, in fact, named pipes were at one time used in process substitution. [52] The return command is a Bash builtin. [53] Herbert Mayer defines recursion as "...expressing an algorithm by using a simpler version of that same algorithm..." A recursive function is one that calls itself. [54] Too many levels of recursion may crash a script with a segfault. #!/bin/bash # # Warning: Running this script could possibly lock up your system! If you're lucky, it will segfault before using up all available memory. recursive_function () { (( $1 < $2 )) && f $(( $1 + 1 )) $2; # As long as 1st parameter is less than 2nd, #+ increment 1st and recurse. } recursive_function 1 50000 # Recurse 50,000 levels! # Most likely segfaults (depending on stack size, set by ulimit −m). # Recursion this deep might cause even a C program to segfault, #+ by using up all the memory allotted to the stack. echo "This will probably not print." exit 0 # This script will not exit normally. # Thanks, Stephane Chazelas. [55] However, aliases do seem to expand positional parameters. [56] This does not apply to csh, tcsh, and other shells not related to or descended from the classic Bourne shell (sh). [57] The entries in /dev provide mount points for physical and virtual devices. These entries use very little drive space. Some devices, such as /dev/null, /dev/zero, and /dev/urandom are virtual. They are not actual physical devices and exist only in software. [58] A block device reads and/or writes data in chunks, or blocks, in contrast to a character device, which acesses data in character units. Examples of block devices are a hard drive and CD ROM drive. An example of a character device is a keyboard. [59] Certain system commands, such as procinfo, free, vmstat, lsdev, and uptime do this as well. [60] Rocky Bernstein's Bash debugger partially makes up for this lack. Appendix N. Copyright 519 Advanced Bash−Scripting Guide [61] By convention, signal 0 is assigned to exit. [62] Setting the suid permission on the script itself has no effect. [63] In this context, " magic numbers" have an entirely different meaning than the magic numbers used to designate file types. [64] ANSI is, of course, the acronym for the American National Standards Institute. [65] See Marius van Oers' article, Unix Shell Scripting Malware, and also the Denning reference in the bibliography. [66] Chet Ramey promises associative arrays (a Perl feature) in a future Bash release. [67] This is the notorious "flog it to death" technique. [68] Those who can, do. Those who can't... get an MCSE. [69] If no address range is specified, the default is all lines. [70] Out of range exit values can result in unpredictable exit codes. For example, exit 3809 gives an exit code of 225. [71] Some early Unix systems had a fast, small−capacity fixed disk (containing /, the root partition), and a second drive which was larger but slower (containing /usr and other partitions). The most frequently used programs and utilities therefore resided on the small−but−fast drive, in /bin, and the others on the slower drive, in /usr/bin. This likewise accounts for the split between /sbin and /usr/sbin, /lib and /usr/lib, etc. Appendix N. Copyright 520